WELCOME MAINT AND OTHER MISC WORKS UNDER AGE B/R-II OF GE (I) KANPUR

Amount

M&L for Preparation of old decorated surfaces of walls, cornices etc including brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent and trading oil and greasy spots etc and applying one coat of white wash complete all as specified and directed.

M&L for complete removal of existing treatment mechanically with electric paint remover dry wall sander machine including preparation and applying two coat of white/ colour wash complete all as specified and directed.

M&L for Preparation of old decorated surfaces of ceiling, including brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent and trading oil and greasy spots etc and applying one coat of white wash complete all as specified and directed.

M&L for applying a layer white putty, 1mm average thick before applying wall finishes complete all as specified and directed.

M&L for complete removal of existing treatment mechanically with electric paint remover dry wall sander machine and preparation of walls and applying two coat of oil emulsion distemper/acrylic washable distemper over and including a coat of primer over . The paint will be applied through aireless spray techonology with max working pressure of 3300 PSI by Trucare Graco machine / Airless paint sprayer (Vands Engineering solutions) / Airless sprayer machine Surya 9 (Jaguar) / Control Pro 190 Air paint sprayer (Wagner) and capable of operational single spray gun with a maximum materials hose length 150m working, complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc of surfaces & leveling/ edging the disturbed places/edges using necessary filling of wall care putty to obtain smooth regular/ even finish using sand paper and applying one coat of oil emulsion distemper/acrylic washable distemper (of any colour) by using trucare Graco machine / Airless paint sprayer (Vands Engineering solution) / airless sprayer machine surya 9 (Jaguar) / control pro 190 air paint sprayer (wagner) and capable of operational single spray gun with a maximum materials hose length 150m working,, complete all as specified and directed .

M&L for preparation of old painted surfaces of wood and wood based materials of any description not other wise described over 10 cm width or girth and applying one coat of Synthetic Enamel paint (any colour) complete all as specified and directed.

M&L for preparation of old painted surfaces of iron and steel based materials of any description not other wise described over 10 cm width or girth and applying one coat of Synthetic Enamel paint (any colour) complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

Demolition of concrete in ground floors and paving n exc. 15cm thickness incl top finishing if exist at site (below or above ground level) un-reinforced concrete complete all as specified and directed.

M&L for cement concrete Type D2 (1:4:8) (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

M&L for sand filling under floor or in foundation including watering and consolidation complete all as speified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 & ISI Marked of 60 mm thickness M-35 Grade with grey cement and pigment (Red & yellow) complete all as specified and directed.

M&L for cement concrete Type B0 (1:2:4) (using 12.50 mm graded stone aggregate) as in edging portion of paver block for proper matching with existing surface complete all specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in path / plinth protection / sub base finished the surfaces even & fair complete all as specified and directed.

Demolition of reinforced cement concrete of any description in any position not oherwise specifically provided for complete all as specified and directed.

M&L for Nominal mix Type B0 (1:1.5:3) (using 12.5mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors,chajjas, balconies, canopies, deck slabs and in shelves blocks etc and the like complete all as specified and directed.

S&F Formwork to side and soffits of floor and roof beam, beam haunching, girders, bressumers, lintels, cantilevers, shelves including supports, overhang,chajjas etc. also splays between floor and roof beam etc. for flat rough finished surface of concrete complete all as specified and directed.

M&L for Mild steel TMT bars 05 mm dia and over and including 10 mm dia as in stirrups, spacers and binder and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Demolition of brick work or stone/boulders masanory built in cement mortar including all quoins, arches, pillars etc, but excluding ashler facing, dressed stone work and precast concrete articals complete all as specified and as directed.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in built in cement mortar 1:6 complete all as specified and directed.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in built in cement mortar 1:6 (except bricks i.e. by using old bricks after proper cleaning) complete all as specified and directed.

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.

M&L for 25 mm thick PCC Type B-0 1:2:4 (using 12.5 mm graded stone aggregate) as in leveling /sub base of flooring complete all as specified and directed.

M&L for 15mm thick screed bed or bedding layer of cement mortar (1:6) for laying floor finishes complete all as specified and directed.

M&L for 400 x 400 mm Non skid ceramic coloured tiles of approved colour & 7 - 8 mm thick as in floors etc; fixed with spacers (Light weight plastic of 3mm size) and epoxy grouting of joints mixed with pigment to match the shade of tiles over screed bed complete all as specified and directed. Note: Screed bed shall be measured and paid separately under relevant item of BOQ.

M&L for 600 x 600 mm size 8 to 10mm thick polished Vitrified Ceramic tiles of approved colour as in floors etc.fixed with spacers(Light weight plastic of 3mm size) and epoxy grouting of joints mixed with to match with shade of tiles screed bed complete all as specified and directed. Note: Screed bed shall be measured and paid separately under relevant item of BOQ.

All as per item No 28 above but as in skirting & including 10mm thick rendering in CM(1:4) complete all as specified and directed.

M&L first quality coloured glazed ceramic, tiles fixed in pattern of different colour including border of size 300x450x7 mm thick as in vertical surfaces such as dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tiles laid on and including 10 mm thick rendering in cement mortar (1:3), including pointing in white cement with pigment to match the shade of tiles, complete all as specified and directed. Note :- Pattern of the tiles will be decided by GE at the time of execution.

M&L for 14 - 18 mm thick Granite (of approved colour) machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and poilishing complete all as specified and directed.

Taking down cement plaster on wall & ceiling including raking out joint, hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for 15mm thick rendering of brick wall in CM 1:6 finished even & fair on any faces up to ceiling height including required scaffolding etc complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick wall in CM 1:4 finished even & fair with using WPC complete all as specified and directed. Note: (i) WPC shall be measured and paid separately.

M&L for 10 mm thick cement plaster on ceiling in CM 1:3 finished even and smooth without using extra cement including required scaffolding complete all as specified and directed.

M&L for preparation of newly plastered surfaces of ceiling applying two coats of oil bound distemper over and including a coat of primer complete all as specified and directed.

M&L preparation of new surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

M&L for preparation of newly plastered surface of walls and applying two coat of oil emulsion distemper/ acrylic washable distemper over and including a coat of primer. The paint will be applied through aireless spray techonology with max working pressure of 3300 PSI by Trucare Graco machine / Airless paint sprayer (Vands Engineering solutions) / Airless sprayer machine Surya 9 (Jaguar) / Control Pro 190 Air paint sprayer (Wagner) and capable of operational single spray gun with a maximum materials hose length 150m working, complete all as specified and directed.

M&L for preparation of newly plastred surface of walls and applying two coat of exterior weather proof anti algae paint over a coat of primer . The paint will be applied through aireless spray techonology with max working pressure of 3300 PSI by Trucare Graco machine / Airless paint sprayer (Vands Engineering solutions) / Airless sprayer machine Surya 9 (Jaguar) / Control Pro 190 Air paint sprayer (Wagner) and capable of operational single spray gun with a maximum materials hose length 150m working, complete all as specified and directed.

Supplying and Applying, two components acrylic polymer modified cementitious coating on new masonry surfaces devoid of plaster, with Hydrostatic resistance upto 5 bars with forced coverage of 1.75 Kg per Sqm in two coats using roller or brush with a gap of 4 to 6 hrs between the coats. The coats to be applied shall be perpendicular to each other complete all as specified and directed. Note : The Coverage is to be strictly maintained for film formation.

Taking up or down 40 mm dia steel tubing and connection including cleaning for refixing or removal complete all as specified and directed.

S&F GI steel tubing 40 mm bore medium grade galvanised, with all fitting to walls and ceilings or laid in floors complete all as specified and directed.

M&L for cement concrete 1:2:4 Type B0 (using 12.5mm graded stone aggregates), laid in slope towards drainage out spout pipe mixed with waterproofing compound as per manufacturer instructions drainage spouts shall be provided integrally while laying PCC.Fixing of spout shall be done with same PCC as in this item complete all as specified and directed.

M&L for Preparation of plastered floor surface by cleaning surface free from dust and other foreign materials etc. and laying in repair Atatic poly propylene polymer modified membrane pre fabricated 3mm thick with non woven polyester matt central core of 160 gms/Sqm weighing not less than 3.5kg per sqm laid over primer conforming to IS 3384 @ 0.4 lit/sqm by using LPG/Butane torch and applying uniform pressure with a roller with overlap of 100mm in longitudinal direction and 150mm in transverse direction laid as per manufacturers instructions complete all as specified and directed.

M&L PCC 1:5:10 type E-2 (using 40 mm graded stone aggregate) as required complete all as specified and directed.

Taking up or down steel tubing and connections of 15 mm bore including fittings of any type and material complete all as specified and directed.

Taking up or down 20 mm dia steel tubing and connection including removal of fittings of any type and material complete and all as specified and directed.

Cutting chases, pinning in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring. etc. and making good, cutting not exceeding 10cm girth complete all as specified and directed.

S&F GI steel tubing 15mm bore medium grade galvanised, with all fitting and fixed to walls and ceilings or laid in floors complete as specified and directed.

S&F GI steel tubing 20mm bore medium grade galvanised, with all fitting and fixed to walls and ceilings or laid in floors complete as specified and directed.

S&F in repair 15mm bore bib tap long body, fancy type chromium plated screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for brass ferule and fixed complete all as specified and directed. Cat No- HT F3001152 of Cera/ CON -107KN of Jaguar/ K-20073IN-4-CP of KOHLER.

S&F in repair 15mm bore angular stop valve chromium plated screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. Cat No - HT F3001201 OF CERA/ CON-053KN of Jaguar/ K-11568IN-7B-CP of KOHLER.

S&F in repair 15mm bore angle valves fancy type two way chromium plated with long shank and cup screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair three in one system, with provision of both hand shower and overhead shower with 115 mm long bend pipe, connecting legs and wall flench and including maze hand shower 95 x 95 mm square shape single flow (Face plate stainless steel and ABS body in chrome finish) and overhead shower 200x200 mm square shape single flow (ABS body chrome plated with grey face plate) including all necessary arrangements complete all as specified and directed. Cat No- CON-281KN of jaguar/ HT F3001403 OF CERA.

S&F in repair 15 mm bore, brass CP WHB mixer for mixing hot and cold water screwed down for iron pipe complete all as specified. Cat No-HT 3001461 of CERA/ CON-167KNB of Jaguar /K-72275IN-4ND-CP of KOHLER.

S&F in repairs for vitreous china wash basin white flat back size 550x400mm but exclusive taps, chain and plug and porcelain stopper but including cutting for and pinning in ends of brackets or erecting stand, waste pipes, pedestal & brackets complete all as specified and directed.

S&F in repairs15mm bore PVC connection 600mm long heavy duty with brass fly nut and warsher for hot and cold water complete and all as specified and directed.

S&F in repair 10 ltrs capacity low level PVC dual flushing cistern, valveless, syphonic type, white,with inlet,ball float and handle including brackets complete and all as specified and directed.

S&F in repairs WC squatting pan “Orissa Pattern” of size 580 x 440 mm white with integral foot rest (excluding flushing cistern & flush pipe) including connection to trap and to flush pipes etc and lime concrete bedding and including trap set complete all as specified and directed.

S&F in repair vitreous china wash down water closet pedestal pattern white with plastic seat cover (excluding fixing of bolt of flushing cistern and flush pipe) including all fitting complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan cascade type white incl. seat cover and flushing cistern dual action type as per manufacturer instructions with all fittings complete all as specified and directed.

S&F in repair Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed

S&F for 15 mm bore sink mixer chromium plated with swinging spout (wall mounted model) with connecting legs and wall flanges complete all as specified and directed. Cat No-F3001501 Of Cera / CON-319KN of Jaguar/ K-20591IN-4-CP of KOHLER.

S&F Soap dish, chromium plated incl fixing with connected accessories complete all as specified and directed. Cat No- F50141106CH of Cera/ AQN-7731 of Jaguar / K-25068IN-CP of KOHLER.

S&F in repair corner glass shelf chromium plated grills & toughened glass base complete all as specified and directed. Cat No- CAN-1173 of Jaguar/ F5005103 of Cera.

S&F wall mounted towel rack chromium plated 600 mm including fixing with connected accessories complete all as specified and directed. Cat No- AKP-35781PFS of Jaguar/ F5014131CH OF Cera/ K-25066IN-CP of KOHLER.

S&F in looking Mirror 6.00mm thick in decoratied frame, screwing with high quality ss glass fixer / holder sleeves at corners complete all as specified and directed.

S&F in repair Towel ring chromium plated dia not less than 15 cm with mounting brackets complete all as specified and directed. Cat No- F5014105CH of Cera/ AQN-7721 of jaguar/ K-5631IN-CP of KOHLER.

S&F 15 mm dia & 1m long flexible SS braided cord health faucet incl chromium plated wall hook fixed to wall complete all as specified and directed.

S&F in repairs Sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F stainless steel plate rack made out of 1mm thick stainless steel of overall size 750x900mm including fixing with brackets/clamps with screws pattern & design as approved by GE complete all as specified and directed.

Dismantling PVC water tanks and remove to store capacity exc 250 Ltrs and n exc 500 Ltrs complete all as specified and directed.

S&F HDPE triple layer rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 500 litres capacity hoisted and fixed in position including for hoisting into position either inside or outside of building, connecting up pipes, securing access cover etc including float valve, Cover, GI nipple of suitable size complete all as specified and directed.

Dismantling PVC water tanks and remove to store capacity exc 500 Ltrs and n exc 1000 Ltrs complete all as specified and directed.

S&F HDPE triple layer rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 1000 litres capacity hoisted and fixed in position including for hoisting into position either inside or outside of building, connecting up pipes, securing access cover etc including float valve, Cover, GI nipple of suitable size complete all as specified and directed.

S&F in repair 20mm dia Gun metal globe or gate valve with iron wheel head, screwd both ends for iron pipe complete all as specified and directed.

Dismantling of 75 to 100 mm dia CI pipe and S&F fittings jointed in cement mortar fixed to wall or laid in trenches and taking out if required complete all as specified and directed.

Supplied and fixed CI soil waste & vent centrifugally cast spun pipe in any length with or without ears, with cement joints 100 mm bore laid in floor/trenches complete all as specified and directed.

Supplied and fixed CI soil waste & vent centrifugally cast spun pipe in any length with or without ears, with cement joints 100 mm bore laid on walls with MS flat iron clamps with 50x6mm and 16mm dia round bar stay of required shape and size inclduing drilling holes and embedded in CM 1:3 surface finished complete all as specified and directed.

Supplied and fixed CI soil waste & vent centrifugally cast spun pipe in any length with or without ears, with cement joints 75 mm bore laid in floor/trenches complete all as specified and directed.

Supplied and fixed CI soil waste & vent centrifugally cast spun pipe in any length with or without ears, with cement joints 75 mm bore laid on walls with MS flat iron clamps with 50x6mm and 16mm dia round bar stay of required shape and size inclduing drilling holes and embedded in CM 1:3 surface finished complete all as specified and directed.

S&F in repairs cast iron floor trap of 75 mm dia, chromium plated grating including jointing to waste pipe with lead joints and fixed in cement concrete 1:2:4, type B1 (using 12.50 mm graded stone aggregate) complete all as specified and directed.

S&F cast iron branch pieces 100mm bore, single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.

S&F cast iron branch pieces 75mm bore, single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.

S&F 100mm dia CI bend (any radius) with oval access door diminshing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F 75mm dia CI bend (any radius) with oval access door diminshing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F CI vent cowl of size 75mm / 100 mm dia complete all as specified and directed.

S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

S&F in repair PVC (SWR) rain water pipes single socketed in any length with rubber ring joints 110mm bore fixed to walls PVC projected brackets and proper fixing with cement grout on terrace complete all as specified and directed.

S&F PVC (SWR) bends any radius 110 mm bore fixed with rain water pipe complete all as specified and directed.

Taking down chowkhat or frames with shutter (without taking off shutters from the frame) n. exc 1.5 sqm including making good dismantled portion by brickwork, concrete (1:2:4) or CM(1:3) and plastering complete all as specified and directed.

Taking down chowkhat or frames with shutter (without taking off shutters from the frame) exc 1.5 sqm n exc 4 sqm including making good dismantled portion by brickwork,cement concrete (1:2:4) or CM(1:3) and plastering each complete all as specified and directed.

S&F Powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F in repair Powder coated (minimum thickness of powder coating 50 micron) aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. hydraulic door closer complete all as specified and directed.

S&F Powder coated (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (01 Nos) hinge type B-21 100mm long (02 Nos) suitable handle (01 Nos) and tower bolts complete all as specified and directed.

All as per item No. 96 above, but wire gauzed window, complete all as specified and directed.

S&F 5 mm thick tinted glass each panes fixed on aluminium door shutter with and including aluminium beading, rubber gasket etc. complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden /metal frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F in repair 3 mm thick sheet glass panes any size fixed on door/ window shutters with and including beading/ putty/ rubber gasket etc. complete all as specified and directed.

S&F 12 mm thick prelaminated board, exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to aluminium frame work complete all as specified and directed.

S&F in repairs waste pipe for Sink/WHB/Urinal, length exc 0.75m complete all as specified and directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of decorative type/wood grain printed colour of size 50 X 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

All as per item No. 105 above, but size 65 x 125 mm complete all as specified and directed.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid type/ Plain flush door shutter of size 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade),calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moistureproof and fire retardant & fixing with stainless steel butt hinges on door with necessary full body threaded star headed counter sunk S.S screws complete all as specified and directed.

S&F 30 mm thick plain WPC factory made wire mass solid door shutters (conforming as per IS-4020) with density not less than 600 Kg/cum Manufactured by an ISO 9001-2015 certified company. The door to be pannened with SS mosquito mesh and XTN aluminium mesh for additional strength and safety purpose, door should be fixed with SS hinges and SS screw. door should be water proof, termite proof, fire retardant and having screw holding capacity complete all as manufacturer's specification complete all as specified and directed.

S&F stainless steel butt hinges of size 100mm fixed to door shutter with SS screws incl. other necessary acessories complete all as specified and directed.

S&F 200mm stainless steel fancy handle of approved make fixed with SS screws etc. complete all as specified and directed.

S&F 200 mm stainless steel barral tower bolt of extruded section complete all as specified and directed.

S&F 250 mm Stainless steel sliding door bolt with hasp and staple(bolt type) including fixing with necessary accessaries complete all as specified and directed.

S&F 200mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F 75mm long stainless steel door stopper of double legged with rubber shoes in bottom complete all as specified and directed.

M&L for taking down and refixing the door shutter with frame in same opening after Easing of door / window shutters of any size / any number of panels for easy closing / opening tightening of hinges or changing the position of hinges adjustments of tower bolts, sliding bolts etc complete all as specified and directed.

S&F in repair 250 mm Stainless steel sliding door bolt with hasp and staple(bolt type) including fixing with necessary accessories complete all as specified and directed.

S&F in repair 200mm stainless steel handle of approved make fixed with SS screws etc. complete all as specified and directed.

S&F in repair 200 mm stainless steel barral tower bolt of extruded section complete all as specified and directed.

S&F in repair stainless steel butt hinges of size 100mm fixed to door shutter with SS screws incl. other necessary accessories complete all as specified and directed.

S&F framed work such as grills, grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F MS 125mm Butt hinges, heavy weight, cold rolled mild steel into MS frame for caging work etc throgh spot welding complete all as specified and directed.

Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) 3 track sliding Window with mesh shutter - (2-glass shutter and 1-mesh shutter) duly manufactured using UPVC reinforced profiles (Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin) of (108 mm x 45 mm) x 2.20 mm for outer frames, (39 mm x 58 mm) x 2.20mm for sliding shutter frames capable of mounting single glazing system structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.0/1.2 mm prefabricated & welded through fusion welding. The window sash shall be fitted with 5 mm thick clear float glass of reputed make and mesh shutter frame shall be (39 mm x 58 mm) x 2.0 mm fitted with Vinyl Coated Fiber mesh- on rollers/ pulley duly fixed with Grey colour TPV Gasket for sash & Glazing bead shall be co-extruded with Grey colour soft PVC. Window shall be provided with standard hardware & Single point locking system of touch Lock system. the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work. NOTE: Cost of ss wire mesh and 5mm clear glass is deemed to be inclusive in this item.

S&F factory made uPVC white colour casement (Openable) glazed / gauzed window with provn of AC opening as per design approved by engr-in-charge. window to be made of extruded profiles with wall thickness of 2.3mm (+ 0.2mm). Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of'zinc alloyed (white powder coated) and 5mm float glass. NOTE: (i)Cost of ss wire mesh and 5mm clear glass is deemed to be inclusive in this item. (ii) Net opening will be measured for payement purpose.

S&F, stainless steel curtain rods of 25mm dia as in doors/ windows SS brackets fancy type, including screws and other necessary fitting(knob) for fixing brackets SS Funnels for 25 mm dia dropry rods, fixed at each end of rods complete all as specified and directed.

Dismantling of boarding, any descripsion, fixed in any position with nails complete all as specified and directed.

S&F PVC board of thickness 18mm with decorative choice lamination on one side and plain colour on other, having minimum density of 600 gm/cm3,Lead Free,Anti-Bacterial & Anti-Fungal,Termite & Borer Proof & Water Proof including cutting, screwing as in kitchen cabinet, almirah shutter also matching the sawn edges using same colour PVC edge band tape complete all as specified and directed.

M&L 150mm size stainless steel handles of design approved by GE complete all as specified.

S&F of continuous piano hinges brass bright finish or electro galvanished width of flaps when open in 30 mm complete all as specified and directed.

S&F Magnetic catcher heavy duty of approved quality in cupboard / wardrobs including fixing with necessary screws complete all as specified and directed.

S&F Telescopic channels for fixing for SS buckets for modular kitchen complete all as specified and directed.

S&F for Stainless steel tray, bucket and baskets of suitable shape and size for modular kitchen complete all as specified and directed.

M&L for preparation of new steel or iron surfaces of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over and including a coat zink chrome red oxide primer complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M&L Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 410 W (Gde-E-250) quality A complete all as specified and directed.

Dismantling of asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

S&F of Pre- painted galvalume aluminum zinc coating GI based profile sheet TCT with gsm -150 sheet 0.50mm thick of any colour total mass coating 150gms/sqm (both side) and having tensile strength of 550 Mpa as in roof covering/cladding to wall/window chajja, fixed with self tapping screws complete all as specified and directed.

Note for item Nos 1, 2, 4, 5, 6, 34, 39, 40, 41, 99 & 100:- Rate quoted by the contractor shall be deemed to including scaffolding upto G+2 height and safety measures.

U.R ASSOCIATES (BID ID -3325469)

m/s sahu enterprises (BID ID -3333299)