PROVN OF SHED FOR STORAGE OF GRD MAINT EQPT AND X-COUNRTY JUMP, PROVN OF 02x STRAIGHT JUMPING LANE OF YOUNG HORSE AND RECTS AND REPAIR/ REPLECEMENT OF IRON GATE AT MAIN ENT OF OFFR MESS (BLDG P-456) AT ZONE-III UNDER GE (S) JAIPUR

Amount

14/LBW/61SA/2021-22/Q3W Excavating in post holes (or similar holes) each n.exc 0.50 cum and removing surplus soil to a distance n.exc 50 m and making good surface in soft/ loose soil. Complete all as specefied and as directed by Engineer-in-Charge. 14/LBW/61SA/2021-22/Q3W: 12 15/LBW/61SA/2021-22/Q3W: 180

M&L for PCC 1:3:6 type C2 using 40 mm graded stone aggregate in foundations, filling and mass concrete. Complete all as specefied and as directed by Engineer-in-Charge. 14/LBW/61SA/2021-22/Q3W: 2.5 15/LBW/61SA/2021-22/Q3W: 39

S&F Mild steel bolts. purpose made. with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. exc 30cm long, Diameter of neck n. exc 12 mm. Complete all as specefied and as directed by Engineer-in-Charge. 14/LBW/61SA/2021-22/Q3W: 25

S&F Fe 410 -W (Gde- E- 250) quality- A Rolled/ Hollow mild steel (structural) in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections/ (Square/ rectangular hollow tubes)) including distance pieces, cleats etc. Complete all as specefied and as directed by Engineer-in-Charge. 14/LBW/61SA/2021-22/Q3W: 9600

S&F Pre-painted galvalume aluminum zinc coating GI based Corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws. Complete all as specefied and as directed by Engineer-in-Charge. 14/LBW/61SA/2021-22/Q3W: 655

S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel Sheet 0.5mm Thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws. Complete all as specefied and as directed by Engineer-in-Charge. 14/LBW/61SA/2021-22/Q3W: 25

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft/loose soil. Complete all as specefied and as directed by Engineer-in-Charge. 14/LBW/61SA/2021-22/Q3W: B/R - 12.00 14/LBW/61SA/2021-22/Q3W: E/M - 22.00 31/SR/61SA/BLDG/2021-22/Q3W: : 22.00

M&L Brick work with subclass 'B' bricks (old size), straight or curved on plan exc 6 m mean radius built in cement mortar 1:4. Complete all as specefied and as directed by Engineer-in-Charge. 14/LBW/61SA/2021-22/Q3W: 30 15/LBW/61SA/2021-22/Q3W: 10

M&L rendering 10mm thick in cement mortar 1:4 on fair faces of brick masonry or concrete surfaces of walls, finished even & smooth without using extra cement. Complete all as specefied and as directed by Engineer-in-Charge. 14/LBW/61SA/2021-22/Q3W: 260

M&L preparation of new plastered surfaces of any description and applying two coats of cement base paint of approved shade on walls complete all as specified & directed by Engineer-in-Charge. 14/LBW/61SA/2021-22/Q3W: 260

M&L preparation of new untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer. Complete all as specefied and as directed by Engineer-in-Charge. 14/LBW/61SA/2021-22/Q3W: 70 15/LBW/61SA/2021-22/Q3W: 260 31/SR/61SA/BLDG/2021-22/Q3W: 60

Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil. Complete all as specefied and as directed by Engineer-in-Charge. 14/LBW/61SA/2021-22/Q3W: 620

M&L for 75 mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base to floor complete all as specified and as directed by Engineer-in-charge. 31/SR/61SA/BLDG/2021-22/Q3W:148

M&L 100 mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base to floor complete all as specified and as directed by Engineer-in-charge. 14/LBW/61SA/2021-22/Q3W: 625

Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-40 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. Complete all as specefied and as directed by Engineer-in-Charge. 14/LBW/61SA/2021-22/Q3W: 625

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. Complete all as specefied and as directed by Engineer-in-Charge. 31/SR/61SA/BLDG/2021-22/Q3W:148

Providing and laying at or near ground level precast factory made kerb stone made of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required. Complete all as specefied and as directed by Engineer-in-Charge. 14/LBW/61SA/2021-22/Q3W: 8.50 31/SR/61SA/BLDG/2021-22/Q3W: 4

M&L Point wiring with 1100 volts grade PVC insulated, FRLS multistranded copper conductor cable, PVC single core, sheathed cable 1.5 Sq. mm (nominal area) (Phase- Red, Neutral-- Black) and earth continuity conductor 1.5 sqmm (green) drawn into and including surface non metallic PVC conduit, medium grade, 20mm dia ISI marked ivory color with all conduit fittings/ fitting accessories and, ISI marked, with mild unwelded galvanised pressed steel terminal boxes of thickness not less than 1.2mm covered with 3mm phenoic laminated white sheet cover for mounting switches, sockets, fan regulators as required Complete all as specefied and as directed by Engineer-in-Charge for following;-

One light/fan controlled by one, one way switch. 14/LBW/61SA/2021-22/Q3W: 30

One 3 pin socket outlet 5 amps on the same board with other switches 14/LBW/61SA/2021-22/Q3W: 4

One 3 pin socket outlet, 5 amps on independent board, with cables 14/LBW/61SA/2021-22/Q3W: 8

All as per Item No 18 above but with 2.5 Sqmm copper conductor cable for 3 pin 15 Amps socket outlet on independent board, complete all as specified & as directed by Engr-in Charge. 14/LBW/61SA/2021-22/Q3W: 4

S&F switch, piano type 230/250 volts on top covers for the following:-

Switch piano flush button Single pole, one way 6 Amp rating 14/LBW/61SA/2021-22/Q3W: 42

Switch piano flush button Single pole, one way 16 Amp rating 14/LBW/61SA/2021-22/Q3W: 4

S&F Socket outlet multipurpose use flush type, 230/250 Volts grade on top covers. Complete all as specefied and as directed by Engineer-in-Charge.

Socket outlet 2 in 1, 3 pin 6 Amp flush type 14/LBW/61SA/2021-22/Q3W: 12

Socket outlet 3 pin 6 & 16 Amp flush type 14/LBW/61SA/2021-22/Q3W: 4

M&L Ceiling rose, 3 phase polycarbonate, isolated body. Complete all as specefied and as directed by Engineer-in-Charge. 14/LBW/61SA/2021-22/Q3W: 30

S&F hum free electronic step fan regulator 120-280 volts of 100 watt capacity (socket type) including connecting. Complete all as specefied and as directed by Engineer-in-Charge. 14/LBW/61SA/2021-22/Q3W: 12

S&F Energy saving environmental friendly, LED Light fittings 1 x 18 W 1200mm E lite complete with all accessories pre-wired twin core twisted flexible copper conductor cable of suitable size Complete all as specefied and as directed by Engineer-in-Charge of make Make : Syska cat No SSK-SQ 1801 or other approved equivalent make 14/LBW/61SA/2021-22/Q3W: 20

S&F factory made, sheet metal enclosures for distribution boards, 240 V, SP&N 8 ways, double door protection class IP-42 double door type suitable for mounting MCB/ MCCB, confirming to IS-13032, IS-8623, BS-5484 with minimum 200 amps, copper bus bar. Complete all as specefied and as directed byEngineer-in-Charge. 14/LBW/61SA/2021-22/Q3W: 2

S&F amp rating 240V, 10KA 'C'curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning, confirming to IS-8828, IEC-898, rupturing capacity of the under mentioned type and rating. Complete all as specefied and as directed by Engineer-in-Charge. :-

SP 5 to 32 AMP 14/LBW/61SA/2021-22/Q3W: 12

SPN 40 to 63 AMP 14/LBW/61SA/2021-22/Q3W: 2

M & L supplying, laying, connecting and testing in trenches, under floors/ roads or on walls Cable XLPE insulated screened PVC bedded galvanized steel strips or wire armored, electric power cables (heavy duty) ISI marked with stranded aluminium conductor, 1100 volts grade, of following size. Note : Excavation and earth work shall be measured and paid under specific item of schedule.

16 sqmm, 2 core 14/LBW/61SA/2021-22/Q3W: 100

10 sqmm, 2 core 31/SR/61SA/BLDG/2021-22/Q3W: 100

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25cm in soft /loose soil. Complete all as specefied and as directed by Engineer-in-Charge. 14/LBW/61SA/2021-22/Q3W: 15 31/SR/61SA/BLDG/2021-22/Q3W: 14 15/LBW/61SA/2021-22/Q3W: 5

Removing of excavated material obtained from excavation to a distance n.exc 50 metre and depositing where directed at a level n.exc 1.50metre above the starting point. Complete all as specefied and as directed by Engineer-in-Charge. 14/LBW/61SA/2021-22/Q3W: 7 31/SR/61SA/BLDG/2021-22/Q3W: 8 15/LBW/61SA/2021-22/Q3W: 7

M & L Sand cushioning to PVC under ground cable with screened and washed river sand and gently punning to provide a required cover. 14/LBW/61SA/2021-22/Q3W: 6 31/SR/61SA/BLDG/2021-22/Q3W: 6

M&L Old size bricks for protection cover to under ground cable (with sub class `B` bricks designation-75) with width equal to length of brick laid dry and flat abutting each other with gaps between adjacent brick not exceeding 10 mm. Complete all as specefied and as directed by Engineer-in-Charge. 14/LBW/61SA/2021-22/Q3W: 0.70 31/SR/61SA/BLDG/2021-22/Q3W: 1.00

S&F Ceiling fan size 1200mm sweep, 5 Star rating, 3 blades, white color, single phase AC, 230 Volts complete with all accessories pre-wired twin core twisted flexible copper conductor cable with suitable size. Complete all as specefied and as directed by Engineer-in-Charge. 14/LBW/61SA/2021-22/Q3W: 12

15/LBW/61SA/2021-22/Q3W : 7500 S&F MS Black Pipe 100mm bore conforming to IS 1161 grade Yst 240, medium grade, fixed in post holes for safety railing.Complete all as specefied and as directed by Engineer-in-Charge.

S&F MS Black Pipe 80mm bore conforming to IS 1161 grade Yst 240, medium grade, fixed in between verticle pipes with all necessary drilling holes, fittings, welding etc. for safety railing 15/LBW/61SA/2021-22/Q3W: 6500

S&F Fe-410-W (Gde.E-250) quality-A, Round bars Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip. Complete all as specefied and as directed byEngineer-in-Charge. 15/LBW/61SA/2021-22/Q3W: 420

Demolition of Brickwork or stone/ boulder masonry , built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles. Complete all as specefied and as directed byEngineer-in-Charge. 15/LBW/61SA/2021-22/Q3W: 10

M&L rendering 15mm thick in cement mortar 1:4 on fair faces of brick masonry or concrete surfaces of walls, finished fair and even. Complete all as specefied and as directed by Engineer-in-Charge. 15/LBW/61SA/2021-22/Q3W: 250 31/SR/61SA/BLDG/2021-22/Q3W: 10

31/SR/61SA/BLDG/2021-22/Q3W: 2.5 Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for, Complete all as specefied and as directed by Engineer-in-Charge.

Demolition Stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar 31/SR/61SA/BLDG/2021-22/Q3W: 2

M&L 25 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win- dow-cills, cooking plat- forms and like in cement mortar (1:4) including point- ing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. Complete all as specefied and as directed by Engineer-in-Charge. 31/SR/61SA/BLDG/2021-22/Q3W: 20

M&L preparation of new plastered surfaces and applying two coats of weather based paint of approved shade on walls over a coat of 1mm thick wall care putty. Complete all as specefied and as directed by Engineer-in-Charge. 31/SR/61SA/BLDG/2021-22/Q3W: 10

Dismantling structural steel work in- cluding doors, gates but excluding framed truss etc. Complete all as specefied and as directed by Engineer-in-Charge. 31/SR/61SA/BLDG/2021-22/Q3W: 12.50

M&L Fe 410 -W (Gde- E- 250) quality- A, Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing. Complete all as specefied and as directed by Engineer-in-Charge. 31/SR/61SA/BLDG/2021-22/Q3W: 1250

Demolition of concrete in ground floors and pavings n exc. 15 cm thick (below or above ground level). Complete all as specefied and as directed by Engineer-in-Charge. 31/SR/61SA/BLDG/2021-22/Q3W: 20

S&F PVC insulated multi stranded copper conductor wire ISI marked of size 2.5 Sqmm running through GI bracket from fitting to pole/ junction box. Complete all as specefied and as directed by Engineer-in-Charge. 31/SR/61SA/BLDG/2021-22/Q3W: 20

S&F decorative LED Globe light (Moon Prismatic) made up of high grade unbreakable polycarbonate material suitable for B-22 base (retrofit) with 15 Watt LED lamp Complete all as specefied and as directed by Engineer-in-Charge. Make: Havells Cat No. LHFXBO1TN6F035 and Havells 15W LED Cool Day Light Bulb (White) or equivalent 31/SR/61SA/BLDG/2021-22/Q3W: 2

M&L 40mm bore of tube Tubes,'light grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors. Complete all as specefied and as directed by Engineer-in-Charge. 31/SR/61SA/BLDG/2021-22/Q3W: 2.50

S&F factory made, sheet metal enclosures for distribution boards, 240 V, SP&N 4 ways, single door protection class IP-42 double door type suitable for mounting MCB/ MCCB, confirming to IS-13032, IS-8623, BS-5484 with minimum 200 amps, copper bus bar. Complete all as specefied and as directed by Engineer-in-Charge. 31/SR/61SA/BLDG/2021-22/Q3W: 2

MSR INFRATECH

M/S JALANDRA CONSTRUCTIONS

M/S Mohan Lal Gupta