Construction of district science center park planetarium at Bolangir district, Odisha

BILL OF QUANTITY

Name of Work: Construction of district science centre / park & planetarium at Bolangir district, Odisha

NIT No- NBCC/SBG (O)/BBSR/DST-Bolangir/ 2021 / 018, Dated: 31.08.2021

MASTER SUMMARY SHEET OF ALL WORKS

S. NO. DESCRIPTION MAIN SCIENCE PLANETARIUM. SITE WORKS.

1 BUILDING CIVIL WORKS. 29862689.05 37177930.33

2 SITE DEVELOPMENT WORK. 5619025.19

3 BOUNDARY WALL, ENTRY GATE WORKS. 10238064.16

4 SEPTIC TANK & SOAK PIT WORKS 593600.00

5 BOREWELL WORKS 389898.06

6 HORTICULTURE & LANDSCAPING WORKS. 1340241.50

7 UNDER GROUND WATER TANK 3700453.14

8 IRRIGATION WATER WORKS 1276366.53

9 BUILDING PHE WORKS 1090953.38 1264943.56

10 SITE PHE WORKS 4429817.45

11 BUILDING ELECTRICAL WORKS 1365649.79 2657273.55

12 FIRE SUPPRESSION WORKS 654040.84 3231457.86

14 EXTERNAL ELECTRICAL WORKS 1433026.76

15 EXTERNAL ELECTRICAL WORKS-- 2870716.48

SUB STATIONS AND DG SET

16 SITE EARTHFILLIING 1794026.09

17 INTERNAL EXHIBITS 8762880.00

18 EXTERNAL EXHIBITS 4912936.92

20 SECURITY SYSTEM WORKS 300585.60

21 INTERNAL FURNITURE & FURNISHING 554400.00 1590064.00

22 DOME PROJECTION SYSTEM 62608000.00

BIBHU DUTTA Digitally signed by

BIBHU DUTTA MISHRA

MISHRA Date: 2021.08.31

NAME OF WORK- Construction of district science centre / park & planetarium at Bolangir district, Odisha

SOR 2017/ M.R. ITEMS

S.No. DESCRIPTION UNIT QTY. RATE SOR AMOUNT

M.R. ITEMS AMOUNT

BUILDING CIVIL WORKS ESTIMATE

SH: EARTH WORKS

A) Earth work in all kind of soil(Ordinary soil,Hard soil,& Stoney

earth) with initial lead and lift including rough dressing in layers not

1 E.W-1 exceeding 0.3m in depth and the Earth transported by transport Cum 1479.51 227.67 336840.04

vehicles as directed by the Engineer-in-charge.

Cutting in disintegrated rock not requiring blasting to be removed by

pick axes and crow barsand depositing materials within 50m lead and

1.5m initial lift inluding rough dressing as per direction and

specification of the departement stacking useful materials separately

Extra lift or 1.5m or part there of over the initial lift of 1.5m in all kinds

E.W-5 of embankments and road works and ordinary earth work in general.

E.W-5A All kinds of soil

E.W-5B Ordinary or hard rock

Filling available excavated earth (excluding rock) in trenches,

plinth,sides of foundations etc. in layers not exceeding 20cm in

depth,consolidating each deposited layer by ramming and watering,

lead upto 50 m and lift upto 1.5 mincluding cost and conveyance of

all materials, water to work site, excluding seigniorage charges and

all operational, incidental, labour charges, etc. complete for finished

Filling in foundation and plinth with filling sand, watered and

rammed. including cost and conveyance of all materials, water to

8 E.W-7 work site, excluding seigniorage charges and all operational, Cum 226.57 379.85 86062.61

incidental, labour charges, etc. complete for finished item of work

Diluting and injecting chemical emulsion for POST-

E.W-10 CONSTRUCTIONAL anti-termite treatment (including the cost of

chemical emulsion) :

Along the external wall below concrete or masonry apron using

chemical emulsion @ 2.25 litres per linear metre including drilling

and plugging holes etc.: With Chlorpyriphosl Lindane E.C. 20% with

9 E.W-10b 1% concentration including all operational, incidental, labour metre 212.88 38.33 8159.69

charges, etc., complete for finished item of work.(Location:-Building

Periphery wall)

Treatment of soil under existing floors using chemical emulsion @

one litre per hole, 300 mm apart including drilling 12 mm diameter

holes and plugging with cement mortar 1:2 (1 cement : 2 coarse

sand) to match the existing floor: With Chlorpyriphos/Lindane E.C.

20% with 1 % concentration including all operational, incidental,

labour charges, etc., complete for finished item of work. (Location;-

Treatment at points of contact of wood work by chemical emulsion

Chlorpyriphos / Lindane (in oil or kerosene based solution) @ 0.5

litres per hole by drilling 6mm dia holes at downward angle of 45

11 E.W-10d degree at 150 mm centre to centre and sealing the same including all Rmt 130.40 264.39 34476.46

operational, incidental, labour charges, etc., complete for finished

item of work. (Location:-Door Frame Alround areas.)

Providing, laying, spreading and compacting graded stone aggregate

(size range 53 mm to 0.075 mm ) to wet mix macadam (WMM)

specification including premixing the material with water at OMC in

for all leads & lifts, laying in uniform layers with mechanical paver

finisher in sub- base / base course on well prepared surface and

compacting with suitable means to achieve the desired density,

complete as per specifications and directions of Engineer-in-Charge.

SH: CONCRETE WORKS

SOR 2017/ M.R. ITEMS

S.No. DESCRIPTION UNIT QTY. RATE SOR AMOUNT

M.R. ITEMS AMOUNT

Providing and laying in position cement concrete of specified

gradeexcluding the cost of centering and shuttering - All work up to

1:3:6 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40mm

13 C.W-1a Below of Brick foundation Cum 54.15 5408.65 292878.40

Providing and laying in position cement concrete of specified grade

excluding the cost of centering and shuttering - All work up to plinth

1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40mm

For Footings,Center raft&Retaining wall raft-(Below Ground Level)

Providing and laying damp-proof course 40mm thick with cement

15 M.R. concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone sqm 209.24 406.19 84991.20

aggregate 12.5mm nominal size)

Extra for providing and mixing water proofing material in cement

16 M.R. concrete work in doses by weight of cement as per manufacturer's 46.88 49.08 2300.87

Providing & applying a coat of residual petroleum bitumen of grade

of VG-10 of approved quality using 1.7kg per square metre on damp

17 M.R. proof course after cleaning the surface with brushes and finally with sqm 210.00 89.73 18843.30

apiece of cloth lightly soaked in kerosene oil.

Providing and laying in position ready mixed plain cement concrete,

with cement content as per approved design mix and manufactured

in fully automatic batching plant and transported to site of work in

transit mixer for all leads, having continuous agitated mixer,

manufactured as per mix design of specified grade for plain cement

concrete work, including pumping of R.M.C. from transit mixer to site

of laying and curing, excluding the cost of centering, shuttering and

finishing, including cost of curing, admixtures in recommended

proportions as per IS : 9103 to accelerate/ retard setting of concrete,

improve workability without impairing strength and durability as per

direction of the Engineerin- charge.

Note : 1) Excess/less cement used than specified in this item is

payable/recoverable separately.

All works upto plinth level :

M-15 grade plain cement concrete (cement content considered @ 240

SH: REINFORCED CEMENT CONCRETE WORK

Reinforced cement concrete work in beams, suspended floors, roofs

having slope up to 15° landings, balconies, shelves, chajjas, lintels,

bands, plain window sills, staircases and spiral stair cases above

plinth level up to floor five level, excluding the cost of centering,

shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5

coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).

Centering and shuttering including strutting, propping etc. and

removal of form for :

Foundations, footings, bases of columns, etc. for mass concrete

Walls (any thickness) including attached pilasters, butteresses, plinth

and string courses etc.

Suspended floors, roofs, landings, balconies and access platform

23 M.R. Shelves (Cast in situ) Sqm 3.11 466.12 1449.63

Lintels, beams, plinth beams, girders, bressumers and cantilevers

25 M.R. Columns, Pillars, Piers, Abutments, Posts and Struts Sqm 888.47 491.20 436416.46

26 M.R. Stairs, (excluding landings) except spiral-staircases sqm 21.44 436.53 9359.20

Extra for shuttering in circular work (20% of respective centering and

shuttering items)

Steel reinforcement for R.C.C. work including straightening, cutting,

bending, placing in position and binding all complete upto plinth

Thermo-Mechanically Treated bars of grade Fe-500D or more.

SOR 2017/ M.R. ITEMS

S.No. DESCRIPTION UNIT QTY. RATE SOR AMOUNT

M.R. ITEMS AMOUNT

Steel reinforcement for R.C.C. work including straightening, cutting,

bending, placing in position and binding all complete above plinth

Thermo-Mechanically Treated bars of grade Fe-500D or more.

Add for plaster drip course/ groove in plastered surface or moulding

to R.C.C. projections.

Providing and laying in position machine batched and machine mixed

design mix M-25 grade cement concrete for reinforced cement

concrete work, using cement content as per approved design mix,

including pumping of concrete to site of laying but excluding the cost

of centering, shuttering, finishing and reinforcement, including

admixtures in recommended proportions as per IS: 9103 to

accelerate, retard setting of concrete, improve workability without

impairing strength and durability as per direction of Engineer-in-

(Note :- Cement content considered in this item is @ 330 kg/cum.

Excess/ less cement used as per design mix is payable/recoverable

31 M.R. All works upto plinth level Cum 358.35 5982.29 2143753.62

32 M.R. All works above plinth level upto floor V level Cum 423.78 6747.22 2859336.89

Brick work with fly ash bricks of 25cmx12cmx8cm size having

crushing strength not less than 75kg/cm2 in foundation and plinth in:

33 M.R. Cement mortar 1:6 (1 cement : 6 coarse sand) cum 86.24 4525.05 390240.31

Brick work with fly ash bricks of 25cmx12cmx8cm size having

crushing strength not less than 75kg/cm2 in superstructure above

plinth level up to floor V level in all shapes and sizes in :

34 M.R. Cement mortar 1:6 (1 cement : 6 coarse sand) cum 2.91 4825.72 14042.85

Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars

at every third course of half brick masonry.

Brick work with fly ash bricks of 25cmx12cmx8cm size having

crushing strength not less than 75kg/cm2 with dimensional tolerance

+-2% compressive strength in super structure above plinth level up to

floor V level in :

Cement mortar 1:6 (1 cement : 6 Coarse sand)

38 M.R. Terrace Level Cum 50.28 5449.29 273990.30

Half brick masonry with non modular fly ash bricks of class

designation 10, conforming to IS : 12894, in super structure above

plinth and upto floor V level.

Cement mortar 1 : 4 (1 cement : 4 coarse sand)

SH: MARBLE & GRANITE WORK

Marble work gang saw cut (polished and machine cut) of thickness

18 mm for wall lining (veneer work), backing filled with a grout of

average 12 mm thick in cement mortar 1:3 (1 cement : 3 coarse sand),

including pointing with white cement mortar 1:2 (1 white cement : 2

marble dust) with an admixture of pigment to match the marble shade

(To be secured to the backing by means of cramps, which shall be

paid for separately)

Raj Nagar Plain white marble/ Udaipur green marble/ Zebra

41 M.R. Area of slab over 0.50 sqm sqm 20.43 3096.45 63260.47

Providing and fixing 18 mm thick gang saw cut, mirror polished,

premoulded and prepolished, machine cut for kitchen platforms,

vanity counters, window sills, facias and similar locations of required

size, approved shade, colour and texture laid over 20 mm thick base

cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with

white cement, mixed with matching pigment, epoxy touch ups,

including rubbing, curing, moulding and polishing to edges to give

high gloss finish etc. complete at all levels.

Granite of any colour and shade

42 M.R. Area of slab over 0.50 Sqm. Sqm. 3.11 3293.08 10241.48

SOR 2017/ M.R. ITEMS

S.No. DESCRIPTION UNIT QTY. RATE SOR AMOUNT

M.R. ITEMS AMOUNT

Providing edge moulding to 18 mm thick marble stone counters,

Vanities etc., including machine polishing to edge to give high gloss

finish etc. complete as per design approved by Engineer-in-Charge.

43 M.R. Granite work metre 5.18 251.76 1304.12

Extra for fixing marble /granite stone, over and above corresponding

basic item, in facia and drops of width upto 150 mm with epoxy resin

based adhesive, including cleaning etc. complete.

Extra for providing opening of required size & shape for wash basin/

kitchen sink in kitchen platform, vanity counter and similar location

45 M.R. in marble/ Granite/ stone work, including necessary holes for pillar each 2.00 446.42 892.84

taps etc. including moulding, rubbing and polishing of cut edges etc.

Stone tile (polished) work for wall lining over 12 mm thick bed of

cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @

3.3 kg/sqm including pointing in white cement complete.

46 M.R. Granite of any colour and shade. Sqm 3.10 2504.63 7764.00

Providing and fixing stone slab with table rubbed, edges rounded

and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal

partitions by cutting a chase of appropriate width with chase cutter

and embedding the stone in the chase with epoxy grout or with

cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone

aggregate 6 mm nominal size) as per direction of Engineer-in-charge

and finished smooth.

47 M.R. Granite stone of approved shade sqm 1.13 3230.71 3650.70

Stone work (machine cut edges) for wall lining etc. (veneer work)

upto 10 metre height, backing filled with a grout of average 12 mm

thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing

in white cement mortar 1:2 (1 white cement : 2 stone dust) with an

admixture of pigment matching the stone shade : (To be secured to

the backing and the sides by means of cramps and pins which shall

be paid for separately) :

a) Red sand stone - exposed face fine dressed with rough backing.

Designing, fabricating, testing, installing and fixing in position

Curtain Wall with Aluminium Composite Panel Cladding, with open

grooves for linear as well as curvilinear portions of the building , for

all heights and all levels etc. including:

(a) Structural analysis & design and preparation of shop drawings for

pressure equalisation or rain screen principle as required, proper

drainage of water to make it watertight including checking of all the

structural and functional design.

(b) Providing, fabricating and supplying and fixing panels of

aluminium composite panel cladding in pan shape in metalic colour

of approved shades made out of 4mm thick aluminium composite

panel material consisting of 3mm thick FR grade mineral core

sandwiched between two Aluminium sheets (each 0.5mm thick). The

aluminium composite panel cladding sheet shall be coil coated, with

Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating

of approved colour and shade on face # 1 and polymer (Service)

coating on face # 2 as specified using stainless steel screws, nuts,

bolts, washers, cleats, weather silicone sealant, backer rods etc.

SOR 2017/ M.R. ITEMS

S.No. DESCRIPTION UNIT QTY. RATE SOR AMOUNT

M.R. ITEMS AMOUNT

(c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot

Dip Galvanised with serrations and serrated washers to arrest the

wind load movement, fasteners, SS 316 Pins and anchor bolts of

approved make in SS 316, Nylon separators to prevent bi-metallic

contacts all complete required to perform as per specification and

drawing The item includes cost of all material & labour component,

the cost of all mock ups at site, cost of all samples of the individual

components for testing in an approved laboratory, field tests on the

assembled working curtain wall with aluminium composite panel

cladding, cleaning and protection of the curtain wall with aluminium

composite panel cladding till the handing over of the building for

occupation. Base frame work for ACP cladding is payable under the

relevant aluminium item.s The Contractor shall provide curtain wall

with aluminium composite panel cladding, having all the

performance characteristics all complete , as per the Architectural

drawings, as per item description, as specified, as per the approved

shop drawings and as directed by the Engineer-in-Charge. However,

for the purpose of payment, only the actual area on the external face

49 M.R. of the curtain wall with Aluminum Composite Panel Cladding sqm 35.00 4105.48 143692.00

(including width of groove) shall be measured in sqm. up to two

decimal places.

SH: WOOD & PVC WORK/JOINERY

Providing wood work in frames of doors, windows, clerestory

windows and other frames, wrought framed and fixed in position with

M.R. hold fast lugs or with dash fasteners of required dia & length (hold

fast lugs or dash fastener shall be paid for separately).

50 Second class teak wood cum 1.05 100151.78 105159.37

Providing and fixing panelled or panelled and glazed shutters for

doors, windows and clerestory windows fixing with butt hinges of

required size with necessary screws, excluding panelling which will

be paid for separately, all complete as per direction of Engineer-in-

charge. (Note:- Butt hinges and necessary screws shall be paid

Second class teak wood

51 35 mm thick shutters sqm 17.28 2745.50 47442.24

Providing and fixing panelling or panelling and glazing in panelled or

panelled and glazed shutters for doors, windows and clerestory

windows (Area of opening for panel inserts excluding portion inside

M.R. grooves or rebates to be measured). Panelling for panelled or

panelled and glazed shutters 25 mm to 40 mm thick :

Particle Board 12 mm thick

Plain particle board flat pressed, 3 layer or graded wood particle

board medium density Grade I, IS : 3087 marked

M.R. Float glass panes

5.0 mm thick glass panes (weight not less than 12.5 kg per sqm)

Providing and fixing ISI marked flush door shutters conforming to IS

: 2202 (Part I) non-decorative type, core of block board construction

with frame of 1st class hard wood and well matched commercial 3 ply

veneering with vertical grains or cross bands and face veneers on

both faces of shutters:

35 mm thick including ISI marked Stainless Steel butt hinges with

necessary screws

Extra for providing lipping with 2nd class teak wood battens 25 mm

55 M.R. minimum depth on all edges of flush door shutters (over all area of sqm 66.90 416.64 27873.00

door shutter to be measured).

Extra for cutting rebate in flush door shutters (Total area of the

shutter to be measured).

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to

frame with 10 mm diameter bolts, nuts and wooden plugs and

57 M.R. embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 each 132 591.71 78106.00

cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal

SOR 2017/ M.R. ITEMS

S.No. DESCRIPTION UNIT QTY. RATE SOR AMOUNT

M.R. ITEMS AMOUNT

Providing and fixing aluminium extruded section body tubular type

universal hydraulic door closer (having brand logo with ISi, IS : 3564,

embossed on the body, door weight upto 36 kg to 80 kg and door

width from 701 mm to 1000 mm), with double speed adjustment with

necessary accessories and screws etc. complete.

Providing and fixing aluminium hanging floor door stopper ISI

marked anodised (anodic coating not less than grade AC 10 as per IS

: 1868) transparent or dyed to required colour and shade with

necessary screws etc. complete.

59 M.R. Twin rubber stopper each 19.00 64.76 1230.44

Providing and fixing factory made P.V.C. door frame of size 50x47

mm with awall thickness of 5 mm, made out of extruded 5mm rigid

PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm

long brackets of 15x15 mm M.S. square tube, the vertical door frame

profiles to be reinforced with 19x19 mm M.S. square tube of 19

60 M.R. gauge, EPDM rubber gasket weather seal to be provided through out metre 19.80 364.06 7208.39

the frame. The door frame to be fixed to the wall using M.S. screws of

65/100 mm size, complete as per manufacturer’s specification and

direction of Engineerin- Charge.

Providing and fixing factory made panel PVC door shutter consisting

of frame made out of M.S. tubes of 19 gauge thickness and size of 19

mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S.

frame shall have a coat of steel primers of approved make and

manufacture. M.S. frame covered with 5 mm thick heat moulded PVC

'C' channel of size 30 mm thickness, 70 mm width out of which 50

mm shall be flat and 20 mm shall be tapered in 45 degree angle on

both side forming styles and 5 mm thick, 95 mm wide PVC sheet out

of which 75mm shall be flat and 20 mm shall be tapered in 45 degree

on the inner side to form top and bottom rail and 115 mm wide PVC

sheet out of which 75 mm shall be flat and 20 mm shall be tapered on

both sides to form lock rail. Top, bottom and lock rails shall be

provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide

cross PVC sheet be provided as gap insert for top rail & bottom rail,

paneling of 5 mm thick both side PVC sheet to be fitted in the M.S.

frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm)

thick x 15 mm wide PVC sheet beading on inner side, and joined

together with solvent cement adhesive. An additional 5 mm thick PVC

strip of 20 mm width is to be stuck on the interior side of the 'C'

Channel using PVC solvent adhesive etc. complete as per direction of

Engineer-in-charge, manufacturer's specification & drawing.

61 M.R. 30 mm thick plain PVC door shutters sqm 6.30 2231.52 14059.00

Providing and fixing stainless steel ( Grade 304) railing made of

Hollowtubes, channels, plates etc., including welding, grinding,

buffing, polishing and making curvature (wherever required) and

fitting the same with necessary stainless steel nuts and bolts

complete, i/c fixing the railing with necessary accessories & stainless

steel dash fasteners , stainlesssteel bolts etc., of required size, on the

top of the floor or the side of waist slab with suitable arrangement as

per approval of Engineer-in-charge,( for payment purpose only

weight of stainless steel members shall be considered excluding

fixing accessories such as nuts, bolts, fasteners etc.).

Providing and fixing M.S. grills of required pattern in frames of

windowsetc. with M.S. flats, square or round bars etc. including

63 SW-2 priming coatwith approved steel primer all complete. Fixed to kg 905.20 86.73 78508.00

openings /wooden frames with rawl plugs screws etc.

Steel work in built up tubular ( round, square or rectangular hollow

tubesetc.) trusses etc., including cutting, hoisting, fixing in position

64 SW-3 andapplying a priming coat of approved steel primer, including kg 3100.63 91.54 283831.67

welding andbolted with special shaped washers etc.

complete.(Skylight domes)

SOR 2017/ M.R. ITEMS

S.No. DESCRIPTION UNIT QTY. RATE SOR AMOUNT

M.R. ITEMS AMOUNT

Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar,

bent to shape with hooked ends in R.C.C. slabs or beams during

65 M.R. laying, including painting the exposed portion of loop, all as per each 110.00 144.77 15924.70

standard design complete.

SH: FLOORING WORK

Providing and laying for Flooring and skirting works with vitrified

floor tiles in different sizes (thickness to be specified by the

manufacturer) with water absorption's less than 0.08% and

confirming to IS : 15622 of approved make in all colours and shades,

laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand)

including grouting the joints with white cement and matching

pigments etc., complete.

Providing and laying Flooring & Skirting Works of Special

plain/printed series Glazed Ceramic floor tiles of size 400x400mm or

more (thickness to be specified by the manufacturer), of 1st quality

conforming to IS : 15622, of approved make, in all colours, shades,

FL-7&8 laid on 20 mm thick Cement Mortar1:4 (1 Cement : 4 Coarse sand),

including cost of tiles,cement,sand etc and fixing charges, pointing

the joints with white cement and matching pigments etc., complete

for finished item of work.

67 Ground Floor Sqm 32.18 853.51 27465.95

Providing and fixing wall Dadoing works of Ist quality ceramic glazed

wall tiles size 200x300mm or more (thickness to be specified by the

manufacturer), of 1st quality conforming to IS:15622 (thickness to be

specified by the manufacturer), of approved make,in all colours,

shades except burgundy, bottle green, black of any size asapproved

by Engineer-in-Charge, in skirting, risers of steps and dados,over 12

mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand)and

jointing with grey cement slurry @ 3.3kg per sqm, including pointing

in white cement mixed with pigment of matching shade complete. For

Toilet Areas (Upto Door height)

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded

stone aggregate) finished with a floating coat of neat cement,

including cement slurry, but excluding the cost of nosing of steps

69 M.R. 40 mm thick with 20 mm nominal size stone aggregate sqm 887.05 347.42 308178.91

52 mm thick cement concrete flooring with concrete hardener

topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2

coarse sand : 4 graded stone aggregate 20 mm nominal size) and top

layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement

hardener mix : 2 graded stone aggregate 6 mm nominal size) by

volume, hardening compound mixed @ 2 litre per 50 kg of cement or

as per manufacturer's specifications. This includes cost of cement

slurry, but excluding the cost of nosing of steps etc. complete.

Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1

cement : 3 coarse sand), finished with a floating coat of neat cement.

Providing and fixing glass strips in joints of terrazo/ cement concrete

72 M.R. 40 mm wide and 4 mm thick metre 228.96 56.95 13039.27

Chequerred precast cement concrete tiles 22 mm thick in footpath &

courtyard, jointed with neat cement slurry mixed with pigment to

match the shade of tiles, including rubbing and cleaning etc.

complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4

73 M.R. Light shade pigment using white cement sqm 110.00 767.74 84451.00

Extra for pre finished nosing to treads of steps of marble stone.

Extra for granite flooring in treads of steps and risers using single

length up to 2.00 metre.

SOR 2017/ M.R. ITEMS

S.No. DESCRIPTION UNIT QTY. RATE SOR AMOUNT

M.R. ITEMS AMOUNT

40 mm thick fine dressed stone flooring over 20 mm (average) thick

base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints

finished flush.

Providing and laying flamed finish Granite stone flooring including

skirting in required design and patterns, in linear as well as

curvilinear portions of the building all complete as per the

architectural drawings with 18 mm thick stone slab over 20 mm

(average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand)

laid and jointed with cement slurry and pointing with white cement

slurry admixed with pigment of matching shade including rubbing,

curing and polishing etc. all complete as specified and as directed by

the Engineer-in-Charge :

Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown,

Cat Eye or equivalent.

Making khurras 45x45 cm with average minimum thickness of 5 cm

cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone

aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400

78 M.R. micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse each 12.00 200.88 2410.56

sand) and a coat of neat cement, rounding the edges and making and

finishing the outlet complete.

SH: FINISHING WORK

cement plastering 6 mm thick in single coat with CM (1:4)(1 Cement:4

Fine sand) and finished rough with sponge finishing including cost

and conveyance of all materials like cement, sand, water etc., to site,

Including seigniorage charges, sales & other taxes on all materials,

and all operational, incidental charges on materials and including

P.W-1 cost of all labour charges for mixing mortar, finishing, scaffolding, lift

charges, curing, including cutting Grooves as directed by Engineer -

in - charge etc., complete for RCC exposed faces for finished item of

work. for:-Ceiling & Beams Plastering

Plastering 12 mm thick in CM (1:6)(1 Cement:6 Coarse sand)

finished rough with sponge finishing including cost and conveyance

of all materials like cement, sand, water etc., to site, including

seigniorage charges, sales & other taxes on all materials, and all

operational, incidental charges on materials and including cost of all

labour charges for mixing mortar, finishing, scaffolding, lift charges,

curing, including cutting Grooves as directed by Engineer - in -

charge etc., complete for Internal Walls of Brick Wall and RCC

exposed faces for finished item of work.

External Plastering 18 mm thick with Water proof compound in two

coats with base coat of 12mm thick in CM (1:5)(1 Cement: 5 Coarse

sand) and top coat of 6mm thick in CM (1:3)(1 cement:3 Fine sand)

finished rough with sponge finishing including cost and conveyance

of all materials like cement, sand, water etc., to site, including

seigniorage charges, sales & other taxes on all materials, and all

82 P.W-3 operational, incidental charges on materials and including cost of all sqm 354.93 386.31 137113.01

labour charges for mixing mortar, finishing, scaffolding, lift charges,

curing, including cutting Grooves as directed by Engineer - in -

charge etc., complete for External Walls of Brick Wall and RCC

exposed faces for finished item of work.

Applying one coat of water thinnable cement primer of approved

brand and manufacture on wall surface after thoroughly brushing

the surface to remove all dirt and remains of loose powdered

83 PAI-3 materials including cost of all materials, labour charges and sqm 2294.11 85.93 197132.87

incidental such as scaffolding, lift charges etc., complete for finished

item of work-For Internal walls

SOR 2017/ M.R. ITEMS

S.No. DESCRIPTION UNIT QTY. RATE SOR AMOUNT

M.R. ITEMS AMOUNT

Wall painting with premium acrylic emulsion paint of interior grade,

having VOC (Volatile Organic Compound) Content less than 50

Grams/litre of approved brand and manufacture, including applying

additional coats wherever required to achieve even shade and colour

2 Coats-For Internal walls

Providing and applying white cement based putty of average

thickness1 mm, of approved brand and manufacturer, over the

plastered wallsurface to prepare the surface even and smooth

complete.-For Internal walls.

Providing wood work with Deluxe Multi surface Enamel paint of

requied shade. Two or more coat applied @ 0.90 ltr / 10 sqm over an

under coat of primer applied @ 0.75 ltr / 10 sqm of approved brand or

manufacture of required shade and colour complete, as per

manufacturer;s specification including cost of all materials, labour

charges and incidental such as scaffolding, lift charges etc.,

complete for finished item of work,- For Wood Doors doors

Painting Steel work with Deluxe Multi Surface Enamel Paint to give an

even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an

87 PAI-12 under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and sqm 265.80 113.52 30173.62

manufacture-For MS Grills and Steel works

15 mm cement plaster on the rough side of single or half brick wall of

Distempering with oil bound washable distemper of approved brand

and manufacture to give an even shade :

New work (two or more coats) over and including water thinnable

priming coat with cement primer

SH: ALUMINIUM WORK

Providing and fixing aluminium work for doors, windows, ventilators

and partitions with extruded built up standard tubular sections/

appropriate Z sections and other sections of approved make

conforming to IS: 733 and IS: 1285, fixing with dash fasteners of

required dia and size, including necessary filling up the gaps at

junctions, i.e. at top, bottom and sides with required EPDM rubber/

neoprene gasket etc. Aluminium sections shall be smooth, rust

free,straight, mitred and jointed mechanically wherever required

including cleat angle, Aluminium snap beading for glazing / paneling,

C.P. brass / stainless steel screws, all complete as per architectural

drawings and the directions of Engineer-in-charge. (Glazing, paneling

and dash fasteners to be paid for separately) :

For fixed portion

Powder coated aluminium (minimum thickness of powder coating 50

For shutters of doors, windows & ventilators including providing and

fixing hinges/pivots/Sliding assessories and making provision for

fixing of fittings wherever required including the cost of EPDM

rubber / neoprene gasket required (Fittings shall be paid for

Powder coated aluminium (minimum thickness of powder coating 50

Providing and fixing glazing in aluminium door, window, ventilator

shutters and partitions etc. with EPDM rubber / neoprene gasket etc.

complete as per the architectural drawings and the directions of

engineer-in-charge . (Cost of aluminium snap beading shall be paid in

With float glass panes of 8 mm thickness (weight not less than 20 kg/

Filling the gap in between aluminium frame & adjacent RCC/ Brick/

Stone work by providing weather silicon sealant over backer rod of

approved quality as per architectural drawings and direction of

Engineer-in-charge complete.

93 M.R. Upto 5mm depth and 5 mm width Metre 514.51 78.75 40518.00

SH: NEW TECHNOLOGIES AND MATERIALS

SOR 2017/ M.R. ITEMS

S.No. DESCRIPTION UNIT QTY. RATE SOR AMOUNT

M.R. ITEMS AMOUNT

Providing and fixing mineral fibre false ceiling tiles at all heights of

size 595X595mm of approved texture, design and pattern. The tiles

should have Humidity Resistance (RH) of 99%, Light Reflectance >

85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance

as per (BS 476 pt - 6 &7)in true horizontal level suspended on

interlocking T-Grid of hot dipped all round galvanized iron section of

0.33 mm thick (galvanized @120 gsm) comprising of main T runners

of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length

1200 mm and secondary intermediate cross T of size 15x32 mm of

length 600 mm to form grid module of size 600x600 mm suspended

from ceiling using galvanized mild steel item (galvanised@80gsm) 50

mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter

fully threaded hanger rod up to 1000 mm length and L-shape level

adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre

along main ‘T’. The system should rest on periphery walls /partitions

with the help of GI perimeter wall angle of size24x24X3000 mm made

of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl

plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws.

The exposed bottom portion of all T-sections used in false ceiling

support system shall be pre-painted with polyester baked paint, for

all heights. The work shall be carried out as per specifications,

drawings and as per directions of the engineer-incharge.

With 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC

Laminated wooden planking, tongued and grooved in flooring,

95 M.R. including fixing with iron screws, all assessories like foam etc sqm 105.47 1642.14 173196.51

Providing and laying in position Carpet of approved make complete

96 M.R. in all respects as per manufacturers specification all complete and as sqm 12.88 1235.84 15917.62

per direction of Engineer-in-charge.

Providing and Fixing 304 grade Stainless Steel Toilet Grab Bar of

approved make, 19 mm diametre x 300 mm long (screws included) set

of 2-Rx915-2 (silver) all complete as per direction of Engineer-in-

Providing and fixing GI hexagonal chicken wire mesh of size 12mm x

22g at the junction of disimilar surfaces of brick masonry wall and

R C C column by beams and the like including necessary nails for

98 M.R. fixing etc, complete all as per specification and direction of Engineer - Sqm 354.58 55.70 19750.11

in -charge for all floor at all heights all complete as per direction of

Engineer-in-Charge.

Providing and application of SIKA TOPSEAL 109 Hi water proofing

99 M.R. works over terrace slab as per manufacturer's quotation all complete Sqm 969.97 447.18 433751.18

Providing and fixing Stainless steel sliding door bolts of Door set or

equivalent make with necessary screws etc. all complete as per

direction of Engineer-in-charge

100 M.R. 300 mm SS Sliding Door Bolt Each 18 1883.49 33902.82

101 M.R. 450 mm SS Cylindrical handle Each 25 517.56 12939.00

Providing and fixing stainless steel tower bolts square type of Dorset

or equivalent make with necessary screws etc. all complete as per

direction of Engineer-in-charge .

102 M.R. 450 mm SS Tower Bolt Each 29 859.05 24912.45

103 M.R. 200 mm SS Tower Bolt Each 29 810.26 23497.54

104 M.R. SS Double Action Hydraulic Spring Hinge Each 6 956.61 5739.66

Providing and fixing 10 mm thick multi wall polycarbonate sheets as

105 M.R. per manufacturers specification all complete and as per direction of Sqm 10.85 2727.95 29598.26

Engineer-in-charge.

Providing and fixing Accostical wall panelling with mineral wool

106 M.R. backing as per manufacturers specification all complete and as per Sqm 280.92 1626.11 456806.82

direction of Engineer-in-charge.

Wall painting with premium External Grade Acrylic emulsion paint

107 M.R. with Silicon additives to achieve required even shade and colour Sqm 787.50 143.10 112690.68

over 15 thick plaster.

Wall lining to give golden mean rectangle pattern on wall with

textured paint finish over 18 thick plaster.

TOTAL BUILDING CIVIL WORK 29862689.05

SOR 2017/ M.R. ITEMS

S.No. DESCRIPTION UNIT QTY. RATE SOR AMOUNT

M.R. ITEMS AMOUNT

SOAK PIT WORKS ESTIMATE

Construction of septic tank of different capacities as per approved

drawing with 1 class brick work in cement mortar (1:4) including two

560 mm dia. R.C.C manhole cover (heavy type) of approved make

supplied, fitted and Fixed in the 100 mm thick R.C.C (1:1:5:3) top

slab with necessary fittings, 20 mm thick cement plaster (4:1) with

neat cement finish to the internal surfaces and 15 mm thick cement

109 M.R. plaster (4:1) to outside wall upto 200 mm below G.L floor finished each 1.00 252000.00 252000.00

with 25mm thick grey artificial stone over 100 mm thick R.C.C

(1:1:5:3) bottom slab including supplying, fitting and fixing all

necessary specials, fittings, S.W. tees, C.I. foot rest etc. including

excavation earth in all sorts of soil, shoring, bailing out and pumping

out water as necessary, ramming,

dressing the bed and refilling the sides of the tanks with earth,

removing spoils, filling up the chamber with clear water removing

foreign materials from the chamber and including construction

attached inspection pit as per approved drawing and connecting all

necessary pipes, joints etc. With internal plaster work and artificial

stone flooring is to be done with admixture of water proofing

compound @ 0.5% by weight of cement with all costs of labour and

Construction of circular soak well 2.5 metre deep in all types of sandy

soils with dry brick work upto 1.6 metre from the bottom having

150mm intermediate cement brick work (1:4) band all round and

cement brick work (1:4) upto 0.90 metre from top with 20mm thick

cement plastering (1:4) to inside face upto the depth of cement brick

work, 15mm thick cement plaster (1:4) on outer face from top of the

well upto G.L and 6mm thick cement plaster (1:4) on top of the R.C.C.

cover slab including filling bottom 1.00 metre of inside of the well

with brick metal (50mm to 63mm size) including R.C.C. cover slab of

100 mm thick with cement cone (1:1:5:3)

with stone chips with necessary reinforcement and shuttering

including one 560 mm dia R.C.C manhole cover (heavy type) of

approved make supplied fitted and fixed in the cover slab with

necessary fittings, making necessary arrangements for pipe

connections, excavation of well including shoring, dewatering and

removing the exess earth from the premises as per direction

complete in all respect with all costs of labour and materials.With 250

mm thick dry brick work and 250 mm thick cement brick work (6:1)

and 1.00m inside dia.

SEPTIC TANK AND SOAK PIT 296800.00

ELL WORKS ESTIMATE

CHAPTER 1 : TUBEWELL WORKS

Boring/drilling bore well of required dia for casing/ strainer pipe, by

suitable method prescribed in IS:2800(Part I ) , including collecting

samples from different strata, preparing and submitting strata chart/

bore log, including hire & running charges of all equipment, tools,

plants & machineries required for the job, all complete as per

direction of Engineer-in-charge, upto 50m depth below ground level.

All types of Soil

Gravel packing in tubewell construction in accordance with IS: 4097

including providing gravel fine/medium/coarse, in required grading

112 2 and sizes as per actual requirement, all complete as per direction of Cum 0.85 1416.07 1203.66

Engineer-in-charge.

SOR 2017/ M.R. ITEMS

S.No. DESCRIPTION UNIT QTY. RATE SOR AMOUNT

M.R. ITEMS AMOUNT

Supplying, assembling, lowering and fixing in vertical position in

bore well, ERW (Electric Resistance Welded) FE410 mild steel

screwed and socketed/ plain ended, casing pipes of required dia.

Conforming to IS : 4270, of reputed & approved makes, including

3 painted with outside surface with two coasts of anticorrosive paint of

approved brand and manufacture, including required hire & labour

charges, fittings & accessoires, all complete, for all depths, as per

directior of Engineer-in-charge.

200mm nominal size dia having minimum wall thickness 5.40mm

Supplying, assembling, lowering and fixing in vertical position in

bore well, ERW (Electric Resistance Welded) FE410 plain

slotted(having slot of size 1.6/3.2mm) mild steel threaded and

socketed/ plain bevel ended pipe (type A) of required dia, Conforming

to IS : 8110, of reputed & approved makes, having wall thickness not

less than 5.40mm including painted with outside surface with two

coasts of anticorrosive paint of approved brand and manufacture,

including required hire & labour charges, fittings & accessories, all

complete, for all depths, as per direction of Engineer-in-charge.

114 4.1 200 mm nominal size dia metre 7.65 1966.76 15045.71

Development of Tube well in accordance with IS: 2800 (Part 1) and IS:

11189, to establish maximum rate of usable water yield without sand

content (beyond permissible limit), with required capacity air

compressor, running the compressor for required time till well is fully

developed, measuring yield of well by "V" notch method or any other

approved method, measuring static level & draw down etc. by step

115 5 draw down method, collecting water samples & getting tested in Hour 29.75 574.29 17085.13

approved laboratory, i/c disinfection of tube well, all complete

including hire & labour charges of air compressor, tools &

accessories etc., all as per requirement and direction of Engineer-in-

Providing and fixing suitable size threaded mild steel cap or spot

welded plate to the top of borewell housing/ casing pipe, removable

as per requirement, all complete for bore well of.

Providing and fixing MS Clamp of required dia to the top of casing/

7 housing pipe of tube well as per IS: 2800 (part 1) including necessary

bolts & nuts of required size complete.

Providing and fixing bail plug/ bottom plug of required dia to the

8 bottom of pipe assembly of tubewell as per IS: 2800 (part 1).

Supplying, installation, testing & commissioning of three phase

submersible motor pump set for 150 mm bore well and above. 5 HP

STAGE 9 to 50 with three phase preventor, voltmeter, MCB controlled

submersible motor pump set control panel including cabling, wiring

and fixing in a suitable position within 50 metres. The rate is inclusive

119 9 of pump, starter, panel box, cable, wire and other accessories as Each 2 94404.88 188809.76

required for its successful commissioning. The submersible pump is

to get approved from competent authority before installation.

Providing and fixing 18 mm thick gang saw cut, mirror polished,

premoulded and prepolished, machine cut for kitchen platforms,

vanity counters, window sills, facias and similar locations of required

size, approved shade, colour and texture laid over 20 mm thick base

10 cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with

white cement, mixed with matching pigment, epoxy touch ups,

including rubbing, curing, moulding and polishing to edges to give

high gloss finish etc. complete at all levels.

Granite of any colour and shade

120 10.1 Area of slab upto 0.50 sqm sqm 4 3933.54 15734.16

TOTAL 389898.06

SOR 2017/ M.R. ITEMS

S.No. DESCRIPTION UNIT QTY. RATE SOR AMOUNT

M.R. ITEMS AMOUNT

ND WATER TANK ESTIMATE

A) Earth work in all kind of soil(Ordinary soil,Hard soil,& Stoney

earth) with initial lead and lift including rough dressing in layers not

121 E.W-1 exceeding 0.3m in depth and the Earth transported by transport Cum 601.25 227.68 136892.60

vehicles as directed by the Engineer-in-charge.

Cutting in disintegrated rock not requiring blasting to be removed by

pick axes and crow barsand depositing materials within 50m lead and

1.5m initial lift inluding rough dressing as per direction and

specification of the departement stacking useful materials separately

Extra lift or 1.5m or part there of over the initial lift of 1.5m in all kinds

E.W-5 of embankments and road works and ordinary earth work in general.

E.W-5A All kinds of soil

E.W-5B Ordinary or hard rock

Filling available excavated earth (excluding rock) in trenches,

plinth,sides of foundations etc. in layers not exceeding 20cm in

depth,consolidating each deposited layer by ramming and watering,

lead upto 50 m and lift upto 1.5 mincluding cost and conveyance of

all materials, water to work site, excluding seigniorage charges and

all operational, incidental, labour charges, etc. complete for finished

Filling in foundation and plinth with filling sand, watered and

rammed. including cost and conveyance of all materials, water to

128 E.W-7 work site, excluding seigniorage charges and all operational, Cum 0.73 377.33 275.45

incidental, labour charges, etc. complete for finished item of work

SH: CONCRETE WORKS

Providing and laying in position cement concrete of specified grade

C.W-1 excluding the cost of centering and shuttering - All work up to plinth

1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40mm

For Footings,Center raft & Retaining wall raft-(Below Ground Level)

Providing and laying damp-proof course 40mm thick with cement

130 M.R. concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone sqm 5.09 415.84 2116.63

aggregate 12.5mm nominal size)

Extra for providing and mixing water proofing material in cement

131 M.R. concrete work in doses by weight of cement as per manufacturer's 1.35 53.35 72.02

Providing & applying a coat of residual petroleum bitumen of grade

of VG-10 of approved quality using 1.7kg per square metre on damp

132 M.R. proof course after cleaning the surface with brushes and finally with sqm 5.09 78.65 400.33

apiece of cloth lightly soaked in kerosene oil.

Providing and laying in position ready mixed plain cement concrete,

with cement content as per approved design mix and manufactured

in fully automatic batching plant and transported to site of work in

transit mixer for all leads, having continuous agitated mixer,

manufactured as per mix design of specified grade for plain cement

concrete work, including pumping of R.M.C. from transit mixer to site

of laying and curing, excluding the cost of centering, shuttering and

finishing, including cost of curing, admixtures in recommended

proportions as per IS : 9103 to accelerate/ retard setting of concrete,

improve workability without impairing strength and durability as per

direction of the Engineerin- charge.

Note : 1) Excess/less cement used than specified in this item is

payable/recoverable separately.

All works upto plinth level :

SOR 2017/ M.R. ITEMS

S.No. DESCRIPTION UNIT QTY. RATE SOR AMOUNT

M.R. ITEMS AMOUNT

M-15 grade plain cement concrete (cement content considered @ 240

SH: REINFORCED CEMENT CONCRETE WORK

Centering and shuttering including strutting, propping etc. and

removal of form for :

Foundations, footings, bases of columns, etc. for mass concrete

Walls (any thickness) including attached pilasters, butteresses, plinth

and string courses etc.

Suspended floors, roofs, landings, balconies and access platform

Lintels, beams, plinth beams, girders, bressumers and cantilevers

138 M.R. Columns, Pillars, Piers, Abutments, Posts and Struts Sqm 22.09 318.36 7032.57

Steel reinforcement for R.C.C. work including straightening, cutting,

bending, placing in position and binding all complete upto plinth

Thermo-Mechanically Treated bars of grade Fe-500D or more.

Steel reinforcement for R.C.C. work including straightening, cutting,

bending, placing in position and binding all complete above plinth

Thermo-Mechanically Treated bars of grade Fe-500D or more.

Providing and laying in position machine batched and machine mixed

design mix M-25 grade cement concrete for reinforced cement

concrete work, using cement content as per approved design mix,

including pumping of concrete to site of laying but excluding the cost

of centering, shuttering, finishing and reinforcement, including

admixtures in recommended proportions as per IS: 9103 to

accelerate, retard setting of concrete, improve workability without

impairing strength and durability as per direction of Engineer-in-

(Note :- Cement content considered in this item is @ 330 kg/cum.

Excess/ less cement used as per design mix is payable/recoverable

141 M.R. All works upto plinth level Cum 116.98 5394.11 631002.99

142 M.R. All works above plinth level upto floor V level Cum 34.10 5764.84 196581.04

Brick work with common burnt clay F.P.S. (non modular) bricks of

class designation 7.5 in foundation and plinth in:

143 M.R. Cement mortar 1:6 (1 cement : 6 coarse sand) cum 6.73 3471.88 23365.75

Brick work with non modular fly ash bricks conforming to IS:12894,

class designation 10 average compressive strength in super

structure above plinth level up to floor V level in :

Cement mortar 1:6 (1 cement : 6 Coarse sand)

Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar,

bent to shape with hooked ends in R.C.C. slabs or beams during

145 M.R. laying, including painting the exposed portion of loop, all as per each 3 122.42 367.26

standard design complete.

Steel work welded in built up sections/ framed work, including

cutting, hoisting, fixing in position and applying a priming coat of

approved steel primer using structural steel etc. as required.

a) In stringers, treads, landings etc. of stair cases, including use of

chequered plate wherever required, all complete

b) In gratings, frames, guard bar, ladder, railings, brackets, gates,

pargola etc. and similar works

SH: FLOORING WORK

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded

stone aggregate) finished with a floating coat of neat cement,

including cement slurry, but excluding the cost of nosing of steps

SOR 2017/ M.R. ITEMS

S.No. DESCRIPTION UNIT QTY. RATE SOR AMOUNT

M.R. ITEMS AMOUNT

52 mm thick cement concrete flooring with concrete hardener

topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2

coarse sand : 4 graded stone aggregate 20 mm nominal size) and top

layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement

hardener mix : 2 graded stone aggregate 6 mm nominal size) by

volume, hardening compound mixed @ 2 litre per 50 kg of cement or

as per manufacturer's specifications. This includes cost of cement

slurry, but excluding the cost of nosing of steps etc. complete.

Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1

cement : 3 coarse sand), finished with a floating coat of neat cement.

Providing and fixing glass strips in joints of terrazo/ cement concrete

150 M.R. 40 mm wide and 4 mm thick metre 9.51 42.06 399.99

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2

coarse sand : 4 stone aggregate 10 mm and down gauge), including

finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per

standard design :

151 M.R. In 75x75 mm deep chase metre 40.74 620.82 25292.21

Making khurras 45x45 cm with average minimum thickness of 5 cm

cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone

aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400

152 M.R. micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse each 1 145.35 145.35

sand) and a coat of neat cement, rounding the edges and making and

finishing the outlet complete.

SH: FINISHING WORK

cement plastering 6 mm thick in single coat with CM (1:4)(1 Cement:4

Fine sand) and finished rough with sponge finishing including cost

and conveyance of all materials like cement, sand, water etc., to site,

Including seigniorage charges, sales & other taxes on all materials,

and all operational, incidental charges on materials and including

P.W-1 cost of all labour charges for mixing mortar, finishing, scaffolding, lift

charges, curing, including cutting Grooves as directed by Engineer -

in - charge etc., complete for RCC exposed faces for finished item of

work. for:-Ceiling & Beams Plastering

Plastering 12 mm thick in CM (1:6)(1 Cement:6 Coarse sand)

finished rough with sponge finishing including cost and conveyance

of all materials like cement, sand, water etc., to site, including

seigniorage charges, sales & other taxes on all materials, and all

operational, incidental charges on materials and including cost of all

labour charges for mixing mortar, finishing, scaffolding, lift charges,

curing, including cutting Grooves as directed by Engineer - in -

charge etc., complete for Internal Walls of Brick Wall and RCC

exposed faces for finished item of work.

External Plastering 18 mm thick with Water proof compound in two

coats with base coat of 12mm thick in CM (1:5)(1 Cement: 5 Coarse

sand) and top coat of 6mm thick in CM (1:3)(1 cement:3 Fine sand)

finished rough with sponge finishing including cost and conveyance

of all materials like cement, sand, water etc., to site, including

seigniorage charges, sales & other taxes on all materials, and all

155 P.W-3 operational, incidental charges on materials and including cost of all sqm 125.51 304.91 38269.25

labour charges for mixing mortar, finishing, scaffolding, lift charges,

curing, including cutting Grooves as directed by Engineer - in -

charge etc., complete for External Walls of Brick Wall and RCC

exposed faces for finished item of work.

SOR 2017/ M.R. ITEMS

S.No. DESCRIPTION UNIT QTY. RATE SOR AMOUNT

M.R. ITEMS AMOUNT

Applying one coat of water thinnable cement primer of approved

brand and manufacture on wall surface after thoroughly brushing

the surface to remove all dirt and remains of loose powdered

156 PAI-3 materials including cost of all materials, labour charges and sqm 258.11 60.67 15659.53

incidental such as scaffolding, lift charges etc., complete for finished

item of work-For Internal walls

Providing and applying white cement based putty of average

thickness1 mm, of approved brand and manufacturer, over the

plastered wallsurface to prepare the surface even and smooth

complete.-For Internal walls.

Painting Steel work with Deluxe Multi Surface Enamel Paint togive an

even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an

158 PAI-12 under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and sqm 13.44 86.31 1160.01

manufacture-For MS Grills and Steel works

Distempering with oil bound washable distemper of approved brand

and manufacture to give an even shade :

New work (two or more coats) over and including water thinnable

priming coat with cement primer

Finishing walls with textured exterior paint of required shade :

New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and

160 M.R. including priming coat of exterior primer applied @ 2.20kg/10 sqm sqm 125.51 141.06 17704.44

SH: ALUMINIUM WORK

Providing and fixing aluminium work for doors, windows, ventilators

and partitions with extruded built up standard tubular sections/

appropriate Z sections and other sections of approved make

conforming to IS: 733 and IS: 1285, fixing with dash fasteners of

required dia and size, including necessary filling up the gaps at

junctions, i.e. at top, bottom and sides with required EPDM rubber/

neoprene gasket etc. Aluminium sections shall be smooth, rust

free,straight, mitred and jointed mechanically wherever required

including cleat angle, Aluminium snap beading for glazing / paneling,

C.P. brass / stainless steel screws, all complete as per architectural

drawings and the directions of Engineer-in-charge. (Glazing, paneling

and dash fasteners to be paid for separately) :

For fixed portion

Powder coated aluminium (minimum thickness of powder coating 50

For shutters of doors, windows & ventilators including providing and

fixing hinges/pivots/Sliding assessories and making provision for

fixing of fittings wherever required including the cost of EPDM

rubber / neoprene gasket required (Fittings shall be paid for

Powder coated aluminium (minimum thickness of powder coating 50

Providing and fixing glazing in aluminium door, window, ventilator

shutters and partitions etc. with EPDM rubber / neoprene gasket etc.

complete as per the architectural drawings and the directions of

engineer-in-charge . (Cost of aluminium snap beading shall be paid in

With float glass panes of 8 mm thickness (weight not less than 20 kg/

Filling the gap in between aluminium frame & adjacent RCC/ Brick/

Stone work by providing weather silicon sealant over backer rod of

approved quality as per architectural drawings and direction of

Engineer-in-charge complete.

164 M.R. Upto 5mm depth and 5 mm width Metre 17.64 73.29 1293.00

SH: WATER PROOFING WORK

Providing and laying integral cement based treatment for water

proofing on horizontal surface at all depth below ground level for

under ground structures as directed by Engineer-in-Charge and

consisting of :

SOR 2017/ M.R. ITEMS

S.No. DESCRIPTION UNIT QTY. RATE SOR AMOUNT

M.R. ITEMS AMOUNT

(i) Ist layer of 22 mm to 25 mm thick approved and specified rough

stone slab over a 25 mm thick base of cement mortar 1:3 (1 cement :

3 coarse sand) mixed with water proofing compound conforming to

IS:2645 in the recommended proportion over the leveling course

(leveling course to be paid separately). Joints sealed and grouted

with cement slurry mixed with water proofing compound.

(ii) 2nd layer of 25 mm thick cement mortar 1:3 (1 cement: 3 coarse

sand) mixed with water proofing compound in recommended

(iii) Finishing top with stone aggregate of 10 mm to 12 mm nominal

size spreading @ 8 cudm/sqm thoroughly embedded in the 2nd layer.

165 M.R. Using rough kota stone. sqm 195.10 1158.05 225936.00

Providing and laying integral cement based treatment for water

proofing on the vertical surface by fixing specified stone slab 22 mm

to 25 mm thick with cement slurry mixed with water proofing

compound conforming to IS:2645 in recommended proportions with

a gap of 20 mm (minimum) between stone slabs and the receiving

surfaces and filling the gaps with neat cement slurry mixed with

water proofing compound and finishing the exterior of stone slab

with cement mortar 1:3 (1 cement : 3 coarse sand) 20 mm thick with

neat cement punning mixed with water proofing compound in

recommended proportion complete at all levels and as directed by

Engineer-in-charge :

166 M.R. Using rough Kota stone sqm 384.57 1676.09 644574.00

Providing and laying integral cement based water proofing treatment

including preparation of surface as required for treatment of roofs,

balconies, terraces etc consisting of following operations:

(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of

cement admixed with water proofing compound conforming to IS.

2645 and approved by Engineer-in-charge over the RCC slab

including adjoining walls upto 300 mm height including cleaning the

surface before treatment.

(b) Laying brick bats with mortar using broken bricks/brick bats 25

mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5

coarse sand) admixed with water proofing compound conforming to

IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer

of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with

water proofing compound conforming to IS : 2645 and approved by

Engineer-in-charge to required slope and treating similarly the

adjoining walls upto 300 mm height including rounding of junctions

of walls and slabs.

(c) After two days of proper curing applying a second coat of cement

slurry using 2.75 kg/ sqm of cement admixed with water proofing

compound conforming to IS : 2645 and approved by Engineerin-

(d) Finishing the surface with 20 mm thick jointless cement mortar of

mix 1:4 (1 cement :4 coarse sand) admixed with water proofing

compound conforming to IS : 2645 and approved by Engineerin-

charge including laying glass fibre cloth of approved quality in top

layer of plaster and finally finishing the surface with trowel with neat

cement slurry and making pattern of 300x300 mm square 3 mm deep.

(e) The whole terrace so finished shall be flooded with water for a

minimum period of two weeks for curing and for final test.“All above

operations to be done in order and as directed and specified by the

Engineer-in-Charge :

With average thickness of 120 mm and minimum thickness at khurra

TOTAL UNDER GROUND WATER TANK 3700453.14

TION WATER WORKS

SOR 2017/ M.R. ITEMS

S.No. DESCRIPTION UNIT QTY. RATE SOR AMOUNT

M.R. ITEMS AMOUNT

Boring/drilling bore well of required dia for casing/ strainer pipe, by

suitable method prescribed in IS:2800(Part I ) , including collecting

samples from different strata, preparing and submitting strata chart/

bore log, including hire & running charges of all equipment, tools, plants

1 & machineries required for the job, all complete as per direction of

Engineer-in-charge, upto 50m depth below ground level.

All types of Soil

Gravel packing in tubewell construction in accordance with IS: 4097

including providing gravel fine/medium/coarse, in required grading and

168 2 sizes as per actual requirement, all complete as per direction of Engineer- Cum 0.85 1416.07 1203.66

Supplying, assembling, lowering and fixing in vertical position in bore

well, ERW (Electric Resistance Welded) FE410 mild steel screwed and

socketed/ plain ended, casing pipes of required dia. Conforming to IS :

4270, of reputed & approved makes, including painted with outside

3 surface with two coasts of anticorrosive paint of approved brand and

manufacture, including required hire & labour charges, fittings &

accessoires, all complete, for all depths, as per directior of Engineer-in-

200mm nominal size dia having minimum wall thickness 5.40mm

Supplying, assembling, lowering and fixing in vertical position in bore

well, ERW (Electric Resistance Welded) FE410 plain slotted(having slot of

size 1.6/3.2mm) mild steel threaded and socketed/ plain bevel ended

pipe (type A) of required dia, Conforming to IS : 8110, of reputed &

approved makes, having wall thickness not less than 5.40mm including

4 painted with outside surface with two coasts of anticorrosive paint of

approved brand and manufacture, including required hire & labour

charges, fittings & accessories, all complete, for all depths, as per

direction of Engineer-in-charge.

170 4.1 200 mm nominal size dia metre 7.65 1966.76 15045.71

Development of Tube well in accordance with IS: 2800 (Part 1) and IS:

11189, to establish maximum rate of usable water yield without sand

content (beyond permissible limit), with required capacity air

compressor, running the compressor for required time till well is fully

developed, measuring yield of well by "V" notch method or any other

approved method, measuring static level & draw down etc. by step draw

5 down method, collecting water samples & getting tested in approved Hour 29.75 574.29 17085.13

laboratory, i/c disinfection of tube well, all complete including hire &

labour charges of air compressor, tools & accessories etc., all as per

requirement and direction of Engineer-in-charge.

Providing and fixing suitable size threaded mild steel cap or spot welded

plate to the top of borewell housing/ casing pipe, removable as per

requirement, all complete for bore well of.

Providing and fixing MS Clamp of required dia to the top of casing/

7 housing pipe of tube well as per IS: 2800 (part 1) including necessary

bolts & nuts of required size complete.

SOR 2017/ M.R. ITEMS

S.No. DESCRIPTION UNIT QTY. RATE SOR AMOUNT

M.R. ITEMS AMOUNT

Providing and fixing bail plug/ bottom plug of required dia to the

8 bottom of pipe assembly of tubewell as per IS: 2800 (part 1).

Supplying, installation, testing & commissioning of three phase

submersible motor pump set for 150 mm bore well and above. 5 HP

STAGE 9 to 50 with three phase preventor, voltmeter, MCB controlled

submersible motor pump set control panel including cabling, wiring and

fixing in a suitable position within 50 metres. The rate is inclusive of

174 9 pump, starter, panel box, cable, wire and other accessories as required Each 2 94404.88 188809.76

for its successful commissioning. The submersible pump is to get

approved from competent authority before installation.

Providing and fixing 18 mm thick gang saw cut, mirror polished,

premoulded and prepolished, machine cut for kitchen platforms, vanity

counters, window sills, facias and similar locations of required size,

approved shade, colour and texture laid over 20 mm thick base cement

10 mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement,

mixed with matching pigment, epoxy touch ups, including rubbing,

curing, moulding and polishing to edges to give high gloss finish etc.

complete at all levels.

Granite of any colour and shade

175 10.1 Area of slab upto 0.50 sqm sqm 4 3933.54 15734.16

2.1 Supply, laying & commissioning in position PVC pipe conforming to

IS:4985:2000 and suitable for the respective working pressures without

all fittings and accessories e.g. couplings, tees, bends, reducers, screwed

adapters, flanged tail pieces all supporting and fixing accssories etc.

jointing as per site in charge instruction

2.2 Excavating trenches of required width for pipes, cables, etc including

excavation for sockets, and dressing of sides, ramming of bottoms,

depth upto 1.5 m, including getting out the excavated soil, and then

returning the soil as required, in layers not exceeding 20 cm in depth,

including consolidating each deposited layer by ramming, watering, etc.

and disposing of surplus excavated soil as directed, within a lead of 50 m

2.2.1 Pipes, cables etc. exceeding 20 mm dia but not exceeding 80 mm dia. cum

2.3 Supply,Fixing & commissioning of Pop up spray head1804 Series Spray No.

bodies, with Rotary nozzle having mutilple stream MPR spray having Co-

moulded wiper seal. Nozzle capable of covering 4.0-7.3m at 1.4 - 3.8

2.4 Supply,Fixing & commissioning of 1/2" Pop up Connecting Swing joint No.

Assembly having wall thickness of 2.3mm ,a working pressure of 5.5

184 kg/cm² at 43⁰C and a surge pressure of 16.6 kg/cm². The fittings shall be 63 314.69 19825.47

made of UV resistant thermo plastic.

2.5 Supply,Fixing & commissioning of Imported HDPE service saddle of No.

185 varying size upto 63mm dia with pressure rating of PN 10 63 273.77 17247.51

2.6 Supply,Fixing & commissioning of PVC Ball Valve of size 63mm with No.

pressure rating PN 10

SOR 2017/ M.R. ITEMS

S.No. DESCRIPTION UNIT QTY. RATE SOR AMOUNT

M.R. ITEMS AMOUNT

2.7 Supply of a double acting air and vaccum release 2 " Air release valve No.

.The working pressure shall be 10 KSC .

2.8 Supply, Fixing & commissioning of 6"Round box with greenlid and No.

corrugated structure with unique shovel access slot and bolt hole

knockout & Having Dimensions @ Top Opening :6 1/8" Dia & Bottom

Opening 8 5/8" Dia. PVB/VB

2.9 Supply, Fixing & commissioning of 12" Rectangular Standard Valve Box No.

with greenlid and corrugated structure with unique shovel access slot

189 and bolt hole knockout & having Dimensions @ Top Opening:18 1/4" L X 15 3068.16 46022.40

13" W & bottom opening :21 1/4" L X 15 15/16"W X 12" H PVB/VB

2.10 Supply, Fixing & commissioning of 3/4th Quick coupling valve made up No.

190 of solid brass with locking cover corrosion resistant and stainless steel 10 5506.95 55069.50

2.11 Supply, Fixing & commissioning of 3/4th Key threads into top of QCV to No.

provide water access 33DK

2.12 Supply, Fixing & commissioning of 3/4th Hose Swivel Made up of Solid No.

Brass Swivels up to 360 degrees to allows hose to be pulled in any

direction & Also to prevent Hose Damage. SH-0

193 2.13 Supply, Fixing & commissioning of 2'' Manual Disc Filter No. 1 12587.32 12587.32

TOTAL OF IRRIGATION WATER WORKS 1276366.53

1.1 Providing and fixing water closet squatting pan (Indian type W.C. pan)

with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C.

flushing cistern, including flush pipe, with manually controlled device

(handle lever) conforming to IS : 7231, with all fittings and fixtures

complete, including cutting and making good the walls and floors

wherever required:wherever required :

1.1.1 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with

integral type foot rests

1.2 Providing and fixing white vitreous china white type water closet

(European type ) with seat and lid 10 litre low local white vitreous china

flushing cistern & C.P. flush bend with fittings & C.I brackets 40mm flush

bend, overflow arrangement with special of standards make and

mosquito proof coupling of approved municipal design complete,

including of fittings and brackets, cutting and making good the walls

floors wherever required :

195 1.2.1 W.C. pan with ISI marked white solid plastic seat and lid No. 4 17951.46 71805.84

1.3 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass

pillar taps, 32 mm C.P. brass waste of standard pattern, including

painting of fittings and brackets, cutting and making good the walls

wherever require:

1.3.1 White Vitreous China Wash basin size 550x400 mm with

a pair of 15 mm C.P. brass pillar taps

1.4 Providing and fixing stainless steel A ISI 304 (18/8) Kitchen sink as per IS

: 13983 with CI bracket and stainless steel plug 40 mm including painting

of fittings and brackets ,cutting and making good the walls wherever

1.4.1 Kitchen sink with drain board

1.5 Providing and fixing CP Brass 32mm size Bottle Trap of approved quality

& make and as per the direction of Engineer-in-charge.

1.6 Providing and fixing 600x450 mm bevelled edge mirror of superior glass

(of approved quality) complete with 6 mm thick hard board

198 ground fixed to wooden cleats with C.P. brass screws and washers No. 4 1628.64 6514.56

1.8 Providing and fixing toilet paper holder :

SOR 2017/ M.R. ITEMS

S.No. DESCRIPTION UNIT QTY. RATE SOR AMOUNT

M.R. ITEMS AMOUNT

1.9 Providing and fixing of Soap Dispenser with all accessories as required

and making good the walls wherever required.

1.10 Providing and fixing SS 316 grab bar 600 mm long complete with

brackets fixed to wooden cleats with CP brass screws with concealed

fittings arrangement of approved quality and colour.

1.11 Providing and fixing Grab Bar Vertical Swing, complete with brackets

fixed to wooden cleats with CP brass screws with concealed fittings

arrangement of approved quality and colour.

1.12 Providing and fixing Health Faucet ABS with double lock 1.2 m long 8mm

203 dia and SS flexible hose and wall hook including CP flange. 15mm dia. No. 4 1891.69 7566.76

1.13 Providing and fixing first quality white vitreous china under counter

washbasins, specially fabricated CI / MS brackets, painted with two or

three coats of enamel paint of approved shade over a coat of primer, 32

mm CP brass waste fitting , pipe to wall with CP brass flange and rubber

adopter for waste connection complete including filling gap between

counter and wash basin with approved type poly sulphide sealant,

cutting and making good the walls wherever required.

204 1.13.1 White vitreous china wash basin. No. 6 5225.82 31354.92

1.14 Providing and fixing CP BRASS towel ring complete with brackets fixed

to wooden cleats with CP brass screws with concealed fittings

arrangement of approved quality and colour.

206 1.15 Providing and fixing Coat Hook: each 6 573.35 3440.10

1.16 Providing and fixing of Soap Dispenser with all accessories as required

and making good the walls wherever required.

1.17 Providing and fixing white vitreous china battery based infrared sensor

operated urinal of approx. size 375 x 315 x 620mm with sensor having

pre & post flushing with water (250 ml & 500 ml consumption), having

208 water inlet from back side, including fixing to wall with suitable brackets No. 4 24205.31 96821.24

all as per manufacturers specification and direction of Engineer-in-

1.18 Providing and fixing solid state, sensor based fully hygienic hand drier

of approved shade with single blower, with time delay, summer &

winter control, music while drying, volume ON/OFF controls including

providing necessary brackets, cable from drier to Plug, Plug top key and

lock etc, complete as required.

1.20 Providing and fixing C.P Brass hose bib tap for grarden and AHU Area

with all complete plugs etc.

1.21 Providing and fixing electric individual type gyser with all complete

connections etc. (for pantry/VIP & Staff toilet)

211 1.21.1 3 liters (instant heating type) each 1 3472.00 3472.00

2.1 Providing and fixing on wall face uplasticised Rigid PVC rain water pipes

conforming to IS 13592 Type A including jointing with steel ring

conforming to IS 5382 leaving 10 mm gap for thermal expansion (i)

single socketed pipes.

2.2 Providing and fixing on wall face unplasticised - PVC moulded fittings/

accessories for unplasticised Rigid PVC rain water pipes conforming to IS

: 13592 Type A, including jointing with seal ring conforming to IS : 5382,

leaving 10 mm gap for thermal expansion.

2.2.1 Single pushfit Coupler

SOR 2017/ M.R. ITEMS

S.No. DESCRIPTION UNIT QTY. RATE SOR AMOUNT

M.R. ITEMS AMOUNT

2.2.2 Shoe (Plain)

2.2.3 Single pushfit Coupler

2.2.4 Shoe (Plain)

2.3 Providing and fixing to the inlet mouth of rain water pipe cast iron

218 grating 15 cm diameter and weighing not less than 440 grams. No. 10 282.20 2822.00

2.4 Making khurras 45x45 cm with average minimum thickness of 5 cm

cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone

aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400

219 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse each 12 238.63 2863.56

sand) and a coat of neat cement, rounding the edges and making and

finishing the outlet complete

3.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all

CPVC plain & brass threaded fittings, including fixing the pipe with

clamps at 1.00 m spacing. This includes jointing of pipes & fittings

with one step CPVC solvent cement and testing of joints complete

as per direction of Engineer in Charge.

Internal work - Exposed on wall and terrace

220 3.1.2 25mm dia nominal bore meter 14 513.39 7187.46

221 3.1.3 32mm dia nominal bore meter 48 553.67 26576.16

222 3.1.4 40 mm dia nominal bore meter 38 690.41 26235.58

223 3.1.5 50 mm dia nominal bore meter 40 921.13 36845.20

3.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having

thermal stability for hot & cold water supply, including all CPVC plain &

brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing.

This includes jointing of pipes & fittings with one step CPVC solvent

cement and the cost of cutting chases and making good the same

including testing of joints complete as per direction of Engineer in

Charge. (Concealed work, including cutting chases and making good the

224 3.2.1 15 mm nominal outer dia Pipes meter 101.85 614.80 62617.38

225 3.2.2 20 mm nominal outer dia Pipes meter 23.1 670.15 15480.47

226 3.2.3 25 mm nominal outer dia Pipes meter 14 732.86 10260.04

3.3 Providing and fixing uplasticized connection pipe with brass union:

3.3.1 45 cm length

3.7 Providing and fixing C.P. brass angle valve for basin mixer and geyser

points of approved quality conforming to IS:8931

3.8 Providing and fixing nitrile rubber insulation and proprietary polyshield

outer mechanical protection ON nitrile rubber insulation comprising of

wrapping with poly glass tape helically wound and subsequently

applying 2 coats of polyshield material (resin & hardner) as per

manufacturers specification and approved by Project Manager /

229 3.8.1 15 mm dia. nominal bore (13mm thickness) meter 10 83.35 833.50

SOR 2017/ M.R. ITEMS

S.No. DESCRIPTION UNIT QTY. RATE SOR AMOUNT

M.R. ITEMS AMOUNT

3.9 Providing & fixing full way lever operated Brass ball valve of brass body

conforming to IS 778 with threaded / flanged joints (PN 16) complete

with nuts, bolts, gaskets, washers and fixing to supports etc.(PN 16)

3.11 Providing and fixing in position of approved quality high pressure

rated Gun Metal Float Valve with copper ball float and brass rods of

required length of the following sizes:

3.12 Providing and fixing five layer PVC material domestic water tank as

per manufacturers specification and approved by Project Manager /

4.1 Supply, installation, jointing and testing uPVC pipe class B (I.S.13592)

(SWR drainage system) including injection moulded fittings with bosses

where required e.g, w.c. connectors, door or plain tees / bends, PVC

pipe clamps, cowls, etc., wherever required, jointing the pipes and

fittings with rubber rings cuttings and making good the walls and floors

as required at site for vertical and horizontal soil waste and vent pipes

(Vent and antisyphonage pipes may be solvent welded). (Note : 110mm

OD pipe for Horizontal/Vertical Connection in toilet Soil & waste and

75mm OD pipe only for vertical vent pipe)

4.2 Supply, installation, jointing and testing uPVC pipe 6 Kg/sqcm class III (IS

4985-1983) including injection moulded fittings with bosses where

required e.g. tees, bends, plugs, clamps, couplings and adapters and

jointing with PVC cement solvent adhesive approved by fittings

manufactures including cutting and making good the walls and floors as

required at site.(Note : 40mm OD pipe for vertical connection in wash

basin, 50mm OD pipe horizontal pipe from wash basin to Flow Trap and

63 mm OD pipe from Flow Drain to Flow Trap connection in Horizontal

4.3 Supply, installation, jointing and testing uPVC P-Trap of 125x110 mm.

including the cost of PVC fabricated inlet fitting (height raiser) of

required length with PVC sockets weld to it for making branch

connections from wash basin, sink, floor drains etc., as shown on the

drawings including making the joint with cement rubber ring or solvent/

weld joints to trap.

4.4 Supply, installation, jointing and testing PVC clean out plug made out of

uPVC bend , PVC pipe piece, threaded PVC socket with minimum 100

mm brass threaded cap, suitable insert keys for opening, including

making joint to PVC main line as required complete in all respects.

4.5 Providing and fixing heavy type stainless steel jali, stainless steel frame

with or without lid for floor drains and floor traps, set in cement mortar

including cutting and making good the floor.

240 4.5.2 125 mm dia over floor traps No. 16 630.28 10084.48

SOR 2017/ M.R. ITEMS

S.No. DESCRIPTION UNIT QTY. RATE SOR AMOUNT

M.R. ITEMS AMOUNT

7.1 Supply of wall hanging drinking online water cooler with bottle filler

facility, made by stainless steel top and heavy duty galvanized steel

frame. With cooling capacity, ADA Compliant, size 472 mm Depth X

447mm width, flexible bubbler guard , operated between 50 to 120 PSI,

Chiller unit Suitable to R134a Refrigerant, Adjustable thermostat

control, suitable for 220-230v/50-60 hz A/C Supply Complete with all

accessories which include MD-CU29, which is an EPA registered

241 antimicrobial copper that fights off microorganisms which include MRSA Each 1 106433.17 106433.17

and e-coli. The water Fountain shall possess NSF-USA, Green building,

energy star saving certification, and to be placed at different location of

building. installing the Water Fountain for proper functioning and

aesthetic view as directed by the engineer-in-charge without any extra

7.2 Neo sense Filter-10” X 2.5” Dia, Resin filter-10” X 2.5” Dia, Carbon Filter-

10” X 2.5 “ Dia, Activated Carbon Block Filter, Booster Pump To

Pressurize 300 GPD –2 Nos, Membrane 300 GPD – 2 Nos, Pressure

Meter-1 Nos, Auto Flushing Solenoid Valve -1 Nos, Production Rate-Up

to 50-60 Lph. Feed Water 1000 ppm. Max. (Raw Water) Recovery Appx.

242 60%, Power Consumption 24 Volt DC -1 Nos Each 1 79460.35 79460.35

60 ltr pressure tank Pressure wave enclosed tank Single diaphragm, NSF

Certified, virgin polypropylene liner, tow part polyurethane, epoxy

primed paint finish, leak free, o ring sealed air valve cap. UV Light Alfa

7.3 Fixing of CP Brass sink mixer for pantry sink with wall flange, extended

operating lever, swinging spout and surgical purpose handle complete

with all accessories as required and making good the walls wherever

5.1 Excavating trenches of required width for pipes, cables, etc including

excavation for sockets, and dressing of sides, ramming of bottoms,

depth upto 1.5 m, including getting out the excavated soil, and then

returning the soil as required, in layers not exceeding 20 cm in depth,

including consolidating each deposited layer by ramming, watering, etc.

and disposing of surplus excavated soil as directed, within a lead of 50 m

5.1.1 Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia.

5.2 Earth work in excavation by mechanical means (Hydraulic excavator) /

manual means in foundation trenches or drains (not exceeding 1.5 m in

width or 10 sqm on plan), including dressing of sides and ramming of

bottoms, lift upto 1.5 m, including getting out the excavated soil and

disposal of surplus excavated soil as directed, within a lead of 50 m.

245 5.2.1 All kinds of soil cum 95 189.67 18018.65

5.3 Providing and laying cement concrete 1:5:10 mix (1 cement: 5

coarse sand: 10 graded stone aggregate 40 mm nominal size) upto

haunches for pipes including bed concrete as per standard design.

5.4 Providing and fixing square-mouth S.W. gully trap class SP-1 complete

with C.I. grating brick masonry chamber with water tight C.I. cover with

frame o f 300 x300 mm size (inside) the weight of cover to be not less

than 4.50 kg and frame to be not less than 2.70 kg as per standard

5.4.1 100 x 100 mm size P type (with common burnt clay F.P.S (non modular)

Bricks of class designation 7.5

SOR 2017/ M.R. ITEMS

S.No. DESCRIPTION UNIT QTY. RATE SOR AMOUNT

M.R. ITEMS AMOUNT

5.5 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with

collars jointed with stiff mixture of cement mortar in the proportion of

1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :

5.6 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4

coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse

sand : 4 graded stone aggregate 20 mm nominal size), foundation

concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate

40 mm nominal size), inside plastering 12 mm thick with cement mortar

1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement

and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand

: 4 graded stone aggregate 20 mm nominal size) finished with a floating

coat of neat cement complete as per standard design :

5.6.1 Inside size 90x80 cm and 45 cm deep including C.I. cover with frame

(light duty) 455x610 mm internal dimensions, total weight of cover and

frame to be not less than 38 kg (weight of cover 23 kg and weight of

251 5.6.1.1 With Sewer bricks conforming to IS : 4885 No. 7 12831.72 89822.04

5.7 Extra for depth for manholes :

5.7.1 Size 90x80 cm

252 5.7.2 With Sewer bricks conforming to IS : 4885 3 8437.84 25313.52

5.8 Providing orange colour safety foot rest of minimum 6 mm thick plastic

encapsulated as per IS : 10910, on 12 mm dia steel bar Conforming to IS:

1786, having minimum cross section as 23 mmx25 mm and over all

minimum length 263 mm and width as 165 mm with minimum 112 mm

space between protruded legs having 2 mm tread on top surface by

ribbing or chequering besides necessary and adequate anchoring

projections on tail length on 138 mm as per standard drawing and

253 suitable to with stand the bend test and chemical resistance test as per No. 30 620.03 18600.90

specifications and having manufacture’s permanent identification mark

to be visible even after fixing, including fixing in manholes with

30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6

graded stone aggregate 20 mm nominal size) complete as per design.

510 Constructing masonry Chamber 30x30x50 cm inside, in brick work in

cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I.

surface box 100x100 x75 mm (inside) with hinged cover fixed in cement

concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone

aggregate 20 mm nominal size), i/c necessary excavation, foundation

concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate

40mm nominal size ) and inside plastering with cement mortar 1:3 (1

cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat

cement complete as per standard design :

5.10.1 With common burnt clay F.P.S.(non modular) bricks of class designation

6.1 Boring/drilling bore well of required dia for casing/ strainer pipe, by

suitable method prescribed in IS: 2800 (part I), including collecting

samples from different strata, preparing and submitting strata

chart/bore log, including hire & running charges of all equipment's,

tools, plants & machineries required for the job, all complete as per

direction of Engineer –in-charge, upto 90 metre depth below ground

SOR 2017/ M.R. ITEMS

S.No. DESCRIPTION UNIT QTY. RATE SOR AMOUNT

M.R. ITEMS AMOUNT

6.2 Supplying, assembling, lowering and fixing in vertical position in bore

well, unplasticized PVC medium well casing (CM) pipe of required dia,

conforming to IS: 12818, including required hire and labour charges,

fittings & accessories etc. all complete, for all depths, as per direction of

Engineer –in-charge.

256 6.2.1 200 mm nominal size dia. Metre 50 1193.98 59699.00

6.3 Supplying, assembling, lowering and fixing in vertical position in bore

well unplasticized PVC medium well screen (RMS) pipes with ribs,

conforming to IS: 12818, including hire & labour charges, fittings &

accessories etc. all complete, for all depths, as per direction of Engineer-

257 6.3.1 200 mm nominal size dia. Metre 50 1272.10 63605.00

6.4 Supplying, filling, spreading & levelling stone boulders of size range 5 cm

to 20 cm, in recharge pit, in the required thickness, for all leads & lifts,

all complete as per direction of Engineer-in-charge.

6.5 Supplying, filling, spreading & levelling gravels of size range 5 mm to 10

mm, in the recharge pit, over the existing layer of boulders, in required

thickness, for all leads & lifts, all complete as per direction of Engineer-

6.6 Supplying, filling, spreading & levelling coarse sand of size range 1.5 mm

to 2 mm in recharge pit, in required thickness over gravel layer, for all

leads & lifts, all complete as per direction of Engineer –in-charge.

6.7 Gravel packing in tube well construction in accordance with IS: 4097,

including providing gravel fine/ medium/ coarse, in required grading &

sizes as per actual requirement, all complete as per direction of Engineer-

6.8 Providing and fixing Bail plug/ Bottom plug of required dia to the

bottom of pipe assembly of tube well as per IS:2800 (part I).

6.9 Providing and fixing in position pre-cast R.C.C. manhole cover and frame

of required shape and approved quality

263 6.9.1 Circular shape 560 mm internal diameter Each 1000 0.11 110.00

Total 690477.28

Wiring for light point/fan point /exhaust fan point with 1.5 sq.mm FR

PVC Insulated copper conductor single core cable in surface/

recessed PVC conduit, with modular switch ,modular plate, suitable

GI box and earthing the point with 1x1.5 sq.mm FR PVC insulated

copper conductor single core cable earthing as required.

Wiring for group controlled (looped) light point (without independent

switch etc.) with 1.5 sq. mm FR PVC insulated copper conductor

single core cable in surface/ recessed PVC conduit, and earthing the

point with 1.5 sq. mm FR PVC insulated copper conductor single core

cable etc. as required.

Wiring for twin control light point with 1.5 sq.mm FR PVC insulated

copper conductor single core cable in surface/ recessed medium

class pvc conduit, 2way modular switch, modular plate, suitable GI

box and earthing the point with 1.5 sq.mm. FR PVC insulated copper

conductor single core cable etc as required.

SOR 2017/ M.R. ITEMS

S.No. DESCRIPTION UNIT QTY. RATE SOR AMOUNT

M.R. ITEMS AMOUNT

Wiring for Power plug with 2X4 sq.mm FR PVC Insulated copper

conductor single core cable in surface/ recessed medium class PVC

267 M.R. conduit along with 1x4 sq mm FRLS PVC insulated copper METER 1020 122.80 111831.00

conductor single core cable for loop earthing as required.

Wiring for light plug Wiring with 2x2.5 sq.mm FR PVC Insulated

copper conductor single core cable in surface/ recessed medium

268 M.R. class PVC conduit along with 1no. 2.5 sq.mm fr pvc insulated copper METER 730 95.76 62415.00

conductor single core cable for loop earthing as required.

Wiring for CIRCUIT/SUB MAIN Wiring along with earth wire with the

following sizes FR PVC Insulated copper conductor single core cable

in surface/ recessed medium class PVC conduit as required.

Wiring for CIRCUIT/SUB MAIN Wiring along with earth wire with the

following sizes FR PVC Insulated copper conductor single core cable

in surface/ recessed medium class PVC conduit as required.

Wiring for CIRCUIT/SUB MAIN Wiring along with earth wire with the

following sizes FR PVC Insulated copper conductor single core cable

in surface/ recessed medium class PVC conduit as required.

Wiring for CIRCUIT/SUB MAIN Wiring along with earth wire with the

following sizes FR PVC Insulated copper conductor single core cable

in surface/ recessed medium class PVC conduit as required.

Supply and fixing of following sizes of medium class PVC conduit

along with accessories in surface / recess including cutting the wall

and making good the same in case of recess conduit as required

Supply and fixing suitable size GI box with modular plate and cover

in front on surface or in recess, including providing and fixing 3pin

5/6 A Modular socket outlet and 5/6 A modular switch, connections

etc as required.

Supply and fixing suitable size GI box with modular plate and cover

in front on surface or in recess, including providing and fixing 6pin

5/6& 15/16 A Modular socket outlet and 15/16 A modular switch,

connections etc as required.

Providing and fixing following rating and breaking capacity and pole

MCCB with thermomagnetics realse and terminal spreader in existing

cubical panel board including drilling holes in cubical panel making

connexion etc. as required

Supply and fixing following rating double pole 240 vols isolator in

existing MCB DB complete with connection testing and

commissioning etc, required

Supply and fixing following rating FOUR pole 415 vols isolator in

existing MCB DB complete with connection testing and

commissioning etc, required

Supply and fixing 5A to 32A rating 240/ 415 v 10 ka 'c curve'

miniature circuit breaker suitable for inductive load of following poles

in existing MCB DB complete with connections treating and

commissioning etc. as required. AND COMPLETE WITH

CONNECTION TESTING AND COMMISSIONING ETC. AS REQUIRED

Supply and fixing following rating double pole ( single phase and

neutral ) 240 v residual current circuit breaker (RCCB) having senility

current 100 ma in existing MCB DB complete with connection testing

and cohhissioning etc. as required. FOR UPS DB

SOR 2017/ M.R. ITEMS

S.No. DESCRIPTION UNIT QTY. RATE SOR AMOUNT

M.R. ITEMS AMOUNT

Supply and fixing following rating four pole ( three phase and neutral

) 415 v residual current circuit breaker (RCCB) having senility current

100 ma in existing MCB DB complete with connection testing and

cohhissioning etc. as required.

Supply and fixing following way ,single pole and neutral , sheet steel,

MCB distribution board , 240v , on surface / recess, complete with

tinned copper bus bar, neutral bus bar, earth bar, din bar,

interconnections, powder paint including earthing e.t.c as required

(But without MCB/RCCB/Isolator)

Supply and fixing following way ,horizontal type three pole and

neutral , sheet steel, MCB distribution board , 415v , on surface /

recess, complete with tinned copper bus bar, neutral bus bar, earth

bar, din bar, interconnections, powder paint including earthing e.t.c

as required (But without MCB/RCCB/Isolator)

293 4WAY SINGLE PHASE DOUBLE DOOR EACH 1 1699.04 1517.00

294 12WAY SINGLE PHASE DOUBLE DOOR EACH 1 2596.16 2318.00

Supply and fixing following way ,horizontal type three pole and

neutral , sheet steel, MCB distribution board , 415v , on surface /

recess, complete with tinned copper bus bar, neutral bus bar, earth

bar, din bar, interconnections, powder paint including earthing e.t.c

as required (But without MCB/RCCB/Isolator)

295 M.R. 8 WAY TPN DB DOUBLE DOOR EACH 5 2902.88 12959.29

Supply and fixing Cable End Box ( Loose wire box)(IP43) SUITABLE

FOR FOLLOWING SINGLE POLE AND NEUTRAL SHEET STEEL MCB

distribution board 240 V on surface , recess complete with testing

and commissioning etc. as required.

296 M.R. for 4/12 ways double door SPN MCB DB EACH 2 3710.64 6626.14

Supply and fixing Cable End Box ( Loose wire box)(IP43) SUITABLE

FOR TRIPLE POLE AND NEUTRAL SHEET STEEL MCB distribution

board415 V on surface , recess complete with testing and

commissioning etc. as required.

297 M.R. for 6/8ways double door TPN MCB DB EACH 5 5152.19 23000.86

Supply and drawing following pair 0.5sq.mm dia FR PVC INSULATED

ANNEALED COPPER CONDUCTOR UN ARMED TELEPHONE CABLE

in existing surface / recess steel/ PVC conduit as required

Laying of one number PVC insulated and PVC sheathed / XLPE

power cable of 1.1 KV grade of following size direct in ground

including excavation sand cushioning protective covering and

refilling the trench etc. as required

Laying of one number PVC insulated and PVC sheathed / XLPE

power cable of 1.1 kv grade of following size DIRECTLY IN GROUND

OR in the existing RCC/HNUME/METAL pipe as required

UP TO 120 SQ.MM ( MAIN CABLE FOR RECEIVING SUPPLY AND

from LT PANEL TO EXTERNAL UNITS AUDI. AND CONFERENCE,

LIFT ETC INCLUDING EXCAVATION IF REQUIRED..)

Supply and making end termination with brass compression gland

and aluminum lugs of following size of PVC insulated and PVC

sheathed / XLPE aluminum conductor cable of 1.1 kv grade as

Earthing with GI earth plate 600mmx600mmx6 mm including

accessories and providing masonry enclosure with cover plate

302 M.R. having locking arrangement and watering pipe of 2.7 m long with SET 4 3065.29 10947.48

schar coal/coke and salt as required

Providing and fixing 25x5 mm GI strip in 40 mm dia GI pipe from earth

electrode including connection with GI nuts , bolts, spring washer

excavation and refilling etc. as required

Providing and fixing 25x5 mm GI strip on surface or in recess for

connections etc as required.

SOR 2017/ M.R. ITEMS

S.No. DESCRIPTION UNIT QTY. RATE SOR AMOUNT

M.R. ITEMS AMOUNT

Supply installation of GI (hot depp galvanized) raceway of following

size laid in floor, including making chase making good the same. The

raceway shall include all junction boxes wherever required.

Supply installation testing & commissioning of floor mounted (on

base frame) totally enclosed and extensible type. The general

construction to confirm to I.S 2623-93. The design shall include all

provision for safety of operator and maintenance staff. Design of

protection -IP42. It shall be compartmentalized type having space and

arrangement for incoming cable, incoming switch gear, bus bar

(insulated). The CRCA sheet shall not be less than 2 mm thick or load

bearing member and 1.6 mm door of LT panel. Terminal block from

reputed firm like WAGO shall only be used. 2 number 20X3 mm

copper strip for LT panel up to 400 amp capacity shall be provided.

General layout shall be got approved before fabrication. The panel

shall comprise of following-

Incomer - 250 Amp MCCB 35 KA with O/L, S/C, E/L release. - 1 nos

Indicating lamp set

Multi function meter

BUSBAR 300A ALUMINUM

100 Amp 4P MCCB - 1 Nos

63 Amp 4P MCCB - 1 Nos

40 Amp 4P MCCB - 10 Nos

Spare outgoing - 4 Nos

note :cost of switches shall be paid separately BUT BUS BAR,

INDICATION LIGHT ETC. ARE INCLUSIVE

Supply installation testing commission of feeder pillar for outdoor

light. Feeder pillar made out of 2mm thick CRCA sheet load bearing

and remaining with 1.6 mm thick. Feeder pillar shall confirm to IP-54

(for outdoor application), and relevant IS code. It shall have 12 mm

thick backlight sheet for mounting of asseiores. Feeder pillar shall be

supported on MS angle frame with legs having clearance of 300 mm

from ground level. Inter-connection shall be made with solid copper

wire / strip sleeved. The feeder pillar should have the following-

1. Incoming 40 Amp 4P isolator

2. Bus bar 60 Amp copper 4 strips of equal size

308 M.R. 3. Outgoing 6/10 A DP MCB - 12 Nos EACH 1 9529.59 8508.56

SUPPLY OF FOLLOWING SIZE OF UNDER GROUND PVC INSULATED

XLPE CABLE ISI marked CONFIRMING TO IS: 7098 ( P1)/1988

309 M.R. 3.5X95SQ. MM ALU. ARM. CABLE ( MAIN CABLE ) METER 50 723.52 32300.00

3.5X35 SQ. MM ALU. ARM. CABLE ( FOR EXTERNAL A/C UNITS)

311 M.R. 4X6 SQ.MM COPPER (FOR LIFT) METER 20 318.08 5680.00

Supply and installation of following fixtures complete with

accessories as required-

22/33 W LED recessed light Philips RC365B LED22/33 - 5000 PSU OD

25 W LED Surface mounted light (TRIM CLIP ON LED PANEL 24 W

3000 K) LHEAABP5IL1W024

314 M.R. 18 W LED surface mounted light BAJAJ BZSLO 12W WH EACH 26 1530.40 35527.18

315 MR 9 W LED SURFACE LIGHT NW EACH 26 1344.00 31200.00

316 M.R. 9 W LED mirror light BCLSB 9W NW EACH 2 1456.00 2600.00

10W LED DOWN LIGHT(Philips Aura Plus 10-Watt Recessed LED

Down Light (Warm Light, Round))

318 M.R. 14w led WALL BRACKET LED fixture EACH 4 824.06 2943.08

18w led ULTRA SLIM ROUND TUBE LIGHT WALL mounted LED

fixture make similar to HAVELLS LHEXBLP7UN1W018

10 w led UP/down light WALL mounted fixture (Glitz Weather Proof

320 M.R. 10W LED Outdoor Up-Down Facade Light (Cool White, 6000k, IP65) EACH 4 1466.44 5237.27

FLOOD LIGHT 30W LED FIXED WITH BREAKET ON WALL (Oreva

ORFLD-30W-1 30-Watt LED Flood Light (White))

SOR 2017/ M.R. ITEMS

S.No. DESCRIPTION UNIT QTY. RATE SOR AMOUNT

M.R. ITEMS AMOUNT

PROVIDING AND FIXING OF AIR CIRCULATORS/WALL FANS (

322 M.R. ALMONARD 24" 600MMON WALL INCLUDING FIXING OF STEEL EACH 4 6602.40 23580.00

FASTENERS AS REQUIRED

323 M.R. WALL FAN(Havells Swing 400mm Wall Fan (Off White)) EACH 22 2699.93 53034.37

SUPPLY AND INSTALLATION OF CEILING FAN Bajaj Edge HS 1200

mm Ceiling Fan Opal White

SUPPLY AND FIXING OF BRICK LIGHT INCLUDING CHASE IN Wall

AND MAKIN GOOD THE SAME

SUPPLY AND FIXING OF BULK HEAD LIGHT COMPLETE IN ALL

BUILDING ELECTRICAL WORKS ESTIMATE 1365649.79

1 CHAPTER 1 : FIRE PUMPS AND ACCESSORIES

Supplying, installation, testing and commissioning of electric driven

terrace pump suitable for automatic operation and consisting of

following, complete in all respects, as required: (Terrace Pump)

(a) Horizontal type, multistage, centrifugal, split casing pump of cast

iron body & bronze impeller with stainless steel shaft, mechanical

confirming to IS : 1520

b) Suitable HP squirell cage induction motor TEFC type suitable for

operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of

protection for enclosure, horiziontal foot mounted type with Class-'F'

insulation, conforming to IS-325.

(c) M.S.fabricated common base plate, coupling, coupling guard,

foundation bolts etc.as required.

(d) Suitable cement concrete foundation duly plastered and with anti

vibration pads.

Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS

sheet, 1200 mm in height with air release valve on top and flanged

connection to riser, drain arrangement with 25 mm dia gun metal wheel

valve with required accessories, pressure gauge and paintingwith

synthetic enamel paint of approved shade as required

Providing, fixing, testing & commissioning of dial type (100 mm)

pressure gauge (glycerin filled) with isolation ball valve suitable for

329 1.3 working pressure of 250 PSI with no Syphon. Cost shall be inclusive of No 6 8835.68 53014.08

providing any short pieces, nipples, elbows etc as required. (Range 0-16

Supply, installation , testing & commissioning of male/ female screwed

end full way lever operated forged brass ball valve(PN 16) of brass body

1.4 with brass ball & teflon seat tested to a pressure 24 Kg / sqcm with

(threaded joints) complete as required.

(Cost shall be inclusive of providing necessary union / flange connection).

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6

rating with bronze/gunmetal seat duly ISI marked complete with nuts,

bolts, washers, gaskets conforming to IS 13095 of following sizes as

Providing, installation, testing and commissioning of non-return valve of

following sizes confirming to IS: 5312 complete with rubber gasket, GI

bolts, nuts, washers etc.as required.

SOR 2017/ M.R. ITEMS

S.No. DESCRIPTION UNIT QTY. RATE SOR AMOUNT

M.R. ITEMS AMOUNT

Providing, fixing, testing and commissioning of spring loaded relief

valve suitable for pressure of 16 Kg / sq.cm with Body, cover of cast

steel, stem-stainless steel 304, seat and seal -EPDM, Body seat ring ,

1.7 nuts and bolts of stainless steel and including gasket, gland packing,

flanges conforming to IS 6392(PN 16) etc all as required to complete the

Providing, installation, testing and commissioning of stainless steel Y-

strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet

with 3 mm dia holes with stainless steel flange.

Providing & fixing heavy duty double flanged flexicon rubber expansion

joint (suitable for system test pressure) of standard length as per

1.9 manufacturers specs including rubber gaskets, flanges, nuts, bolts and

washers complete as required.

Providing, laying, testing & commissioning of 'C' class heavy duty MS

pipe conforming to IS 3589/IS 1239 including Welding, fittings like

elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe

on the wall/ceiling with suitable clamp/support frame and painting with

1.10 two or more coats of synthetic enamel paint of required shade complete

(For suction & delivery headers)

2 CHAPTER 2 : INTERNAL HYDRANT

Providing, laying, testing & commissioning of 'C' class heavy duty MS

pipe conforming to IS 3589/IS 1239 including Welding, fittings like

elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe

on the wall/ceiling with suitable clamp/support frame and painting with

2.1 two or more coats of synthetic enamel paint of required shade complete

For wet riser/down comer System – MS `C' Heavy class pipe

Supply, installation , testing & commissioning of male/ female screwed

end full way lever operated forged brass ball valve(PN 16) of brass body

2.2 with brass ball & teflon seat tested to a pressure 24 Kg / sqcm with

(threaded joints) complete as required.

(Cost shall be inclusive of providing necessary union / flange connection).

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6

rating with bronze/gunmetal seat duly ISI marked complete with nuts,

bolts, washers, gaskets conforming to IS 13095 of following sizes as

Supplying and fixing single headed internal hydrant valve with

instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast

2.4 iron wheel ISI marked conforming to IS 5290 (Type -A) with blank

Gunmetal/Stainless Steel cap and chain as required.

341 2.4.1 Single headed Gunmetal No. 2 8077.10 16154.20

SOR 2017/ M.R. ITEMS

S.No. DESCRIPTION UNIT QTY. RATE SOR AMOUNT

M.R. ITEMS AMOUNT

Supplying and fixing first-aid Hose Reel with MS construction spray

painted in post office red, conforming to IS 884 complete with the

following as required. 20 mm nominal internal dia water hose

thermoplastic (Textile reinforced) type -2 as per IS: 12585. 20 mm

2.5 nominal internal dia gun metal globe valve & nozzle. Drum and brackets

for fixing the equipmets on wall. Connections from riser with 25 mm dia

stop gun metal valve & M.S. Pipe and socket.

Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia

2.6 male and female couplings duly bound with GI wire, rivets etc.

conforming to IS 636 (type-A) as required :

Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm

nominal internal diameter size nozzle conforming to IS 903 suitable for

instantaneous connection to interconnect hose pipe coupling as

Providing, fixing, testing & commissioning of standard firemans axe with

heavy rubber handle.

Providing and fixing M.S. fire hose shaft door with frame fabricated

from angle iron frame 40 x 40 x 6 mm thick, angle iron shutter 25 x 25 x 4

mm thick, 16 g M.S. sheet of fully welded construction with hinged

double front door with locking arrangement and butt hinges, 15 x 3 mm

lugs 10 cm long (6 Nos) embedded in cement conc. Blocks ( 1: 3: 6 mix) or

with rawl plug and screws/bolts and nuts as required, partly glass door 4

mm thick approved by local fire aurthority, painted with one coat of

346 2.9 primer, stove enamelled fire red finished, "Fire Hose" written on front, No. 2 18816.00 37632.00

suitable to accommodate 2 Nos single headed Hydrant landing valve, 1

fire hose reel, 2 nos.15m long 63mmdia hose,1-branch pipe, 1 fireman's

axe, including suitably mounted on a raised masonry

platform as required. (Approx.size 0.9m x 2.1m)

Supply, installation, testing and commissioning of following types of

2.10 extinguisher with provision of wall bracket (fixed with anchor fastner).

Providing & fixing ISI marked portable chemical fire extinguisher, water

(gas pressure) type capacity 9 litres with gun metal cap and nozzle and

complete in all respects including initial fill and wall suspension

Providing & fixing ISI marked portable CO2 type fire extinguisher type

4.5 kg capacity. Including valve, discharge hose of not less than 10 mm

dia & 1 M long complete in all respects including initial filled with CO2

348 2.10.2 gas & filled to a filling rate of not more than 0.667 and wall suspension 2 6998.88 13997.76

Providing & fixing of ABC Type, Potable Fire Extinguisher, dry powder

type (Gas Cartridge) with cylinder initially fully charged with dry

powder, ISI marked complete with standard discharge valve with tube,

CI bracket for wall mounting.

3 CHAPTER 3 : CONTROL PANEL

SOR 2017/ M.R. ITEMS

S.No. DESCRIPTION UNIT QTY. RATE SOR AMOUNT

M.R. ITEMS AMOUNT

Supply, installation testing and commissioning of following Direct on

line starter / Star-delta starters suitable for motors of air handling units/

Tertiary pumps of below mentioned capacities. The starter shall

comprise of all necessary power and control equipments including Auto

/ Manual selector switch, Start/stop push butons, LED indications, Star

contactor , delta contactor , timer relay contactor, electronic timer,

potential free NO/NC contacts and necessary control wirings properly

connected in fully usable state. Minimum utilization catagory for all

contactors shall be AC3 and contactor shall be capable to withstand the

steady state (full load) and starting inrush current. The starter shall have

3.1 necessary protection device (MPCB +EOCR) whose settings and ratings

shall be as per the type-2 co-ordination chart. The starter shall have

inbuilt protection against overcurrent, short circuit and single phasing.

All these starters shall be equipped with discharge resistors suitable for

making the starter run under the closed transition state. All below

mentioned starters shall be BMS compatible and additional contacts and

wiring required for BMS integration shall be provided.

2 x 5.5 kW Direct online starter, 12.5A TP 50kA, MPCB with OLR range 9-

351 3:01:01 12.5A SPP, 12A delta contactor with start, stop, on, off, trip & Each 1 39956.00 39956.00

auto/manual push buttons.

TOTAL OF FIRE SUPPRESSION 654040.84

Supply, installation, testing and commissioning of Variable

refrigerant flow/ Variable refrigerant volume type system with indoor

units including individual controller for cooling and heating type

operation. The quoted price should include all duties, Insurance FOR

site etc. as per specifications. [4 STAR RATING]

VRF/VRV outdoor

Supply of outdoor units equipped with highly efficient scroll

compressor with inverter type compressor, special acrylic coated

heat exchanger, low noise condenser fan, auto check function for

connection error, MS stand, having interconnected control wiring

between IDU ODU. Control panel and refrigerant piping housed in

compact housing duly powder coated complete as required for

trouble free operation, refrigerant should be R410A and as per

specifications. Installation, testing and commissioning of Variable

refrigerant flow/ Variable refrigerant volume type system with indoor

units including individual controller for cooling and heating type

operation. The quoted price should include all duties, insurance FOR

site etc. as per specifications.

352 M.R. 18 HP ODU with heat pump Each 1 431088.00 431088

Supply, installation testing and commissioning of indoor units

equipped with pre-filter, fan section with low noise fan, multispeed

motor, coil section with DX coil, outdoor cabinet, drain pan and drain

pump, cordless remote/wire control for ductable, cabling, vibration

isolation, earthing, necessary supports etc. as per specifications.

4 way cassette type unit of following capacity along with remote

controle/wall mounted casettes

SOR 2017/ M.R. ITEMS

S.No. DESCRIPTION UNIT QTY. RATE SOR AMOUNT

M.R. ITEMS AMOUNT

Refrigerant Piping for VRF/VRV system SITC of interconnecting

copper refrigerant pipe with Nitrile rubber with glass cloth faced

protection at expose side insulation between each set of indoor and

outdoor units as per specification, all piping inside the room shall be

properly supported with MS hanger and clamps and all external

piping with UV coating as per specification and drawing etc.

complete as required. Including y joint sets , distribution, heads, for

all indoor unit, including AHU, as per layout drawing ODU pipe

connection kit etc. complete as required

Refrigerent pipe sizes

355 M.R. 12.70 mm with 19mm thick Nitrile rubber insulation mtr 15 347.20 5208

356 M.R. 28.6 mm with 19mm thick Nitrile rubber insulation mtr 15 705.60 10584

357 M.R. 22.2 mm with 19mm thick Nitrile rubber insulation mtr 5 571.20 2856

358 M.R. 19.05 mm with 19mm thick Nitrile rubber insulation mtr 20 459.20 9184

359 M.R. 15.88 mm with 19mm thick Nitrile rubber insulation mtr 10 403.20 4032

360 M.R. 9.52 mm with 13mm thick Nitrile rubber insulation mtr 20 268.80 5376

Providing and fixing control cum transmission wiring of 3 core x 1.5

sqmm flexible copper conductor PVC insulated/PVC sheathed cable

in suitable conduit between indoor and outdoor unit along with other

refrigerant pipes etc. complete as reqd.

Fabrication, Supplying and fixing of angle iron stand in welded

construction made out of following sizes of MS angle iron complete

with painting one coat of red oxide primer and two coat of synthetic

enamel paint of approved brand etc. complete as reqd. for fixing

outdoor units for VRV/VRF system complete as required.

362 M.R. Size as per structural requirement Kg 60 100.80 6048

Supply of air cooled / split Acs unit with scroll comressors and

cordless remote control and as per specification of following

Complete with internal and external unit (4 star rating)

363 M.R. Cassatte type EACH 1 116256.00 116256

Cable for indoor and outdoor connection as required for split acs

Supply of automatic voltage stablizer of following capacity

Supply and fixing of CONDENSER DRAIN PIPE OF REQUIRED SIZE

368 M.R. COMPLETE AS REQUIRED AND AS PER SPEC. m 75 179.20 13440

Supply ERRECTION TESTING OF GSS DUCTING OF 24 G

(Circullar/Rectangullar)

SUPPLY AND FIXING OF GRILLS / DIFFUSERS WITH DAMPERS

COMPLETE AS REQUIRED

Supply and fixing treated fresh air unit of following capacity with

371 M.R. external unit, capacity complete in all respect inclusing control sqm 30 806.40 24192

wireing remote control etc.

Capacity 3.5 TR

Air flow 500 CFM

372 M.R. Static Pressure 80 Each 1 196000.00 196000

OTHER FURNITURE WORKS ESTIMATE

Thematic Gallery 1--Light,Reflection and Images

373 M.R. Fun Mirror - 4 exhibits No. 1 360080.00 360080

374 M.R. Uneasy Tunnel No. 1 248080.00 248080

375 M.R. Curving Tunnel No. 1 360080.00 360080

376 M.R. 3D Lenticulars No. 1 304080.00 304080

378 M.R. Twin Spherical mirror No. 1 393680.00 393680

379 M.R. Magnified Image No. 1 304080.00 304080

381 M.R. Video Spinner No. 1 292880.00 292880

382 M.R. 3 D Anamorphosis - II No. 1 326480.00 326480

383 M.R. Infinity Train No. 1 393680.00 393680

Thematic Gallery 2--Temporary Exhibition on Mineral

384 M.R. Minerals on Earth No. 1 134400.00 134400

SOR 2017/ M.R. ITEMS

S.No. DESCRIPTION UNIT QTY. RATE SOR AMOUNT

M.R. ITEMS AMOUNT

385 M.R. Minerals in India No. 1 134400.00 134400

386 M.R. Minerals of Odisha No. 1 134400.00 134400

388 M.R. Ores(with Specimen) No. 1 134400.00 134400

Thematic Gallery 3--Fun Science

391 M.R. Grand Shuttle No. 1 348880.00 348880

392 M.R. Jumping Disc No. 1 292880.00 292880

393 M.R. Levitating Dish No. 1 220080.00 220080

395 M.R. Planetary Motion No. 1 236880.00 236880

396 M.R. Infinity Well No. 1 460880.00 460880

397 M.R. Praxinoscope No. 1 203280.00 203280

398 M.R. Spinning Eraser No. 1 292880.00 292880

399 M.R. Pythagoras Theorem No. 1 292880.00 292880

400 M.R. Square & Star Wheel No. 1 236880.00 236880

401 M.R. Conic Sections No. 1 214480.00 214480

403 M.R. Acrobatic Stick No. 1 292880.00 292880

404 M.R. Persistence of Vision No. 1 281680.00 281680

405 M.R. Moire Pattern No. 1 292880.00 292880

Office Particulars

407 M.R. Dsktop Computer with 21.5'' LCD monitor No. 1 85120.00 85120.00

409 M.R. Desk Jet Printer Make HP:4729 No. 1 15092.00 15092.00

410 M.R. Testing and Commissioning No. 1 5600.00 5600.00

Conference Room Particulars

411 M.R. 55'' signage monitor Make: Benq No. 1 135374.40 135374.40

412 M.R. Dsktop Computer No. 1 85120.00 85120.00

414 M.R. Testing and Commissioning No. 1 5600.00 5600.00

Auditorium Particulars

415 M.R. PA Lectron System Make: Ahuja WSL 2500R No. 1 57668.80 57668.80

416 M.R. Microphone Make: Ahuja ACM 66 No. 2 3309.60 6619.20

417 M.R. Cordless Microphone Make: Ahuja AWM 700U2 No. 2 8377.60 16755.20

418 M.R. Cordless Microphone Make: Ahuja XR 80 No. 2 14156.80 28313.60

419 M.R. Microphone Stand Make : Ahuja BMS 101 No. 1 2077.60 2077.60

420 M.R. Microphone Stand Make : Ahuja AFS 201 No. 1 1657.60 1657.60

421 M.R. Vocal Microphone Make: AHUJA PRO2200SC No. 2 5325.60 10651.20

422 M.R. Sound Mixer Make:Ahuja AMX912 No. 1 18866.40 18866.40

423 M.R. Wall Speaker Make:Ahuja ASC 40T No. 2 5124.00 10248.00

424 M.R. PA amplifier Make: Ahuja TZA 4000 EM No. 1 36349.60 36349.60

425 M.R. PA amplifier Make: Ahuja SSA 160EM No. 1 18155.20 18155.20

426 M.R. Speaker Stand Make : Ahuja STA 100 No. 2 2452.80 4905.60

427 M.R. 200 watt Speaker Box Make: Ahuja SRX 200 No. 2 10315.20 20630.40

428 M.R. Digital voice recorder Make: Ahuja ADP30R No. 1 4688.32 4688.32

429 M.R. Audio Visual Equipment Rack Make: Custom Built No. 1 50400.00 50400.00

430 M.R. LED projector Make:Casio XJ F20XN No. 1 105134.40 105134.40

431 M.R. Tripod Screen Make:Custom Buit No. 1 7964.32 7964.32

432 M.R. Destop Computer No. 1 85120.00 85120.00

434 M.R. Testing and Commissioning No. 1 22400.00 22400.00

TOTAL 873641.44

SOR 2017/ M.R. ITEMS

S.No. DESCRIPTION UNIT QTY. RATE SOR AMOUNT

M.R. ITEMS AMOUNT

435 M.R. Auditorium chairs No. 40 3360.00 134400

Office, conference, information centre & other furnitures as per detail

SOR 2017/ M.R. ITEMS

S.No. DESCRIPTION UNIT QTY. SOR AMOUNT

M.R. ITEMS AMOUNT

SH: EARTH WORKS

A) Earth work in all kind of soil(Ordinary soil,Hard soil,& Stoney

earth) with initial lead and lift including rough dressing in layers not

437 E.W-1 exceeding 0.3m in depth and the Earth transported by transport Cum 814.45 189.73 154524.65

vehicles as directed by the Engineer-in-charge.

Cutting in disintegrated rock not requiring blasting to be removed by

pick axes and crow barsand depositing materials within 50m lead and

1.5m initial lift inluding rough dressing as per direction and

specification of the departement stacking useful materials separately

Extra lift or 1.5m or part there of over the initial lift of 1.5m in all kinds

E.W-5 of embankments and road works and ordinary earth work in general.

E.W-5A All kinds of soil

E.W-5B Ordinary or hard rock

Filling available excavated earth (excluding rock) in trenches,

plinth,sides of foundations etc. in layers not exceeding 20cm in

depth,consolidating each deposited layer by ramming and watering,

lead upto 50 m and lift upto 1.5 mincluding cost and conveyance of

all materials, water to work site, excluding seigniorage charges and

all operational, incidental, labour charges, etc. complete for finished

Filling in foundation and plinth with filling sand, watered and

rammed. including cost and conveyance of all materials, water to

444 E.W-7 work site, excluding seigniorage charges and all operational, Cum 141.80 379.85 53862.73

incidental, labour charges, etc. complete for finished item of work

Diluting and injecting chemical emulsion for POST-

E.W-10 CONSTRUCTIONAL anti-termite treatment (including the cost of

chemical emulsion) :

Along the external wall below concrete or masonry apron using

chemical emulsion @ 2.25 litres per linear metre including drilling

and plugging holes etc.: With Chlorpyriphosl Lindane E.C. 20% with

445 E.W-10b 1% concentration including all operational, incidental, labour metre 163.42 43.68 7138.19

charges, etc., complete for finished item of work.(Location:-Building

Periphery wall)

SOR 2017/ M.R. ITEMS

S.No. DESCRIPTION UNIT QTY. RATE SOR AMOUNT

M.R. ITEMS AMOUNT

Treatment of soil under existing floors using chemical emulsion @

one litre per hole, 300 mm apart including drilling 12 mm diameter

holes and plugging with cement mortar 1:2 (1 cement : 2 coarse

sand) to match the existing floor: With Chlorpyriphos/Lindane E.C.

20% with 1 % concentration including all operational, incidental,

labour charges, etc., complete for finished item of work. (Location;-

Treatment at points of contact of wood work by chemical emulsion

Chlorpyriphos / Lindane (in oil or kerosene based solution) @ 0.5

litres per hole by drilling 6mm dia holes at downward angle of 45

447 E.W-10d degree at 150 mm centre to centre and sealing the same including all Rmt 213.18 264.39 56362.66

operational, incidental, labour charges, etc., complete for finished

item of work. (Location:-Door Frame Alround areas.)

Providing, laying, spreading and compacting graded stone aggregate

(size range 53 mm to 0.075 mm ) to wet mix macadam (WMM)

specification including premixing the material with water at OMC in

for all leads & lifts, laying in uniform layers with mechanical paver

finisher in sub- base / base course on well prepared surface and

compacting with suitable means to achieve the desired density,

complete as per specifications and directions of Engineer-in-Charge.

SH: CONCRETE WORKS

Providing and laying in position cement concrete of specified

gradeexcluding the cost of centering and shuttering - All work up to

1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 40mm

449 C.W-1a Below of Brick foundation Cum 23.37 5408.65 126400.15

Providing and laying in position cement concrete of specified grade

excluding the cost of centering and shuttering - All work up to plinth

1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40mm

For Footings,Center raft&Retaining wall raft-(Below Ground Level)

Providing and laying damp-proof course 40mm thick with cement

451 M.R. concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone sqm 133.95 413.77 55424.49

aggregate 12.5mm nominal size)

Extra for providing and mixing water proofing material in cement

452 M.R. concrete work in doses by weight of cement as per manufacturer's 29.01 54.38 1577.56

Providing & applying a coat of residual petroleum bitumen of grade

of VG-10 of approved quality using 1.7kg per square metre on damp

453 M.R. proof course after cleaning the surface with brushes and finally with sqm 133.95 88.01 11788.94

apiece of cloth lightly soaked in kerosene oil.

Providing and laying in position ready mixed plain cement concrete,

with cement content as per approved design mix and manufactured

in fully automatic batching plant and transported to site of work in

transit mixer for all leads, having continuous agitated mixer,

manufactured as per mix design of specified grade for plain cement

concrete work, including pumping of R.M.C. from transit mixer to site

of laying and curing, excluding the cost of centering, shuttering and

finishing, including cost of curing, admixtures in recommended

proportions as per IS : 9103 to accelerate/ retard setting of concrete,

improve workability without impairing strength and durability as per

direction of the Engineerin- charge.

Note : 1) Excess/less cement used than specified in this item is

payable/recoverable separately.

All works upto plinth level :

M-15 grade plain cement concrete (cement content considered @ 240

SH: REINFORCED CEMENT CONCRETE WORK

SOR 2017/ M.R. ITEMS

S.No. DESCRIPTION UNIT QTY. RATE SOR AMOUNT

M.R. ITEMS AMOUNT

Reinforced cement concrete work in beams, suspended floors, roofs

having slope up to 15° landings, balconies, shelves, chajjas, lintels,

bands, plain window sills, staircases and spiral stair cases above

plinth level up to floor five level, excluding the cost of centering,

shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5

coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).

Centering and shuttering including strutting, propping etc. and

removal of form for :

Foundations, footings, bases of columns, etc. for mass concrete

Walls (any thickness) including attached pilasters, butteresses, plinth

and string courses etc.

Suspended floors, roofs, landings, balconies and access platform

458 M.R. Shelves (Cast in situ) Sqm 11.95 465.70 5565.12

Lintels, beams, plinth beams, girders, bressumers and cantilevers

460 M.R. Columns, Pillars, Piers, Abutments, Posts and Struts Sqm 2280.46 489.57 1116444.80

M.R. Stairs, (excluding landings) except spiral-staircases sqm 0.00 456.33 0.00

Extra for shuttering in circular work (20% of respective centering and

shuttering items)

Steel reinforcement for R.C.C. work including straightening, cutting,

bending, placing in position and binding all complete upto plinth

Thermo-Mechanically Treated bars of grade Fe-500D or more.

Steel reinforcement for R.C.C. work including straightening, cutting,

bending, placing in position and binding all complete above plinth

Thermo-Mechanically Treated bars of grade Fe-500D or more.

Add for plaster drip course/ groove in plastered surface or moulding

to R.C.C. projections.

Providing and laying in position machine batched and machine mixed

design mix M-25 grade cement concrete for reinforced cement

concrete work, using cement content as per approved design mix,

including pumping of concrete to site of laying but excluding the cost

of centering, shuttering, finishing and reinforcement, including

admixtures in recommended proportions as per IS: 9103 to

accelerate, retard setting of concrete, improve workability without

impairing strength and durability as per direction of Engineer-in-

(Note :- Cement content considered in this item is @ 330 kg/cum.

Excess/ less cement used as per design mix is payable/recoverable

464 M.R. All works upto plinth level Cum 296.26 6066.75 1797335.36

465 M.R. All works above plinth level upto floor V level Cum 486.89 6831.61 3326242.59

Brick work with common burnt clay F.P.S. (non modular) bricks of

class designation 7.5 in foundation and plinth in:

466 M.R. Cement mortar 1:6 (1 cement : 6 coarse sand) cum 189.88 3630.14 689290.98

Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars

at every third course of half brick masonry.

Brick work with fly ash bricks of 25cmx12cmx8cm size having

crushing strength not less than 75kg/cm2 with dimensional tolerance

+-2% compressive strength in super structure above plinth level up to

floor V level in :

Cement mortar 1:6 (1 cement : 6 Coarse sand)

469 M.R. Terrace Level Cum 21.84 5775.71 126141.51

Half brick masonry with non modular fly ash bricks of class

designation 10, conforming to IS : 12894, in super structure above

plinth and upto floor V level.

Cement mortar 1 : 4 (1 cement : 4 coarse sand)

SH: MARBLE & GRANITE WORK

SOR 2017/ M.R. ITEMS

S.No. DESCRIPTION UNIT QTY. RATE SOR AMOUNT

M.R. ITEMS AMOUNT

Marble work gang saw cut (polished and machine cut) of thickness

18 mm for wall lining (veneer work), backing filled with a grout of

average 12 mm thick in cement mortar 1:3 (1 cement : 3 coarse sand),

including pointing with white cement mortar 1:2 (1 white cement : 2

marble dust) with an admixture of pigment to match the marble shade

(To be secured to the backing by means of cramps, which shall be

paid for separately)

Raj Nagar Plain white marble/ Udaipur green marble/ Zebra

471 M.R. Area of slab over 0.50 sqm sqm 70.27 3118.91 219165.81

Providing and fixing 18 mm thick gang saw cut, mirror polished,

premoulded and prepolished, machine cut for kitchen platforms,

vanity counters, window sills, facias and similar locations of required

size, approved shade, colour and texture laid over 20 mm thick base

cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with

white cement, mixed with matching pigment, epoxy touch ups,

including rubbing, curing, moulding and polishing to edges to give

high gloss finish etc. complete at all levels.

Raj Nagar Plain white marble/ Udaipur green marble

472 M.R. Area of slab over 0.50 sqm Sqm. 18.08 1771.53 32029.26

Granite of any colour and shade

473 M.R. Area of slab over 0.50 Sqm. Sqm. 6.90 3270.96 22569.62

Providing edge moulding to 18 mm thick marble stone counters,

Vanities etc., including machine polishing to edge to give high gloss

finish etc. complete as per design approved by Engineer-in-Charge.

474 M.R. Granite work metre 11.51 251.76 2897.76

Extra for fixing marble /granite stone, over and above corresponding

basic item, in facia and drops of width upto 150 mm with epoxy resin

475 M.R. based adhesive, including cleaning etc. complete. metre 11.51 290.01 3338.02

Extra for providing opening of required size & shape for wash basin/

kitchen sink in kitchen platform, vanity counter and similar location

in marble/ Granite/ stone work, including necessary holes for pillar

etc. including moulding, rubbing and polishing of cut edges etc.

Stone tile (polished) work for wall lining over 12 mm thick bed of

cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @

3.3 kg/sqm including pointing in white cement complete.

477 M.R. Granite of any colour and shade. Sqm 46.72 2531.51 118272.00

Providing and fixing stone slab with table rubbed, edges rounded

and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal

partitions by cutting a chase of appropriate width with chase cutter

and embedding the stone in the chase with epoxy grout or with

cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone

aggregate 6 mm nominal size) as per direction of Engineer-in-charge

and finished smooth.

478 M.R. Granite stone of approved shade sqm 0.77 3140.13 2417.90

Designing, fabricating, testing, installing and fixing in position

Curtain Wall with Aluminium Composite Panel Cladding, with open

grooves for linear as well as curvilinear portions of the building , for

all heights and all levels etc. including:

(a) Structural analysis & design and preparation of shop drawings for

pressure equalisation or rain screen principle as required, proper

drainage of water to make it watertight including checking of all the

structural and functional design.

SOR 2017/ M.R. ITEMS

S.No. DESCRIPTION UNIT QTY. RATE SOR AMOUNT

M.R. ITEMS AMOUNT

(b) Providing, fabricating and supplying and fixing panels of

aluminium composite panel cladding in pan shape in metalic colour

of approved shades made out of 4mm thick aluminium composite

panel material consisting of 3mm thick FR grade mineral core

sandwiched between two Aluminium sheets (each 0.5mm thick). The

aluminium composite panel cladding sheet shall be coil coated, with

Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating

of approved colour and shade on face # 1 and polymer (Service)

coating on face # 2 as specified using stainless steel screws, nuts,

bolts, washers, cleats, weather silicone sealant, backer rods etc.

(c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot

Dip Galvanised with serrations and serrated washers to arrest the

wind load movement, fasteners, SS 316 Pins and anchor bolts of

approved make in SS 316, Nylon separators to prevent bi-metallic

contacts all complete required to perform as per specification and

drawing The item includes cost of all material & labour component,

the cost of all mock ups at site, cost of all samples of the individual

components for testing in an approved laboratory, field tests on the

assembled working curtain wall with aluminium composite panel

cladding, cleaning and protection of the curtain wall with aluminium

composite panel cladding till the handing over of the building for

occupation. Base frame work for ACP cladding is payable under the

relevant aluminium item.s The Contractor shall provide curtain wall

with aluminium composite panel cladding, having all the

performance characteristics all complete , as per the Architectural

drawings, as per item description, as specified, as per the approved

shop drawings and as directed by the Engineer-in-Charge. However,

for the purpose of payment, only the actual area on the external face

479 M.R. of the curtain wall with Aluminum Composite Panel Cladding sqm 578.47 4105.48 2374897.00

(including width of groove) shall be measured in sqm. up to two

decimal places.

SH: WOOD & PVC WORK/JOINERY

Providing wood work in frames of doors, windows, clerestory

windows and other frames, wrought framed and fixed in position with

M.R. hold fast lugs or with dash fasteners of required dia & length (hold

fast lugs or dash fastener shall be paid for separately).

480 Second class teak wood cum 0.85 100151.78 85129.01

M.R. Float glass panes

5.0 mm thick glass panes (weight not less than 12.5 kg per sqm)

Providing and fixing ISI marked flush door shutters conforming to IS

: 2202 (Part I) non-decorative type, core of block board construction

with frame of 1st class hard wood and well matched commercial 3 ply

veneering with vertical grains or cross bands and face veneers on

both faces of shutters:

35 mm thick including ISI marked Stainless Steel butt hinges with

necessary screws

Extra for providing lipping with 2nd class teak wood battens 25 mm

483 M.R. minimum depth on all edges of flush door shutters (over all area of sqm 57.30 416.64 23873.00

door shutter to be measured).

Extra for cutting rebate in flush door shutters (Total area of the

shutter to be measured).

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to

frame with 10 mm diameter bolts, nuts and wooden plugs and

485 M.R. embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 each 147 580.52 85267.00

cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal

Providing and fixing aluminium extruded section body tubular type

universal hydraulic door closer (having brand logo with ISi, IS : 3564,

embossed on the body, door weight upto 36 kg to 80 kg and door

width from 701 mm to 1000 mm), with double speed adjustment with

necessary accessories and screws etc. complete.

SOR 2017/ M.R. ITEMS

S.No. DESCRIPTION UNIT QTY. RATE SOR AMOUNT

M.R. ITEMS AMOUNT

Providing and fixing SS hanging floor door stopper ISI marked of

required colour and shade with necessary screws etc. complete.

487 M.R. Twin rubber stopper each 37 505.30 18554.62

Providing and fixing factory made P.V.C. door frame of size 50x47

mm with awall thickness of 5 mm, made out of extruded 5mm rigid

PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm

long brackets of 15x15 mm M.S. square tube, the vertical door frame

profiles to be reinforced with 19x19 mm M.S. square tube of 19

488 M.R. gauge, EPDM rubber gasket weather seal to be provided through out metre 57.83 384.72 22248.36

the frame. The door frame to be fixed to the wall using M.S. screws of

65/100 mm size, complete as per manufacturer’s specification and

direction of Engineerin- Charge.

Providing and fixing factory made panel PVC door shutter consisting

of frame made out of M.S. tubes of 19 gauge thickness and size of 19

mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S.

frame shall have a coat of steel primers of approved make and

manufacture. M.S. frame covered with 5 mm thick heat moulded PVC

'C' channel of size 30 mm thickness, 70 mm width out of which 50

mm shall be flat and 20 mm shall be tapered in 45 degree angle on

both side forming styles and 5 mm thick, 95 mm wide PVC sheet out

of which 75mm shall be flat and 20 mm shall be tapered in 45 degree

on the inner side to form top and bottom rail and 115 mm wide PVC

sheet out of which 75 mm shall be flat and 20 mm shall be tapered on

both sides to form lock rail. Top, bottom and lock rails shall be

provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide

cross PVC sheet be provided as gap insert for top rail & bottom rail,

paneling of 5 mm thick both side PVC sheet to be fitted in the M.S.

frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm)

thick x 15 mm wide PVC sheet beading on inner side, and joined

together with solvent cement adhesive. An additional 5 mm thick PVC

strip of 20 mm width is to be stuck on the interior side of the 'C'

Channel using PVC solvent adhesive etc. complete as per direction of

Engineer-in-charge, manufacturer's specification & drawing.

489 M.R. 30 mm thick plain PVC door shutters (PVC flush door) sqm 17.10 2440.10 41726.00

Extra for Providing & Fixing decorative high pressure laminated

sheet of plain / wood grain in gloss / matt / suede finish with high

density protective surface layer and reverse side of adhesive bonding

quality conforming to IS : 2046 Type S, including cost of adhesive of

approved quality.

Providing and fixing stainless steel ( Grade 304) railing made of

Hollowtubes, channels, plates etc., including welding, grinding,

buffing, polishing and making curvature (wherever required) and

fitting the same with necessary stainless steel nuts and bolts

complete, i/c fixing the railing with necessary accessories & stainless

steel dash fasteners , stainlesssteel bolts etc., of required size, on the

top of the floor or the side of waist slab with suitable arrangement as

per approval of Engineer-in-charge,( for payment purpose only

weight of stainless steel members shall be considered excluding

fixing accessories such as nuts, bolts, fasteners etc.).

Providing and fixing M.S. grills of required pattern in frames of

windowsetc. with M.S. flats, square or round bars etc. including

491 SW-2 priming coatwith approved steel primer all complete. Fixed to kg 5100.62 86.73 442376.77

openings /wooden frames with rawl plugs screws etc.

Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar,

bent to shape with hooked ends in R.C.C. slabs or beams during

492 M.R. laying, including painting the exposed portion of loop, all as per each 89 142.23 12658.47

standard design complete.

SH: FLOORING WORK

SOR 2017/ M.R. ITEMS

S.No. DESCRIPTION UNIT QTY. RATE SOR AMOUNT

M.R. ITEMS AMOUNT

Providing and laying for Flooring and skirting works with vitrified

floor tiles in different sizes (thickness to be specified by the

manufacturer) with water absorption's less than 0.08% and

confirming to IS : 15622 of approved make in all colours and shades,

laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand)

including grouting the joints with white cement and matching

pigments etc., complete.

Providing and laying Flooring & Skirting Works of Special

plain/printed series Glazed Ceramic floor tiles of size 400x400mm or

more (thickness to be specified by the manufacturer), of 1st quality

conforming to IS : 15622, of approved make, in all colours, shades,

FL-7&8 laid on 20 mm thick Cement Mortar1:4 (1 Cement : 4 Coarse sand),

including cost of tiles,cement,sand etc and fixing charges, pointing

the joints with white cement and matching pigments etc., complete

for finished item of work.

Providing and fixing wall Dadoing works of Ist quality ceramic glazed

wall tiles size 200x300mm or more (thickness to be specified by the

manufacturer), of 1st quality conforming to IS:15622 (thickness to be

specified by the manufacturer), of approved make,in all colours,

shades except burgundy, bottle green, black of any size asapproved

by Engineer-in-Charge, in skirting, risers of steps and dados,over 12

mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand)and

jointing with grey cement slurry @ 3.3kg per sqm, including pointing

in white cement mixed with pigment of matching shade complete. For

Toilet Areas (Upto Door height)

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded

stone aggregate) finished with a floating coat of neat cement,

including cement slurry, but excluding the cost of nosing of steps

496 M.R. 40 mm thick with 20 mm nominal size stone aggregate sqm 149.46 344.33 51463.56

52 mm thick cement concrete flooring with concrete hardener

topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2

coarse sand : 4 graded stone aggregate 20 mm nominal size) and top

layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement

hardener mix : 2 graded stone aggregate 6 mm nominal size) by

volume, hardening compound mixed @ 2 litre per 50 kg of cement or

as per manufacturer's specifications. This includes cost of cement

slurry, but excluding the cost of nosing of steps etc. complete.

Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1

cement : 3 coarse sand), finished with a floating coat of neat cement.

Providing and fixing glass strips in joints of terrazo/ cement concrete

499 M.R. 40 mm wide and 4 mm thick metre 1784.05 54.43 97105.84

Extra for pre finished nosing to treads of steps of marble stone.

Extra for granite flooring in treads of steps and risers using single

length up to 2.00 metre.

40 mm thick fine dressed stone flooring over 20 mm (average) thick

base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints

finished flush.

Providing and laying flamed finish Granite stone flooring including

skirting in required design and patterns, in linear as well as

curvilinear portions of the building all complete as per the

architectural drawings with 18 mm thick stone slab over 20 mm

(average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand)

laid and jointed with cement slurry and pointing with white cement

slurry admixed with pigment of matching shade including rubbing,

curing and polishing etc. all complete as specified and as directed by

the Engineer-in-Charge :

SOR 2017/ M.R. ITEMS

S.No. DESCRIPTION UNIT QTY. RATE SOR AMOUNT

M.R. ITEMS AMOUNT

Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown,

Cat Eye or equivalent.

Making khurras 45x45 cm with average minimum thickness of 5 cm

cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone

aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400

504 M.R. micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse each 11 166.87 1872.28

sand) and a coat of neat cement, rounding the edges and making and

finishing the outlet complete.

Providing and fixing false ceiling at all height including providing and

fixing of frame work made of special sections, power pressed from

M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both

side inclusive) as per IS : 277 and consisting of angle cleats of size 25

mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200

mm centre to centre, one flange fixed to the ceiling with dash

fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of

cleat fixed to the angle hangers of 25x10x0.50 mm of required length

with nuts & bolts of required size and other end of angle hanger fixed

with intermediate G.I. channels 45x15x0.9 mm running at the spacing

of 1200 mm centre to centre, to which the ceiling section 0.5 mm

thick bottom wedge of 80 mm with tapered flanges

of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre,

shall be fixed in a direction perpendicular to G.I. intermediate channel

with connecting clips made out of 2.64 mm dia x 230 mm long G.I.

wire at every junction, including fixing perimeter channels 0.5 mm

thick 27 mm high having flanges of 20 mm and 30 mm long, the

perimeter of ceiling fixed to wall/partition with the help of rawl plugs

at 450 mm centre, with 25mm long dry wall screws @ 230 mm

interval, including fixing of gypsum board to ceiling section and

perimeter channel with the help of dry wall screws of size 3.5 x 25

mm at 230 mm c/c, including jointing and finishing to a flush finish of

tapered and square edges of the board with recommended jointing

compound , jointing tapes , finishing with jointing compound in 3

layers covering upto 150 mm on both sides of joint and two coats of

primer suitable for board, all as per manufacturer's specification and

also including the cost of making openings for light fittings, grills,

diffusers, cutouts made with frame of perimeter channels suitably

fixed, all complete as per drawings, specification and direction of the

Engineer in Charge but excluding the cost of painting with :

Fully Perforated Gypsum Plaster Board of size 1200 x 2400x12.5 mm

having approx. 15 % perforated area with perforation size and pattern

as approved by the Engineerin- charge and as per manufacturer's

specification, with all 4 side tapered and backed by acoustical tissue

NRC value not less than 0.60

SH: FINISHING WORK

cement plastering 6 mm thick in single coat with CM (1:4)(1 Cement:4

Fine sand) and finished rough with sponge finishing including cost

and conveyance of all materials like cement, sand, water etc., to site,

Including seigniorage charges, sales & other taxes on all materials,

and all operational, incidental charges on materials and including

P.W-1 cost of all labour charges for mixing mortar, finishing, scaffolding, lift

charges, curing, including cutting Grooves as directed by Engineer -

in - charge etc., complete for RCC exposed faces for finished item of

work. for:-Ceiling & Beams Plastering

Plastering 12 mm thick in CM (1:6)(1 Cement:6 Coarse sand)

finished rough with sponge finishing including cost and conveyance

of all materials like cement, sand, water etc., to site, including

seigniorage charges, sales & other taxes on all materials, and all

operational, incidental charges on materials and including cost of all

labour charges for mixing mortar, finishing, scaffolding, lift charges,

curing, including cutting Grooves as directed by Engineer - in -

charge etc., complete for Internal Walls of Brick Wall and RCC

exposed faces for finished item of work.

SOR 2017/ M.R. ITEMS

S.No. DESCRIPTION UNIT QTY. RATE SOR AMOUNT

M.R. ITEMS AMOUNT

External Plastering 18 mm thick with Water proof compound in two

coats with base coat of 12mm thick in CM (1:5)(1 Cement: 5 Coarse

sand) and top coat of 6mm thick in CM (1:3)(1 cement:3 Fine sand)

finished rough with sponge finishing including cost and conveyance

of all materials like cement, sand, water etc., to site, including

seigniorage charges, sales & other taxes on all materials, and all

508 P.W-3 operational, incidental charges on materials and including cost of all sqm 589.13 367.51 216511.17

labour charges for mixing mortar, finishing, scaffolding, lift charges,

curing, including cutting Grooves as directed by Engineer - in -

charge etc., complete for External Walls of Brick Wall and RCC

exposed faces for finished item of work.

Applying one coat of water thinnable cement primer of approved

brand and manufacture on wall surface after thoroughly brushing

the surface to remove all dirt and remains of loose powdered

509 PAI-3 materials including cost of all materials, labour charges and sqm 3772.33 85.62 322986.89

incidental such as scaffolding, lift charges etc., complete for finished

item of work-For Internal walls

Wall painting with premium acrylic emulsion paint of interior grade,

having VOC (Volatile Organic Compound) Content less than 50

Grams/litre of approved brand and manufacture, including applying

additional coats wherever required to achieve even shade and colour

2 Coats-For Internal walls

Providing and applying white cement based putty of average

thickness1 mm, of approved brand and manufacturer, over the

plastered wallsurface to prepare the surface even and smooth

complete.-For Internal walls.

Providing wood work with Deluxe Multi surface Enamel paint of

requied shade. Two or more coat applied @ 0.90 ltr / 10 sqm over an

under coat of primer applied @ 0.75 ltr / 10 sqm of approved brand or

manufacture of required shade and colour complete, as per

manufacturer;s specification including cost of all materials, labour

charges and incidental such as scaffolding, lift charges etc.,

complete for finished item of work,- For Wood Doors doors

Painting Steel work with Deluxe Multi Surface Enamel Paint to give an

even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an

513 PAI-12 under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and sqm 122.64 113.52 13922.09

manufacture-For MS Grills and Steel works

15 mm cement plaster on the rough side of single or half brick wall of

Distempering with oil bound washable distemper of approved brand

515 MR and manufacture to give an even shade : sqm 2186.34 98.32 214960.95

MR Providing and applying external grade white cement bonded putty of

average thickness1 mm, of approved brand and manufacturer, over

516 the plastered wallsurface to prepare the surface even and smooth 202.46

complete.-For External facade

SH: ALUMINIUM WORK

Providing and fixing aluminium work for doors, windows, ventilators

and partitions with extruded built up standard tubular sections/

appropriate Z sections and other sections of approved make

conforming to IS: 733 and IS: 1285, fixing with dash fasteners of

required dia and size, including necessary filling up the gaps at

junctions, i.e. at top, bottom and sides with required EPDM rubber/

neoprene gasket etc. Aluminium sections shall be smooth, rust

free,straight, mitred and jointed mechanically wherever required

including cleat angle, Aluminium snap beading for glazing / paneling,

C.P. brass / stainless steel screws, all complete as per architectural

drawings and the directions of Engineer-in-charge. (Glazing, paneling

and dash fasteners to be paid for separately) :

For fixed portion

Powder coated aluminium (minimum thickness of powder coating 50

SOR 2017/ M.R. ITEMS

S.No. DESCRIPTION UNIT QTY. RATE SOR AMOUNT

M.R. ITEMS AMOUNT

For shutters of doors, windows & ventilators including providing and

fixing hinges/pivots/Sliding assessories and making provision for

fixing of fittings wherever required including the cost of EPDM

rubber / neoprene gasket required (Fittings shall be paid for

Powder coated aluminium (minimum thickness of powder coating 50

Providing and fixing glazing in aluminium door, window, ventilator

shutters and partitions etc. with EPDM rubber / neoprene gasket etc.

complete as per the architectural drawings and the directions of

engineer-in-charge . (Cost of aluminium snap beading shall be paid in

With float glass panes of 8 mm thickness (weight not less than 20 kg/

Filling the gap in between aluminium frame & adjacent RCC/ Brick/

Stone work by providing weather silicon sealant over backer rod of

approved quality as per architectural drawings and direction of

Engineer-in-charge complete.

520 M.R. Upto 5mm depth and 5 mm width Metre 132.09 73.29 9681.00

SH: NEW TECHNOLOGIES AND MATERIALS

Providing and fixing mineral fibre false ceiling tiles at all heights of

size 595X595mm of approved texture, design and pattern. The tiles

should have Humidity Resistance (RH) of 99%, Light Reflectance >

85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance

as per (BS 476 pt - 6 &7)in true horizontal level suspended on

interlocking T-Grid of hot dipped all round galvanized iron section of

0.33 mm thick (galvanized @120 gsm) comprising of main T runners

of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length

1200 mm and secondary intermediate cross T of size 15x32 mm of

length 600 mm to form grid module of size 600x600 mm suspended

from ceiling using galvanized mild steel item (galvanised@80gsm) 50

mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter

fully threaded hanger rod up to 1000 mm length and L-shape level

adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre

along main ‘T’. The system should rest on periphery walls /partitions

with the help of GI perimeter wall angle of size24x24X3000 mm made

of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl

plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws.

The exposed bottom portion of all T-sections used in false ceiling

support system shall be pre-painted with polyester baked paint, for

all heights. The work shall be carried out as per specifications,

drawings and as per directions of the engineer-incharge.

With 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC

NS: OTHER MARKET RATE (NON SCHEDULE) ITEMS

Laminated wooden planking, tongued and grooved in flooring,

522 M.R. including fixing with iron screws, all assessories like foam etc sqm 35.73 1642.14 58673.66

Providing and laying in position Carpet of approved make complete

523 M.R. in all respects as per manufacturers specification all complete and as sqm 123.54 1235.84 152675.67

per direction of Engineer-in-charge.

Providing and Fixing 304 grade Stainless Steel Toilet Grab Bar of

approved make, 19 mm diametre x 300 mm long (screws included) set

of 2-Rx915-2 (silver) all complete as per direction of Engineer-in-

Providing and fixing GI hexagonal chicken wire mesh of size 12mm x

22g at the junction of disimilar surfaces of brick masonry wall and

R C C column by beams and the like including necessary nails for

525 M.R. fixing etc, complete all as per specification and direction of Engineer - Sqm 422.73 55.70 23546.06

in -charge for all floor at all heights all complete as per direction of

Engineer-in-Charge.

Providing and application of SIKA TOPSEAL 109 Hi water proofing

526 M.R. works over terrace slab as per manufacturer's quotation all complete Sqm 1589.64 447.18 710855.22

SOR 2017/ M.R. ITEMS

S.No. DESCRIPTION UNIT QTY. RATE SOR AMOUNT

M.R. ITEMS AMOUNT

Providing and laying integral cement based water proofing treatment

including preparation of surface as required for treatment of roofs,

balconies, terraces etc consisting of following operations:

(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of

cement admixed with water proofing compound conforming to IS.

2645 and approved by Engineer-in-charge over the RCC slab

including adjoining walls upto 300 mm height including cleaning the

surface before treatment.

(b) Laying brick bats with mortar using broken bricks/brick bats 25

mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5

coarse sand) admixed with water proofing compound conforming to

IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer

of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with

water proofing compound conforming to IS : 2645 and approved by

Engineer-in-charge to required slope and treating similarly the

adjoining walls upto 300 mm height including rounding of junctions

of walls and slabs.

(c) After two days of proper curing applying a second coat of cement

slurry using 2.75 kg/ sqm of cement admixed with water proofing