Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.8 LAccepted-AOC 728 1 JOGIWARA VISHAVKARMA MANDIR ROAD AMBALA CITY | AMBALA CITY | AMBALA | HARYANA | 134003 | L1 | Accepted-AOC L1 | |
| 2 | L2₹20.0 L+₹8,590.50 (0.43%)Rejected-AOC | L2 | Rejected-AOC L2 | |
| 3 | L3₹25.8 L+₹6.0 L (30.0%)Rejected-AOC | L3 | Rejected-AOC L3 |
Tender Value
₹24.3 L
EMD Value
₹48,500
Closing Date
15 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Hakimpet
Secunderabad
REPAIR MAINT OF B/R WORKS SERVICES FOR MES INSTALLATIONS AT AFS HAKIMPET UNDER GE (AF) HAKIMPET
2023_MES_596517_1
8519/E8
Open Tender
Civil Works
Item Rate
270 days
Hakimpet
As per NIT
7 documents required · 7 mandatory
₹500
GE (AF) Hakimpet
₹48,500
Yes
26 Jun 2023
18 May 2023
17 Jun 2023
18 May 2023
15 Jun 2023
1 Jun 2023
Amount
Demolition of unreinforced cement Concrete of any description and in any position not otherwise specifically provided for and removed debris outside MD land complete all as specified and as directed by Engr-In-Charge
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises.
M &L 25 mm thick PCC (1:2:4 ) type B0 using 12.50 mm graded stone aggregate as in floor finished even and smooth complete all as specified and directed.
M & L 15 mm thick screed bed or bedding layer in CM 1 : 6 for laying of floor tile all as specified and directed.
Material and labour non skid colour ceramic tiles of 7 to 8 mm thick (square/rectangular) area of each the exceeding 0.11 sqm but not exceeding 0.18 sqm of approved 1st quality in floors etc set and jointed in neat cement slurry and pointed with white / coloured cement to match coloured tiles all as specified and directed.
M & L 10mm thick rendering in CM 1 : 4 for laying of skirting/dado all as specified and directed.
M & L for Glazed Ceramic tiles coloured, of size 350 mm x 250 mmX7 mm /450mm X 350 mm X 7mm thick approved 1st quality as in vertical surfaces such as skirting/ dados and risers to steps etc, set and jointed in neat cement slurry and pointed with white/ coloured cement to match the colour of tiles all as specified and directed.
Dismantling of stone slabs of any description or thickness in floors and approns etc, laid ,bedded and pointed in any mortar all as specified and directed.
M&L for kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing all as specified and as directed
M&L for repairs to RCC ceiling or slab not more than 100mm depth supported on walls with hammer test the area and remove all loose particles of mortar,concrete rust etc from the spilled surface and clean it with wire brush and expose fully any corroded steel in the repair area and remove all scale and corrosion deposit and apply rust remover for rust free bars and apply epoxy zinc primer to the remaining exposed cleaned steel bars including provide additional steel if required and tie the new steel to the old steel by binding wires, and apply one coat of bonding agent(latex based) over the entire area of steel and concrete to be treated, and finally apply polymer modified 1:3 cement mortar or micro concrete to the treated surface and provide cover or form work with support if required including necessary formwork and safety measures complete as specified and directed by the Engr In charge Note:The chemicals which are incorporating in the work should be Dr Fixit or equivalent
M&L for applying two coats of distemper oil emulsion over a coat of primer and preparation on wall surface including complete removal of existing treatment from walls including scrapping and removing the entire scales of existing treatment complete all as directed.
M&L preparing old decorated surfaces, including cornices and applying two coat of white wash on ceiling including removing of nails,making,making good of holes,cracks,washing floors, cleaning glass,joinery,electric fitting,wiring etc of drops and splashes and leaving premise,clean and tidy including complete removal of existing treatment to ceiling including scrapping and removing the entire scales of existing treatment complete all as specified & directed by the Engr-in-Charge.
M&Lfor complete removal of existing treatment on walls and finishing walls with two coats of premium acrylic smooth exterior paint with silicone additives of required shade @ 1.43 Ltr/10Sqm over and including priming coat of exterior primer applied @ 2.20 kg/10Sqm) using of all scaffolding,trestles,ladders,cradles which are necessary for execution of work and protective measures including removing of nails,making good holes,cracks,washing floors, cleaning glass,joinery,electric fitting,wiring etc of drops and splashes and leaving premise,clean and tidy all as specified & directed by the Engr-in-Charge. Note: Work for 18 m height OHT.
Taking down chowkats or frames not exc. 1.5 Sq mtr each with shutters without taking off shutters from the frames complete all as specified and as directed by the Engineer-in-Charge
All as per ser Item above but exc 1.5 Sqm and not exc 4 sqm each complete all as specified and as directed by the Engineer-in-Charge
Taking down shutters exc 1.0 Sqm and not exc 2 sqm each complete all as specified and as directed by the Engineer-in-Charge
Taking down Shutters exc 1 sq. m and n exc 2 sq. m each and refixing in the same opening after carrying out easing and repair works complete all as specified and as directed by the Engineer-in-Charge
Supply and fix factory made 35 mm thick second class hard wood plain framed paneled shutters (two panels) with lock rail and panels of 9 mm BWP commercial ply or 12 mm veneered particle board for others with commericial veneering on both faces and size of members of door shutters as per IS :1003(part I ) as specified in SSR part I section 3 clause 8.20 (a) fitted to chowkats, kiln seasoned and chemically pressure treated complete all as specified and as directed by the Engineer-in-Charge
S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average with of aperture 1.4 0 mm and fixed with stainless steel wire staples complete all as specified and as directed by the Engineer-in-Charge.
Supply and fix 100 mm size medium weight cold rolled mild steel butt hinges complete all as specified and as directed by the Engineer-in-Charge
Supply and fix 75 mm size medium weight cold rolled mild steel butt hinges complete all as specified and as directed by the Engineer-in-Charge
Supply and fix 200 mm size Alluminium, anodised barrel tower bolts of extruted section and fixed complete all as specified and as directed by the Engineer-in-Charge
Supply and fix 150 mm size extruded aluminium door handles fabricated type complete all as specified and as directed by the Engineer-in-Charge
Supply and fix alluminium alloy, anodized sliding door bolts 250 mm long with hasp and staple (bolt type) with fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy, ISI marked and fixed complete all as specified and as directed by the Engineer-in-Charge
Supply and fix mild steel helical door spring rat tail rod model including roller plate complete 300 mm long complete all as specified and as directed by the Engineer-in-Charge
S&F 140 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor complete all as specified and as directed by the Engineer-in-Charge
Material and labour for Second class hard wood plain solid straight chowkats and frames wrought, framed, rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed by the Engineer-in-Charge.
Supply and fix solid PVC door frame of size 50 mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification complete all as specified and as directed by the Engineer-in-Charge
S&F Factory made PVC moulded door shutter with particle board core,28 to 30mm thick(stIles) with 2,4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face and 2mm prelam colour PVC sheet on back face supplying and fixing in frame at site as per specification and specified by Engr-In-charge
Supply and fix in repair vitreous china ware wash hand basin 550mm x 400 mm size flat back or angle including new bracket and making good all connections in repairs complete all as directed by the Engr-in-Charge.
S&F 32mm Dia PVC waste pipe for sinks or wash basines etc,. in repairs complete all as directed by the Engr-in-Charge.
Supply and fix 32 mm dia bore waste fittings brass chromium plated fixed to wash hand basin/urinals with long screwed shanks and fly nuts flange and bedded in run lead cement and other end fixed in repairs complete all as directed by the Engr-in-Charge.
S&F Bib taps, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule 15mm dia and fixed
S&F in repair 15 mm bore pillar cocks tall fancy type,cast copper alloy,with capstan heads,chromium plated,screwed down, fancy type high pressure, with or without lettred 'HOT or COLD' with long screwed sunk and fly nuts complete all as specified.
S&F angle valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repair.(15mm bore).
Supply and fix 15 mm bore LDPE pipe 45cm long with brass nuts and washers on both ends all as in repairs specified and directed.
Supply and fixing in repair vitreous china squatting pan'orissa pattern,size 580x440mm white,with integral foot rests (excluding flushing cistern and flush pipe)
Supply and fix 10 Litre capacity PVC low level flushing cistern with ball valve and handle/push button 32mm dia PVC flush pipe including taking down unserviceable cistern complete as in repairs all as specified and directed.
S&F Towel Rail 600mm long 20mm dia,D type cromium plated, fixed with and including Chromium plated brass screws and wooden/plastic cleats. and fixed in repairs all as specified and directed.
S&F in repair sheet glass corner shelf assembly consisting of 5.5 mm thick sheet galss shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long
S&F Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) and fixed in repairs all as specified and directed.
S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms) and fixed in repairs all as specified and directed.
S &F 75 mm dia PVC (SWR) floor trap plain with grating including jointing to waste pipe fixed in solvent cement or cement concrete 1:2:4 type B1 all as specified and directed.
Demolition/Dismantling of drain pipes any type at any position complete all as specified and directed.
S &F 75mm bore PVC(SWR) Pipes single socketed in any length with rubber ring joints laid in trenches or in floor all as specified and directed.
S &F 110mm bore PVC(SWR) Pipes sinle socketed in any length with rubber ring joints laid in trenches or in floor all as specified and directed.
S &F 75mm bore PVC(SWR) bend all as specified and directed.
S &F110mm bore PVC(SWR) bend all as specified and directed.
Taking up or down steel tubing and connections 15mm bore of pipe, including cleaning for refixing or removal to store complete all as specified and as directed by the Engineer-in-Charge.
Taking up or down steel tubing and connections 20mm bore of pipe, including cleaning for refixing or removal to store complete all as specified and as directed by the Engineer-in-Charge.
Supply and fix steel water tubing 15 mm bore medium grade galvanized with all fittings such as bends, tees, nipples, elbows, reducers, etc, fixed complete to walls and ceilings or laid in floors all as specified and directed.
All as per item above but 20mm dia
S & F 500 Ltrs capacity Rotational moulded, polythene water storage tanks (cylindrical shape with vertical top closed) hoisted and fixed in position including dismantling existing old water tank all as specified and directed.
S&F in repairs 20 mm bore dia ball valves, high pressure of PTMT with epoxy coated aluminium rod & high dencity plasstic ball screwed for iron pipe and fixed .(minimum weight 15 mm-142gms/20mm-210gms) all as specified and directed.
S&F in repairs Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for 20 mm bore pipe all as specified and directed.
Removing exisiting treatment and roughening surfaces of old concrete roof / floor surfaces by picking, sweeping clean and washing down with water to remove dust,etc
Material and labour rendering 15mm thick on fair faces of brick work / concrete surfaces in CM 1:3 finished even and smooth without using extra cement and mixing with WPC as per manufacturers instruction including brushing neat cement slurry with 3.0 kg of cement per square metre on old concrete surfaces. Note:- WPC will be measured and paid separately.
Supply only integral water proofing compound
M&L Applying evenly a priming coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces and APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application including applying two coats of aluminium paint @ 0.1 ltr/Sqm per each coat complete all as specified and directed
M&L providing PCC 1:2:4 type B-0 (using 12.5mm graded aggregate) as in copings complete all as specified and directed.
M&L for preparation of old steel surface and applying two coats of synthetic enamil paint over a coat of red oxide zinc chrome on new surfaces of any description complete all as specified.
Taking down cement plaster on brick or stone etc including racking out joints, hacking for key, scrubbing down with water etc and removed rubbish outside MD land complete.
M&L Rendering 15 mm thick on fair faces of brick work or concrete wall surfaces in CM 1:6 is to be finished even and smooth (with out using extra cement) complete all as directed
M&L Rendering 15 mm thick mixed with water proofing compound as per manufactures instruction on fair faces of brick work or concrete wall surfaces in CM 1:4 is to be finished even and smooth (with out using extra cement) Note :- Integral water proofing compound to be measured under separate item as supply only.
M&L Rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:3 is to be finished even and smooth (with out using extra cement) for ceilings complete all as directed
M&L for applying two coats of distemper oil emulsion over a coat of primer on newly plastered surface of wall all as directed.
M&L preparing new plastered surfaces, including cornices and applying two coat of white wash on ceiling including removing of nails,making,making good of holes,cracks,washing floors, cleaning glass,joinery,electric fitting,wiring etc of drops and splashes and leaving premise,clean and tidy all as specified & directed by the Engr-in-Charge.
M&L for preparing of new plastered surfaces and applying one coat of cement based paint on walls over a coat of chalk whitening with using of all scaffolding,trestles,ladders,cradles which are necessary for execution of work and protective measures including removing of nails,making good holes,cracks,washing floors, cleaning glass,joinery,electric fitting,wiring etc of drops and splashes and leaving premise,clean and tidy all as specified & directed by the Engr-in-Charge.
M&L for preparing of old painted surfaces and applying one coat of cement based paint on walls with using of all scaffolding,trestles,ladders,cradles which are necessary for execution of work and protective measures including removing of nails,making good holes,cracks,washing floors, cleaning glass,joinery,electric fitting,wiring etc of drops and splashes and leaving premise,clean and tidy all as specified & directed by the Engr-in-Charge.
M&L for Demolition of Brickwork or stone/ boulder masonry, built in cement mortar, manholes including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as directed.
Material and labour brick work with fly ash bricks straight or curved on plan exceeding 6 M mean radius built in CM 1:4 etc complete.
M&L preparation of new wood or wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of primer all as specified & directed by the Engr-in-Charge. .
M&L preparation of previously treated wood or wood based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint. all as specified & directed by the Engr-in-Charge. .
Hacking out old broken glass from wooden frame/metal frame or stone concrete or brick with putty or fixed with nail complete all as directed by the Engineer-in-Charge.
Supply and fix sheet glass, ordinary quality, 4 mm thick, in squares not exc 0.50 Sqm in each pane and glazing with oil putty/suitable beading complete all as specified and as directed by the Engineer-in-Charge.
M&L for chequered cement concrete tiles 300x300x25mm thick with grey cement and pigment laid over and including 15mm thick cement screed bed 1:6 complete all as specified and directed.
GUTHIKONDA BROTHERS
K LAKSHMAN SINGH AND CO
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .