REPAIRS / MAINT OF INTERNAL ELECTRIFICATION INCLUDING ALLIED WORKS AT WING II AND III AREA UNDER GE NASIK ROAD.

Amount

Taking down carefully copper/aluminium point wiring complete alongwith board, casing patti/ PVC conduit removing materials to store and making good to disturb surfaces of wall/floors etc as specified & directed.

M&L for Point wiring with 1.5 Sqmm (22/0.30mm) PVC insulated and unsheathed multistranded copper conductor cable, 1100 volts grade, ISI marked, FRLS type drawn through and including PVC concealed conduit (ISI marked) of adequate size and its accessories with sunk cast iron/pressed steel terminal boxes of size 1.2mm thick, with 3mm thick plastic laminated sheet cover of adequate size for one light or one fan point controlled by one switch incl 1.5 Sqmm (nominal area) copper conductor cable (multistrand), FRLS type, PVC insulated and unsheathed with colour code earth wire connected to common earth dolly at one end and metalic bodies of luminaires/ fan at other end complete all as specified and directed for the following:- Note:- Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall, floors etc

all as per Item No.2.00 above but for One light point/ fan point controlled by one, one way swtich.

all as per Item No.2.00 above but for One 5 Amp 5 pin socket outlet point on same board with other switches including earth wire as specified.

all as per Item No.2.00 above but with 4.0 Sqmm (36/0.30mm) PVC copper stranded cable FRLS type for one 15 Amp 6 pin socket outlet point including PVC cable 4 Sqmm FRLS type copper stranded conductor as earth wire as specified & connected to commen earth & earth terminals including boards for mounting purposes.

All as per ser item No. 2.00 above here in before but on independent board.

All as per Item No.2.00 above but for one light point controlled by 2 way switches.

All as per Item No.2.00 above but one bell/buzzer point controlled by one push button on the same board with other switches or independent.

M&L for Point wiring with 1.5 Sqmm (22/0.30mm) PVC insulated and unsheathed multistranded copper conductor cable, 1100 volts grade, ISI marked, FRLS type drawn through and including PVC casing and caping (ISI marked) of adequate size and its accessories with PVC boxes, frames for modular fixtures of adequate size, for one light or one fan point controlled by one switch incl 1.5 Sqmm (nominal area) copper conductor cable (multistrand), FRLS type, PVC insulated and unsheathed with colour code earth wire connected to common earth dolly at one end and metalic bodies of luminaires/ fan at other end complete all as specified and directed for the following:-

All as per Item No.3.00 above but for One light point and one fan point controlled by one, one way swtich.

All as per Item No.3.00 above but for One 5 Amp 5 pin socket outlet point on same board with other switches including earth wire as specified.

All as per Item No.3.00 above but on independent board.

All as per Item No.3.00 above but for one light point controlled by 2 way switches.

All as per Item No.3.00 above but one bell/buzzer point controlled by one push button on the same board with other switches or independent.

All as per Item No.3.00 above but with 2.5 Sqmm (36/0.30mm) PVC copper stranded cable FRLS type for one 15 Amp 6 pin socket outlet point including PVC cable 2.5 Sqmm FRLS type copper stranded conductor as earth wire as specified & connected to commen earth & earth terminals including Fibre insulation boards, treated on one face only of adequate size for mounting purposes.

Supply and fixing in replacement of switch modular type 6 Amps one way AC 230 Volts.

Supply and fixing in replacement of switch modular type 16 Amps one way AC 230 Volts.

Supply and fixing in replacement of modular type bell push 6 Amps, AC 230 Volts.

Supply and fixing in replacement of modular type socket 6 Amps 2/3 pin combined, AC 230 Volts.

Supply and fixing in replacement of modular type socket 6/16 Amps 2/3 pin combined, AC 230 Volts.

Supply and fixing in replacement of modular type fan regulator, AC 230 Volts.

Supply and fixing in replacement of modular white cover plate with frame, 2 module.

Supply and fixing in replacement of modular white cover plate with frame, 4 module.

Supply and fixing in replacement of modular white cover plate with frame, 8 module.

Supply and fixing in replacement of modular white cover plate with frame, 12 module.

Supply and fixing in replacement of switch piano flush button 5 Amp single pole one way 230 volts white finish all as specified & directed.

Supply and fixing in replacement of socket outlet flush type 5 pin 5 Amp multipurpose 230 volts single pole one way suitable for 3 pin/2pin 5 Amp plug top white/ivory finish all as specified & directed.

Supply and fixing in replacement of switch socket combination flush type 5 pin 5 Amp multipurpose 230 volts single pole one way suitable for 3 pin/2pin 5 Amp plug top white/ivory finish all as specified & directed.

Supply and fixing in replacement of switch socket combination multipurpose flush type 2 in 1 type (3 and 3 pin) 5/15 Amps, 230V, AC.

Supply and fix in replacement lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings with invertor LED bulb 9 watt complete all as specified and directed

Supply and fix in replacement ceiling rose surface PVC 50mm dia 3 terminals including PVC mounting block white/ivory finish.

Supply and fixing in replacement of bell push, flush type, 5 Amp single pole, 230 volts white finish all as specified & directed.

Supply and fixing in replacement of switch piano flush button 5 Amp single pole 2 way 230 volts white finish all as specified & directed.

M&L for in replacement and connecting up fan regulator electronic on existing phenolic laminated sheet dimmer type 230 volts, 450 watts suitable for ceiling fan 1200/1400mm sweep.

Supply and fixing in replacement of 20 Watt LED 6500 K inverter LED batten with square profile and aluminium batten channel in anodized finish. Lithium Ion battery with charging time 8hours-10 hours and back up time upto 4 hours.

Supply and fixing in replacement of LED 20 Watt inverter LED batten with rod complete with lithium ion battery with charging time 8-10 hours and backup time upto 4 hours mounted on square box of suitable size connecting up with three core flexible copper conductor cable of suitable size from ceiling rose.

Supply and fixing in replacement of LED 10 Watt inverter LED batten with rod complete with lithium ion battery with charging time 8-10 hours and backup time upto 4 hours mounted on square box of suitable size connecting up with three core flexible copper conductor cable of suitable size from ceiling rose.

Supply and fixing in replacement of buzzer, AC, 230 volts, single phase complete all as specified and directed.

Supply and fixing in replacement of bell, AC, 230 volts, single phase complete all as specified and directed.

Supply and fixing in replacement of Decorative LED post top lantern, high PF, 40 Watt, energy saving and environmental friendly long life versatile pressure die cast aluminium housing, 360 degree indirect light, optimum light output, IP 65 protection, glare-free and better uniformty, 240 Volts complete all as specified and directed.

Supply and fixing in replacement of sheet metal enclosures with plug socket single pole and neutral with two pin and earth plug and with one MCB of 20 Amps (SP) complete all as specified.

Supply and fixing in replacement of submain wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 10 Sqmm drawn through in and including PVC heavy duty surface casing caping including 10 Sqmm 1100Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed.

Supply and fixing in replacement of submain wiring with four single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 6 Sqmm drawn through in and including PVC heavy duty surface casing caping including 6 Sqmm 1100Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed. Note :- (i) Four runs of cables and one run of continuous earting cable drawn in casing and caping will be measured as one length of sub main. (ii) PVC casing caping and its accessories is deem to be included in this item rates. (iii) Unit rate include for cutting chases for sinking for boxes and making good to wall, floors etc.

Supply and fixing in replacement of submain wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 4 Sqmm drawn through in and including PVC heavy duty surface casing caping including 4 Sqmm 1100Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed.

Supply and fixing in replacement of submain wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 2.5 Sqmm drawn through in and including PVC heavy duty surface casing caping including 2.5 Sqmm 1100Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed. Note for Srl item No 30, 32 and 33 herein before :- (i) Two runs of cables and one run of continuous earting cable drawn in casing and caping will be measured as one length of sub main. (ii) PVC casing caping and its accessories is deem to be included in this item rates. (iii) Unit rate include for cutting chases for sinking for boxes and making good to wall, floors etc.

Supply and fixing in replacement Distribution Board, TPN Vertical (MCCB Incomer) IP43 protection Double Door, 4 way, mechanical impact strength IK 09, suitable for MCCb upto 125 Amps as Incomer (frame 1) complete with 200 Amps rated busbar all as specified and directed.

Supply and fixing in replacement Distribution Board, TPN Vertical (MCCB Incomer) IP43 protection Double Door, 8 way, mechanical impact strength IK 09, suitable for MCCb upto 125 Amps as Incomer (frame 1) complete with 200 Amps rated busbar all as specified and directed.

Supply and fixing in replacement distribution board sheet metal enlosure double door shutter type factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB's 415 volts, 200 Amp rated bus bar with front openable cover suitable for TP & N 4 ways all as specified & directed.

Supply and fixing in replacement distribution board sheet metal enlosure factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB's 240volts, 200 Amp rated bus bar with front openable cover suitable for SP & N 2 ways all as specified & directed.

Supply and fixing in replacement distribution board sheet metal enlosure double door shutter type factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB's 240volts, 200 Amp rated bus bar with front openable cover suitable for SP & N 4 ways all as specified & directed.

Supply and fixing in replacement distribution board sheet metal enlosure double door shutter type factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB's 240volts, 200 Amp rated bus bar with front openable cover suitable for SP & N 8 ways all as specified & directed.

Supply and fixing in replacement distribution board sheet metal enlosure double door shutter type factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB's 240volts, 200 Amp rated bus bar with front openable cover suitable for SP & N 12 ways all as specified & directed.

Supply and fixing in replacement 4 Pole MCCB 125 Amp, 50 Hz, 415 V, with adjustable thermal & adjustable magnetic setting, breaking capacity 25 KA.

Supply and fixing in replacement MCCB 63 Amp TP, 415 volts 16KA.

Supply and fixing in replacement MCB FP 63 Amp, 415 Volts, 50 Hz with 10 KA.

Supply and fixing in replacement of MCB DP/SPN 6-32 Amps, 230 Volts, 50 Hz with 10 KA.

Supply and fixing in replacement of MCB SP 6-32 Amps, 230 Volts, 50 Hz with 10 KA.

M&L for in replacement of Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6.3 mm thickness burried directly in ground (earth pit not less than 2.25mtr deep below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level connected to and incl galvanised earth lead wire of 4.00mm dia by means of nuts & bolts, check nuts and washers of galvanised incl PCC pit of 1:2:4 type B-1, cover reinforced with XPM weight not less than 4 Kg/Sqm and 6mm dia bar handle, earth pit angle iron frame of size 25mm x 25mm, excavation and earth work in any type of soil, charcoal dust, salt, light grade GI watering pipe 20mm dia with funnel and wire -mesh and medium grade GI protection pipe of 15mm bore from top edge of earth plate upto main distribution board complete all to as shown in electrical plate No 3 of MES Sch 2009 (Part I) connected main switch board all as specified and testing on completion.

Supply and fixing in replacement of 30 Watt LED streetlight fitting luminaire, energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having Bottom Opening seperate driver compartment with IP66 protection and impact resistance of IK08, including 1.2 RM GI pipe bracket of 40mm dia, connecting up with 2/3 core flexible coppper conductor cable.

Supply and fixing in replacement of LED luminaire 600 x 600mm, 36 watt, 220 volts AC recessed/ surface type fittings, IP 20 with epoxy powder coated CRCA sheet housing with electronic driver, connector block, etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size.

Supply and fixing in replacement of LED round shape 15 watt 220 volts AC recessed/surface type with high efficacy PMMA diffuser soft glare free light complete with drivers, clamps and suitable size as per ground requirement complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size.

Supply and fixing in replacement of invertor LED bulkhead 10 watt 220 volts AC with high efficacy PMMA diffuser soft glare free light complete with drivers, clamps complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size.

Supply and fixing in replacement of LED table lamp 6 watt 220 volts AC with high efficacy PMMA diffuser soft glare free light complete with drivers, complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size.

Supply and fixing in replacement of sheet metal enclosures with plug socket triple pole and earth enclosure with three pin and earth plug with socket, 415 volts complete with one MCB of 63 Amps (TP) complete all as specified.

NOTE : - AMOUNT OF SCHEDULE OF CREDIT RS. 144390.00 WILL BE DEDUCTED FROM TOTAL AMOUNT OF BOQ.

RAVI ELECTRICALS (BID ID -3385685)

Shree Sai Samarth Enterprises (BID ID -3391371)

MAHIMA CONSTRUCTION (BID ID -3388516)

Srujan Associates (BID ID -3390496)

Abhiraj Enterprises (BID ID -3391491)

shubham Enterprises (BID ID -3390881)

M/S K. K. Construction (BID ID -3391296)

Santhi Enterprises (BID ID -3391071)

SHRI SULAI ELECTRICALS (BID ID -3390486)

Bidder Name

SHRI SULAI ELECTRICALS

Santhi Enterprises

MAHIMA CONSTRUCTION

M/S K. K. Construction

Srujan Associates

shubham Enterprises

Shree Sai Samarth Enterprises

Abhiraj Enterprises

sapana enterprises

RAVI ELECTRICALS