RequiredExperience with Government
RequiredAnnual Turnover
RequiredCertificate (Requested in ATC)
RequiredOEM Authorization Certificate
RequiredOEM Annual Turnover Bid to RA enabled No Tractor Trailer Mounted Suction Machine ( 1 pieces ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) Certification Trailer confirming to IS 8213:2000 (latest) and AIS 112 (latest) Yes * Conforming to IS:13496 for Suction Machine for cleaning Sewers
RequiredYes * 1/7 Manholes and ancillary structures provided on sewer line and closed storm water drains Necessary clearance from RTO to be obtain before supply of Trailer mounted Suction cum Jetting Machine Yes * Form 22 A - For compliance with pollution standards
Requiredsafety standards of components and road worthiness as per CMVR Rules Yes * Availability of test reports for all critical components from the manufacturer or OEM of Jetting Pumps
Requiredvacuum pumps
Requiredpower takeoff unit
RequiredJetting Hose etc shall be from any ILAC/NABL accredited/Central Govt Lab To be furnished to buyers on demand Yes * Avaliability of Test report fron approved Laboratory to prove conforming to specification as per AIS 112 for trailers to be furnished to buyer on demand Yes * Generic Parameters Type of Trailer mounted machines Suction * GVW of Trailer 4000 More than 4000.0 Or higher Wheel base 0 More than 0.0 Or higher Payload capacity of trailer 3500 More than 3500.0 Or higher Make and Model of Vacuum Pump - * Make and Model of PTO - * Make and Model of Hydraulic Motor - * Make and Model of - * 2/7 Hydraulic Pump Make and Model of Suction Hose - * Mount Type Tractor Trailer mounted * Constructional Parameters Capacity of split shaft PTO (Kgm) 200 200 Overall Length 4000 More than 4000.0 Or higher Overall Width 1400 More than 1400.0 Or higher Equipment Length 4000 * Equipment Height 2000 * Equipment Rear Over Hang No * If Yes
RequiredDeclare Equipment Rear Over Hang 0 * Derrick Arm Available No No Vacuum Pump - Rotary Vane/Sliding Vane Yes * Vacuum Pump Flow (Cu-m/hr) 156 More than 156.0 Or higher Vacuum Pump Power 3.3 * Rated RPM at Max Pump power 1300 * Vacuum Relief Valve Size 2.5 * Vacuum Suction Depth (as per IS:13496 latest) 8 More than 8.0 Or higher Suction Hose - Lightweight
Requiredheavy duty
Requiredreinforced
RequiredPVC along with quick connect coupling arrangement Yes * Suction Hose Internal Diameter (as per IS:13946 latest) 100 100.0 Suction Hose Length 3 More than 3.0 Or higher Number of Suction Hose (Nos) 5 More than 5.0 Or higher Safety Equipments - * 3/7 Silencer/Filter(Micro Strainer) Yes * Exhaust Silencer and injection cooling air Inlet Silencer/Filter Yes * Blower Outlet and Air- Exhaust Silencer Yes * Check valve Yes * Vacuum Limitation Valve Yes * Drain Off valve Yes * Total Tank Capacity (sludge tank+water tank) 3000 3000.0 - 8000.0 Or higher Water storage Tank Capacity 500 More than 500.0 Or higher Sludge Storage Tank capacity 2500 * Thickness of tank plate (It shall be designed at a safety factor of 4 times the operating pressure)as per IS 13496 5 More than 5.0 Or higher Material of tank Mild Steel (Grade-A) Confirming to IS 2062 latest * Surface preparation and finish of tank's Exterior - sanded prior to spray painting and spray painted with two coats of superior quality anti corrosive primer and two coats of enamel metal paint Yes * Surface preparation and finish of Tank's Interior - clean water two coats anti corrosive primer & two coats of grey enamel paint & Sludge shall be with two coats of epoxy paint to resist corrosion Yes * Provision for locking and unlocking arrangement of rear gate of tank
Requiredto be Yes * 4/7 operated hydraulically for quick tipping and cleaning Hose Reel Drive operated by hydraulic motor Yes * Dished Head Yes * Tank Rear Door Opening by hydraulic system Yes * Reinforcement rings in pipes Yes * Hydraulic Pump Type Gear Type * Water Level Indicator Type (with safety coverage) - * Water Level Indicator Nos 2 * Thickness of Cover for Engine
RequiredPump and Hose Reel compartment 3 More than 3.0 Or higher Material of Cover for Engine
RequiredPump and Hose Reel compartment MS Sheet MS Sheet Full bore Quick Acting Valves in the sewage path Yes * Air Pumps to safeguard the pump from overloading Yes * Make and Model of Air Pump - * Sludge Trap between the Air Pump and the Tank Yes * Float cut out valve to seal the pump suction line Yes * Lubricating system for reducing friction loss Yes * Three sewer cleaning nozzles with varying rearward angles Yes * One nozzle extension for easy fixing of the hose and the nozzle Yes * 5/7 Two stop tank strainer elements Yes * Two sets of operation and service manuals and spare parts lists Yes * Hose guide Yes * Counter Yes * Performance Parameters Warranty Time 24 More than 24.0 Or higher Warranty Distance 5000 * No of Free Service (with consumable) 6 * * Bold specifications are the golden parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.
