REPAIR/ REPLACEMENT OF ROOF TREATMENT, ROOF SHEET, WALL AND FLOOR FINISHES, PLUMBING, ROOF TREATMENT, ROOF SHEET AND CERTAIN B/R MISC REPAIRS IN MD AND OTM ACCN AT MIL STN KALKA UNDER GE JUTOGH

Amount

Dismantling of brick tiles or terracing tiles, single layer on roofs, incl cleaning of bricks/ tiles and removal of unserviceable from site, incl wire brushing and cleaning the roof surface with water, incl flashings and junction of parapets, etc., complete all as specified and directed.

M&L for Wire brusing and cleaning top surface of tiles, lime terracing or cement concrete, including flashings and junction of parapets, etc., and surface painting, with a layer of blown bitumen of any penetration applied hot @ 1.7 kg per sq. m. blinded with grit or pea size gravel @ 0.006 cu. m per sq. m, and lightly tampered (area of flashings, etc., shall be added to the roof area) complete all as specified and directed.

Demolition of mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed.

M&L for roof treatment, cleaning of old roof slab surfaces including sweeping clean &washing down with water to remove dust & providing water proofing treatment with polymeric standard water proofing membrane complete all as specified and directed as under:- (a) Preparation of plaster surfaces /RCC roof surfaces and applying one coat of oil bound bituminous primer @0.30 Ltr/sqm (b) Applying bitumen @1.20kg/sqm of grade 85/25 (c) Supplying and laying modified polymeric water proofing membrane super thermo lay 3mm thick of weight not less than 3.00kg /sqm reinforced with polyester non woven fabric weight not less than 150gm/sqm center core including coping on the surfaces with torch application of membrane with 10cm over laps as required and dorected. (d) Applying aluminium paint @ 0.20Kg/Sqm.

M & L for PCC 1:2:4, type B-1, using 20mm graded crushed stone agg as in roof kerb or mud stopes, padding on roof etc finished even and fair, average thickness as required to maintain proper slope complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4 on concrete surfaces of roof finished even and smooth without using extra cement mixed with water proofing compound of approved make as per manufacturers instructions on existing roof surfaces complete all as specified and directed. Note: WPC shall be measured and paid separately under respective item of BOQ.

Supply only Integral water proofing compound complete all as specified and directed.

Demolition of (reinforced) cement concrete of any description and in any position complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed.

Dismantling Asbestos cement (corrugated, semicorrugated , etc) sheets n roof coverings complete all as specified and directed.

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws as specified.

Dismantling wrought iron or mild steel work of any description in any position not otherwise provided for complete all as specified and directed.

Dismantling timber scantlings in framed/ unframed 40 sq. cm and over in section, in any position complete all as specified and directed.

M&L for framed work such as grills, gratings etc., with ends of bars shouldered or riveted, or forget into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work complete all as specified and directed.

S&F rolled section as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and fixed with angle cleats or other connecting plates incl welding etc of grade Fe-410 (Gde E-250) quality-B, complete all as specified and directed.

M & L for preparation of new or previously untreated steel surfaces of any descirption not otherwise described over 10cm width or grith and applying two coats of synthetic enamel paint over one coat of red oxide complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets or GI grid frame work complete all as specified and directed.

S&F GI frame work for ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 & 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section(not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.50mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre. size of grid 605mmx605mm incl Hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.

M & L 4mm thick non asbestos fibre cement building boards white/off white (E board designer) fixed or laid /inserted to timber/GI/Aluminium frame work with screws in ceiling flat or sloping complete all as specified and directed.

S & F Solid PVC Wall Lining consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall and false ceiling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed.

Taking down chowkats or frames with shutter not exc 1.5 sqm (without taking off shutters from frames) and removing from site including making good the distrurbed surfaces complete all as specified and directed.

Taking down chowkats or frames with shutter exc 1.5 sqm but n.exc 4.0 sqm (without taking off shutters from frames) and removing from site including making good the distrurbed surfaces complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm and not exc 2 Sqm each and removing from site complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm and not exc 2 Sqm each and refixing in same opening after necessary repair complete all as specified and directed.

S&F in repair steel rolling shutters,1.25mm thick without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; eerected in position as indicated, complete; but gear operated type with chain wheel and hand chain complete all as specified and directed.

S&F poweder coated (minimum thickness of powder coating 50 micron) Anodised aluminium section of any size for frame of doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S & F aluminum section powder coated of colour as approved door with frame and shutters partially glazing 5.5mm thick one side plain/colour glass and PVC composite board 5mm thick fixed with aluminium clip beeding. door section of aluminium door shutter as under complete and all as specified and directed (I) Frame 100x40x2mm (ii) shutter style 85x44.45x3mm thick section (iii) Top rail 95.25 x44.45x1.7mm thick (iv) middle rail 83.50x44.75x1.7mm thick (v) Bottom rail 114.30X44.15X1.7mm thick section (vi) Glazing clip 0.7mm thick (vii) 2 Nos Handle Powder coated Aluminium 200mm long as approved (viii) Tower bolt 9.90mm dia and 200mm long (ix) Mortice lock 100MM 7 LIVER (x) Hold fast aluminium 100mm long (xi) Reinforced with 2 No 10mm dia MS bar with bolt complete on top and bottom rail of door (Note: PVC/rubber lining brush for alround door) complete all as specified and directed.

S&F Aluminium anodised powder coated sliding type three track window with shutter and frame including aluminium grill and mosquito proofing net and 5 mm thick tinted glass , size of frame 91.50 x 31.75 x 1.3mm thick for top and sides, bottum and shutter frame 38 x 18 x 1.5mm thick, necessary handles, joining cleats, glazing clips, rubber packing, locking arengement, beeding etc. complete all as specified and directed.

S&F aluminium section powder coated of colour as approved for partition partrially g;lazing 5.5mm thick plain/colour glass and PVC completed board 5mm thick fixed with aluminium beading jpoining cleats, glazing clips, rubber packing section completed all as specified and directed with frame 62x40x2mm & glazingclip 0.7mm thick with rubber packing complete.consisting of with Frame 62x40x2mm and partially glazing with 5.5mm thick plain/ colour glass and partially with PVC board 5mm thick fixed with aluminium beading, joining cleats, glazing clips 0.7mm thick, rubber packing complete all as specified and directed.

Taking down aluminium door & window shutters exc 1.5 sqm and n exc 4.0 sqm each and refixing in same opening after repair/ replacement of unserviceable parts/ hardware etc. complete all as specified and directed. Note: Items need to be replaced shall be measured and paid saparately as supply only.

Supply only double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.

Supply only Aluminium (extruded section body) Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg complete all as specified and directed.

Supply only brass (extruded section body) Mortice lock, vertical type, size 100mm 4Levers suitable for aluminium door shutters complete all as specified and directed.

Supply only 5.5 mm thick plain glass, pin headed type and fixed with wooden beads in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed.

S&F Mild steel section powder coated of colour as approved door with frame and shutters of section 20mm gauge for in built cupboard frame domestic type of any size and design incl 2 Nos Handle Powder coated Aluminium 200mm long as approved (viii) Tower bolt 9.90mm dia and 200mm long (ix) Mortice lock 100MM 7 LIVER (x) Hold fast aluminium 100mm long (xi) Reinforced with 2 No 10mm dia MS bar with bolt complete on the brick wall complete all as specified and directed.

S&F steel windows of profile rectangular tube section with side hung shutters incl projecting type hinges with steel handles, MS peg stay with glazing bars, complete all as specified and directed.

S&F steel windows of profile rectangular tube section with side hung shutters incl projecting type hinges with steel handles, MS peg stay without glazing bars, complete all as specified and directed.

S&F steel window or ventilators, fixed type, with galzing bar complete all as specified and directed.

S & F 3 mm thick figured glass, pin headed type and fixed with wooden beads in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed.

S&F sheet glass 3mm thick ordinary quality and glazing with oil putty or wooded bead/aluminium clip built in squares not exceeding 0.5 sq.m in each pane, complete all as specified and directed.

S&F 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq.m in each pane. incl Hacking out old broken glass (any thicknesss, size,quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq.m in each pane. incl from metal frame inlcuding punching or drilling out old glazing pins/spring clips and providing and fixing new ones commplete all as specified and directed.

S & F pressed steel frames (made of 1.25 mm thick sheet) for door 125x60mm with one or more rebates incl necessary fixing lugs hinges lock strike plate etc including filling with PCC 1:3:6, Type C-0, complete all as specified and directed.

S & F pressed steel frames (made of 1.25 mm thick sheet) for door 105x60mm with one or more rebates incl necessary fixing lugs hinges lock strike plate etc including filling with PCC 1:3:6, Type C-0, complete all as specified and directed.

S&F 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both rail and stile as per IS : 1003faces. The size of (Part I), kiln seasoned and chemically pressure treated, supplied and fitted to chowkats complete all as specified and directed.

S&F 35mm thick IInd class hard wood glazed & skeleton shutters,open rebated & prepare to receive gauge, divided into squares, with plain, chamfered and rounded, mitred and rebated sash bars, any numbers members of shutters as specified SSR Pt-I , clause 8.24(a) complete all as specified and directed.

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F factory made solid PVC moulded door shutter with particle board core 28 to 30mm thick (stile) with 2, 4 or 6 raised panels designed with 2 mm thick moulded prelaminated PVC sheet on front face and 2 mm prelaminated PVC sheet on back face, supplied and fixed to frame at site as per specification and drawing , complete all as specified and directed.

S&F Butt hinges 100mm long, extruded aluminium alloy with galvanised mild steel hinge pin, anodisedand fixed, type B-22 complete all as specified and directed.

S&F 200mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 125mm long extruded aluminium alloy handles, cast type, anodised fixed complete all as specified and directed.

S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm complete all as specified and directed.

M&L PCC 1:3:6, type C-1, using 20mm graded crushed stone aggregate as in filling back of pressed steel frame complete all as specified and directed

S& F stainless steel wire cloth 0.36mm nominal dia or wire and average width or aperture 1.4mm and fixed with stainless steel wire staple in complete all as specified and directed.

S& F in repair stainless steel wire cloth 0.36mm nominal dia or wire and average width or aperture 1.4mm and fixed with stainless steel wire staple in complete all as specified and directed.

M & L for preparation of new or previosuly untreated wooden surfaces of any description not otherwise described over 10cm width or grith and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

S&F 300 mm, MS ordinary rat tail rod pattern spring incl roller& roller plate & welding if necessary complete all as specified.

S&F in repair Prelaminated particle board, 18/19mm thick interior grade, prelaminated one side with deocrative choice lamination & other side balancing white lamination, incl fixed with screws to timber frame work as in cup board , cabinets and similer type of work icl fixed on wall with fastener or suitable arrangement complete all as specified and directed.

S&F in repair Prelaminated particle board, 12mm thick interior grade, prelaminated one side with deocrative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in cup board , cabinets and similer type of work complete all as specified and directed.

M&L for plain fillets of IInd class hard wood, square or rectangular in section, clean sawn, secured with nails or brads; sectional area exceeding 03 Sqcm but not exceeding 06Sqcm complete all as specified and directed.

M&L for plain fillets of IInd class hard wood, square or rectangular in section, clean sawn, secured with nails or brads; sectional area exceeding 13 Sqcm but not exceeding 25 Sqcm complete all as specified and directed.

Demolition of brick or stone masonry, built in cement mortar incl all quoins, pillars, arches etc but excluding ashlar facing complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6) complete all as specified and directed..

Dismantling, floor, hearth or wall tiling including cement mortar bedding and, removing rubbish off the premises complete all as specified and directed.

M&L for Glazed ceramic colored tiles on vertical surface such as in skirting/dado of size 350x250x7mm/ 450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match to coloured tiles.over Including 10 mm thick backing coat in CM 1:4 complete all as specified and directed.

M&L for Non Skid ceramic coloured tiles 7 to 8 mm thick square/ rectangular area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed with cement mortar 1:6 complete all as specified and directed.

M & L for Vitrified Ceramic tiles light shade (square / rectangular) of 8 to 9mm thick, double charged/ Ultra charged, of size 600x600mm as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick screed bed with CM 1:6, complete all as specified and directed.

M&L for Non skid ceramic coloured tiles 7 to 8mm thick square/rectangular area of each tile exceeding 0.18 sqm but not exceeding 0.38 in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed with cement mortar 1:6 complete all as specified and directed.

M&L for granite (of any type) 19-20 mm thick in steps, jambs, pillars, window Cills, and top of kitchen platform and top of counter top wash basin etc set and jointed in neat cement slurry and pointed with coloured cement to match cutting and polishing complete fixed over and including 10 mm thick screed bed in CM 1:3 complete all as specified and directed.

Rounding to edges of granite stone slab one edge, such as in steps, cooking platform, and other similar situation complete all as specified and directed.

M&L for 300 x 300 or 400x400, 9 to 10 mm thick, coloured, Endura heavy duty tiles, pre cast factory made, laid in floors or fixed to wall, set and jointed in neat cement slurry and pointed with white cement with pigment to match the colour of tiles, laid over and incl 20 mm thick screed bed in CM (1:6), surface finished even and rough to receive the tiles complete all as specified and directed.

Taking down of cement plaster incl raking out of joints hacking for key scrubbing down with water complete all as specified and directed.

M & L for 15mm thick rendering in CM 1:6 on other than fair faces of brick work or concrete surface finished even and smooth, complete all as specified and directed.

M & L for 15mm thick rendering in CM 1:4 on fair faces of brick work or concrete surface mixed with liquid water proofing compound as per manufacturer's instruction finished even and fair complete all as specified and directed. Note: WPC shall be measured and paid separately under respective item of BOQ.

M&L for preparation of new plastered surface of wall and applying two coats of oil bound distemper over and incl 2-3 mm thick layer of wall care putty, complete all as specified and directed.

M&L for preparation of new plastered/ putty surface of wall and applying two coats of oil bound distemper, complete all as specified and directed.

M & L for preperation of new plastered surface of wall and applying two coats of cement base paint complete all as specified and directed.

M&L for complete removal of existing treatment on wall (any number of layers) by scrapping with steel scrappers or any other means and applying two coats of cement base paint incl preparation of surface complete all as specified and directed.

M&L for complete removal of existing treatment on wall (any number of layers) by scrapping with steel scrappers or any other means and applying two coats of oil bound distemper over a coat of primer incl preparation of surface complete all as specified and directed.

M&L for applying two coats white wash on old treated plastered surfaces of ceiling, incl preparation of surfaces, complete as specified and directed.

M&L for applying one coat of oil bound distemper on old treated surfaces of wall, incl preparation of surfaces, complete as specified and directed.

M&L for applying one coat of cement base paint on old treated surfaces of wall, incl preparation of surfaces, complete as specified and directed.

M&L for applying one coat of white wash on old treated surfaces of ceiling, incl preparation of surfaces, complete as specified and directed.

M&L for applying one coat of white wash on old treated surfaces of wall, incl preparation of surfaces, complete as specified and directed.

Taking up or down 15mm bore steel water tubing and connections incl cleaning for refixing or removal from site of 15mm bore complete all as specified and directed.

Taking up or down 20mm bore steel water tubing and connections incl cleaning for refixing or removal from site o complete all as specified and directed.

S & F 15mm bore galvanised steel water tubes medium grade with all fittings and fixed to walls and ceilings or laid in floor complete all as specified and directed.

Re-fixing old steel tubing 15 mm bore with new fittings and connections in new or old positions, complete all as specified and directed.

S & F 20mm bore galvanised steel water tubes medium grade with all fittings and fixed to walls and ceilings or laid in floor complete all as specified and directed.

Re-fixing old steel tubing 20 mm bore with new fittings and connections in new or old positions, complete all as specified and directed.

S & F in repair vitreous China wash down water closet pan (pedestal pattern), white (excluding flushing cistern and flush pipe) but including plastic water closet seat cover white/ coloured closed pattern with flat bottom and cover with PVC hing devise, fixing bolt for pedestal pattern and cast iron 'P' or 'S' trap complete all as specfied and directed.

S&F in repair Vitreous china premium/1st quality wash down water closet wall hung pattern incl all necessary accessories like rag bolts/gel gasket etc. (excluding flushing cisteran & flush pipe) complete all as specified.

S & F in repair viteous china squating pan " ORISSA PATTERN" of size 580x450 mm white with integral foot rest or back inlet and making good the floor with PCC 1:2:4 type B-1 complete all as specified and directed.

S&F in repair PVC water closet seat cover , white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified.

S & F in repair 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with intel, ball valve, float, flush pipe and handle including brackets complete all as specified and directed.

S&F in repairs Health Faucet (ABS body) with 1.25 mtr long metalic expandable tube & hook complete all as specified and directed.

S&F in repairs PTMT jet spray with 1mtr PVC tube, (suitable for European seat) complete all as specified and directed.

S&F in repair toilet paper holder,chromium plated with flat recessed type stainless steel, fixed to wall with chromium plated brass screws and rawl plugs complete all as specified and directed.

S&F in repair wall hung wash basins with full common pedestals vitreous china back of size 550x 400x290 mm, padestal height 800mm, including CI brackets, chromium plated waste coupling, waste pipe and fittings, complete all as specified and directed. Make: CERA Model : CANA S2040119, S2090113 or equvalent as per Appx 'B'.

S&F in repair ovel type counter top vitreous china wash hand basin white of size 520 x 440mm including CI brackets , chromium plated waste coupling, waste pipe etc., complete all as specified and directed. Make: CERA Model : CLAIR S2030101 or equvalent as per Appx 'B'.

S&F in repairs, vitreous China wash hand basin, white, flat back size 550 x 440mm including CP brass waste coupling, 600 mm long 32mm bore HDPE waste down pipe including CI brackets complete all as specified and directed.

S & F in repair 15mm pillar tap CP cast copper alloy with capstan head screwed down high pressure with or without lettered hot or cold with long shank and fly nuts fancy type complete all as specified and directed.

S&F in repair chromium plated brass basin mixer for mixing hot and cold water, screwed down for 15mm bore GI pipe complete all as specified & directed.

S & F in repair 15mm bore bib tap fancy type chromoim plated long body cast copper alloy with crutch or butterfly handle screwed down secrewed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair stainless steel grating openable type 100mm dia with/ without hole complete all as specified and directed

S & F in repair stop valve of 20mm bore cast copper alloy fancy type chromium plated screwed down high pressure with crtuch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

S & F in repair brass chrominum plated shower rose 125mm size and 30cm long CP brass pipe with or without swivel joint incl fixing to steel pipe of size 15mm bore complete all as specified and directed.

S&F in repair vitreous china soap dish approx size 160x 60x 90mm thick fixed to wall with chromium plated brass screws and cup washer complete all as specified.

S&F in repair chromium plated brass, Tubler towel rail, 20mm dia D type 60 CM long between flanges complete all as specified and directed.

S&F in repair 45 cm long (PVC connection) 15 mm bore with PTMT nut complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm incl waste coupling and waste pipe complete all as specified and as directed .

S & F in repair PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed to walls etc complete all as specified and directed.

S & F in repair PVC (SWR) pipes 75 mm bore single socketed in any length with rubber ring joints fixed to walls etc complete all as specified and directed.

S&F in repair 75 mm bore, PVC (SWR), floor trap, plain with grating including jointing with solvent, cement, complete all as specified and directed.

S&F in repair 110 mm bore, PVC (SWR), Junction, (Single T/Y), equal or unequal with access door complete all as specified and directed.

S&F in repair 75 mm bore, PVC (SWR), Junction (Single T/Y), equal or unequal with access door complete all as specified and directed.

S&F in repair 110 mm dia PVC (SWR) bends with access door complete all as specified and directed.

S&F in repair 75mm dia PVC (SWR) bends with access door complete all as specified and directed.

Dismantling water tanks exc. 250 ltrs & n. exc. 500 ltrs capacity and removing from site complete all as specified and directed

Dismantling water tanks exc. 500 ltrs & n. exc. 1000 ltrs capacity and removing from site complete all as specified and directed

S&F rotational moulded polyethylene 500 Ltrs capacity water storage tanks (cylindrical vertical with closed top) three layer, hoisted and fixed in position as specified in SSR Part-I complete all as specified and directed.

S&F rotational moulded polyethylene 1000 Ltrs capacity water storage tanks (cylindrical vertical with closed top) three layer, hoisted and fixed in position as specified in SSR Part-I complete all as specified and directed.

Refixing of rotational moulded polyethylene 500 Ltrs capacity water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position as specified in SSR Part-I complete all as specified and directed. Note: Tank obtained from dismentling shall be refixed.

Refixing of rotational moulded polyethylene 1000 Ltrs capacity water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position as specified in SSR Part-I complete all as specified and directed. Note: Tank obtained from dismentling shall be refixed.

S&F ball brass valve high pressure with polythelene float and fly nut complete screwed for iron pipe and fixed 20mm bore complete all as specified and directed

S & F 20mm CI gate valve, with high pressure with crutch or butterfly handle, screwed both ends for iron pipe or union complete all as specified and directed.

S & F 15mm CI gate valve, with high pressure with crutch or butterfly handle, screwed both ends for iron pipe or union complete all as specified and directed.

m/s jupiter builders

R. P. Suppliers and Construction Co.