SPECIAL REPAIR TO ROOF TREATMENT IN CIRCLE QUARTERS PROVISION OF KITCHEN PLATFORM CUPBOARDS AND ALLIED WORKS AT B SERIES BUILDING AND PROVISION OF PLINTH WITH COVERED SHED FOR STORAGE AT DSSC WELLINGTON

Amount

Demolition of brick tiles or terracing tiles, single layer on roofs complete all as specified and as directed. Note : The work will be measured flat overall and not girthed.

M&L for laying 3mm thick APP modified water proofing membrane weighing not less than 3.6 Kg/Sqm, reinforced with non woven polyster matt black finished weighing not less than 100 gm/Sqm having softening point not less than 140 degree celsius longitudinal tensile strength not less than 300 N/Sqm, side lap 10cm & end lap 15cm over a coat of bitumen primer @ 0.40 Ltr/Sqm and finished with aluminum paint @ 0.10 Ltr/Sqm all as per manufacturers instruction and as directed by Engr-in charge. Note : The work shall be carried out by authorised applicators of manufacture's.

Material and labour for providing cement concrete type B-0, 1;2;4 (12.5mm graded stone agregate) averaging 30mm thick in floors,roofs etc (for roof padding) finished even and fair all as specified and as directed

Material and Labour for Rendering 10mm thick cement screed in cement mortar 1:3 mixed with liquid water proofing compound FOSROC's complast 421 IC @ 130ml per bag of cement including a bonding coat of FOSROC's Nito bond AR cement slurry (or) Equivalent as per manufacturers instructions on roof slab/ floor complete all as specified. Note : (liquid water proofing compound will be measured seperately)

Supply only liquid water proofing compound

Taking down cement or cement lime plaster of any description on brick or stone walls concrete surfaces etc including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and as directed.

M&L for 15 mm thick rendering in cement mortar 1:4 on brick work surfaces of wall, finished even and smooth with out using extra cement and mixed with Water Proofing compound including scaffolding complete all as specified and as directed. Note: water proofing compound wiil be measured and paid seperatly.

M & L for PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in padding, coping, bed plates, hold fast blocks, levelling courses, etc., including formwork, weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.

M&L Preparing newly plastered surfaces on external walls and applying one coat of exterior wall putty for smoothness, one coat of exterior wall primer two coats of weather coating exterior emulsion (Apex Ultima of Asian Paints/ weather coat smooth in Berger/Nerolac Excel Top Guard of Nerolac complete all as per manufacturer instruction as directed.

Complete removal of existing treatment on external walls by wire brushing, crack filling & Bio-wash to fight microbial growth and applying one coat of exterior wall putty for smoothness, one coat of exterior wall primer and two coats of weather coating exterior emulsion (Apex Ultima of Asian Paints/ weather coat smooth in Berger/Nerolac Excel Top Guard of Nerolac complete all as per manufacturer instruction as directed.

Demolition of un-reinforced concrete on Roofs padding floors (other than ground floors), beams/ chajjas and similar suspended work complete all as specified and as directed.

Demolition of reinforced concrete on Roofs, floors (other than ground floors), beams/ chajjas and similar suspended work complete all as specified and as directed.

Demolition of Brickwork or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified

M &L for 30 mm thick Plain Cement Concrete Type B0 1:2:4 (using 12.5 mm graded stone aggregate) as in roof padding / leveling coarse kerbs, or chamfered on edges finished even and smooth with using extra cement and mixed with water proofing compound. Note : Water proofing compound will be measured and paid seprataly .

M & L for 10 mm thick Screed bed or bedding layer of cement mortar 1:3 when the padding concrete is green for floor finishes and mixed with water proofing compound complete all as specified and directed. Note : Water proofing compound will be measured and paid seprataly.

M & L for Preparation of the surface including filling of pot holes ,clean from loose particle and grind the surface and further applying one coat of Asian smartcare epoxy primer as 100 gms per Sqm and further applying High build elastomeric warerproofing coating based on pure, hydrophobic polyurethane, cold applied of spray/brush applied, membrane with an elongation of 550% and tensile strength of 2.5N/mm2 as per ASTM D 2370, crack bridging ability of 3mm as per ASTM C1305, no leakage upto 7 bars of water pressure as per DIN 1048, shore A Hardness of min 45 as per ASTM D 2240. The system includes final base preparation, water based primer and applying Smart Care PU Magnum or approved equivalent in two to three coats to achieve a min, thickness of 1.2mm etc. complete as per manufacturere specifications and as directed. Note :- 1. Application should be done by Authorised applicator and it should get approval prior to execution of GE. 2. Ponding test to be conducted which deemed to be included in the quoted rate by the contractor.

M & L for preparation of old decorated surfaces of ceiling, cornices etc including brooming down or steel wire brushing, scraping down smoke , moulds, moss and efflorescent salt and trading oil and greasy spots etc and applying two coat of white wash complete all as specified and as directed.

M & L for applying one coat of oil bound distemper on old decorated surfaces of walls including preparation of surfaces by washing, rubbing down and stopping of distempered surfaces all as specified and as directed.

M & L for complete removal of existing wall finishes and applying Two coats of oil bound distemper over one coat of primer over 3 mm thick wall care putty on old decorated surfaces of walls including preparation of surfaces by washing, rubbing down and stopping of distempered surfaces all as specified and as directed.

M & L for preparation of old surfaces and applying one coat of weather coating exterior emulsion (Apex Ultima of Asian paints/ Weather coat smooth in Berger/Nerolac Excel Top Guard of Nerolac on wall complete all as specified and as directed by Engr-in-Charge. Make : Asian Paint (Apex Ultima)/ Berger Paint (Weather coat all guard)/ Dulex (Weather shield)

M & L for Complete removal of existing surface finishes preparation of old surfaces and applying two coat of acrylic emulsion exterior grade over a coat of primer over 3 mm thick wall care putty on wall complete all as specified and as directed by Engr-in-Charge. Make : Asian Paint (Apex Ultima)/ Berger Paint (Weather coat all guard)/ Dulex (Weather shield)

Providing and fixing Powder coated aluminium (minium thickness of powder coating 50 micron) work for frames and shutters of doors, windows, ventilators and partitions (Fixed portions) with for doors, windows, ventilators and partitions (fixed partitions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS : 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc, Aluminium sections shall be smooth, rust free, straight, mitred and joined mechanically wherever required including cleat angle, Aluminium snap neading for glazing/ paneling, C.P. brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. Make : Jindal/ Hindal/ Ajith India

M & L for 4.8 mm thick frosted Sheet glass, ordinary quality to be fixed in aluminium section in square or rectangular exc 0.5 sq. m in each pane including glaging clips, rubber packing for fixing glass panes in frames all as directed

M&L for 4 mm thick aluminium Composite panel work as in wall panelling or partitions complete all as specified and directed.

S&F 100 mm long medium weight Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised

S&F 100 mm long Aluminium barrel tower bolts, extruded sectiont ISI marked and fixed complete in repairs

S&F 150 mm long Extruded Aluminium alloy handles, Fabricated type anodised ISI marked complete in repairs

S&F aluminium Mortice lock, vertical type, size 100 mm with 4 livers

S&F Aluminium Door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed

S&F 140 mm Floor door stopper of aluminium alloy body and tongue, nodised, with hard drawn steel spring, fixed in floor

Taking up or down 15 mm bore steel tubing and connections, including cleaning for Refixing or removal for considering under schedule of credit.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for Refixing or removal for considering under schedule of credit.

S & F 15 mm bore Galvanized Steel tubes, medium grade with all fittings for water supply pipes etc., laid in trenches/fixed on walls.

Fixing only 15 mm bore Galvanized Steel tubes, medium grade with all fittings for water supply pipes etc., laid in trenches/fixed on walls.

S & F 20 mm bore Galvanized Steel tubes, medium grade with all fittings for water supply pipes etc., laid in trenches/fixed on walls.

Fixing only 20 mm bore Galvanized Steel tubes, medium grade with all fittings for water supply pipes etc., laid in trenches/fixed on walls.

Supply & Fix in repair rotational moulded polythene water storage tanks, 1000 Ltr capacity, cylindrical, vertical with closed top, hoisted and fixed in position including 20 mm dia PTMT ball valve, high presured with polyethane float and fly hut complete, screwed for iron pipeall directed and specified. Make : Sintex/ Vectus/ Polycon.

S & F in repairs 20 mm bore Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F sinks made of stainless steel, 1mm thick kitchen or laboratory with plugs, washers and waste pipe; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S & F CP two way bib taps 15 mm bore Make : Parryware cat No G1405A1/ Hindware cat No F730011/ Jaquar cat No C0N 107KN all as specified and as directed.

S & F 18mm thick High Density High Moisture Resistant (HDHMR) Board, both side laminated of approved colour as in shutters, back board, vertical support and horizontal shelves of kitchen/bedroom cupboards fixed with screw to timber framed work etc. Note: Rate includes for all exposed edges/surfaces to be finished with same laminated sheet edge tap to match with the other surfaces

S & F stainless steel soft close hinge with 35mm cup dia, full overlay, 110 degree opening suitable for 18mm thick shutters complete all as specified and as directed. MAKE: EBCO/ GODREJ / KAFF / HETTICH

S & F Stainless Steel handle of size 150mm for kitchen/bedroom cupboards fixed with screws complete all as specified and as directed. MAKE: EBCO/ GODREJ / KAFF / HETTICH

S & F Magnetic closer of suitable size for kitchen/bedroom cupboards fixed with screws complete all as specified and as directed. MAKE: EBCO/ GODREJ / KAFF / HETTICH

S & F stainless steel telescopic ball bearing channel, zinc plated finish for drawer including necessary fittings up to length of 500 mm fixed with screws complete all as specified and asdirected. MAKE: EBCO/ GODREJ / KAFF / HETTICH

S & F stainless steel kitchen baskets (SS-304) of size 544mm x 505mm x 200mm complete all as specified and as directed. MAKE : EBCO, Cat No : RA-BCCS1-21-20-8 or equivalent in HETTICH/ KAFF/ GODREJ

S & F stainless steel kitchen baskets (SS-304) of size 544mm x 505mm x 100mm complete all as specified and as directed. MAKE : EBCO, Cat No : RA-BCCS1-21-20-4-CT or equivalent in HETTICH/ KAFF/ GODREJ

S & F stainless steel kitchen baskets (SS-304) of size 530mm x 505mm x 200mm complete all as specified and as directed. MAKE : EBCO, Cat No : RA-21-20-8 or equivalent in HETTICH/ KAFF/ GODREJ

S & F stainless steel kitchen baskets (SS-304) of size 530mm x 505mm x 150mm complete all as specified and as directed. MAKE : EBCO, Cat pat No : RA-21-20-6-PL or equivalent in HETTICH/ KAFF/ GODREJ

M& L Rendering in CM (1:6) 15 mm thick on fair faces of brick/ concrete surfaces finished even and smooth without using extra cement complete all as specified ans as directed

M&L for RCC nominal mix 1:2:4 type B1 (using 20mm graded stone aggregate) as in Slab supported in walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc complete all as specified.

M&L for TMT bars 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hopping for columns,hooking ends and binding with and including MS wire (annealed) not less than 0.90 mm dia confirming to TMT bars complete all as specified.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings, cooking platform and similar work; not exceeding 200mm thick (Horizontal or sloping) for fair finished surfaces using steel form work.

Formwork to edges of concrete flats like cooking platform breaks in floors, penings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide.

M&L for Granite stone slab flooring 18-20 mm thick jet black shade as approved by GE machine cut,bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, rounding edges as required over 15mm thick rendering in CM 1:6 to be fixed flooring, door, windows cladding/ openings and kitchen plateform complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and as directed.

M & L Vitrified Ceramic tiles light shade 8-10mm (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in CM (1:6) complete all as specified and as directed.

Cutting out bricks,forming toothing for,and bonding new into old work built in CM (1:4) including value of new materials entering old walls and jointing and pointing all as directed.

Cutting openings, through brick walls built in cement mortar for door, window and other openings or enlarging existing openings.converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks,removing surplus serviceable bricks, hard-core, etc. to store and rubbish not exc. 50m all as specified and as directed.

Excavation in trenches n. exc. 1.5 metre wide and not exc. 1.5 metre in depth and getting out as in Hard/Dence soil for foundation etc complete all as directed by the Engr-in-Charge.

M&L for Cement concrete type D-2 (1:4:8) using 40mm graded stone aggregate as in foundations,filling and mass concrete complete all as specified and as directed

M&L for precast solid block masonry exceeding 10 cms in width 1:3:6 type C1 (using 20mm graded stone aggregate) and set in cement mortar 1:6 all as specified and as directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete as in hard /dense soil all as spd and directed.

Removing excavated material (soil) n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point all as directed by Engr In Charge.

M&L for Sand filling using M-Sand under floors or in foundations including watering and consolidation complete all as spd and as directed

M&L hardcore of gauge n.exc 63 mm deposited, spread & levelled in layers n. exc 15 cm thick, watered & rammed to a true surface with broken stone or boulders complete as specified and as directed.

M&L 75mm thick PCC 1:4:8 type D2 (40 mm graded stone aggregate) as in Sub base floor finished even and fair as in sub base of floor etc all as directed by the Engineer In Charge.

M&L Providing 40mm thick cement concrete type B0, 1:2:4 using 12.5 mm graded stone aggregate .as in floors for levelling course including finish the surfaces of concrete topping even and fair without using extra cement.

Supply and fix glass dividing strip of 38mm wide and 3mm thick and fixed on concrete surafec as directed by the Engr In charge.

Material and labour for Rendering in Cement Mortar 1:6, 15mm thick on stone masonry or other than fair faces of brick work wall surfaces, finished even and smooth without using extra cement complete all as specified and as directed..

M&L for MS Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

S&F prepainted Galvalume Aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strenth of 550MPA as in roof covering /cladding to wall,crimp curved where necessary fixed with self tapping screws complete all as spd and as directed

S&F prepainted Galvalume Aluminium zinc coating GI based plain steel sheet 0.5mm thick of any colour having tensile strenth of 550MPA as in roof covering /cladding to wall,fixed with self tapping screws complete all as spd and as directed

Supply and fix Pressed steel frames of size 105 mmx 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed

Supply and fix Steel door including projecting type hinges, steel handle, complete, with glazing bars, dovetailed or welded

M & L for applying two coats of synthetic enamel painting over a coat of red oxide primer on steel surface exc 10 cm width or grith including preparation of surfaces all as specified and as directed. Make : Apcolite in asian/Luxol of Berger/ Statin Enamal in Nerolac

M&L 75mm thick Plain Cement Concrete type C-1, 1:3:6 (20mm graded stone aggregate) as in floors, plinth protection etc. finished even & fair without using extra cement complete as specified and as directed.

RMR ENGINEERING CONTRACTORS PRIVATE LIMITED

UNIQUE INDIA CONSTRUCTIONS