Renovation works to Government Girls Higher Secondary School building at PALANI in Dindigul District

Amount

1.1) Earth work excavation for foundation in all soils (including refilling) a. 0 to 2 mt.

24) Manufacturing & supply of steel windows (weight basis)

31) Weathering course over roof slab with proportion of brick jelly 20mm to lime (32:12 1/2) by volume

37.1) White washing 3 coats (slaked)

39) Supplying and fixing of MS Grills in position

52) Supplying, laying, fixing and jointing the following dia PVC pipes as per ASTM D-1785 of schedule 40 including the cost of suitable PVC/GI/GM specials a. 32 mm dia

b. 25 mm dia

Electrical arrangements 69) Supplying and fixing of 15 Amps 3 pin Power plug socket

72) Supplying and fixing of Box type Fibre Fan hook

73.1) Supplying and fixing of 3 phase Distribution board with 6 way per phase 32A per way with neutral link

74) Charges for assembling and fixing of ceiling "Fan"

Annexure 2.1.1) Supplying and filling the basement with gravel

2.1.3) Supplying and filling in foundation and basement with Crushed stone sand

2.1.6) Supplying of Stone dust including conveyance sharges

3.1.1) C.C.1:5:10 using 40mm size HBSJ for Foundation & Basement using crushed stone sand

4.4.1) Standardized Concrete mix M20 Grade using crushed stone sand with Admixture a. In Foundation and basement

6.6.1) Brick work in C.M. 1:5 (F& B) using Kiln Burnt Country bricks of size 22 x 11 x 7 cm (8 ¾ " x 4 ¼ " x 2 ¾ ") using crushed stone sand with Admixture

8.4.1) Standardized Concrete mix M20 Grade using crushed stone sand with Admixture a. In Ground Floor

9.6.1) Brick work in C.M. 1:6 using Kiln Burnt Country bricks of size 22x11x7cm (8 ¾ " x 4 ¼ " x 2 ¾ ") using crushed stone sand with Admixture a. In Ground Floor

b. In First Floor

18.1) Formwork using M.S.Sheet a. For Column footings, plinth beam, Grade beam, Raftbeam, Raft slab etc.,

b. Plain surfaces such as Roof slab, floor slab, Beams, lintels, lofts, sill slab, staircase, portico slab and other similar works

26.1) Flooring in C.C.1:5:10 using 40mm size HBSJ using crushed stone sand

29.8.1) Supplying and fixing of Glazed tiles using Grout (Tile Joint Filler) using crushed stone sand

29.9.1) Supplying and laying of Floor ceramic tiles (Anti-skid) using Grout (Tile Joint Filler). using crushed stone sand

32.1.1) Pressed tiles (23cmx23cmx20mm thick) mixed with water proofing compound @ 2% by weight of cement using crushed stone sand

33.1) Plastering in C.M. 1:5, 12 mm tk. using crushed stone sand with Admixture

35.2) Spl. Ceiling plastering in C.M 1:3, 10 mm tk. using crushed stone sand with Admixture

36.1) Plastering for Border in C.M. 1:5, 12 mm tk. using crushed stone sand with Admixture a. 150 mm wide Border

b. 75 mm wide Border

c. 50 mm wide Border

38.4.2) Supplying and applying Wall putty (one coat) over the new cement plastered walls

40.1) Two coats of painting over the old wood work including Removing paint from doors, windows & wood works by manual labour

41.1) Two coats of painting over the old iron work and other similar works including Removing old paint from iron surface with sand paper

43.1) Supplying, Fabricating and fixing of Mild steel / RTS grills (without cement slurry wash) reinforcement for all sizes of rods

47.1) Supplying and fixing of SS Towel Rail (75 CM length)

50.2.1) Providing precast Kerb stone in C.C. 1:3:6, 450x300x150 mm using crushed stone sand

53.5) Supplying and fixing of Wash hand basin (White without Pedastal type) of size 550 mm x 400 mm (22"x16")

54.1.1) Supplying and fixing of 15mm dia Half turn Brass core C.P. Tap (long body)

54.2.1) Supplying and fixing of 15mm dia Half turn Brass core C.P. Tap (Short body)

57.2) Supplying and fixing of EWC (White) 500mm with PVC SWR grade "P" or "S" Trap

64.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. b. Light point without ceiling rose with bakelite battern holder

65.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Fan Point

67.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point at Switch Board Itself.

68.2) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point at Convenient Places.

75.1.2) Supplying and delivery of fan with electronic dimmer with ISI mark a) 48" (1200mm) sweep

77.5) Run off 2 Wires of 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 in fully concealed

77.7) Run off 2 Wires of 2.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 in fully concealed

87.1) Supplying and fixing of Three Phase ELCB/RCCB

88.2) Providing Polished Rajasthan Kotta stone slab of 20mm thick with machine cut edges of size in C.M. 1:3

101) Supplying and fixing of 25 watts LED with street light fittings

102) Supplying and fixing of 4'18 watts crystal LED tube light

112.1) Supplying and fixing of Exhaust Fan 225mm dia

140) Supplying of 3 to 10mm size HBS jelly including conveyance charges

142) Supplying and laying of 83mm thick rubber moulded hydraulic pressed paver block including spreading and levelling of 3mm to 10mm size HBSJ and stone dust to the required thickness

144) Supplying and fixing of CP Shower Arm with Overhead Shower Rose

147) Supplying and fixing of CP Two Way Bib Cock with Health Faucet

155) Supplying and fixing of 100 Amps (Triple pole) TPN double break switch with HRC fuse and neutral

361.1) Supplying and laying of Concrete designer tiles flooring in C.M. 1:3 (one of cement and three of crushed stone sand) 20mm thick

378.2) Supplying and fixing of Vitrified tiles (Ivory) in CM 1:3, 20mm tk using crushed stone sand

796) Two coat of Exterior emulsion paint including special primer for outer wall surfaces

796.1) Two coat of Exterior emulsion paint for old wall surfaces without primer including thorough scrapping

796.2) Two coat of Plastic emulsion paint for inside old wall surfaces without primer including thorough scrapping

800.2) Dismantling, clearing away and carefully stacking materials useful for re-use of Pressed Tiles & Weathering Course

800.5) Dismantling clearing away and carefully stacking materials useful for reuse of Floor finish & dadooing walls in cement mortar with Mosaic Tiles / Glazed Tiles / Clay Tiles / Cuddapah Slabs

800.13) Removing AC Sheet Roofing without roof timbers

Balraj Contractor

J V CONSTRUCTIONS