IYOTHEE THASS PANDITHAR HABITATION DEVELOPMENT SCHEME-2023-2024

Amount

Drilling of borewells in Tamilnadu including transportation from one place to another place with in Tamilnadu in alluvial soil sedimentary strata of clay and sand stone shale pebbles boulders etc., by first taking a Pilot Bore of 140mm/150mm dia and then enlarging to required dia direct or reverse rotary mud circulation method using rotary rig including fuel, Labour and drilling bentonite and water required for drilling at site including construction of mud pit etc., complete.

Reaming from 140mm/150mm dia pilot bore to 300mm dia bore as directed by departmental officers etc., complete

Cost and supply of PVC 150mm dia casing pipe including cost and conveyance of pipe and stacking at site etc., complete a) 150mm dia PVC Plain Casing Medium Pipe

Cost and supply of PVC 150mm dia casing pipe including cost and conveyance of pipe and stacking at site etc., complete b) 150mm dia PVC Ribbed Screen Pipe

Cost and supply of PVC 150mm dia casing pipe including cost and conveyance of pipe and stacking at site etc., complete c) 160mm dia PVC End Cap

Labour Charges for inserting 150mm dia PVC casing pipes assembly (with slots or without slots) in the drilled hole including jointing the pipes with PVC couplers with cement paste etc., complete supply and packing the annular space with pebbles of size and quality as approved by the departmental officers

Charges for developing the bore well with air compressor of 600 CFM capacity ( minimum 8 hours) including transportation labour and fuel charges for compressor as directed by the departmental officers and conducting yiels test by "V" notch method

Cost and supply of 3 phase submersible pumpset as per IS 8034 suitable for 150mm dia bore well with ISI mark 3 HP 100 lpm x 75 m etc., complete.

Cost and supply of 3 phase panel board 50mm dia HDPE pipe and coupling submersible cable GI clamp etc., complete a) 3 HP - 3 Phase Panel Board - Star Delta with Two Level Guard and Auto Start

Cost and supply of 3 phase panel board 50mm dia HDPE pipe and coupling submersible cable GI clamp etc., complete b) 50mm dia HDPE Pipes - PN16

Cost and supply of 3 phase panel board 50mm dia HDPE pipe and coupling submersible cable GI clamp etc., complete c) 50mm dia PVC Coupling

Cost and supply of 3 phase panel board 50mm dia HDPE pipe and coupling submersible cable GI clamp etc., complete d) 50mm dia MS Clamp Set

Cost and supply of 3 phase panel board 50mm dia HDPE pipe and coupling submersible cable GI clamp etc., complete e) 50mm dia GM Gate Valve

Cost and supply of 3 phase panel board 50mm dia HDPE pipe and coupling submersible cable GI clamp etc., complete f) Submersible Cable 3 Core 4 Sqmm

Conveyance of power pumpset ( centrifugal jet and submersible) and its accessories from divisional stores to site of works

Labour charges for erection of Submersible Pumpset in Borewell/ Openwell including fixing and jointing submersible cable with proper clamps, pressure gauge upto the starter to require depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauge upto the exterior wall of pumproom and erection of panel board consisting of TPICN switches, starter, voltmeter, ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level gaurd and laying and jointing cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10days.

Earthwork excavation and depositing on bank with an intial lead of 10m and lift of 2m in the following classification of soils as directed by Department officers. Hard stiff clay black cotton, hard red earth shales, murram, ordinary gravel, stoney earth and earth mixed with small size boulders for foundation SS 20B

Supply and filling with Stone Dust including cost and conveyance from approved quarry to site and all labour charges for filling, levelling, compacting, watering with all leads for water etc., complete as per Standard Specification

Plain Cement concrete of mix 1:4:8 (One part cement, four part sand & eight part aggregates) using 40mm gauge hard broken including cost conveyance of all materials to site including labour charges for mixing, placing, ramming, curing, finishing etc, complete.

Supplying and fabrication of steel and placing in position of TMT steel rods for RCC works as per design given including cost of steel and GI binding wire in all floors etc., complete complying with standard specification in TNDSS NO:97 V,VI (S6) VII (S6), VII-3.

Reinforced Cement Concrete 1:1½:3 Mix (One part cement, one and half part sand and three part of aggregate)using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing but excluding cost of reinforcement etc. Complete with std. Specifications. TNDSS NO: 30 V, VI (S3), VII-3.

Centering and Shuttering for sides & soffit of RCC works using MS Sheet / Country Wood Plank Shutters supported by necessary casurina props / wedges including cost and hire charges of all materials to site and all labour charges etc. Complete as per standard specification as per TNDSS NO : 30 & 86.

Brick work in Cement Mortar in 1:5 ( One cement and Five Sand ) using best quality of Stock bricks of size 8¾x 4¼ x 2¾ including all cost of materials and labour charges including Curing charges etc., complete as per Standard Specification.

Plastering with cement motor 1:3mix to 10mm for ceiling including cost and conveyance of all materials from approved quarry to site and all labour charges etc., complete as per Standard Specification

Plastering with cement motor 1:4mix to 12mm thick including cost and conveyance of all materials from approved quarry to site and all labour charges etc., complete as per Standard Specification

Supply and Delivery Fabrication of MS doors and windows with outer frame and shutter frame in MS angle of size 40mm x 40mm x 6 mm with MS flat 25mm x 25mm x 6mm and MS sheet of 18 gauge including ventilating arrangements using 20mm square MS rods with locking arrangements including two coats of approved enamel paint over coat of red oxide including cost of angles, plates, sheets, fabrication charges, cost of hold fast and transportation charges etc., complete. - Single Leaf Door of Size 0.90m x 2.00m

White Washing two coats with Distemper of approved colour and quality including cost and conveyance, preparation of surface and finishing neatly etc., complete complying with standard specification and as directed by the department officers

Painting two coats of newly plastered wall surface with approved cement paint over cement plastered wall surface, ceiling and including preparing the surface, clean removal of dirt and including necessary plaster of paris putty wherever required and cost of painting materials, brushes, preparation of surfaces and scaffolding charges etc., complete complying with standard specification and as directed by the departmental officer

Painting the new iron work with two coats of best pproved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat and including cost of painting materials, brushes, putty, preparation of surfaces and scaffolding charges etc., complete complying with standard specification and as directed by the departmental officer.

Supply and fixing of MS Grill Gate & MS Grills for Compound Wall including cost and conveyance of all materials and all other labour chages and fabrication charges etc. complete as per Standard Specification.

Centering and Shuttering for sides & soffit of PCC works using MS Sheet / Country Wood Plank Shutters supported by necessary casurina props / wedges including cost and hire charges of all materials to site and all labour charges etc. Complete as per standard specification as per TNDSS NO : 30 & 86.

Plain Cement Concrete 1:2:4 Mix (one part cement, two part sand and four part of aggrigate) using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc., complete as per TNDSS NO: 28 & VI (S2) VI (S5A) VII standard specifications as directed by Engineer incharge.

Providing and laying, spreading and compacting graded stone aggregates to Wet Mix Macadam 250mm thick specification including premixing the materials with water at OMC in mechnanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in Sub Base/ Base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause 406 of MORTH

Supplying and laying Precast Designer Paver Block confirming to IS 1568-2006 specification manufacturing and laying standard of M40 grade 83mm thick (table clauses 5 and 9.14) suitable for bus terminals industrial complexes road on expensive soils etc., including the cost of paver block of size 225mm x 12.50 mm x 80mm and conveyance of materials to work site mentioned in the tender schedule cost of loading and unloading handling during over sand bed of 150mm thick (excluding the cost of sand) conveyance paver block cutter to site and hire charges of vibrators and block cutter operator and labour for leveling the sand to paver block etc., complete ISI 15658-2006.

Supply and delivery and fixing of HDPE tank 2000 Litres Capacity as per IS 12701 / 1996 including loading unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc., complete