SPECIAL REPAIR TO BLDG NO P 01 (01 TO 08) JCOS MD ACCN AT NEEL BHAWAN ENCLAVE OF AG AND OTHER SANCTIONED WORKS UNDER GE (WEST) FEROZEPUR CANTT

Amount

Dismantling brick tiles or terracing tiles laid in single layer on roofs jointed and pointed in cement mortar complete all as specified.

Demoletion of mud phuska in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed.

Material & labour for 10mm thick screed plaster in cement mortar 1:4 finished even and smooth without using extra cement on top of roof complete all as specified and directed.

Material & labour for applying tack coat of industrial bitumen 85/25 at the rate of 1.20 kg per sqm including cleaning surfaces complete all as specified and directed.

Supply and Fixing 150 micron polythene film including preparation of roof surfaces complete all as specified.

Material & labour for 80 mm thick average consolidated thickness,mud phuska on flat roofs including 25 mm thick mud plaster complete all as specified and directed.

Material & labour for 40 mm thick brick tiles laid on mud mortar and joints grouted flush in cement mortar (1:3) mixed with 5 % of crude oil by weight of cement on mud phuska and pointed flush as work proceeds complete all as specified and directed.

Material & labour except tiles for 40 mm thick brick tiles laid on mud mortar and joints grouted flush in cement mortar (1:3) mixed with 5 % of crude oil by weight of cement on mud phuska and pointed flush as work proceeds complete all as specified and directed. Note :- Old brick tiles retreived by dismantling of treatment vide item No 8 above to be reused.

Taking down chowkhats n exc 1.50 sqm each without taking off shutter each upto 04 storeys complete all as specified and directed.

Supply and Fixing mild steel, box type windows with side hung shutters (glazed shutters) including projecting type hinges with steel handles and steel peg stay, complete with sash bars, dovetailed or welded to receive wire gauge or glass with one shop coat of zinc chromate primer complete all as specified and directed.

Supply and Fixing mild steel, box type windows with side hung shutters (wire gauge shutters) including projecting type hinges with steel handles and steel peg stay, complete with sash bars, dovetailed or welded to receive wire gauge or glass with one shop coat of zinc chromate primer complete all as specified and directed.

Supply and Fixing mild steel,box type ventilator with side hung shuttes including projecting type hinges with steel handles and steel peg stay, complete without sash bars, dovtailed or welded complete all as specified and directed.

Supply and Fixing Factory made box type steel ventilator side/top hung with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEJZ/TD-1019/08 & 1020/08

Hacking out old broken glass (any thicknesss, size,quality or description) n exc . 1.50 Sqm from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

Material & labour for 3.00 mm thick sheet glass, ordinary quality and glazing with oil putty in squares n. exc. 0.50 sqm in each pane complete all as specified and directed.

Supply and Fixing stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

Supply and Fixing framed work such as grills,gratings etc, with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors framed balausters, walk ways,railings, framework of water tanks and similar works conforming to Fe 290, Gde-E-165 complete all as specified and directed.

Material & labour for two coat of synthetic enamel paint (ordinary tint) to the new steel surfaces having shop coat primer red oxide (zinc chrome) over 10 cm in width or girth not otherwise described complete all as specified and directed.

Material & labour for preparation of new steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide,zinc chrome primer complete all as specified and directed.

Supply and Fixing in repairs 0.50 mm thick plain aluminium sheeting, alloy 31000 H4 in crumple section covering and all other similar works complete all as specified and directed.

Demolition of brick work built in cement mortar of any specification and in any position complete all as specified.

Material & labour Brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 including demolition built in cement morter complete all as specified and directed.

Brickwork with sub-class `B' brick straight or curved on plan to any radius in half brick thick walls built in CM (1:3)

Taking down cement or cement lime plaster on brick or stone walls etc including racking out joints, hacking for key scrubbing down with water etc any descriptionall as specified.

Material and labour rendering 15 mm thick cement plaster in CM 1:4 on other than fair faces of brick/concrete work surfaces mixed with integral water proofing compound finished even and smooth (without using extra cement ) all as per manufacturer's instruction and as specified. Make: 'Plastocrete Plus' of Sika/ 'Pidiproof LW' of Pidilite for water proofing compound. Note: (i) WPC shall be measured and paid for separately as 'Supply only'. (ii) WPC to be mixed @200ml per 50 Kg bag of cement all as manufacturers instruction.

Material & labour rendering/plastering, 15mm thick in cement mortar (1:4) on any face of brick walls or concrete surfaces, surfaces finished even and smooth without using extra cement complete all as specified.

Material and labour rendering 15mm thick cement plaster in CM 1:6 on fair faces of brick or concrete surfasces finished even and smooth (without using extra cement ) all as specified and directed.

Material and labour rendering 5 mm thick cement plaster in CM 1:3 in ceiling on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement ) complete all as specified and directed.

Supply only liquid water proofing compound.

Material & labour for preparing new surfaces of walls by scrapping/rubbing and applying two coat of cement based paint complete all as specifeid

Material & labour for preparing old surfaces of walls by scrapping/rubbing and applying two coat of cement based paint complete all as specifeid

Material & labour for complete removal of existing treatment and applying two coats of oil bound distemper over a coat of water based primer over 2mm thick (average) wall care putty applied in two coats including rubbing with siutable sand paper complete all as specified.

Material & labour for preparation of new surfaces and applying two coats of oil bound distemper over a coat of water based primer over 2mm thick (average) wall care putty applied in two coats including rubbing with siutable sand paper complete all as specified.

Taking down chowkhats exc 1.50 sqm and n.exc 4.00 sqm without taking off shutter each upto 04 storeys complete all as specified and directed.

Taking down chowkhats n exc 1.50 sqm each without taking off shutter each upto 04 storeys complete all as specified and directed.

Taking down shutters of any description exc 1.00 sqm but n exc. 2.00 sqm each complete all as specified and directed.

Supply and fixing factory made 35 mm thick 2nd hard wood rail and style plain 5 Plain, framed, panelled shutters(any number ofpanels), with panels of timber flat on both sides(feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted tochowkats ,complete all as specified and directed.

Supply and fixing factory made chowkhats of factory made 2nd class hard wood 30mm thick Glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc(without sash bars) edges of framing plain, chamfered or rounded, fittted with cut and mitred beads for securing gauge,etc sizes of member of shutter as specified SSR part-I Section 8 clause 8.24 (a) complete all as specified and directed.

Supply and Fixing factory made 105 x 60 mm size Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

Material & labour PCC 1:3:6 type C1(20 mm graded aggregate) as in bed blocks for hold fast , filling of pressed steel chowkhat and all other similar works including necesssary formwork where ever required complete all as specified and directed.

Supply and Fixing 100 mm butt hinges medium weight cold rolled mild steel.

Supply and Fixing 100 mm butt hinges extruded aluminium alloy with galvanized mild steel hinges pin anodised type `C'-22 complete all as specified and directed.

Supply and Fixing aluminium anodised 200 mm barrel tower bolts of extruded section complete all as specified and directed.

Supply and Fixing aluminium handle 150 mm cast type anodised fixed with steel screws.

Supply and Fixing factory made solid PVC door frame of size 50mm x 47mm made out of 5mm single piece extruded PVC profiles reinforced with 19 x 19mm MS square tube provided with EPDM rubber gasket weather seal through out the frame and the profile mitre cut at two corners and joined by inserting 2 nos 150mm long brackets of 15 x 15mm MS square tube inside 19 x 19mm MS square tube suitably screwed complete all as specified.

Supply & fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes of size 15 x 15mm for top and bottom rails and 19 x 19mm for stiles, MS frame covered with 5mm thick single piece extruded PVC profile 'C' channel having a 5mm thick PVC sheet strip of 20mm width struck inside with solvent cement, forming stiles, and 5mm thick single piece extruded PVC profile for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail; panelling of 5mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with PVC sheet beading, and joined together with solvent cement adhesive etc all as per manufacturer's instructions and drawings as shown in SSR Part-I 2009 complete all as specified.

Supply and Fixing PTMT butt hinges, 100 mm long and fixed with steel screws complete all as specified.

Supply and Fixing PTMT tower bolts, 150 mm long and fixed with steel screws complete all as specified.

Supply and Fixing PTMT door handle, 150 mm long and fixed with steel screws complete all as specified Make Prayag/Polytuf or equivalent make as approved by GE.

Material & labour for Preparing new wooden surfaces of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel painting over and incl one coat of pink primer

Material & labour for Preparing old wooden surfaces of any description not otherwise described over 10cm in width or girth and applying one coats of synthetic enamel paint complete all as specified

M&L for Preparing old steel surfaces of any description not otherwise described over 10cm in width or girth and applying one coats of synthetic enamel paint complete all as specified

Supply and Fixing in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

Supply and Fixingstainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture not more than 1.18 mm and fixed with stainless steel wire staples complete all as specified and directed

Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and rubbish off the primises complete all as directed.

Material & labour coloured ceramic tiles 7 to8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match

Material & labour coloured ceramic tiles 7 to8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in vertical surfaces such as skirtings and dados etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match

Material & labour Glazed ceramic coloured (colour & shade as approved) tiles non skid of size 300x300x7mm thick as in floor set and jointed in neat cement slurry over and including 15mm thick screed in cement mortar (1:6) complete all as specified.

Material & labour for glazed ceramic coloured tiles in vertical surfaces 300 X 200X 7 mm th set and jonnted in cement slurry and pointed in white or colour and jonnted in cement slurry and pointed in white or colour cement to match including 10mm thick back coat in CM 1:4 complete all as specified and directed.

Material & labour Non Skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Material & labour Screed bed or bedding layer of mortar 15 mm thick in (1:6) for laying floor finishes like tiles etc complete all as specified and directed.

Material & labour rendering 10 mm thick on fair faces of brick work in CM (1:4) complete all as specified and directed.

Material & labour glazed tiles digital coloured ceramic tiles 300x450x7mm thick in vertical surfaces such as skirting and dados set and jointed in neat cement slurry pointed in coloured cement to match complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons,dados etc laid, bedded and pointed in any mortar and removal of rubbish off the site complete all as specified & directed.

Material and labour for crushed sand filling under precast interlocking paver blocks and all other similar works complete all as specified and directed.

Material & labour rubber moulded glossy finished precast concrete interlocking paver block of any shape and size confirming to IS 15658 -2006 of 60 mm thickness, M-35 Grade with grey cement and pigment laid over sand cushning including compaction of paver blocks using surface vibrator all as specified and directed. Note :- Sand cushioning shall be paid separately under relevant item

Material & labour for granite (of any colour) 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including grinding and polishing as in kitchen platform, flooring and all other similar works complete all as specified and directed.

Material and labour 20 mm thick granite (of an type and colour) machine cut as in urinal partitions and all other similar works including grinding, polishing,cutting grooves in wall for fixing granite with cement mortar 1:2 and all other arrangments complete all as specified and directed

Supply and Fixing in repair vitreous China wash basin white, flat back,size 550X400 mm with pedestal including cutting for pinning in ends of brackets,complete.

Supply and Fixing Wash hand basin, flat back 550x400mm vitreous china (white) including PTMT waste fittings, 32mm bore size, waste pipe, PVC, 32mm bore, angle iron/cast iron brackets of required size as directed & making good disturbed surfaces to match with the existing as in repair complete all as specified.

Supply & Fixing in repair vitreous China squatting pan, ' Orissa patteren, size 580 x 440 mm white, with integral footrests (excluding flushing cisteren and flush pipe) complete all as specified and directed.

Supply and Fixing Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe & waste pipe)

Material & labour 10 ltr capacity PVC low level flushing cistern syphonic action type with inlet ball valve, float and handle and including bracket and flush pipe complete all as directed. Make:- Parryware (Slimline) / Hindware (Sleek)

Supply and Fixing in repairs 10 litre capacity PVC low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size complete all as specified and directed.

Supply and Fixing in repair vitreous China wash basin white, flat back,size 580X450 mm with pedestal including cutting for pinning in ends of brackets,complete.

Vitreous china squatting pan, Orissa pattern, size 580x440mm white/ coloured with integral foot rests including flus pipe and connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete all as specified.

Material & labour in repair CP soap dish holder 140 mm size complete all as specified and directed Cat Part No Prayag BA-05 or Equivalent of PARKO / GEM

Supply and Fixinging 15 mm bore 125 mm size overhead shower single flow (ABS body chrome plated with grey face plate) with rubit cleaning system including shower arm 240 mm long(light weight) round shape with wall flange complete all as specified & directed. Prayag Cat Part No BS-67 or Equivalent of PARKO / GEM

Supply and Fixing as in repair 15 mm bore fancy type bib taps long body cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule. Make:- ESS ESS CROMA Cat Part No C 202 or Equivalent of JAQUAR/PARKO

S & F in repairs stop valve cast copper alloy chromium platted screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes 15 mm dia

Supply and Fixing as in repair 15 mm bore fancy type bib taps long body cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule. Prayag Cat Part No 6709 or Equivalent of PARKO / GEM

Supply and Fixing Stainless steel plate rack of standard pattern & of size 900 x 750 x 250 mm.The thickness of stainless steel sheet shall be 1.00 mm & grade of sheet shall be 304 AISI including fixing to wall with 4 Nos 50mm screws & PVC rawl plugs complete all as specified and directed.

Supply and Fixing in repair sinks made of stainless steel 1mm thick kitchen or labortory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to ipe, overall size 485mm x 420mm bowl size 410mm x 3330mm x 160mm

Material & labour in repair for fancy type 15 mm bore central hole basin mixture with 'U' shaped round casted spout with 3" long pipe connection with aerator complete all as specified and directed. Prayag Cat Part No 6750 or Equivalent of PARKO / GEM

Supply and Fixing as in repair 15 mm bore fancy type angular valve cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions Prayag Cat Part No 6709 or Equivalent of PARKO / GEM

Supply and Fixing in repair PVC connection 15mm size PTMT nuts of length 450 mm.

Material & labour in repair fancy type CP Towel Rail 60 cm long complete all as specified and directed. Prayag Cat Part No BA-10S or Equivalent of PARKO / GEM

Material & labour in repair CP Towel Ring all as per cat Part. Prayag Cat Part No BA-41 or Equivalent of PARKO / GEM

Taking up or down steel tubing and connection including cleaning for refixing or removed to store,15 mm dia bore complete all as specified and directed

All as per item No -90 above but 20mm bore

Refixing of 15mm bore old steel tubing and connections in new or old position (Walls, ceiling, floors, etc) complete all as specified and directed

All as per item No -92 but 20 mm bore

S/F GI tubing 15mm bore medium grade medium grde with all fittings and fixed complete to wall and ceilingor laid in floors complete all as specified and directed

All as per item No -94 but 20 mm bore

Fixing only old 15 mm steel tubing and including cleaning in positon (walls, ceiling and floor etc complete all as specified and directed

All as per item No -96 but 20 mm bore

Material & labour in repair 75 mm dia PVC(SWR) multi floor trap including jointing with solvent cement complete all as specified and directed.

Supply and Fixing as in repair grating square 150mm size of PTMT(minimum 100 gms) complete all as specified.

Supply and Fixing shelf assembly consisting of 5.5 mm thick sheet galss shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long

Supply and Fixing in repair 20 mm dia decorative type curtain rods chromium plated anodised aluminium alloy and all other connected works complete all as specified and directed.

Supply and Fixing in repair fancy type powder coated aluminium bracket with gloves for curatin rod suitable for 20 mm dia pipe all as directed.

Demoletion and breaking up drain pipes 100 mm dia (Salt glazed ware,AC, PVC or reinforced concrete) set in cement mortar complete all as specified and directed

Demoletion and breaking up drain pipes 75 mm dia (Salt glazed ware,AC, PVC or reinforced concrete) set in cement mortar complete all as specified and directed

Supply and Fixing 75 mm dia PVC(SWR) pipes single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes and fixed to walls complete all as specified and directed.

All as per Item No-105 above but laid in trenches or in floors.

All as per Item No-105 above but 110 mm dia.

All as per Item No-105 above but 110 mm dia and laid in trenches or in floors..

Supply and Fixing 75mm dia PVC (SWR) bends with access doors any radius.

Ditto all as per Item No-109 above but 110 mm dia.

Supply and Fixing 110 mm dia PVC (SWR) bends any radius.

Supply and Fixing 75 mm dia PVC (SWR) junction single, (single T) equal or uequal provided with access door complete all as specified and directed.

Ditto all as per Item No-112 above but 110 mm dia.

Supply and Fixing 75 mm dia PVC (SWR) vent cowl.

Material & labour for applying bond coat of epoxy bonding agent & cement 1:1 ratio for bonding old and new concrete on damaged surfaces applying polymer modified mortar in CM 1:3 including mixing of polymer latex additive upto 60 mm thicknes (Chajja's fins,border etc) Note :- (i) Quantity of polymer to used @ 15 % by weigght of cement. (ii) Use of electrical mixer to get homogeneous dough on bond coat surfaces. (iii) To achieve required thickness repaet this step after 24 hrs to as required. (iv) Keep the surface moist using water fog for 5 to 7 days etc complete all as specified and as directed. (v) Rate shall be inclusive of all necessary scafolding for building hieght up to 24 meter complete all as specified and directed by Engineer-in-Charge. Make : Epoxy bonding agent shall be Krishna. Dr Fixit, MC Bauchenie and M/s Chemistim, Sika or Equivalent as directed by Engineer-in- Charge complete all as specified and directed.

Supply and Fixing 500 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roofs including fittings, complete all as specified.

Supply and Fixing for replacement of old unserviceable PVC rotational water tank by providing new rotational moulded triple layered polyethelene water storage tank (Cylindrical verticle with closed top) hoisted and fixed in position all as directed of capacity 1000 ltr including dismantling & taking out old unserviceable item complete.

Supply and Fixing for Gun metal globe or Gate valve with iron wheel screwed both end for iron pipe and fixed as per requirement of site and as directed by Engineer in charge including dismantling and taking out old unserviceable item complete of 20 mm size.

Supply and Fixing Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe of size 20 mm dia and fixed complete all as specified and directed.

Supply and Fixing in repair ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of size 20 mm dia.

Supply and Fixing20mm bore PTMT ball valve high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified.

Supply and Fixing Gun metal globe or Gate valve with iron wheel head, screwed both end for iron pipe and fixed as per requirement of site and as directed by engineer in charge including dismantling and taking out old unserviceable item complete fo 25 mm size.

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

Material & labour for rolled mild steel in joist channel,angle or tee section, fixed independently, without connecting plates etc. (cut to ordinary lengths i.e. within 20 mm of the length indicated) as in desert cooler stands and all other similar works conforming to Fe -290 (Gde- E-165) complete all as specifed and directed.

Material & labour for preparation of new steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide,zinc chrome primer complete all as specified and directed.

Material and labour for PCC 1:4:8, type D2 (using 40 mm graded stone aggregate) as in foundation filling, mass concrete complete all as specified and directed.

Material and labour for applying evenly a tack coat of industrial bitumen 85/25 grade @ of 1.2 Kg/Sqm including cleaning of surfaces t complete all as directed.

Material and labour for rendering 10 mm thick in CM (1:4) on fair faces of brickwork or concrete surfaces, with using liquid water proofing compound @ 200 ml per 50 kg bag of cement or as per manufracture's instructions, finished even and smooth without using extra cement complete all as specified and as directed. Note: WPC shall be measured and paid for seperately under relevant item.

Material & labour for 25mm thick cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) as in plinth protection, repair of PCC hardstandings /floors and all other similar works complete all as specified and directed.

Demolition of cement concrete in ground floor n.exc 15cm thickness (below or above ground level) and removing the demolished material and debris out side MD land.

Material & labour 50 mm PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in plinth protection finished even and smooth without using extra cement including necessary complete all as specified and directed.

Material & labour 50 mm PCC 1:3:6 type C2 using 20 mm graded stone aggregate as in plinth protection finished even and smooth without using extra cement including necessary complete all as specified and directed.

Material & labour forming construction joint 30mm deep X 10mm wide with sealing compound grade A .

Material & labour for providing reinforced cement concrete (nominal mix) type B1 1:2:4 (20 mm graded) aggregate) for slabs supported on walls, beams and collumns in floors, roofs, landings, balconies, canopies , deck slabs and in the shelves and the like and all other similar works complete all as specified and directed.

Material & labour for TMT bars10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with theincluding mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and direceted.

Use and waste of formwork to to rough finished flat surfaces to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) complete all as specified and directed.

Material & labour 38 mm width glass dividing strips 3 mm thick and inserted in position to conform design

Material & labour in repair for 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber/steel frame complete all as specified and directed.

Material & labour preparation of new plastered surfaces of wall and applying three coat of white wash.

Material & labour for preparation of old ceiling surfaces and applying two coats of white wash complete all as specified and directed.

Demolition of ceiling boards of any description, and any thickness including cover fillets and frame work complete all as specified and directed.

Supply and Fixing in repair 5 mm thick coloured of any selecetd design hollow PVC wall cladding strips interlocked to each other fitted to wall including PVC 'U' shapes at top/ bottom and PVC angles at windows/door openings all as per manufacturer’s fixing instructions complete all as specified and directed.

Material & labour anodised snap grid frame worke (mail &femail fixing type) false ceiling all as specified.

Material and labour 12 mm thick exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fiber for fixing in 600 mm x 600 mm grid (frame work for ceiling shall be measured and paid separately).

Material & labour for excavation in trenches n. exc 1.5m wide and n. exc 1.5m in depth for fdn n. exc 10 sqm on plain and n. exc 1.5m in depth and getting out soft/loose solil complete

Material & labour Hardcore of broken bricks of gauge n. exc 63mm, deposited spread and leveled in layers n exc 15 cm thick watered and rammed to a true surface complete all as specified..

Material & labour Cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in plinth protection, 50mm thick, surfaces finished even and fair without using extra cement as in plinth protection including provision of construction joints complete all as directed by Engr-in-Charge and as specified.

Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm complete all as specified.

Removal of surplus soil to a distance not exc 50 metre and depositing where directed at a level not exc 1.5 metre above the starting point complete all as specified.

Supply and Fixing 100mm dia cast iron soil, waste and vent pipe, sand cast, in any length with or without ears with connections are fitted/sealed with M-seal including joints fixed to wall complete all as specified.

All as per above item no 150 but size 75mm.

Supply and Fixing 15mm bore pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe, complete all as specified.

Supply and Fixing bib taps, fancy type CP, screwed for 15mm bore of iron pipe or for brass ferrule and fixed all as specified.

Supply and Fixing Stop/Angle Valve 15mm bore fancy type CP, Screwed down high pressure, with high pressure crutch or butterfly handle, screwed both ends for iron pipeor union complete all as specified

Supply and Fixing PTMT shower rose with swivel joints, any colour including shower arm 15mm dia, 195mm long with bend of 45 degree with flange of PTMT complete all as specified.

Supply and Fixing 600mm long towel rail of PTMT fixed to wall with steel screws and PVC rawl plug complete all as specified.

Form work to sides of floor or roof beams lintels cantilevers, shelves including support overhangs plinth bands etc all as specified

Form work to edges of concrete slabs n exc 20 cm thick

Mild steel 8mm dia TMT bars as in reinforcement cut to length bent to shape required including cranking, hooking at ends and binding with mild steel wire (annealed) not less than 0.9mm dia as in stirrups complete all as specified.

40mm thick Damp proof course to horizontal or vertical surfaces including necessary formwork in PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate

Material & labour RCC M-25 design mix using 20 mm graded aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified.

Material & labour RCC M-25 design mix using 20 mm graded aggregate in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified.

Roof treatment water proofing treatment over RCC slab i.e Bituminous primer ,Bituminous coat polythene film, Mud phushka and brick tile etc laid to slope as specified.

Surface Excavation not exceeding 30 Cm deep and averaging 15 Cm deep and getting out in Soft/ Loose soil

Material & labour for 50 mm thik Cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in sub floors, sub bases,floors and paving etc. complete all as specified.

M & L 150 mm dia reinforced concrete pipes,class NP2 laid and jointed complete with collars in trenches as specified

Material & labour PCC 1:3:6 type C-2 as in concrete bed to drain pipes including packing under and haunching against the sides of pipes afrter they are laid and tested in 150 mm bore pipe.

Material & labour for providing precast cement concrete type B-1,1:2:4 in manhole cover including necessaryh form work excluding reinforcement and set in CM 1:4 complete

Material & labour for cement concrete type B-2, 1:2:4 in coping of main hole

Cutting into existing manhole for connecting new drain pipe (150mm dia),making good to pipe and rendering, cutting out existing benching for and forming brench chennel in cement concrete 1:2:4 type B-1 smooth finished etc.

Taking down carefully copper /aluminium point wiring (light, fan , socket or power ) complete, fittings such as switches, ceiling roses, pendants, regulators sockets light fitting etc removing materials to store for keetping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls , floors ,etc.

Taking down carefully unserviceable main switches and distribution boards with fuses/ MCB's (single phase or three phase) of any capacity all as specified and directed.

Taking down carefully old unserviceable sub main wiring including meters and making good disturbed surfaces and matching with existing complete all as directed and specified

M &L Point wiring complete with 1100 volts grade PVC insulated unsheathed FRLS cable of copper conductor, multi stranded of size 1.5 sqmm, single core, in and including existing rigid non-metallic PVC conealed conduit, with all accessories if require such as bends,reducers, spacers, saddles, junction boxes bakelite sheets, wooden rectangular boards / round blocks(for housing lamp holders and light fittings etc) and existing MS pressed steel / cast iron sunken boxes of suitable size for mounting switches / bell pushes / sockets, fan regulator etc covered with new 3 mm thick laminated bakelite sheet top cover including continuous earth wire of size 1.5 sqmm unsheated stranded copper conductor with green PVC insulation connected to common earth dolly complete all as specified and directed for the followings :- (a) One light/fan/Bell Point controlled by one single pole one way switch.

(b) One socket outlet on the same board controlled by one single pole one way switch

(c) One 5 amps socket outlet independent controlled by one single pole 5 Amp switch.

All as per Item No 174 mentioned here-in- before but one three pin 15 Amps switch socket out let on the independent board with 2.5 Sq mm PVC insulated copper conductor and 2.5 Sqmm copper conductor for continuous earthing complete.

Supply & Fixing Switch piano flush type single pole one way 5/6 Amp complete all as directed.

Supply & Fixing Switch piano flush type 15 amps, single pole one way complete all as directed.

Supply & Fixing Socket outlet 2 in one , 5/6 Amps flush type complete all as directed.

Supply & Fixing Socket outlet, 2 in one 6 pin 5 and 15 Amps piano flush type complete all as directed.

Supply & Fixing ceiling rose,PVC/Polycarbonate,isolated three terminals.

S & F bell push piano flush type 6 Amps 1 module complete all as directed.

S & F bell ding dong AC 230 volts single pole complete all as specified and directed

Supply & Fixing Lamp holder PVC/Polycarbonate,isolated with back plate suitable for batten fittings including 10W LED Bulb omplete all as specified and directed.

Supply & Fixing step type regulator Piano switch type ( 5 step) for ceiling fan 1200/1400 mm size 230 volts, 6 Amps.

Supply and Fixing exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm

Cutting holes making good the distributed surface, grouting nuts for fixing of Exhaust fans complete all as specified and directed.

Supply & Fixing LED tube light fitting 20 Watts,4 feet long decorative ultra slim linear LED lighting fixture with extruded polycarbonate,environmental friendly, energy efficient 230V, complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. Cat Part No LHEXBLP7PN1W020 Make - Havells or equivalent to Crompton/Bajaj/Philips

Supply & Fixing sheet metal enclouser double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series TPN DBs (Vertical type)fitted with ABS frame and 415 volts 200 Amps rated enameled bus bar 4 way dust and vermin proof ssuitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified

Supply & Fixing sheet metal enclouser double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series pre-wired SPN DBs, 240 volts 200 Amps rated bus bar,Neutral link,Earth bar and Din rail, 8 way dust and vermin proof suitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified.

Supply & Fixing MCCB 100 Amps, 415 volts, 16 KA, 4 Pole complete all as specified.

Supply & Fixing MCB, Single pole 240 V,6 - 32 Amps 10 KA 'B Series.

Supply & Fixing MCB, Single Pole and neutral 240 V, 32 Amps 10 KA 'B' series.

Supply & Fix in repair sub main wiring of 6 sqmm PVC insulated unsheathed FRLS cable multistranded copper conductor with earth wire of 6.0 sqmm PVC insulated unsheathed FRLS cable multistranded copper conductor including PVC conduit pipe 25 mm dia all as specified and directed. Note:-Two run of single core 6 sqmm cable and one run single core 6.0 sqmm cable for earth wire and including conduit pipe 25 mm dia shall measured as one length).

Earthing complete with galvanized steel plate elecrode of size 60 cm x 60cm x 6.0 mm thick burried directly in ground vertically to a depth not less than 2.5 mtr below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, earth lead GI wire of 4mm dia (8 SWG) by means of bolts , nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI earth wire is connected to main switch board and protected by light grade GI pipe of 15 mm bore. provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horrizontally to the earth pit. Cement concrete chamber of PCC ( 1:3:6 ) type C-2 using 40 mm graded stone aggregate.The chamber shall be constructed one metre away from edge of earth pit. 50 mm thick pre cast cover of cement conrete (1:2:4) type B-1 using 20 mm graded stone aggregate, excavation in soft / loose soil, returning filling and removal of surplus soil to a distance of 50 mm as directed and shown in Electrical Plate No- 3 of SSR Part-1 (2009)

Supply and Fixinging LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. complete all as specified and directed. Cat Part No. TRP-400-35-57-SL-LM-NSR of Crompton or equivalent of Bajaj/Havells/Philips

Supply and Fixing LED tube light fitting 1 X 18 W decorative ultra slim linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient 230V, complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. Cat Part No LHEXBLP7UN1W018 Make - Havells or equivalent to Crompton/Bajaj/Philips

Supply, laying , jointing and testing of cable XLPE insulated, screened, PVC bedded ,galvanized steel strip or wire armoured heavy duty electric cable with multistranded aluminium conductor, 1100 volts grade, laid in trenches or duct or passing through pipe or fixed to poles walls of size 10 Sqmm 2 core confirming to IS : 7098-1985 laid in trenches or passing through pipes/ducts or fixed to walls/poles complete all as specified and directed.

Supply, laying , jointing and testing of cable XLPE insulated, screened, PVC bedded ,galvanized steel strip or wire armoured heavy duty electric cable with multistranded aluminium conductor, 1100 volts grade, laid in trenches or duct or passing through pipe or fixed to poles walls of size 25 Sqmm 4 core confirming to IS : 7098-1985 laid in trenches or passing through pipes/ducts or fixed to walls/poles complete all as specified and directed.

Supply and Fixing Galvanized steel tube 40 mm dia light grade For protection of cable complete all as specified and as directed

Supply and laying galvanised mild steel tubing medium grade 25 mm bore with all fittings,laid in trenches,in floor/under road on wall complete all as specified

All as per item no 202 here-in- before but 20 mm bore complete all as specified

Material & labour for Cutting existing steel tubing for alterations or additions (Each cut measured) of Size 50 mm to 25 mm by insertion of TEE complete all as specified and directed.

Supply and lay bricks of old size sub class 'B' type for protection of U/G cable in trenches all as specified and directed.

V V AND COMPANY

Harmesh Kumar Sharma and Sons

JAWAHAR CONSTRUCTION COMPANY

Brar Enterprises

CHETAK CONSTRUCTION COMPANY

KAILASH CONSTRUCTION COMPANY

GS and Co