COMPREHENSIVE MAINT AND PERIODICAL SERVICES AT TANGDHAR UNDER THE AOR OF GE 874 EWS.

Amount

Dismantling of timber scantlings 40 sq cm and over in sec in any position in unframed work complete all as specified and directed.

M &L for second class soft wood as in scantling clean sawn fixed in position complete all as specified and directed.

Dismantling of boarding, any description, fixed in any position with nails etc complete all as specified and directed.

M & L for 2nd class soft wood weather boarding clean sawn, plain 20mm thick or feather edge 15mm to 20mm thick and fixed with 30mm laps complete all as specified and directed.

S&F Eaves Boarding of 20mm thick of Softwood 2nd class with nails in any situation (except flooring and skirting) , Planed one side with butt joints complete all as specified and directed.

S&F 4mm veneered decorative Plywood, grade1 BWR with resin with a decorative face veneers on one faces , fixed in ceiling, with screw to timber frame complete all as specified and directed.

S&F 4mm veneered decorative Plywood, grade1 BWR with resin with a decorative face veneers on one faces , fixed in wall, with screw to timber frame complete all as specified and directed.

S& F plywood, grade BWR type BB fixed with nails to timber frame of 6mm thick as in ceiling complete all as specified and directed.

S& F plywood, grade BWR type BB fixed with nails to timber frame of 6mm thick as in walling etc complete all as specified and directed.

S& F plain fillet, square, rectangular or triangular in section, clean sawn exc 3 Sqcm sand not exc 6 Sqcm secured with nails complete all as specified and directed.

S&F 2nd class soft wood wall panelling of good quality wood plain one side and edges tonged and grooved or rebated other side and dovetailed joints, chamfered both sides fixed to frame work with secret nailed as in wall panelling 15mm including cornice and beading as required and applying two coats of varnish over a filler coat of thin varnish after preparation of the surface complete all as specified and directed. Note:- Frame work shall be measured and paid separately.

Taking down cement plaster on brick or stone wall etc. including racking out joints hacking for key and scrubbing down with water etc. complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick wall or concrete surfaces in cement mortar 1:4 and finishing even & smooth without using extra cement complete all as specified and directed.

M&L for preparation new or undecorated surface of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and as directed.

Hacking out old broken glass (any thickness size quality or description) from wooden frame glazed with putty or wooden beads etc complete all as specified and directed.

M & L sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 in each pane, 3mm thick complete all as specified and directed.

M & L for applying two coats of synthetic enamel point over a coat of pink primer including preparation of new /old wooden surface exc 10 cm width or girths complete all as specified and directed.

M & L for lagging to pipes 15mm bore used in internal water supply or plumbing all round with 25mm thick bonded mineral wool preformed 'SNAP ON' pipe sections of density 144Kg/Cum conforming to IS-9842 provided with chicken mesh wire netting 25 gauge, 20mm mesh and covered with 0.01mm aluminium foil, complete all as specified and directed.

M & L for lagging to pipes 20mm bore used in internal water supply or plumbing all round with 25mm thick bonded mineral wool preformed 'SNAP ON' pipe sections of density 144Kg/Cum conforming to IS-9842 provided with chicken mesh wire netting 25 gauge, 20mm mesh and covered with 0.01mm aluminium foil, complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connections complete all as specified and directed.

Taking up or down 20mm bore steel tubing and connections complete all as specified and directed.

S&F 15mm GI steel tubing medium grade with all fittings and fixed complete to walls and ceiling and laid in floors complete all as specified and directed.

S&F 20mm GI steel tubing medium grade with all fittings and fixed complete to walls and ceiling and laid in floors etc complete all as specified and directed.

S&F 16mm 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and directed.

S&F 20mm 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed.

500 ltr capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) and fixed in position including dismantling of old tank, all as specified in SSR Part-I, complete all as specified and directed.

S&F 1000 Ltr capacity PVC water storage tank (cylindrical vertical with closed top ) and fixed in position all as specified in SSR Part -I, including dismantling of old tank complete all as specified and directed..

S & F 15mm bore bib taps Standard of PTMT any colour high pressure, screwed both ends for iron pipe or for brass ferrule (min weight 15mm-90gms), fixed in repair, complete all as specified and directed.

S & F 15mm bore Pillar tap of PTMT any colour high pressure screwed for iron pipes or for union (min weight 15mm-110gms), fixed in repairs, complete all as specified and directed.

S & F 15mm bore Stop valve of PTMT any colour high pressure, screwed both ends for iron pipe or for brass ferrule (min weight 15mm-90gms), screwed both ends for iron pipes or for union, fixed in repairs, complete all as specified and directed.

S&F in repair 15mm bore Bib taps, Chromium plated, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair 15mm bore Stop/angle valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-45gms) for 32mm bore dia of discharge pipe to WHB, sink fixed, complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts on both ends of length 600mm fixed in repair, complete all as specified and directed.

S& F in repair PVC connection 15mm size with PTMT nuts on both ends of length 450mm fixed in repair complete all as specified and directed.

S& F in repair PVC (SWR) pipes 75mm dia any length single socketed with rubber ring joint, laid in floor/walls as soil pipe, complete all as specified and directed.

S& F in repair PVC (SWR) pipes 110mm dia any length single socketed with rubber ring joint, laid in floor/walls as soil pipe, complete all as specified and directed.

S&F 75mm PVC(SWR) bends any radius complete all as specified and directed.

S&F 110mm bore PVC (SWR) bend or tee or radius complete all as specified and directed.

S& F in repair ball valves, high pressure, with polythene float and fly nut complete ,15 mm bore complete all as specified and directed.

S&F ball valves, high pressure, with polythene float and fly nut complete ,20mm bore all complete all as specified and directed.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S&F in repair cast iron body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S&F in repair gun metal globe gate valve 20 mm bore complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified

M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick joint free (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles laid over Screed bed 15mm thick in cement mortar 1:4 complete all as specified and directed.

M & L preparation of old decorated surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, mass and efflorescent salts and trading oil and greasy spots and apply one coat of white wash complete all as specified and directed.

Preparation of old surfaces of wall all as per item No 48 here in before and apply one coat of cement base paint on wall including curing complete all as specified and directed.

M & L for preparation of old surfaces of wall and applying two coat of cement base paint over one coat of chalk whiting primer on wall including complete removal of existing treatment complete all as specified and directed.

All as per item No 50 above but one coat of oil bound distemper on wall surfaces complete all as specified and directed.

M & L for preparation of old plastered surfaces and applying two coats of Oil bound distemper over a coat of primer applied over 3mm thick super fine wall care putty finish including preparing the surfaces even and smooth complete all as specified and directed.

All as per item No 52 above but except timber.

Dismantling wall and ceiling boards or insulation boards/slabs/blankets, any thickness including cover fillet complete all as specified and directed.

M&L for Veneered decorative plywood, 6mm thick grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with nails to timber frame work as in ceiling complete all as specified and directed.

M&L Veneered decorative plywood, 6mm thick, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with nails to timber frame work as in walls complete all as specified and directed.

M&L for Preparation of old painted surfaces and applying one coat of synthetic enamel paint on wooden surfaces of any description not other wise described over 10 cm width or grith etc complete all as specified and directed.

M&L for Preparation of old painted surfaces and applying two coat of synthetic enamel paint on wooden surfaces of any description not other wise described over 10 cm width or grith etc complete all as specified and directed.

M&L for Preparation of old painted surfaces and applying two coat of synthetic enamel paint on steel surfaces of any description not other wise described over 10 cm width or grith etc complete all as specified and directed.

M&L for Preparation of old painted surfaces and applying one coat of synthetic enamel paint on steel surfaces of any description not other wise described over 10 cm width or grith etc complete all as specified and directed.

S&F sheet glass 4 mm thick, ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete all as specified and as directed.

Demolition of brick/stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facing, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:4 Complete all as specified and as directed.

M&L for rendering 15mm thick on stone/brick masonry surfaces or other than fair faces in cement mortar 1:4 finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for rendering 15mm thick on stone/brick masonry surfaces or other than fair faces in cement mortar 1:6 finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for Preparation of old/undecorated surface of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and as directed.

S& F in repair Stop valves cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15mm bore complete all as specified and directed.

S& F in repair Bib taps cast copper alloy, chromium plated, with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule of 15mm bore, complete all as specified and directed.

S&F in repairs Brass CP mixer bore dia of 15 mm for mixing hot & cold water screwed down for iron pipe and fixed , complete all as specified and directed.

MIR HUSSAIN AND SONS (BID ID -3276654)

M/S MUNEER AHMAD WANI CONSTRUCTIONS (BID ID -3273744)

M/S AK CONSTRUCTION (BID ID -3272701)

M/S S. D. BUILDERS (BID ID -3274109)

Bidder Name

M/S S. D. BUILDERS

MIR HUSSAIN AND SONS

M/S GHULAM AHMAD BABA

M/S AK CONSTRUCTION

M/S MUNEER AHMAD WANI CONSTRUCTIONS