nagar palika parishad bah me agra marg par rajkumar generator ke pas 16 meter highmast light adhishthapankarya

Supply and fixing of 16 M high must shaft of approved make with rising system hot dip galvanized inside and outside dip having pole seed thickness 4 mm top Dia minimum 150 mm Bottom Dia minimum 360 mm base plate 32 mm thick suitable for wind velocity as per is 875 part 3 and having no circumferential weld with accessories for high must such as had frame suitable for 6 luminaries and its control gearbox 1.5 HP power tool motor 3 point suspension system with steel wire rope 6 mm dia double drum bench including making suitable Foundation as per manufacturer drawing/ site requirement along with Foundation bolts nuts washer anchor plate etc complete in all respect

Supply and fixing of factory wired integral LED Flood light luminaires with die cast aluminium body with toughend glass/UV stabilized PC cover and lenses built with mandatory driver set suitable for 170 to 200 Watt Confirming to IP 66 and IK07 and above Protection complete in all respect including labour.

Supply and burring of Safe Earthing Electrode T-39 (Hot-Dip Galvanized), Length up to 3000mm, outer pipe 76mm inner Dia 38mm terminal Dia 12 mm ,outer GI pipe of 16 SWG and inner GI pipe of 12 SWG with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonary housing. (From electrode terminal to switch board, cost of 25 X 3 GI. Strip will be extra) CPRI approved

Supply and fixing of single unit LED aviation obstruction light complete with transformer and LED spiral etc.

Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of 40 TPN, complete in all respect

Supply and laying of 10sq. mm 4 Core aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.

S&F of mica Junction plate with MCB and connection pin. M.R.

L/C of numbering of poles letter writing with paint with Radium Strip/ Tapping size 2"x3" as directed engineer of incharge

Supply and Wiring of sub mains with 6sqmm*4Core copper cable under Pole SOR. FRLSH PVC insulated multi strand copper conductor cable. 1100 V grade single core multistrand copper conductor cable in existing conduit complete with supply of all material labour and T&P required for proper completion of the work as directed at site by Engineer in charge.

Supplying and making end termination with brass compression gland and aluminium lugs for4 X 6 sq. mm (25mm) of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required