PROVN OF BOUNDARY WALL AT 1806 PNR UNIT, PROVN OF PATHWAY AND SECURITY FENCE IN DILKUSHA AND RAK SF ACCN, ADDN/ALT TO EXTG LIGHTS WITH LED FLOOD LIGHTS AT SAL BAHADUR AND DILKUSHA OFFRS ENCLAVE AND SPL REP TO BLDG NO 17C GAUR ENCLAVE UNDER GE W LKO

Amount

Demolition of brick work or stone/ boulder masonary, built in cement mortar or cement lime mortar including all quions, arches, pillars, etc. but excluding ashlar facings, dressed stone work and precast concrete articles etc. complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Dismantling stone slabs and tiles of any description and thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

Taking down cement or cement lime plaster any description from walls/ceiling etc including racking out joints, hacking for key & scrubbing down with water all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area n. exc 1.50 Sqm each complete all as specified and directed. (Note:- cutting hole in wall is deemed to be included in the rate quoted)

Taking down shutters of any description area exc 1 Sqm but not exc 2 Sqm each complete all as specified and directed.

Taking down shutters of any description area exc 1 Sqm but not exc 2 Sqm each and refixing in same opening after easening complete all as specified and directed.

Taking up or down 15mm bore pipes steel tubing and connections including cleaning for refixing or removing to store or removing from site complete all as specified and directed.

Taking up or down 20mm bore pipes steel tubing and connections including cleaning for refixing or removing to store or removing from site complete all as specified and directed.

Taking down eaves gutters rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan necks, etc. including cleaning for refixing or removal from site (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section embeded in concrete, brick work, masonary etc., including taking out embedded portion and making good disturbed gound complete all as specified and directed.

Dismantling fencing wire mesh of any type or size complete all as specified and directed.

Excavating in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out in soft/ loose soil complete all as specified and directed.

Excavating in post holes (or similar holes) each n.exc. 0.5 cum getting out, returning, filling in, and ramming earth or broken rubble mixed with earth around in layer n.exc. 25 cm including watering and removing surplus soil to a distance n. exc 50m and making good surface in soft/ loose soil complete all as specified and directed.

Surface excavation not exceeding 30cm deep and averaging 21cm deep and getting out in soft/ loose soil complete all as specified and directed.

Returning, filling in, trenches including spreading, levelling, watering and well ramming in layers not exc. 25cm in soft/ loose soil complete all as specified and directed.

Removing surplus excavated material soils n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.

Removing surplus excavated material soils exc. 250m but n.exc. 500m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.

M&L for hardcore of broken stone or boulders of gauge not exc 63mm, deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M & L for sand filling under floors or pavings laid in layers not exc 15cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed.

M&L cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed.

M&L Cement Concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps, seismic and other bands, plinth courses, string courses, lacing courses, parapets and railing upto 60cm in height, copings, kneelers, apex stones, bed plates, water troughs, hold fasts and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and directed.

M&L RCC M-25 (Design mix) using 20mm graded stone aggregate as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc. basements slabs, under reamed piles and mass concrete and similar works complete all as specified and directed.

M&L RCC M-25 (Design mix) using 20mm graded stone aggregate as in columns, pillars, piers, posts and struts and similar works complete all as specified and directed.

M&L RCC M-25 (Design mix) using 20mm graded stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5 m span etc. and similar works complete all as specified and directed.

M&L Mild Steel TMT/plain round bars 10mm dia and over, cut to length, bent to shape required, including cranking and binding with and including mild steel wire (annealed) not less than 0.9mm dia for securing chain link fencing fencing complete all as specified and directed.

M&L brick work with old size fly ash bricks of class designation 75, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

All as per item No. 28 above but except bricks (Note : Old bricks obtained from demolition of brick work of any designation shall be used under this item)

M&L for brick work with old size fly ash bricks of class designation 75, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.

M & L Cutting chases, pinning in, for concealed water tubing etc. in brick walls and making good to disturbed surface in cement mortar 1:3, cutting not exceeding 10cm in girth complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces of wall and finished surface even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 with integral water proofing compound @ 3% by weight of cement on fair faces of brick work or concrete surface of wall and finished surface even and smooth without using extra cement complete all as specified and directed. NOTE: WPC shall be measured and paid seperately under respective item.

M&L for rendering 10mm thick in CM 1:4 with integral water proofing compound @ 3% by weight of cement on fair faces of brick work or concrete surface of wall and finished surface even and smooth without using extra cement complete all as specified and directed. NOTE: WPC shall be measured and paid seperately under respective item.

M&L for rendering 10mm thick in CM 1:3 on ceiling finished surface even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces of wall and finished surface even and smooth without using extra cement complete all as specified and directed.

Supply only integral waterproofing compound complete all as specified and directed.

M&L 75mm thick cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in sub bases of floors and pavings etc.complete all as specified and directed.

M&L Cement Concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in roof kerbs or mud stops and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and directed.

Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work, vertical or to batter for rough finished surface complete all as specified and directed.

Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions and similar works for rough finished surfaces complete all as specified and directed

Use and waste of Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc for rough finished surface complete all as specified and directed.

M&L Mild Steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L Mild Steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L mild steel framed work such as posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting and/or welding etc. and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F structural steel framed work with rolled mild steel sections as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing conforming to Fe-290 (Gde E-165) complete all as specified and directed.

Supply only 3mm dia GI wire chain link fencing of mesh size 75x75mm and any type complete all as specified and directed. NOTE: Weight constant of fencing shall be fixed by BOO.

Fixing only chain link fencing including line wires, any mesh size and type to any type of standards rails, straining bolts, etc. including provn of galvanised mild steel binding wire of 0.9mm dia annealed complete all as specified and directed.

Supply only mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, 5 to 10mm dia of neck, length of bolts exc. 5cm but not exc 10cm long complete all as specified and directed.

M&L Mild Steel TMT bars 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossings with and provn of galvanised mild steel wire, staples or steel pins etc. complete all as specified and directed. NOTE: Each line wire to be measured.

S&F Concertina coil fencing with punched tape coil 450mm dia (at stretched position), made out of hot dipped, galvanised steel wire coated with CLR anti corrosive paint, making diamond shape barbs with 18 SWG sheet, spring core 2.5mm thick wire with tape 0.52mm thick and weight of each coil should not be less than 7.50 Kg, each coil should have 50 rounds and should covers 6 RM length, fixed over and including 6 lines of horizontal RBT (reinforced barbed tape) wire or razor wire at points wherever coil touches the bottom of wire with the help of hog rings (14 SWG) and in between Y shaped angle iron post complete all as specified and directed. NOTE: (i) Hogging shall be fixed at a interval of 600mm centre to centre, wherever it touches with the razor wire. (ii) Overlapping of concertina coil and razor wire shall be 300mm. (iii) Y shaped angle iron post shall be measured and paid separately under respective items. MAKE: M/s Global Engg or M/s Specials steels Ltd or M/s Super Fence or other equivalent make as approved by GE.

S&F 75mm bore PVC (SWR) pipes single socketed in any length, fixed in walls for weep holes complete all as specified and directed.

M & L for factory made Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade as in hard standing with grey cement and pigment complete all as specified and directed.

M&L for joint free non skid ceramic tiles, coloured, superior quality, 7 to 8mm thick, (square/ rectangular), area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and directed.

M&L for joint free glazed ceramic tiles, coloured, superior quality of size 300x450x7mm/ 450x350x7mm thick, in vertical surfaces etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for dark shade double charged vitrified ceramic tiles 10 mm thick(square/rectangular) polished, area of each tiles exc 0.42 Sqm but not exceeding 1 Sqm, in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and directed.

M&L 18-20 mm thick granite stone slab, machine cut and polished as in shelves, cooking platform etc., bedded and jointed with grey cement slurry and pointed with white cement (1:2) using marble dust with admixture of pigment to match the shade of granite stone, laid over and including 20mm thick screed bed in cement mortar 1:4, including rubbing, grinding, making hole for gas pipe line and including making sandwitch moulding to edges complete all as specified and directed.

M&L 18-20 mm thick granite stone slab, machine cut and polished as in partiotion to cupboards including rubbing, grinding and including making round moulding to exposed edges complete all as specified and directed.

S&F 15mm bore Steel water tubing 'medium grade', galvanised with all fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floors complete all as specified and directed.

S&F 20mm bore Steel water tubing 'medium grade', galvanised with all fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floors complete all as specified and directed.

S&F in repairs 100mm bore cast iron sand cast soil waste and vent pipes in any length with or without ears with cement joints fixed to walls with ms clamps complete all as specified and directed.

S&F in repairs 75mm bore cast iron sand cast soil waste and vent pipes in any length with or without ears with cement joints fixed to walls with ms clamps complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls with PVC clamp complete all as specified and directed.

S&F PVC (SWR) bends of any radius, suitable for 110mm bore PVC pipes, fixed and jointed with solvent complete all as specified and directed.

S&F in repairs 100mm bore cast iron, branch pieces, single, equal or unequal, ordinary or inverted (spigot or socketed type) or with parellel branches jointed with cement mortar complete all as specified and directed.

S&F in repairs cast iron bends of any radius diminishing pieces or tapers, suitable for 100mm bore CI pipes, fixed and jointed with cement mortar complete all as specified and directed.

S&F in repairs cast iron bends of any radius diminishing pieces or tapers, suitable for 75mm bore CI pipes, fixed and jointed with cement mortar complete all as specified and directed.

S&F cast iron Nahani trap, with gratings including jointing to waste pipe fixed in cement concrete type B1 1:2:4 for 100mm bore of outlet complete all as specified and directed.

S&F cast iron Nahani trap, with gratings including jointing to waste pipe fixed in cement concrete type B1 1:2:4 for 75mm bore of outlet complete all as specified and directed.

S&F in repairs vitreous china Wash basin, white, flat back type of size 550x400mm including CP waste coupling and 32mm dia waste pipe and fixing of 02 nos brackets made out of 40x40x5mm MS angle iron etc. complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan, pedestal pattern, white, cascade type with built in flushing cistern and plastic water closet seat cover, white, complete all as specified and directed. Make :- Jaquar(LYRIC) Cat part No. LYS-WHT-38851S(S-300)/ Parryware (Qube plus) Cat part No. C849F(S-305)/ Plumber (Prive) Cat Part No. PBW-OWC-3008 (S-300)/ Hindware (SPLENDER) Starwhite Cat part No. 92519 S-30

S&F in repairs Vitreous China squatting pan, 'Orissa pattern', size 580x440mm, white, with integral foot rests including PVC 'P' or 'S' trap, excluding flushing cistern and flush pipe, including connection to trap and flushing pipe etc. and making good to floor complete all as specified and directed.

S&F in repairs PVC valveless, syphonic action type, low level, flushing cistern of 10 lit capacity, white, with inlet, ball valve, float valve and handle including bracket, rubber cone and flush pipe etc. and connection to pipes complete all as specified and directed.

S&F 15mm bore PVC connections, superior quality, with CP brass/PVC nuts of length 450mm complete all as specified and directed.

S&F central hole basin mixer, quarter turn, fancy type, brass chromium plated, with round spout with popup waste system, including plugging and fixed, suitable for 15mm bore pipe complete all as specified and directed. Make: Jaquar Essco cat no. TQT516A or Hindware cat no. F280009CP.

S&F in repair single lever wall mixture 3-in-1 system with provision for overhead shower with 115 mm long bend pipe, connecting legs and wall flange(without over head shower) screwed down for 15 mm bore GI pipe complete all as specified and directed. Make :- Jaquar(KUBIX PRIME) Cat part No. KUP-35117PM/ Plumber (ZEUS) Cat part No. ZE-3101LB, (ORNAMIX PRIME) Cat part No. ORP-10117PM

S&F in repair 15 mm bore single lever sink mixture central hole for WHB system without popup waste system with 450 mm long braided hoses complete all as specified and directed. Make :- Jaquar/ Plumber /Hindware

S&F bib taps 15mm bore, half/quarter turn, fancy type, long body, cast copper alloy, chromium plated, screwed for iron pipe or for brass ferrule including all accessories complete all as specified and directed.

S&F in repairs concealed stop valves 15mm bore, fancy type, cast copper alloy, chromium plated with long shank and cup screwed down, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs stop cock/angle valves 15mm bore, fancy type, cast copper alloy, chromium plated with long shank and cup screwed down, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs brass chromium plated overhead shower rose with arms, 125mm size, round shape, single flow, fancy type, suitable for 15mm bore pipe and fixed complete all as specified and directed.

S&F in repairs CP brass soap dish , fancy type, as per sample approved complete all as specified and directed.

S&F 20mm bore Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repairs hand shower (health faucet), superior quality, round shape, single flow, brass chromium plated, with 1m long chrome finish flexible pipe with wall hook bracket etc. and all fittings for EWC complete all as specified and directed.

S&F in repairs CP brass toilet paper holder, fancy type, with wall hook, bracket complete set as per sample approved complete all as specified and directed. Make : Jaquar Cat No. 573 or equivalent of Marc/ESS-ESS

S&F in repairs CP brass tubular towel rail 20mm dia, 'D' type, 600mm long between flanges, superior quality, fancy type, fixed to wall with PVC gully and CP brass screws complete all as specified and directed.Make : Jaquar Cat No. 7711 or equivalent of Marc/ESS-ESS

S&F in repair PVC bath cabinet/ mirror cabinet (multi utility) with 4mm thick looking mirror of overall size 560x410mm complete all as specified and directed. Make: Commander/ Polytuff/ Prayag

S&F in repairs 10mm thick sheet glass corner shelf assembly, fancy type, sheet glass shelf of size 250x250mm, with CP bracket guard and railing, fixed to wall with PVC gully and CP brass screws complete all as specified and directed. Make : Jaquar Marc/Prayag

S&F in repairs 5.5mm thick sheet glass shelf assembly, fancy type, sheet glass shelf of size 600mm long and 120mm wide with CP bracket guard and railing, fixed to wall with PVC gully and CP brass screws complete all as specified and directed.

S & F 300mm long stainless steel six peg hanger chromium plated as approved by Eng-in-charge complete all as specified and directed.

S&F in repair stainless steel sink with drainage board made out of 1mm thick sheet with plugs, washers incl brackets fixed to wall and connecting union to pipe overall size 1145mm x 510mm, bowl size 560x410x200mm including PVC waste pipe and waste coupling 40 mm dia complete all as specified and directed.

S&F in repair stainless steel kitchen plate rack (utensil rack) of size 750x600x250mm, made out of 0.63mm thick stainless steel sheet, approved design and fixed to wall with brass screws and PVC gully including all necessary fittings like nuts and bolts etc complete all as specified and directed.

S&F500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), hoisted and fixed in position including dismantling old water tank in any position complete all as specified in SSR Part-I and directed.

S&F 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), hoisted and fixed in position including dismantling old water tank in any position complete all as specified in SSR Part-I and directed.

S&F ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe or brass ferrule and fixed suitable for 20mm bore pipe (Min weight 210gms) complete all as specified and directed.

S&F flush shutters 30 mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc, divided into squares, with plain, chamfered or rounded, metred and rebated shash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut or mitred beads for securing glass, gauge etc sizes of members of shutters as specified in SSR Part-I Section 8 clause 8.24(a) and fitted to chowkats complete all as specified and directed.

M&L for 5.5mm thick sheet glass, ordinary type and glazing with oil putty or wooden beads/aluminium beading in square, area n.exc 0.5 Sqm in each pane complete all as specified and directed.

S&F 75x50mm single rebated factory made, 100% Solid WPC (Wood ploymer composite) paintable door frame made from 100% lead free (single extruded process) material with density not less than 780 Kg/Cum complete all as specified and directed. (Note :- (i) Door frame shall be water proof, termite proof, fire retardant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life. (ii) Rate includes M & L for fixing the frame with minimum 06 Nos holdfast / dash through bolts of suitable size as directed.)

S&F 60x63mm single rebated factory made, 100% Solid WPC (Wood ploymer composite) paintable door frame made from 100% lead free (single extruded process) material with density not less than 780 Kg/Cum complete all as specified and directed. (Note :- (i) Door frame shall be water proof, termite proof, fire retardant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life. (ii) Rate includes M & L for fixing the frame with minimum 06 Nos holdfast / dash through bolts of suitable size as directed.)

S&F 28 mm thick factory made, 100% Solid PVC flush shutter made from co-extruded three layer rigid foam sheet (Single extruded) with 0.8 to 1mm thick plain/decorative sunmica outer layer having density not less than 1400 Kg/Cum and central core not less than 600 Kg/Cum manufactured by an ISO 9001/2015 certified company complete all as specified and directed

S&F 19 mm thick factory made, 100% Solid PVC flush shutter made from co-extruded three layer rigid foam sheet (Single extruded) with 0.8 to 1mm thick plain/decorative sunmica outer layer having density not less than 1400 Kg/Cum and central core not less than 600 Kg/Cum manufactured by an ISO 9001/2015 certified company complete all as specified and directed

S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S&F 200mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 100mm size mild steel butt hinges, medium weight cold rolled, bright finish and fixed with screws complete all as specified and directed.

S&F 150mm size extruded aluminum alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 100mm size extruded aluminum alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 100mm long Aluminium anodised, hasp and staple, with mild steel pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F 300mm long, mild steel, ordinary rat tail rod pattern springs including including roller and roller plate complete all as specified and directed.

S&F in repair 25mm dia stainless steel curtain rod, superior quality, with end brackets and end knobs and fixed to wall with wooden plug/ PVC gully with CP screws and cup washers complete all as specified and directed.

S & F 18/19mm thick 1st quality plywood interior grade both side with commercial face, grade BWR, type BB fixed with screw/ nails to timber frame work edge chamfered complete all as specified and directed.

M&L 0.90mm thick decorative laminates type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.

S&F Continuous (piano) hinges, mild steel, bright finished or electro galvanised, with width of flap 30mm when open, and fixed with screws complete all as specified and directed.

S&F Ball catches (magnet catcher) with 8mm dia steel ball, brass body and striking plate including letting in, overall size 50x15mm and fixed to shutter complete all as specified and directed.

S&F cloth hanger rod 18-20mm dia steel chromium plated for hanging clothes in wardrobe including suitable brakets complete all as specified and directed.

S & F in repairs Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or wooden beads complete all as specified and directed

S & F Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or wooden beads complete all as specified and directed

M&L for two coats of cement base paint over one coat of primer on newly plastered surfaces of wall including preparation of surfaces complete all as specified and directed.

M&L for two coats of cement base paint over one coat of primer on old previously treated surfaces of wall including washing, rubbing and removing existing treatment and preparation of surfaces complete all as specified and directed.

M&L for three coats of white wash on new plastered surfaces of wall including preparation of surfaces complete all as specified and directed.

M&L for one coat of white wash on old surface of walls including preparation of surfaces complete all as specified and directed.

M&L for two coats of oil bound distemper on previously treated/untreated plastered surfaces of wall over one coat of primer and 1mm thick layer of wall care putty including preparation of surfaces complete all as specified and directed.

M&L for three coats of white wash on new plastered surfaces of ceiling including preparation of surfaces complete all as specified and directed.

M&L for two coats of white wash on old plastered surfaces of ceiling including preparation of surfaces complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of wood or wood based materials of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of old or previously treated surfaces of wood or wood based materials of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel or iron of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for two coats of cement base paint on old previously treated surfaces of wall including washing, rubbing and preparation of surfaces complete all as specified and directed.

M&L provn of roof treatment with polymeric water proofing membrane all as given below:- (a) Taking down existing roof treatment of any description and removal of waste material from site including cleaning of surface. (b) M & L for rendering 10mm thick in cement mortar 1:3 using 100% coarse sand on roof surface incl WPC as per manufacturers instructions. (c) Applying a coat of bituminous primer conforming to IS: 3384-1986 @ 0.25 Iit/sqm on prepared surface and allowed to dry. (d) Applying and laying 3mm thick APP membrane having non woven polyester matt at core and covered with high quality polymeric asphaltic protected thermo fusible HMHDPE film on both sides with over laps 10cm and 15 cm at longitudinal and transverse direction respectively and sealed by flame, sealing all overlaps complete including treatment at all junctions and corners. The membrane shall be torched into groove on vertical plane and groove sealed with cement mortar 1:3. (e) M&L for PCC tiles 25cmx25cmx20-22mm thick machine pressed, set, jointed and pointed in floors/terrace over and including 15mm thick cement screed bed in CM 1:4 complete all as specified and directed.

Taking down copper/ aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors etc. to match the existing complete all as specified and directed. NOTE: Credit for this items shall be made as per conditions separately.

M&L for point wiring complete for one light point or one fan point controlled by one, one way 5 Amp modular switch with PVC (FRLS) insulated unsheathed multistranded copper conductor of size 1.50 sqmm nominal cross sectional area single core drawn in and including 20mm dia 'medium grade' PVC concealed conduits ISI marked and fittings, including pressed steel concealed GI terminal switch boxes not less than 1.6mm thick of reqd size factory made complete including 1.50 sqmm nominal cross sectional area PVC(FRLS) insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories complete all as specified and directed.

All as per item no 134 above but for one bell point controlled by one bell push.

All as per item no 134 above but for one 5 pin 5 Amp socket outlet point on an independent board.

All as per item no 134 above but for one 5 pin 5 Amp socket outlet point on the same board with other switch.

All as per item no 134 above but for one 6 pin 15/16 amps socket outlet point on an independent board with cables of size 2.50sqmm and green colour earth cable of size 2.50sqmm.

S&F Modular switch 1 way 6A, 1 module complete all as specified and directed.

S&F Modular Bell push 6A 1 module complete all as specified and directed.

S&F Modular switch 1 way 16A, 1 module complete all as specified and directed.

S&F Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed.

S&F Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed.

S & F Fan step regulator, 120W - 2 module (Modular) complete all as specified and directed.

S & F white cover plate with frame modular type of 03 module complete all as specified and directed.

S & F white cover plate with frame modular type of 04 module complete all as specified and directed.

S & F white cover plate with frame modular type of 06 module complete all as specified and directed.

S & F white cover plate with frame modular type of 08 module complete all as specified and directed.

M&L for point wiring complete for one light point or one fan point controlled by one, one way 5 Amp switch with PVC (FRLS) insulated unsheathed multistranded copper conductor of size 1.50 sqmm nominal cross sectional area single core drawn in and including 20mm dia 'medium grade' PVC concealed conduits ISI marked and fittings, including pressed steel concealed terminal switch boxes not less than 1.6mm thick of reqd size factory made duly painted inside and outside with one coat red oxide primer, 3mm thick plastic laminated bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC(FRLS) insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories complete all as specified and directed.

S&F Switch piano, flush type, single pole, one way 5/6 Amp 230 Volts complete all as specified and directed.

S&F call bell (Ding dong) AC 230 Volt complete all as specified and directed.

S&F ceiling rose, 3 terminal, PVC/ Polycarbonate, insulated body, surface bakelite sheet 63.50mm dia complete all as specified and directed.

S&F Lamp holder PVC/ Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

Supply and Fixing wall/surface mounting luminaires integrated LED Batten 22 W, 6000 K,110 lumens/watt , 230V with extruded Aluminium housing 4 feet long with frosted PMMA/PC diffuser & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements all as specified and directed by Engr-in-charge. Make Phillips Smart brite cat no BN 021 LED 22S 6500 PSU GR/SI or/Havells Endura linear neo cat no enduralinear neo BS22WLED865SPCWH/ Bajaj LED batten BCLAB 20W WH LED P

Supply and fixing wall/surface mounting luminaires (Mirror Light) integrated LED Batten( 2 feet) 10/12 W, 6500 K, 230V ,100 lumens/watt,with extruded aluminium housing & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements all as per specified and directed by Engr-in-charge.Make:Phillips smart brite cat no BN 021 LED 12S 6500/4000 PSU GR/SI or/Havells Endura linear neo cat no enduralinear neo BS10WLED865SPCWH/ HPL Neptune plus 10 w HLPT51510CW

S& F in repair Decorative wall light fixture made up of Metal base, synthetic white in colour and square/round metal base with bend pipe and glass globe with nickel finish, ( B-22/E27 base), with 01 No. 7/9 W LED Bulb, 230 V, 6000K, complete incl all required electrical connecting arrangements all as specified and as directed. Make Phillips Model Grace or Jaquar lighting cat no JNL-NKL-WLBPGG001E27/ Havells decorative model Floretine WL 1LS B22 SS cat no LHFOAJE1TZ1I060 ( Note: Rates incl 01X 7/9 W LED Bulb with each fitting)

S&F sheet metal enclosures with socket plug top and MCBs with a two pin and earth plug and socket complete with one single pole MCB 20 Amps, 240 Volt, 10 KA breaking capacity complete all as specified and directed.

Taking down existing submain wiring of any description and S&F sub main wiring with two single core PVC insulated (FRLS) unsheathed multistranded copper conductor of size 4sqmm nominal cross sectional area and one run of 4sqmm nominal cross sectional area PVC insulated (FRLS) unsheathed multistranded copper conductor green colour as continuous earth wire drawn in and including 25mm dia 'medium grade' PVC concealed conduits (ISI marked) and fittings complete all as specified and directed. NOTE:- One unit length shall measured as two run of main wire and one run of conduit & earth wire.

S&F in repair LED Building security light 24/25 Watt with high power LED source (>110 lumen/watt) PDC housing, IP 65 and IK 07 protection with 4KV inbuilt surge protection potted driver including Electrical connection with PVC three core copper flexible wire & all necessary fixing accessories such as bracket of GI pipe light grade of suitable dia 0.60 mtr long bend to shape as per suitable size along with all accessories, fixed on wall including MS clamp, bolts & nuts. Make : Philips (Green line smart) Cat No BRP042 LED 25 CW R1 S1 PSU GR/ Bajaj Edge nxt LED Cat No. ENXT P 24L WH CR PC SD/ Eveready Mini might Cat No. LED SL025257-02

S&F in repair 30 watt LED flood light fitting warm/ day cool with high power LED complete including Electrical connection with PVC three core copper flexible wire from ceiling rose to fitting terminal, fixing the fitting to wall including all necessary fixing acessories with nut/bolts complete with IP 66 protection complete all as specified and directed. Make Havells JETA Quanto Plus Cat No. JETAQUANTOPLUSSFLP30WLED757SYMLENS, C&S Orion 1.0 Cat No. LTEFI30WHPLED, Philips (ESSENTIAL SMARTBRIGHT FLOOD) Cat No BVP161 LED 30 CW/NW/WW PC WB

S&F RUBY (CLEAR) IP-65 integral post top lantern 1x25/30 Watt LED decorative new generation, post top, energy saving, environmental friendly, long life aesthetically design with symmetric light distribution, spun aluminium landscape luminaire with high power LEDs as light source suitable with fixing the fitting with 50 mm dia GI pipe 'medium grade' 0.5 mtr length including civil work and including Electrical connection with PVC three core copper flexible wire from ceiling rose to fitting terminal,complete all as directed by Engineer -in-charge. Make : Havells or equivalent in CG/Bajaj.

S&Fin repairs bulk head light fitting made from cast aluminium body with heat reistance pressure die cast housing, IP 65 protection cover suitable for bulk head fitting integrated type 7/10 W LED 6000K including in built electronic driver complete including Electrical connection with PVC three core copper flexible wire from ceiling rose to fitting terminal complete all as directed by Engineer -in-charge. Make : Philips Vistaglow ordering code WT140W LED7S CW PSU S1 PC, Havells HEXA 10W IP66 ordering code HEXAFT 10WLED857SSYMBOPC, C&S (Sirius series) ordering code LTB10WLED

Taking down existing ceiling fan, exhaust fan or geyser of any type and capacity and fixing back to location as directed including making all electric connections complete all as specifed and directed.

M/S S S A ASSOCIATES

rajan construction