Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.5 LAccepted-AOC SURVEY NO 93 392 PACHMARHI NEAR MILITARY HOSPITAL PAHMARHI HOSHANGABAD M P 461 881 | PACHMARHI | HOSHANGABAD | MADHYA PRADESH | 461881 | L1 | Accepted-AOC L1 | |
| 2 | L2₹4.6 L+₹99,122 (27.8%)Rejected-Finance NEAR BUS STAND PACHMARHI MP PIN 461881 | PACHMARHI | HOSHANGABAD | MADHYA PRADESH | 461881 | L2 | Rejected-Finance DUE TO L2 BIDDER | |
| 3 | L3₹4.6 L+₹1.0 L (28.9%)Rejected-Finance 93 4 16A BLOCK NO 3 JAWAHAR CHOWK PACHMARHI MP 461881 | PACHMARHI | HOSHANGABAD | MADHYA PRADESH | 461881 | L3 | Rejected-Finance DUE TO L3 BIDDER |
Tender Value
Refer Docs
EMD Value
₹9,620
Closing Date
14 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE Indpt Pachmarhi
AGE Indpt Pachmarhi Dist- Hoshangabad (MP)-461881
SPL REPAIR TO NCOs GUEST ROOM AT AEC TRG COLLEGE AND CENTRE
2023_MES_622887_1
CA No. AGE(I)/PACH/of 2023-24(8572/E8)
Open Tender
Civil Works
Item Rate
180 days
AGE Indpt Pachmarhi Dist- Hoshangabad (MP)-461881
E Class category a(i)
7 documents required · 7 mandatory
₹300
AGE(I) PACHMARHI
₹9,620
15 Dec 2023
12 Oct 2023
16 Nov 2023
12 Oct 2023
14 Nov 2023
26 Oct 2023
Amount
M&L glazed ceremic color tiles in vertical surfaces 350x250x7 mm/450x350x7mm thick, set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 10 mm thick rendering in CM (1:4) & Dismantling floor hearth or wall tilling and removing rubbish off the premises complete all as specfied and directed.
M&L non-skid coloured ceremic tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:6) & dismantling floor hearth or wall tilling and removing rubbish off the premises. complete all as specfied and directed.
Mirror polish on kota stone where ever required to give high glossy finish over exsiting floor complete all as specfied and directed.
Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed.
M & L 20 - 25 mm thick machine cut Kota stone slab in flooring or treads single piece of steps over and including 20mm thick screed bed in cement mortar 1:6, laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing & complete all as specified and as directed. Note:- The size of Kota stone slab shall not less than 550 mm x 550 mm cut size, except the location where the balance portion remain less than size complete all as specfied and directed.
M&L for 20 mm thick granite slab (of any type & black colour) work (table rubbed and polished) in cooking platforms, steps, window cills, incl edge moulding & cutting holes for gas pipe through drill machine and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete.
M&L for Brick work with sub class `B` bricks straight or curved on plan exc 6 m mean radius built in cement mortar( 1:6) including Demolition of brick work or stone masonry built in cement mortar including all quoins, pillars, arches etc. but excluding ashlar facings, dressed stone work and precast concrete articles, complete all as specified and as directed.
Taking down cement plaster on wall/ceiling/roof etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed.
M&L 15 mm thick rendering on fair faces of bk/concrete surfaces in CM (1:6) finished even and smooth (without using extra cement ) complete all as specfied and directed.
M&L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete all as specfied and directed. Note : Liquid WPC will be measured and paid separately.
Supply only liquid water proofing compound , ISI marked complete all as specfied and directed.
M & L for preparation of newly plastered surfaces of wall & concrete and applying 3 mm thick wall care putty including preparation complete all as specfied and directed.
M&L for applying two coats of oil bound distemper on wall or concrete over a coat of primer on prepared surfaces including, rubbing with sand paper complete all as specfied and directed.
M & L applying two coats of cement based paint on old decorative wall surface including preparation of surfaces, complete all as specfied and directed.
Taking down Chowkhats or frames exc 1.5 sqmnot e xc. 4 sq. m each with shutters (without taking off shutters from the frames) complete all as specfied and directed.
Taking down chowkhats or frames with shutters ( without taking off shutters from the frames) area n.exc 1.5 sqm each complete all as specfied and directed.
Cutting holes in brick walls exc 1/2 brick & n exc full brick built in cement mortar for inserting hold fasts, cutting and preparation of brick wall for insertion of doors, windows & ventilator and making good dismantled portion in cement mortar 1:3 etc complete all as specfied and directed.
M&L Aluminium powder coated (powder coated of requried colour) three track sliding windows frame top & sides of size 92x31.75x1.50 mm (section No 20831), bottom size 92x31.75x1.50mm (section No 20832) and shutter top & bottom of size 40x18x1.55mm (section No 20736) and sides (handle) of size 40x18x1.55mm (section No 20738) and lock side shutter frame of size 40x18x1.45mm ( section No 20737)" with including and fixing rubber gasket, beading and locking arrangement including making good to the disturbed portion complete including & fixing stainless steel wire mesh 0.36mm nominal dia of wire with 1.40mm average aperture and fixed with stainless steel wire staples and including and fixing 5mm thick glass with necessary rubber beading gasket etc including necessary plaster, painting ,cill and making good to disturbed portion complete all as specfied and directed.
S&F aluminium powder coted ventilator louvers type frame top and bottom of size 31x42x1.60mm(sec no-20558) rectaular tube of size 40x20x2 mm (sec no-14019 and middle verticalof size 42x46.20x1.60mm sec(20560) and clip for fixing wiremesh and glass of size 19x17.30x0.90mm (sec no-19360)thick including and fixing stainless steel wire cloth 0.36mm niminal dia of wire and 1.40mm average width of aperature and fixed with stainless steel wire staples and supply and fixing 5mm thick louvers with blades of 100 mm heavy duty with neccessary rubber beading ,gasket etcincluding necessary plaster, painting ,cill and making good to disturbed portion complete all as specfied and directed.
S&F aluminium anodised grill of 7.00 mm dia squares rectangular triangular circular shape aperture n.exc 7.00cm in length or width fixed with H or F channel complete all as specfied and directed.
S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube supplying & fixing in opening complete all as specfied and directed.
S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification complete all as specfied and directed.
S&F for sliding door bolt of Aluminium alloy anodised 250 mm complete all as specfied and directed.
S&F Butt hinges (ISI marked), medium weight, cold rolled mild steel of size 100 mm complete all as specfied and directed.
S&F 150 mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specfied and directed.
S&F 150 mm extruded aluminium alloy handles, fabricated type anodised complete all as specfied and directed.
S & F including dismantling rotational moulded polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed in position 500 ltrs capacity including dismantling of existing water tank of any description, complete all as specfied and directed.
S&F ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for 20mm dia iron pipe and fixed.(Minimum weight 210gm) complete all as specfied and directed.
S&F including taking down medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 15 mm bore GI tubing complete all as specfied and directed.
S&F including taking down medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 20 mm bore GI tubing complete all as specfied and directed.
S&F in repair bib tap 15 mm bore fancy type, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specfied and directed.
S&F in repair CP brass tubular towel rail 20 mm dia D type 60 cm long between flanges complete all as specfied and directed.
S&F in repair for 15 mm bore fancy type Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specfied and directed.
S & F for in repair brass chromium plated shower rose 125 mm size chromium plated shower roses with or without swivel joints, any size including fixing to steel pipe or union complete all specified and directed.
S&F in repair stop cock 15 mm bore fancy type chromium plated, with capstan head, high pressure, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe complete all as specfied and directed.
S&F in repair of stainless steel soap dish, of standard size and shape complete.
S&F in repair vitereous china wash basin, white flat back, size 550x400 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets, incl 32 mm dia brass CP waste fittings (coupling) including 32 mm waste pipe complete all as specfied and directed.
Supply only 15mm dia pillar taps cast copper alloy chromium plated ,screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts screwed for iron pipe (bore of pipe 15mm) complete all as specfied and directed.
S&F in repair vitreous china wash down water closet pan (Pedestal pattern)white including fixing bolt and plastic water closet seat white closed pattern with flat bottom cover with MS chromium plated hinging devices to matching colour complete all as specfied and directed.
S&F in repair 10 Ltr capacity PVC valveless shyphonic action type low level flushing cistern white with inlet, ball valve, float valve and handle incl bracket and flush pipe of low level of 32mm dia fixed to wall complete all as specfied and directed.
S & F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in positioncomplete all as specfied and directed.
Supply only PVC connection 15mm size with PTMT nut of length 300mm complete all as specfied and directed.
S&F in repair stainless steel sink with draining board, made out of 1.00 mm thick sheet for kitchen or laboratory with plug, washers, waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mmx 330mmx160mm, including waste coupling & waste pipe complete all as specified and directed.
Taking down AC/PVC pipes (including all fittings), with spigot and socket ends and lead joints including burning out joints of 100/75 mm dia pipe complete all as specfied and directed.
S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as specfied and directed.
S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as specfied and directed.
M/L PVC(SWR) bend of 110mm dia of any radius etc complete all as specified and directed.
M/L PVC(SWR) Tee of 110mm dia etc complete all as specified and directed.
S&F PVC (SWR) bends any radius provided with access door of 75 mm dia complete all as specfied and directed.
S&F PVC (SWR) branch pieces, single (equal or un equal) , ordinary or inverted (spigot or socket type) or with parralled branches of 110 mm dia with access door complete all as specfied and directed.
S&F PVC (SWR) multi floor trap, plain with grating with or without waste hole including jointing with solvent cement 75mm dia etc complete all as specfied and directed.
M&L Preparing old wooden surfaces exceeding 10Cm in width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specfied and directed.
M&L Preparing old steel surfaces/roof surfaces exceeding 10Cm in width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specfied and directed.
Demolition of cement concrete (reinforced) in ground floor and paving n.exc 15 cm below or above ground level complete all as specfied and directed.
M&L for RCC 1:2:4 with 20 mm graded aggregate in slap supported on wall, beam & coloumn in any location complete all as specfied and directed.
S&F mild steel TMT bar, 10mm dia and over cut to length, bent to shape required, inclduing cranking, bending, hooking ends and binding with mild steel annealed wire not less than 0.9 mm dia conforming to IS-432 complete all as specfied and directed.
Demolition of cement concrete in ground floor and paving n.exc 15 cm below or above ground level complete all as specfied and directed.
M&L for 75mm thick PCC (1:3:6), type C-2 using 40mm graded stone aggregate as in plinth protection, surface finished even & smooth without using extra cement, with and including joint filling (Size 30mm deep x 10mm wide) with sealing compound grade-A at 3m interwal and corner complete all as specified and directed.
M & L for preparation of new steel surfaces any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete all as specfied and directed.
Dismantling timber scantlings as in framed work 40 sq. cm and over in section, in any position complete all as specfied and directed.
S&F for MS framed works as in trusses, purline, rafters, column square/rectangular, round or angle section, fixed with and including iron cleats or other connected plates flate iron wind ties etc incl bending of MS section as requried complete all as specfied and directed.
S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/clading to wall, fixed with self tapping screws as specified including dismantling plain or corrugated steel sheeting, any gauge, thickness, in roof covering complete all as specfied and directed.
S&F pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in ridges, roof covering/clading to wall, fixed with self tapping screws as specified including dismantling plain or corrugated steel sheeting, any gauge, thickness, in roof covering complete all as specfied and directed.
M&L for suspended false ceilling comprising of 6mm thick non asbestos fibre cement bulding boards fixed or laid/inserted to GI frame work with screws over Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long including dismantling of wall and ceiling board or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specfied and directed.
M&L for 100mm thick PCC, type D2 (1:4:8) using 40mm graded stone aggt in sub base complete all as specfied and directed.
M&L 25 mm thick cement concrete 1:2:4 type B 0(using 12.5mm graded aggregate) as in paving fair and even complete all as specified and directed.
M&L for chequered cement concrete tiles 25mm thick etc set in floor and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles laid with and including over 15mm thick screed bed in CM (1:6) complete all as specified and directed, area of each tiles shall be of following
S&F in repair Harrison rails, anodised aluminium alloy , chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed.
Taking down carefully surface aluminium or copper point wiring with PVC casing-caping (light, fan, socket, bell or power) including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc and making good disturbed surfaces complete all as specified and directed.
Point wiring with 1100 volts grade PVC insulated FR -LSH multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal boxes of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for one light point controlled by one switch complete all as specified and directed.
All as per item No 71 above but one Exhaust fan point controlled by one switch complete all as specified and directed.
All as per item No 71 above but one socket outlet 6 amp controlled by one switch on the same board with other switches complete all as specified and directed.
All as per item No 71 above but one socket outlet 6 amp controlled by one switch on indepdendent board complete all as specified and directed.
Point wiring with 1100 volts grade PVC insulated FR LSH multistranded copper conductor cable 2.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal box of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for one 16 amp socket outlet controlled by one switch on independent board complete all as specified and directed.
S&F angle holder, insulated polycabonate body with back plate complete all as specified and directed.
S&F switch piano flush button single pole one way 6 amp complete all as specified and directed.
All as per item No 77 above but 16 amp complete all as specified and directed.
S&F socket outlet 2 in 1, 3 pin 6 & 16 amp complete all as specified and directed.
All as per item No 79 above but 6 amp complete all as specified and directed.
S&F MCB distribution board SPN, 240 volts, 4 ways powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces complete all as specified and directed.
S&F ceiling rose 6 amp, 3 plates polycarbonate bodycomplete all as specified and directed.
M&L for submain wiring alongwith earth continuity conductor with PVC insulated FR-LSH multistranded copper conductor cable (Phase - Red, Neutral - Black, Earth - Green) drawing into and including concealed rigid non metallic PVC conduit, medium grade, ISI marked ivory colour 20 mm dia along with accessories of nominal sizes 2x4 sqmm + 1x4 sqmm earth continuity conductor complete all as specified and directed.
S&F LED batten (1.2 m) made of CRCA sheet housing with a PC glossy difusser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficacy of 105 lumens per watt and total power consumption not more than 19 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a color temperature of 6500K, CRI>80, THD < 10% and PF > 0.95 complete all as specified and directed.
S&F LED light fitting mirror type with high putput diffuser 2 feet 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
S&F Single pole 6 to 32 amp MCBs as per load requirement 'C' series of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size complete all as specified and directed.
All as per item No 86 above but single pole and neutral (SPN) 40 amp complete all as specified and directed.
S&F Ventilation fan 150mm sweep exceptionally super silent operation, automaic front openting to prevent entry of foreign objects and easy maintainance and cleaning complete all as specified and directed.
S&F Water heater 25 litre capacity BEE star rating 5, vertical pattern in approved colour heating elemnt 2.0 KW , adjustable temperature setting knob for temperature setting between 25C to 75C, outer tank made of metallic engineering, inner tank made of extra thick superior cold rolled steel provided with high density PUF insulation complete all as specified and directed.
Taking down MCB distribution boards with incoming and outgoing controls any make, any capacity after disconnecting complete all as specified and directed.
Taking down carefully aluminium or copper submain wiring with PVC surface conduit or casing caping and making good disturbed surfaces complete all as specified and directed.
SUBIR KUMAR ROY
DEEPAK JAISWAL
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .