Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.7 LAdmitted-Finance | ₹7.7 L | L1 | Admitted-Finance |
| 2 | L2₹8.7 L+₹1.0 L (13.6%)Admitted-Finance | ₹8.7 L+₹1.0 L (13.6%) | L2 | Admitted-Finance |
| 3 | L3₹10.0 L+₹2.3 L (29.3%)Admitted-Finance | ₹10.0 L+₹2.3 L (29.3%) | L3 | Admitted-Finance |
| 4 | L4₹12.6 L+₹4.9 L (63.1%)Admitted-Finance 7TH MILE UPPER SHILLONG P O NONGLYER SHILLONG MEGHALAYA | EAST KHASI HILLS | MEGHALAYA | 793009 | ₹12.6 L+₹4.9 L (63.1%) | L4 | Admitted-Finance |
| 5 | L5₹12.8 L+₹5.1 L (65.8%)Admitted-Finance | ₹12.8 L+₹5.1 L (65.8%) | L5 | Admitted-Finance |
| Sl No | Description | Qty | Unit | kapoor and co L4 | MAAN ENTERPRISES L5 | rajan builders L3 | PRASAD ENTERPRISE L2 | M/S SIMRAN WALIA ENTERPRISES L1 |
|---|---|---|---|---|---|---|---|---|
| 1.00 | Taking down cement or cement lime plaster, any description on brick or concrete surfaces of walls,ceiling etc and complete removal of lime wash if any ,including raking out joints, hacking for key, scrubbing down with water, etc completed all as specified. | 350 | Sqm | 35 ₹12,250 | 100 ₹35,000 | 10 ₹3,500 Lowest | 20 ₹7,000 | 25 ₹8,750 |
| 2.00 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surface finished fair& even in CM 1:4, complete all as specified and as directed | 200 | Sqm | 375 ₹75,000 | 300 ₹60,000 | 300 ₹60,000 | 270 ₹54,000 | 190 ₹38,000 Lowest |
| 3.00 | M&L 5mm thick cement plastering on ceiling in CM 1:3 over fair faces of concrete surfaces and rendering is to be finished fair & even complete all as specified and directed by engineer in charge . | 50 | Sqm | 340 ₹17,000 | 250 ₹12,500 | 320 ₹16,000 | 245 ₹12,250 | 150 ₹7,500 Lowest |
| 4.00 | M&L for Rendering 12 mm thick in cement mortar 1:6 on old/new brick or concrete surfaces of walls, finished fair & even complete all as specified and directed by Engr-in-charge. | 100 | Sqm | 380 ₹38,000 | 315 ₹31,500 | 275 ₹27,500 | 290 ₹29,000 | 180 ₹18,000 Lowest |
| 5.00 | M&L for chipping off/ taking down the spalled and old concrete from RCC members i.e RCC columns on internal surface for application of micrococrete upto three storey complete all as specified and directed by Engr-in-Charge . The follwing steps are to be followed -
i) Cleaning of rusted bars to be done with wire brushes or sand blasting till complete removal of rust ,after this coating of existing reinforcement bars shall be done by applying protective anti-corrosive zinc primer of fosroc or equivalent make with coverage as per technical specifications of manufacturer.
ii) Application of epoxy bonding agent on the surface before application of micro-concrete.
iii) Mechanical application of micro-cocrete material comprising of 10mm down graded aggregate chips to be mixed in a mechanical slow speed mixer . The mixed material shall be placed immediately in to the position, properly with out any time gap complete for an average thickness 25 mm including finishing the surface even and smooth, complete all as specified and directed by Engrs -In-Charge.
Note-
i) Work shall be executed by certifed applicator of approved make.
ii) Primer , bonding agent and micro- concrete matrial shall be of same make .
ii) Cost of scaffolding shall be included the qouted rate no extra amount will be paid for this .
Make :- Fosroc , Sika , Dr. Fixit . | 20 | Sqm | 1,250 ₹25,000 | 2,500 ₹50,000 | 2,500 ₹50,000 | 450 ₹9,000 Lowest | 2,800 ₹56,000 |
| 6.00 | M&L for chipping off/ taking down the spalled and old concrete from RCC members i.e RCC beams ,slabs on internal surface for application of micrococrete upto three storey complete all as specified and directed by Engr-in-Charge . The follwing steps are to be followed -
i) Cleaning of rusted bars to be done with wire brushes or sand blasting till complete removal of rust ,after this coating of existing reinforcement bars shall be done by applying protective anti-corrosive zinc primer of fosroc or equivalent make with coverage as per technical specifications of manufacturer.
ii) Application of epoxy bonding agent on the surface before application of micro-concrete.
iii) Mechanical application of micro-cocrete material comprising of 10mm down graded aggregate chips to be mixed in a mechanical slow speed mixer . The mixed material shall be placed immediately in to the position, properly with out any time gap complete for an average thickness 25 mm including finishing the surface even and smooth, complete all as specified and directed by Engrs -In-Charge.
Note-
i) Work shall be executed by certifed applicator of approved make.
ii) Primer , bonding agent and micro- concrete matrial shall be of same make .
ii) Cost of scaffolding shall be included the qouted rate no extra amount will be paid for this .
Make :- Fosroc , Sika , Dr. Fixit . | 30 | Sqm | 1,350 ₹40,500 | 3,000 ₹90,000 | 2,500 ₹75,000 | 450 ₹13,500 Lowest | 2,800 ₹84,000 |
| 7.00 | M&L for chipping off/ taking down the spalled and old concrete from RCC members i.e RCC Columns , facia , slab projection,chajjas etc on external surface for application of micrococrete upto three storey complete all as specified and directed by Engr-in-Charge . The follwing steps are to be followed -
i) Cleaning of rusted bars to be done with wire brushes or sand blasting till complete removal of rust ,after this coating of existing reinforcement bars shall be done by applying protective anti-corrosive zinc primer of fosroc or equivalent make with coverage as per technical specifications of manufacturer.
ii) Application of epoxy bonding agent on the surface before application of micro-concrete.
iii) Mechanical application of micro-cocrete material comprising of 10mm down graded aggregate chips to be mixed in a mechanical slow speed mixer . The mixed material shall be placed immediately in to the position, properly with out any time gap complete for an average thickness 25 mm including finishing the surface even and smooth, complete all as specified and directed by Engrs -In-Charge.
Note-
i) Work shall be executed by certifed applicator of approved make.
ii) Primer , bonding agent and micro- concrete matrial shall be of same make .
ii) Cost of scaffolding shall be included the qouted rate no extra amount will be paid for this .
Make :- Fosroc , Sika , Dr. Fixit . | 40 | Sqm | 1,450 ₹58,000 | 3,500 ₹1,40,000 | 2,500 ₹1,00,000 | 450 ₹18,000 Lowest | 2,800 ₹1,12,000 |
| 8.00 | Matenal and labour for preparation of newly plastered surface of wall including facias, slab projections and like and applying two coat of first quality premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay Technology ,Excellent Dirt Pick up resistance of Asian Paints Ltd or equivalent of other approved make with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1.79 tr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over two coat of acrylic water based exterior grade primer @ 0.9ltrundiluted)/10 sq mtrs diluted with water in 1:1ratio as per manufacture's instruction and all coats incl primer to be applied with fully automatic airless spray machine of paint application with a flow speed of minimum 1 Iitr per minute having a pressure of 3300 PSI along with application of exterior wallcare putty of 1mm thickness upto three storey all as specified and directed by engineer in charge .
Note :- Allow 6-8 hrs to dry the surface in subsequent coats of primer and distemper and including necessary scaffolding complete all specified and directed by Engr-in-Charge. | 240 | Sqm | 225 ₹54,000 | 150 ₹36,000 | 160 ₹38,400 | 220 ₹52,800 | 90 ₹21,600 Lowest |
| 9.00 | Material and labour for preparation of newly plastered wall surface etc to make the surface free from dust and make good smoothen surface by sand paper after application of wallcare putty of 1mm thickness and applying two coats of first quality Interior acrylic distemper of approved colour over a coat of primer of Asian Paints Ltd or equivalent of other approved make to be applied with fully automatic Electrically operated airless spray machine of paint application with a flow speed of minimum 1 It per minute having a pressure of 3000 PSI, upto three storey all as specified and directed by engineer in charge.
Note :- Allow 6-8 hrs to dry the surface in subsequent coats of primer and distemper and including necessary scaffolding complete all as specified and directed by Engr-in-Charge. | 120 | Sqm | 225 ₹27,000 | 160 ₹19,200 | 160 ₹19,200 | 195 ₹23,400 | 60 ₹7,200 Lowest |
| 10.00 | Material and labour for preparation of newly plastered of ceilings and like to make the surface free from dust and make good smoothen surface by sand paper after application of wallcare putty of 1mm thickness and applying two coats of first quality Interior acrylic distemper of approved colour over a coat of primer of Asian Paints Ltd or equivalent of other approved make to be applied with fully automatic Electrically operated airless spray machine of paint application with a flow speed of minimum 1 It per minute having a pressure of 3000 PSI, upto three storey all as specified and directed by engineer in charge.
Note :- Allow 6-8 hrs to dry the surface in subsequent coats of primer and distemper and including necessary scaffolding complete all as specified and directed by Engr-in-Charge. | 80 | Sqm | 235 ₹18,800 | 170 ₹13,600 | 160 ₹12,800 | 195 ₹15,600 | 75 ₹6,000 Lowest |
Tender Value
₹10.0 L
EMD Value
₹19,998
Closing Date
20 Aug 2026, 6:00 pmClosed
ASSISTANT GARRISON ENGINEER (I) AIR FORCE AMRITSAR
ASSISTANT GARRISON ENGINEER (I) AIR FORCE AMRITSAR-143001
SMART PERIODICALS SERVICES FOR VARIOUS BLDGS AT AF STN AMRITSAR
2026_MES_780644_1
AGE (I) AF/ASR/T-252026-27
Open Tender
Civil Works
Item Rate
120 days
ASSISTANT GARRISON ENGINEER (I) AF STN AMRITSAR
Class E and Category a(i)
8 documents required · 8 mandatory
₹500
AGE (I) AF AMRITSAR
₹19,998
27 Aug 2026
24 Jul 2026
27 Aug 2026
24 Jul 2026
20 Aug 2026
6 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Taking down cement or cement lime plaster, any description on brick or concrete surfaces of walls,ceiling etc and complete removal of lime wash if any ,including raking out joints, hacking for key, scrubbing down with water, etc completed all as specified. | - | Sqm | - | - |
| 2 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surface finished fair& even in CM 1:4, complete all as specified and as directed | 200 | Sqm | - | - |
| 3 | M&L 5mm thick cement plastering on ceiling in CM 1:3 over fair faces of concrete surfaces and rendering is to be finished fair & even complete all as specified and directed by engineer in charge . | 50 | Sqm | - | - |
| 4 | M&L for Rendering 12 mm thick in cement mortar 1:6 on old/new brick or concrete surfaces of walls, finished fair & even complete all as specified and directed by Engr-in-charge. | 100 | Sqm | - | - |
| 5 | M&L for chipping off/ taking down the spalled and old concrete from RCC members i.e RCC columns on internal surface for application of micrococrete upto three storey complete all as specified and directed by Engr-in-Charge . The follwing steps are to be followed -
i) Cleaning of rusted bars to be done with wire brushes or sand blasting till complete removal of rust ,after this coating of existing reinforcement bars shall be done by applying protective anti-corrosive zinc primer of fosroc or equivalent make with coverage as per technical specifications of manufacturer.
ii) Application of epoxy bonding agent on the surface before application of micro-concrete.
iii) Mechanical application of micro-cocrete material comprising of 10mm down graded aggregate chips to be mixed in a mechanical slow speed mixer . The mixed material shall be placed immediately in to the position, properly with out any time gap complete for an average thickness 25 mm including finishing the surface even and smooth, complete all as specified and directed by Engrs -In-Charge.
Note-
i) Work shall be executed by certifed applicator of approved make.
ii) Primer , bonding agent and micro- concrete matrial shall be of same make .
ii) Cost of scaffolding shall be included the qouted rate no extra amount will be paid for this .
Make :- Fosroc , Sika , Dr. Fixit . | 20 | Sqm | - | - |
| 6 | M&L for chipping off/ taking down the spalled and old concrete from RCC members i.e RCC beams ,slabs on internal surface for application of micrococrete upto three storey complete all as specified and directed by Engr-in-Charge . The follwing steps are to be followed -
i) Cleaning of rusted bars to be done with wire brushes or sand blasting till complete removal of rust ,after this coating of existing reinforcement bars shall be done by applying protective anti-corrosive zinc primer of fosroc or equivalent make with coverage as per technical specifications of manufacturer.
ii) Application of epoxy bonding agent on the surface before application of micro-concrete.
iii) Mechanical application of micro-cocrete material comprising of 10mm down graded aggregate chips to be mixed in a mechanical slow speed mixer . The mixed material shall be placed immediately in to the position, properly with out any time gap complete for an average thickness 25 mm including finishing the surface even and smooth, complete all as specified and directed by Engrs -In-Charge.
Note-
i) Work shall be executed by certifed applicator of approved make.
ii) Primer , bonding agent and micro- concrete matrial shall be of same make .
ii) Cost of scaffolding shall be included the qouted rate no extra amount will be paid for this .
Make :- Fosroc , Sika , Dr. Fixit . | 30 | Sqm | - | - |
| 7 | M&L for chipping off/ taking down the spalled and old concrete from RCC members i.e RCC Columns , facia , slab projection,chajjas etc on external surface for application of micrococrete upto three storey complete all as specified and directed by Engr-in-Charge . The follwing steps are to be followed -
i) Cleaning of rusted bars to be done with wire brushes or sand blasting till complete removal of rust ,after this coating of existing reinforcement bars shall be done by applying protective anti-corrosive zinc primer of fosroc or equivalent make with coverage as per technical specifications of manufacturer.
ii) Application of epoxy bonding agent on the surface before application of micro-concrete.
iii) Mechanical application of micro-cocrete material comprising of 10mm down graded aggregate chips to be mixed in a mechanical slow speed mixer . The mixed material shall be placed immediately in to the position, properly with out any time gap complete for an average thickness 25 mm including finishing the surface even and smooth, complete all as specified and directed by Engrs -In-Charge.
Note-
i) Work shall be executed by certifed applicator of approved make.
ii) Primer , bonding agent and micro- concrete matrial shall be of same make .
ii) Cost of scaffolding shall be included the qouted rate no extra amount will be paid for this .
Make :- Fosroc , Sika , Dr. Fixit . | 40 | Sqm | - | - |
| 8 | Matenal and labour for preparation of newly plastered surface of wall including facias, slab projections and like and applying two coat of first quality premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay Technology ,Excellent Dirt Pick up resistance of Asian Paints Ltd or equivalent of other approved make with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1.79 tr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over two coat of acrylic water based exterior grade primer @ 0.9ltrundiluted)/10 sq mtrs diluted with water in 1:1ratio as per manufacture's instruction and all coats incl primer to be applied with fully automatic airless spray machine of paint application with a flow speed of minimum 1 Iitr per minute having a pressure of 3300 PSI along with application of exterior wallcare putty of 1mm thickness upto three storey all as specified and directed by engineer in charge .
Note :- Allow 6-8 hrs to dry the surface in subsequent coats of primer and distemper and including necessary scaffolding complete all specified and directed by Engr-in-Charge. | - | Sqm | - | - |
| 9 | Material and labour for preparation of newly plastered wall surface etc to make the surface free from dust and make good smoothen surface by sand paper after application of wallcare putty of 1mm thickness and applying two coats of first quality Interior acrylic distemper of approved colour over a coat of primer of Asian Paints Ltd or equivalent of other approved make to be applied with fully automatic Electrically operated airless spray machine of paint application with a flow speed of minimum 1 It per minute having a pressure of 3000 PSI, upto three storey all as specified and directed by engineer in charge.
Note :- Allow 6-8 hrs to dry the surface in subsequent coats of primer and distemper and including necessary scaffolding complete all as specified and directed by Engr-in-Charge. | - | Sqm | - | - |
| 10 | Material and labour for preparation of newly plastered of ceilings and like to make the surface free from dust and make good smoothen surface by sand paper after application of wallcare putty of 1mm thickness and applying two coats of first quality Interior acrylic distemper of approved colour over a coat of primer of Asian Paints Ltd or equivalent of other approved make to be applied with fully automatic Electrically operated airless spray machine of paint application with a flow speed of minimum 1 It per minute having a pressure of 3000 PSI, upto three storey all as specified and directed by engineer in charge.
Note :- Allow 6-8 hrs to dry the surface in subsequent coats of primer and distemper and including necessary scaffolding complete all as specified and directed by Engr-in-Charge. | - | Sqm | - | - |
stage.html
html • 0.03 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.58 MB
genpages.pdf
Tender Documents • 1.28 MB
BOQ_874461.xls
BOQ • 0.74 MB
appendixb.pdf
Additional Documents • 0.70 MB
corrigendum02.pdf
PDF • 0.69 MB
corrigendum01.pdf
PDF • 0.39 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .