Certain B/R repairs and allied works to Water Supply installation under GE (Utilities) Udhampur.

Amount

Demolition of brick work or stone /boulder masonry, built in cement mortar, including all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles etc, complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete (unreinforced) in ground floor and in pavings not exceeding 15 cm thickness (below or above ground level), complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided, complete all as specified and directed by Engr-in-Charge.

Brick work with sub class 'B' bricks straight or curved on plan, exceeding 6 m mean radius with old size bricks, built in cement mortar 1:6, complete all as specified and directed by Engr-in-Charge.

All as per serial item No 04.00 here-in-before but except bricks, complete all as specified and directed by Engr-in-Charge. Note : Old bricks obtained against demolition shall be used.

Walling of random rubble stone masonry uncoursed with best quality lacally available harder stones such as granite, trap, basalt stone etc, wellbonded bedded and solidly hearted, built in cement mortar 1:6, complete all as specified and directed by Engr-in-Charge.

All as per serial item No 06.00 here-in-before but except stones, complete all as specified and directed by Engr-in-Charge. Note : Old stones obtained against demolition shall be used.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed by Engr-in-Charge.

Rolled mild steel work as in roof trusses(framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing(Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to grade Fe-410 W(Gde-E-50) quality-A, steel work complete all as specified and directed by Engr-in-Charge.

Rolled mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment conforming to grade Fe.290.Gde-E-165, steel work complete all as specified and directed by Engr-in-Charge.

Welded steel wire fabric supplied and fixed to wood or steel members weight not exc. 4 kg per square metre complete all as specified and directed by Engr-in-Charge.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and directed by Engr-in-Charge.

M&L prepainted galvalume aluminium zink coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.

M&L prepainted galvalume aluminium zink coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.

Dismantling Asbestos cement (corrugated,semi corrugated, etc) sheets in roof coverings complete all as specified and directed by Engr-in-Charge.

M & L for 6mm thick asbestos cement corrugated or semi corrugated sheets in roofs, walls etc fixed with L-type or J-type of cranked hook bolts complete all as specified and directed by Engr-in-Charge.

Except sheet 6mm thick asbestos cement corrugated or semi corrugated sheets in roofs, walls etc fixed with L-type or J-type of cranked hook bolts complete all as specified and directed by Engr-in-Charge.

M & L for Asbestos cement one piece plain angular ridge 6mm thick fixed with L-type or J-type or cranked hook bolts complete all as specified and directed by Engr-in-Charge.

Taking down chowkats or frames including shutters (without taking off shutters from the frames) not exceeding 1.5sqm each and removing from site, complete all as specified and directed by Engr-in-Charge.

Taking down chowkats or frames including shutters (without taking off shutters from the frames) exceeding 1.5sqm but not exceeding 4 sqm each and removing from site, complete all as specified and directed by Engr-in-Charge.

Taking down shutters of any description exceeding 1.00 sqm and not exceeding 2.00 sqm each and removing from site, complete all as specified and directed by Engr-in-Charge.

S&F 2nd class hard wood (sal/hollock), glazed and skelton shutters 35mm thick open rebated and prepared to receive glass, gauge,etc. (without sash bars), edges of framing palin, chamfered or rounded, fitted with cut & mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Pt-I Section 8.24(a) supplied and fitted to chowkhats complete including fixing only iron mongery such as tower bolt,handle,hinges,aldrop bolt etc complete all as specified and directed by Engr-in-Charge.

S&F factory made, 2nd class hard wood (sal/hollock), plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides, the side of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, 35 mm thick complete including fixing only iron mongery such as tower bolt,handle,hinges,aldrop bolt etc complete all as specified and directed by Engr-in-Charge.

Factory made solid PVC moulded door shutter ( with particle board core) of 30mm thick with 2 raised panel design with 2mm thick moulded PVC sheet on back face & 2mm coloured prelaminated PVC sheet on front face as specified in SSR Part II 2010 Sec 8 clause 8 B 1 to 8B 2.1 complete all as specified and directed by Engr-in-Charge.

S&F steel window (box type) factory made with sidehung shutter including pintol hinges, steel handles, steel peg stay and all locking arrangement complete with glazing bars dovetailed or welded including one shop coat of red oxide primer complete all as specified and directed by Engr-in-Charge.. Note :( i) The window shall be fabricated as per Drg No CEUZ/TD/1269/2008 Sheet 1/3 to 3/3 . (ii) MS fillets, glazing wire gauge shall be measured and paid seprately.

All as per serial item No 25.00 here-in-before but without glazing bar complete all as specified and directed by Engr-in-Charge. Note : (i) The window shall be fabricated as per Drg No CEUZ/TD/1269/2008 sheet 1/3 to 3/3. (ii) MS fillets, glazing, wire gauge shall be measured and paid seprately.

Solid PVC door frame of size 50 mm x 47 mm made of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified in clause 8B.3.1 and shown on page 150 of MES Schedule Part-II (2004) complete all as specified and directed by Engr-in-Charge.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as per clause 8 B.2.1 of MES schedule Part-II (2004) complete all as specified and directed by Engr-in-Charge.

Mild steel framed work such as grills, gratings with ends of bars shouldered or reveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar works, conforming to Fe-290, Gde E-165, complete all as specified and directed by Engr-in-Charge.

S&F aluminum handles cast type, anodised, 150 mm size complete all as specified and directed by Engr-in-Charge.

S&F in repair mild steel cold rolled butt hinges medium weight 100 mm long, including fixing and welding to pressed steel/wooden door frame if required complete all as specified and directed by Engr-in-Charge.

S&F of 200 mm long mild steel barrel tower bolts, stove enameled black, with bright bolt complete all as specified and directed by Engr-in-Charge.

S&F of mild steel sliding door bolt plate type 250 mm long stove enameled black with bright bolt not less 12 mm dia bolt with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, complete all as specified and directed by Engr-in-Charge.

Dismantling of wall and ceiling boards (Fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed by Engr-in-Charge.

Powder coated Aluminium snap grid frame work 605 x 605 mm for false ceiling including all hanging arrangements with hangers 6mm dia GI ( upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long complete all as specified in clause 10.38.1 of MES Schedule Part-I complete all as specified and directed by Engr-in-Charge.

Asbestos cement plain decorative type building boards, 4mm thick of size 60cmx60cm fixed to snap grid frame work as in ceilings complete all as sspecified and directed by Engr-in-Charge.

Preparation of new wooden surfaces of any description not otherwise described, exc 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed by Engr-in-Charge.

Pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer and tarring back side of frame, complete all as specified and directed by Engr-in-Charge.

Pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer and taring back side of frame, complete all as specified and directed by Engr-in-Charge.

M&L for providing cement concrete 1:3:6 type C-0 using 12.5mm graded crushed stone aggregates for filling in the pressed steel door frame/hold fast complete all as specified and directed by Engr-in-Charge.

S&F of stainless steel wire clothcut to size, 0.36 mm nominal dia wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staple in repairs complete all as specified and directed by Engr-in-Charge.

Dismantling floor, hearth or wall tiling including CM bedding but not backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge.

M&L for Non skid coloured 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over 15mm thick screed bed in CM 1:6, complete all as specified and directed by Engr-in-Charge.complete all as specified and directed by Engr-in-Charge.

Ditto all as per item above but on skirting over vertical surfaces & including 10 mm thick cement mortar 1:4 screed, set and jointed with grey cement slurry and pointed in grout of matching shade of tiles complete all as specified and directed by Engr-in-Charge.

Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab over 15mm thick plaster in CM (1:4) jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing, granite cutting and mirror polish finish complete all as specified and as directed by Engr-in-Charge.

M & L for kota stone slab flooring 20-25mm thick in riser of steps, skirting, dado & pillar over 10mm thick plaster in CM (1:3) jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing, granite cutting and mirror polish finish complete all as specified and as directed by Engr-in-Charge.

Glazed ceramic coloured tiles 450mm x 350mm x 7mm thick as in vertical/Dado surfaces such as skirting dado etc set and jointed in neat cement slurry, jointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 to receive tiles, complete all as specified and directed by Engr-in-Charge.

M&L for 100 mm thick cement concrete 1:2:4, type B2 (using 40mm graded agg) as in path etc finished even and smooth w/o using extra cement complete all as specified and directed by Engr-in-Charge.

M & L for 50mm thick Plain Cement Concrete 1:3:6, type C-2 (using 20mm graded crushed stone aggregate), finished even and smooth without using extra cement as in plinth protrection complete all as specified and directed by Engr-in-Charge.

Roughening surfaces of old concrete surfaces by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and directed by Engr-in-Charge.

M&L for brushing neat cement slurry with 3.00kg of cement per sq.metre complete all as specified and directed by Engr-in-Charge.

Chequered cement concrete coloured tiles 25cmx25cmx25mm thick glossy finish set over & including 20 mm thick screed in cement mortar (1:6) with neat cement and pointed in grey cement mixed with pigment to match the shade of tiles complete all as specified and directed by Engr-in-Charge.

Machine pressed precast concrete interlocking paver block 50% grey and 50% coloured, any shape and size, conforming to IS 15658-2006 of 80mm thickness, M-40 over and including 75mm thick PCC, type D-2, M-7.5(1:4:8) and 25mm thick sand cushion complete all as specified and directed by Engr-in-Charge.

Taking down cement plaster including tiles of any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed by Engr-in-Charge.

Rendering 15mm thick in cement mortar 1:4 on fair faces of bricks work/concrete surface finished the surface even and smooth (without using extra cement) as on walls complete all as specified and directed by Engr-in-Charge. Note :- Plaster shall be carried out upto any height in patches and contractor shall have no claim for height and scaffolding what so ever is required to complete the work.

Rendering 15mm thick in cement mortar 1:6 on fair faces of bricks work/concrete surface finished the surface even and smooth(without using extra cement) as on walls complete all as specified and directed by Engr-in-Charge. Note :- Plaster shall be carried out upto any height in patches and contractor shall have no claim for height and scaffolding what so ever is required to complete the work.

M&L for applying two coat of oil bond distemper on walls after preparation of newly plastered surfaces over a coat of white primer, complete all as specified and directed by Engr-in-Charge.

M&L for applying two coats of cement base paint on walls after preparation of newly plastered surfaces over a coat of white primer, complete all as specified and directed by Engr-in-Charge.

M & L two coat of cement base paint over a coat of alkali resistant priming paint over old plastered surfaces of wall including preparing surfaces after conplete removal of existing treatment upto 5-10 m height from ground level and at all locations as directed including , scaffolding, cleaning and curing etc. complete all as specified and directed by Engr-in-Charge.

Preparation of old plastered/unplastered wall surfaces and applying one coat of oil bound distemper (including wahsing, rubbing down and stopping of distempered and painted surfaces), complete all as specified and directed by Engr-in-Charge.

Preparation of old plastered/unplastered wall surfaces and applying one coat of white wash, complete all as specified and directed by Engr-in-Charge.

Taking up or down steel tubing with connections for cleaning for refixing or removing to storeyard complete of bore 15mm complete all as specified and directed by Engr-in-Charge.

M&L for steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore 15 mm complete all as specified and directed by Engr-in-Charge.

Fixing only Steel water tubing 15mm dia medium grade galvanised with all fitting and fixed complete to wall and ceiling or laid in floors complete all as specified and directed by Engr-in-Charge.

S&F in repairs Rotational moulded polyethylene water storage tank 500 Ltrs capacity, ISI marked (cylindrical vertical with closed top), double wall layer construction, hoisted and fixed in position complete all as specified in SSR Part-I, making connections incl 20mm bore ball valve brass with polyethylene float and fly nut and tank nipples incl dismantling existing water tank of any capacity and removing from site, complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repair ball valves of size 15 mm bore dia high pressure of PTMT (Make-Prayag) with epoxy coated aluminium rod and high density plastic ball (Minimum weight not less than 210 gms) screwed for iron pipe and fixed including necessary fitting as reqd at site complete all as specified and directed by Engr-in-Charge

Supply and fixing in repair angle valves cast copper alloy 15 mm, screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions including necessary fitting as required at site complete all as specified and directed by Engr-in-Charge.

S&F in repair 15mm dia stop cock fancy type chromium plated complete all as specified and directed by Engr-in-Charge.

S&F as in repair bib tap 15mm bore fancy type chromium plated complete all as specified and directed by Engr-in-Charge.

S&F bib cock 15mm bore fancy type long body chromium plated in repair complete all as specified and directed by Engr-in-Charge.

Preparation of new steel surfaces of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed by Engr-in-Charge.

M&L precast cement concrete jallies 25mm thick (measured solid set in cement mortar 1:4 incl all moulding and necessry form work, complete all as specified and directed by Engr-in-Charge.

Precast reinforced cement concrete, (Nominal mix), Type B-1, 1:2:4 (using 20mm graded crushed stone aggregates) as in cover slab, manhole cover, shelves and similar articles with plain face, set and jointed in cement mortar 1:4, complete all as specified and directed by Engr-in-Charge. Note : Reinforcement shall be measured and paid separately.

TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for slabs,beam, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, complete all as specified and directed by Engr-in-Charge.

TMT bars 6mm to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for slabs,beam hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia,complete all as specified and directed by Engr-in-Charge.

Hacking out old broken glasses (any thickness, size, quality or description) from wooden frames or steel frames, glazed with putty or fixed with wooden beads, complete all as specified and directed by Engr-in-Charge.

4 mm thick sheet glass ordinary quality, and glazing with oil putty or wooden beads in squares n.exc 0.50 Sqm in each pane, complete all as specified and directed by Engr-in-Charge.

10 litre capacity PVC, low level, valveless, syphonic action type flushing cistern, inlet ball valve, float valve, handle and fixing arrangement, 32 mm dia PVC flushing pipe and 15 mm dia 450 mm long PVC connection with PTMT waste coupling (fixed in repair), complete all as specified and directed by Engr-in-Charge.

PVC connection suitable for 15 mm pipe with PTMT nuts and washers for both ends of length 450 mm long, (fixed in repair), complete all as specified and directed by Engr-in-Charge.

Supply only integral water proofing compound as per latest IS specification complete all as specified and directed by Engr-in-Charge.

S&F in repir stainless steel grating doom 100mm dia with or without hole complete all as specified and directed by Engr-in-Charge.

S&F in repair vitreous China wash basin, white, flat back, size 550x400mm excluding tap, chain, plug but including for fixing of taps,waste fitting, brackets and cutting for and pinning in ends of brackets but fixed in repair complete all as specified and directed by Engr-in-Charge.

S & F 110mm bore PVC (SWR) pipes signle socketed, in any length with rubber ring joints, laid in trenches or in floor inluding taking down existing old pipes complete all as specified and directed by Engr-in-Charge.

All as per serial item 83.00 here-in-before but bore of pipe 75mm complete all as specified and directed by Engr-in-Charge.

S & F 110mm bore PVC (SWR) pipes signle socketed, in any length with rubber ring joints, fixed in walls inluding taking down existing old pipes complete all as specified and directed by Engr-in-Charge.

S & F 75mm bore PVC (SWR) pipes signle socketed, in any length with rubber ring joints, fixed in walls inluding taking down existing old pipes complete all as specified and directed by Engr-in-Charge.

S&F for 110mm PVC (SWR) bends any radius complete all as specified and directed by Engr-in-Charge.

S&F for 75mm PVC (SWR) bends any radius complete all as specified and directed by Engr-in-Charge.

S&F for 75mm dia outlet PVC(SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed by Engr-in-Charge.

S & F in repair 15mm dia pillar taps, cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without lettered 'Hot' and 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed by Engr-in-Charge.

S & F in repair 32 mm dia waste coupling of PTMT (half or full threaded) (minimum weigh 45 gms) complete all as specified and directed by Engr-in-Charge.

S & F in repair for Vitreous china wash down water closet pan pedestal pattern, white including connection to drain (or outgoing pipe) and to flushing pipe antisyphonage pipe and plastic water closet seat cover white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device including jet pressure complete all as specified and directed by Engr-in-Charge.

S&F PVC Flex Printed Sign Board made on 4 mm thick aluminum sheet exc 1.0 sqm and n.exc 6.0 sqm ,with printed name of installation ,office and symbol ,logo etc with supported circular GI steel section frame of size 25 mmx25mmx1.29 mm thick along with proper clamping with nut bolts or welding complete in repairs all as specified and directed by Engr-in-Charge.

Manufacturing supplying and fixing directional reflective type with vinyl bacground sign boards made out (stainless steel grade 302) S.S square section 40x40x3.0 mm. Frame size 0.90x0.60m and height from ground level 1.5 m and 0.60 m in ground including embeded with pcc 1:2:4 pot hole sixe 0.30x0.30x0.60 m including excavation earth work &removing excavated soil to a distance n exc 50 m and 3 mm thick aluminium sheet ,face to be fully covered with reflctive sheeting confirming to type-IV of ASTM-D 4956-01 in blue and silver white or other colour combination with suitable sized aluminium alloy rivets @20 cm c/c to back support frame of (stainless steel grade 302) s.s square section 40x40x3.0 mm along with anti theft resistant measures in repairs complete all as specified and directed by Engr-in-Charge.

Repairs to existing steel rolling shutters without ball bearing by taking down top cover, anchoring rod, spring etc and providing new springs and anchoring rod, replacing the worn out strips, safety lever lock of shutters and welding of handle, hasp staple and other broken articles etc, greasing the spring, guide rail, shaft etc and making functional and errecting in position, including refixing of top cover/hood etc, and refixing in same opening and making good in CM 1:3/PCC to match the existing surface, opening n.exc. 10 sqm each and finally painting with two coats of synthetic enamel paint, complete all as specified and directed by Engr-in-Charge.

S&F Steel rolling shutter (curtain made of 1mm thick mild steel sheet) area exc. 5sqm each with ball bearing, as specified including top cover, anchoring rod, hasp and staple, guide chennels, strike plate etc and one shop coat of primer erected in position as indicated push pull or manual type ,thickness of laths 1mm ,incl taking down carefully existing old rolling shutter complete all as specified and directed by Engr-in-Charge.

Removal of existing old water proofing treatment as in roofs and Preparing RCC roof slab top by wire brushing and cleaning the dust and foreign materail etc , there after applying 15mm thick cement plaster on concrete surface in CM 1:4 finished even and smooth without using extra cement using water proofing compound complete all as specified and directed by Engr-in-Charge.

Preparing and Cleaning the dust and foreign materail etc complete for roof surfaces (plaster/concrete) and applying a coat of hot blown bitumen 85/25 grade @ 1.20kg/Sqm and there after laying of a layer of APP based polymeric membrane (five layered with centre core as 100 microns high molecular high density polyethylene film) weighing not less than 3.5 kg/Sqm and reinforced with polyster non woven fabric (wt. not less than 150 gms/sqm) laid on bituminous surface by press application method with 75mm side overlap and 100mm end overlap. The membrane has to be laid with LPG torch application and overlaps sealed and finished neat, after that applying one coat of bitumen 85/25 grade on top surface @ 1.20 kg/Sqm and blinded with premier dry sand @ 0.5 kg/Sqm dusted over bitumen coat, incl.applying two coats of aluminium paint over roof treatement complete all as specified and directed by Engr-in-Charge.

Supply only integral water proofing compound as per latest IS specification complete all as specified and directed by Engr-in-Charge.

RAMAN CONSTRUCTION CO

vmd traders

RAJ MOHD

NARESH KUMAR KHAJURIA

BHAGWATI TRADERS

M/S ASHOK KUMAR PACHIALA

MADAN LAL SHARMA AND SONS

TARUN BUILDERS