TIRUPPUR CORPORATION_Z4_GF_Maintenance and Special Repaire work and Providing and fixing of Equipments Tools and plants to the Micro Compost Centre at Kuppandampalayam in ward no 53

Supply and Fixing of Sanitary napkin Destroyer machine machine with storage capacity of 100 napkins per day with dimension of 220mm x 220mm x 360mm of wall mounting style –No 1 Pcs etc.,

Supply and Fixing of Plastic crates of dimension 460mm * 520 mm with ISI standard etc.,

Supply and Fixing of Plastic barrels of measuring 800 litres with lid for storing of enzymes with ISI standard etc.,

Supply and Fixing of Plastic dustbin of measuring 250 litres for storing dry Waste on segregation etc.,

Supply and Fixing of Pest Controller of 64W with 360º inser Killer etc.,

Providing Safety gloves and apron for the workers with ISI standards etc.,

Supply and installation of Viberator separator Capacity of 1 ton/hr with Power 2hp motorAnd measuring of Size 3*6 feet and the installation to the required place as per instruction of Departmental officers etc complete.

Supply of powing tools and segegrator for the ground work of MCC compost tank with ISI standard and proper measuring length according to the requirement.

Supply of Industrial Making Trolly as per standard sixw using of Lead Purpose etc.,

Plastering with cement mortar 1:5 mix (one cement five P-sand), 12mm thick in all floors using clean screened M-Sand and including cost of curing for fifteen days from the completion of the work and surface should free from undulations and including the cost of preparing the surface for plastering and protecting from other damages till setting of mortar etc., complete complying with standard specification.

Painting two coats with approved Cement Paint over cement plastered wall surface, ceiling and other new surface including cleaning, preparing the surface and curing etc., complete as per standard specification.

Finishing the top of flooring with a layer of cement concrete 1:3 [one cement and three stone jelly] ELLIS PATTERN 20mm thick using 10mm thick and below gauge HBG stone (No sand to be added) and the surfaces rubbed smooth with current etc., complete complying with standard specification.

Wring With 2 x1.5 sqmm (22/0.3) PVC insulated sc unsheathed Cu Conductor of 1100V Grade in Suitable PVC Rigid Pipe concealed in wall and ceiling with pvc accessories in flush with wall with 3mm thick hylum sheet cover with TW switch box And 5A F.T switch with continous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable color of PVC concealed light point / Fan Point (For Electronic regulator ).

Supply and fixing of 20W 4 Feet LED Fitting as per standard specificatin

Supply and fixing of 1200mm (48") sweep AC ceiling fan complete with stepped electronic 300W regulator with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18")

Supply and run of 2 of 1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14SWG TC wire and making good of the concealed portion with suitable colour

Supply and delivery of 1" Green hose using of Mcc center etc.,

Supply and fixing of M.S Grills with Doors, Windows, Ventilators and Gates of required size suitable to site condition with one coat of red oxide with primer including all costs such as welding, grinding and fabrication charges, cost and conveyance of all materials to site etc., complete as per standard specification.

Painting two coats for New iron work surface using best quality synthetic enamel paint etc., complete complying with standard specification.

Dismantling and assembling the shredder machine's conveyor assembly, prime mover assembly including cost of labour charges for proper mechanical alignment free from vibration, transportation charges,incidental charges inclusive of material charges if any complete the work satisfaction of department officers

Providing shredder machines shaft bearings with housing , bolts and nuts with instant works

Providing shredder machines shaft pullies and belts to both sides of shredder machine assembly.

Providing beraing to plain and step belt conveyors Roller shaft assembly.

Labor charges for Fixing of Bearings to Plain and istep belt coveyor assembly with welding work , mechanical allignment including cost of trasnportation etc complete

Shredder machine double Frame work for the hopper and covers with 3MM ms sheets, MS square tube with welding and fixing work top and bottom sides including labor charges

Servcing of electrical starter panel, repalcing of overload relay and contactors of shredder machine with connecting and testing as per the required running conditions with load conditions

servcing of weighing scale , replacement of laod cells with clibration and testing charges

providing gears , rollers of shutter including labor and transportation pipe of 8 feet length. Spring winding,greasing and bottom plate bend removal. New Gear box key for shutter door

Supplying and fixing of Wet Waste Disposer shreading machine Conveyor belt and roller replacement, hopper replacement, 30 shaft Bed correction and blade changing including logistics and loading charges etc.,