GE(S) BTD TOKEN NO 56 OF 2022-23 CERTAIN BR REPAIR TO ROOFING PLUMBING JOINERY FLOORING AND ALLIED WORKS TO BLDG NO P 1151 (7010 EME) P 209 (25 SIKH) AND P 218 (20 GARH) OTM ACCN AND CERTAIN OTHER BLDGS OF SECTOR III UNDER AGE BR II GE (S) BATHINDA A

Amount

Taking Down Chowkhats or Frame with Shutter ( with out taking out shutter from the frame ) exc 1.50 sqm not exceeding 4.0 sqm each as doors , windows & ventilators etc and removal from site complete all as specified and directed.

Taking Down Chowkhats or Frame with Shutter ( with out taking out shutter from the frame ) not exceeding 1.50 sqm each as doors , windows aaa& ventilators etc and removal from site complete all as specified and directed.

Demolition of cement concrete (un reinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed.

Supply only Integral water proofing Compound complete all as specified and directed.

Water proofing treatment to sunken slab and adjoining vertical surfaces as specified under:- (a) M&L rendering 10 mm thick in cement plaster (1:3) using coarse sand mixed with integral water proofing compound as per manufacturer's instruction trowel even and smooth with steel trowel on sunken surfaces (Note : WPC shall be measured and paid separately) (b) Applying first coat of chemical pidifin 2K(Dr Fixit) on cleared RCC surfaces @ 0.86 Kg/Sqm (Minimum) as recommended by manufacturer. (c) Provide a layer glass fibre mesh of size 2.25mm x2.25mm (45 GSM) over first coat of chemical Pidifin 2K as per manufacturers recommendation. (d) Applying second coat of chemical Pidifin 2K (Dr Fixit) @ 0.86 Kg/Sqm (minimum) layer glass fibre mesh of size 2.25mm x 2.25mm (45 GSM) as recommended by manufacturers.

M&L for PCC 1:5:10 type E-2 as in filling of sunken floors etc complete all as specified and directed.

S&F Solid PVC Door Frame of Size 50 mm X 47 mm made out of 5 mm pre laminated colour PVC Sheet reinforced with MS Squaretube , suppling and fixing in opening as per specification & drawing complete all as specified and directed.

S&F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail;Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F 100 mm long aluminium anodised butt hinges with galvanised mild steel screws complete all as specified and directed.

S&F 125 mm long aluminum anodised tower bolts complete all as specified and directed.

S&F 125mm long aluminum anodised handles , cast type anodised complete all as specified and directed.

S&F pressed steel frames of size 105x60 mm for doors with one or more rebates incl necessary fixing lugs , hinges , lock strike plate etc ( thickness of sheet shall be 1.25 mm) and making good the wall with plaster in CM 1:6 complete all as specified and directed.

M&L PCC 1:3:6 type C-1 using 20mm graded stone aggreegates for filling in bed block of hold fast etc complete all as specified and as directed

S&F 35 mm thick Flush shutters solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 300mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S&F 200mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and directed.

S & F 150 mm mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed.

S & F Aluminium powder coated ventilator including provision of neccessary rubber gasket for fixing glass panes etc complete all as shown in drawing No CEBT/SK-936 sheet 1/1 complete all as specified and directed. Note: Glass panes and wiremesh shall be measured and paid seperately under respectively Items of BoQ.

S & F 3 mm thick figured glass, pin head type and glazing with oil putty in ventilator complete all as specified and directed.

M & L two coats of synthetic enamel paint over a coat of pink primer for painting to new wood and wood based surfaces of any description, over 10 cm in width or girth, not otherwise described with including preparation of surfaces complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish to a distance exceeding 1 km but not exceeding 2 km complete all as specified and directed.

M&L non skid coloured ceramic tiles 7 to 8 mm thick ( square / rectangulr) area of each tile exc 0.11 n exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed in CM (1:6) complete all as specified and directed.

S&F glazed ceramic coloured tiles 450 x 350mm, 7 to 8mm thick in verticle surfaces such as dado / skirting, set and jointed in neat cement slurry and pointed in white or coloured cement pigmented to the match the shade of tiles laid over and including 10 mm thick rendering in cement mortar (1:4) as backing coat and finish the surface rough to receive the tile complete all as specified and directed.

M&L for marble work (Udaipur green slabs) in one piece 15 to 18 mm thick slab of cills of windows and urinal partition and like in laid over and including M&L for 15 mm thick cement mortar (1:4) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade and roundening to the edge of stone slabs on edges etc. complete all as specified and directed.

Supply and fixing 15mm bore chromium plated, fancy type, Pillar cock screwed down high pressure, with or without lettered Hot ot Cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.

S & F in repairs, CP basin mixture single lever type and fixed complete all as specified and directed.

S&F in repairs PVC connection 15 mm bore dia and 600 mm long complete all as specified and directed.

S&F in repairs 15 mm bore dia, stop valves, chromium plated angular type, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and directed.

S & F in repairs brass chromium plated shower rose 125 mm size with or without swivel joints fixed to steel pipe or union complete all as specified and as directed.

S & F in repairs 15 mm bore dia, stop valves, cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F brass chromium plated tubular towel rail 60 cm long complete all as specified and directed.

S&F in repairs brass chromium plated soap tray 100x100x0.6 mm soap tray complete all as specified and directed.

S&F in repairs 15 mm bore chromium plated long body with wall flanges fancy type, bib taps, cast copper alloy with crutch or butterfly handle, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F CP grating Doom 125 mm dia with aste hole complete all as specified and directed.

Taking down exsiting 15 mm bore pipe of any description complete all as specified and directed.

Taking down exsiting 25 mm bore pipe of an description complete all as specified and directed.

M & L for 15 mm bore GI pipe, medium grade, ISI marked, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

M & L for 25 mm bore GI pipe, medium grade, ISI marked, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F in repairs white vitreous china wash down water closet pan (pedastal pattern) with and including plastic water closet seat white black , closed pattern with flat bottom and cover and mild steel chromium plated or aluminum hinging device incl flush pipe and fixing bolts ( excluding flushing cistern) etc complete all as specified and directed

S&F in repairs vitreous china squatting pan, 'Orissa' pattern, size 580mm x 440mm, white, with integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. including making good to floor and excluding flushing cistern, flush pipe and waste pipe complete all as specified and directed.

S & F in repairs 10 litres capacity, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and PVC flushing pipe 32mm dia 900 mm long complete all as specified and directed.

S & F in repairs vitreous china, countertop oval shaped wash hand basin, white, of size 560mm x 450mm , including 32 mm dia brass chromium plated waste coupling and PVC waste pipe including angle iron brackets complete all as directed complete all as specified and directed.

S&F Vitrous china urinal half stall type white ( excluding flushing cistern, flush pipe and waste pipe ) including connections to flushing pipe and out going pipes etc complete all as specified and directed

Dismentalling and disconnecting of existing CI soil vent pipe 100 mm bore fixed to wall , laid in trenches incl all fittings and accessories complete all as specified and directed.

Dismentalling and disconnecting of existing CI soil vent pipe 75 mm bore fixed to wall , laid in trenches incl all fittings and accessories complete all as specified and directed.

S & F 100 mm bore cast iron (spun) soil, waste and vent pipes, ISI marked in any length with or without ears, with cement joints, fixed to walls with and including suitable size clamps / laid in trenches complete all as specified and directed.

S & F 75 mm bore cast iron (spun) soil, waste and vent pipes, ISI marked in any length with or without ears, with cement joints, fixed to walls with and including suitable size clamps / laid in trenches complete all as specified and directed.

S & F 100 mm bore cast iron bends (any radius), diminishing pieces or tapers (large bore measured) with oval access door complete all as specified and directed.

S & F 75 mm bore cast iron bends (any radius), diminishing pieces or tapers (large bore measured) with oval access door complete all as specified and directed.

S&F 75 mm dia CI floor trap with grating incluing jointing to waste pipe fixed in cement concrete (1:2:4) type B-1, complete all as specified and directed.

S & F 100 mm dia cast iron branch pieces, single (equal or un-equal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door complete all as specified and directed.

S & F 75 mm dia cast iron branch pieces, single (equal or un-equal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door complete all as specified and directed.

S&F 100 mm bore CI cowl complete all as specified and directed

M&L for in repair 100 mm dia of CI P trap long with grating incl jointing to waste pipe fixed in cement mortar 1:2:4 type B-1 complete all as specified and directed.

Taking down old cement plaster including raking out joints hacking for key scrubbing down with water etc and removing rubbish from the premises to a distance exceeding 1 km but not exceeding 2 km etc complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar (1:6) on internal wall surfaces of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar (1:4) on external wall surfaces of brick work or concrete surfaces even and fair without using extra cement mixed with liquid water proofing material as per manufacturer's instruction complete all as specified.(Liquid water proofing material shall be measured and paid for separately.) complete all as specified and directed.

M&L for rendering 10 mm thick in cement mortar in (1:3) finishing the surfaces even and smooth on ceiling complete all as specified and directed.

S&F 32/40 mm dia pvc waste pipe and urinal pipe including CP grating with waste hole complete all as specified and directed.

Dismentalling water tanks of exc 500 ltrs and n exc 1000 ltrs capacity water storage tanks remove from site complete all as specified and directed.

S&F 1000 litres capacity Rotational moulded polyethylene in white colour, three layered, water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

S&F 25 mm bore ball valves high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe of (minimum weight 210 gram) complete all as specified and directed.

S & F 20 mm bore Gun metal globe or Gate valve, with iron wheel , screwed both ends for iron pipe or for unions complete all as specified and directed.

M&L applying two coat of white wash over new plastered surfaces of wall including preparation etc complete all as specified and directed.

M&L preparation of newly plastered or unplastered surface and applying three coats of white wash on ceiling complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint of approved tint complete all as specified and directed.

Complete removal of exsiting treatment and preparation of surface applying two coat of white wash over old plastered surfaces of wall etc complete all as specified and directed.

Complete removal of exsiting treatment and preparation of old plastered or unplastered surface and applying three coats of white wash on ceiling complete all as specified and directed.

Complete removal of exsiting treatment and preparation of old plastered or unplastered surface and applying two coats of cement base paint of approved tint complete all as specified and directed.

S & F CP health faucet 15 mm bore including 1 Mtr flexible led complete all as specified and directed.

S & F stainless steel fancy type peg set of six and fixed in position with steel screws complete all as specified and directed.

S & F 20 mm thick granite slabs for wash hand basin over 15 mm thick screed bed in CM 1:6 including moulding and nosing of corners/ edges complete all as specified and directed,

Material and Labour for providing precast cement concrete (1:2:4) type B1 using 20mm graded stone aggregate in cooking plateform/slab including necessary formwork and setting in mortar set in cement mortar (1:4) complete all as specified and as directed.

M & Lfor half brick work with sub-class 'B' bricks, straight or curved on plan exc 6m mean radius built in In cement mortar 1:4 complete all as specified and directed.

M&L for TMT bars 10 mm dia and over cut to length and bent to shape required including cranking, hooking ends and binding with and MS wire not less than 0.9 mm dia or securing with clips complete all as specified and directed.

S & F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

Supply and fixing powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed .

Supply and fixing powder coated Anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing,handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed .

S&F 12 mm prelaminated particle board, interior grade, prelaminated both sides with decorative choice laminations complete all as specified and directed.

S & F 5.50mm thick sheet glass ordinary quality and glazing with beads fixed with metal pins complete all as specified and directed.

S&F 10mm size moritice lock of brass, vertival type, 4 levers, complete all as specified and directed.

S&F Udaipur green marble slab 18-20mm thick as in corner shelf of 300mm radius including cutting 30mm groves in wall and jointed & pointed with cement slurry mixed with pigment to match with marble and rounding of edges complete all as specified and directed.

Taking down shutters any description exc 1 Sqm but n.exc 2 sqm each, and refixing in the same opening including easening and adjusting complete all as specified and directed.

Taking down shutters any description exc 2 sqm each, and refixing in the same opening including easening and adjusting complete all as specified and directed.

Dismantling timber scantlings in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete all as specified and directed.

Dismentalling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.

S&F Pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M & L for rendering 15mm thick CM 1:4 mixing with WPC @ 200 ml/bag of cement on fair faces of concrete/brick tile surfaces on roof slab after wire brushing and cleaning top surface complete all as specified and directed. (Note-: WPC shall be measured and paid seperatly under respective item)

M&L for cleaning of Roof wall concrete surfaces & applied a coat of cold bituminous primer over cleaned surface @ 0.30 Kg/Sqm followed by APP modified five layer polymeric membrane 3mm thick, minimum wt 3.6 kg/Sqm reinforced with polyester non-woven fabric (weighing not less than 150 gms/Sqm) manufactured by M/S STP Ltd india Ltd/ M/S IWL india Ltd or its equivalent laid as per the manufactures instruction with side over lap of 75mm & end over lap of 100mm & tucked into the chases on vertical surfaces if required & finally finished with bituminous aluminum paint @ 0.10 Kg/Sqm complete all as specified and as directed

M & L PCC 1:2:4 for PCC type B-1 using 20 mm graded stone aggregate as in coping steps bed blocks etc complete all as specified and as directed

Supply and fixing 2nd class HW 35mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9mm thick B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (Part I) kiln seasoned and chemically pressure treated complete all as specified and directed.

Supply and fixing 2nd class HW 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauge, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass, gauze, etc.; sizes of members of shutters as specified in SSR Part I Section 8, Clause 8.24 (a) complete all as specified and directed.

Material and Labour for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide or zinc chrome complete all as specified and directed.

Note:- All debris obtained from dismintling, demolition and taking down (Exept credited to contractor) shall be desposed off out side MOD land and charges, if any, as incurred in civil area as per their regulator shall be deemed to be including in quoted rates. No extra claim on this account shall be admissble.

Note:- Net contract sum shall be calculated after deduction of Sch of credit.

FAQIR CHAND

M/S BHAGWATI CONSTRUCTION COMPANY

ABHINANDAN ENTERPRISES

SHARDA ENTERPRIES

M/s Kamal Constructions

M/S VIAJY BUILDERS & DEVELOPERS

M/s MITTAL CONSTRUCTIONS

RAMA AUTOS