GE/U(N)-40/2020-21 REPAIRS TO FLOORING JOINIRES PLASTERING PLINTH PROTECTION BRICK WORK ROOFING IN NCVD AND ASC BN UNDER AGE B/R-II OF GE NORTH UDHAMPUR

Amount

Demolition of cement concrete (Unreinforced) ground floor n.exc 15 cm thickness at any situation for kitchen floor complete all as specified and directed by Engineer-in-Charge.

Dismantling wall and ceiling boards, fibre pulp insulation etc) or insulation boards/slabs/blankets, any thickness, including cover fillets, stuctural steel frame , etc all as specified.

False ceiling with Fibre Cement Designer tile any colour painted (High Pressure Steam Cured) of 6mm and any one of the design (oceanic, lake & hill, cascade or electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanised @! 120 gms, bothsides inclusive) consisting of main T runner with suitably spaced joints to get required legth and 15 x 32mm made from 0.30mm thick sheet and cross T of size 15 x 32 mm made of 0.30mm made of of 0.30mm sheet spaced between main T at 600mm c/c from a grid of 600 x 600mm and wall angle of size 15 x 20mm made of 0.30mm thick sheet and laying false ceilign tiles in the gride including required cutting/ making opening for services like diffusers grills, light suspended form ceiling using GI soffit cleat fixed to existing rafters, purlin etc with dash fastners GI adjustable rods of 3mm dia with galvanised butterfly level clips, spaed at 900/1200mm c/c along main T bottom exposed width of 15mm of all t setion shall be centre blak prepainted with polyster paint and having a load bearing capacity of 12.00 kg per sqm and refixed all existing electric wiring and fixture all as specifed and directed be Engr-in-Charge

Dismantling asbestos cement (corrugated or semi any type corrugated etc) sheet in roof covering including ridges, all as directed.

Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour profile of sheet centre n.exc 200mm and height of profile shall not be less than 30mm having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed by the Engineer-in-Charge.

Pre-painted galvalume aluminium zinc coating GI based GI based of same profile steel steel sheet tile made to cure 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall/Ridge/Valley gutter etc fixed with self tapping screws, complete all as specified and directed by the Engineer-in-Charge.

Galvanised mild steel corrugated mild steel sheeting with two corrugation side lap fixed with L-type or J type hooks 0.63mm complete all as specified and directed by Engineer-in-Charge.

Dismantling of wrought iron or mild steel dia work of any description complete all as specified and directed by Engineer-in-Charge.

Steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conf to IS 1161-1998 grade St-240 complete all as specified and directed by Engineer-in-Charge.

Roof trusses (framed) trusses purlins cranes / ganttries , rails & fastering & heavy bracket cleats (including distanence pleus cuats etc) Fe-410W (Gde-E-250 quality-A) complete all as specified and directed by Engineer-in-Charge.

PCC 1:4:8 type D-2 as in floors 75mm thick complete all as directed & specified.

Machine pressed concrete interlocking paver block glossy finish, any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment over 25mm thick sand cushion all as specified.

Hacking out old broken glass any thickness size quality from wooden frame or steel glazed with putty or fixed with beads complete all as specified and directed by Engineer-in-Charge.

3 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified.

4 mm thick Figured glass, pin head type and glazing with oil putty in squares in not exc 0.5 sq.m in each pane complete all as specified.

Taking down chowkat or frames with shutters (without taking off shutters from the frames) n.exc 1.5 Sqm each complete all as specified.

All as per item above but exceeding 1.5 Sqm and not exc 4 Sqm each complete all as specified and directed by Engineer-in-Charge.

Taking down shutters of any dscription n. exc 1 sqm each complete all as specified and directed by Engineer-in-Charge.

Ditto as above but exc 1 sqm and n. exc 2 sqm each complete all as specified and directed by Engineer-in-Charge.

Pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete , of frame size 125 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified

Pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete , of frame size 105 x 60 mm, complete all as specified

Factory made, 2nd class hard wood rail and style 35 mm thick, plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered partical board with commercial veneering on both sides. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

All as per item above but glazed and skeleton shutter with sash bar for glass / wire gauge.

Providing and fixing 30mm thick factory made PVC flush door shutter consisting of panel of Hollow PVC Profile of 24mm thickness, consisting of frame made out of M.S tubes of 19 gauge thickness and size of 19mmx19mm inserted inside the hollow section of stiles, top and bottom rails and two 19mmx19mm MS tubes inserted horizontally inside the hollow profile section at an equal distance from top and bottom of door and fixed with hollow profile section using 3mm thick Prelam PVC sheet using screws. Hollow PVC profile shall be lipped with 10mm (5mmx2) thick x 24mm width on stiles and rails using solvent cement. The inner panel shall be laminated with 5mm thick termite proof, water proof and fire retardant Prelam PVC sheet using solvent cement on both the sides of the panel etc complete as per direction of Engineer-in-Charge, manufacturer's specification and drawing

Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, in opening as per specifiecation complete all as specified and directed by Engineer-in-Charge.

Mild steel cold rolled butt hinges medium weight 100mm long complete all as specified.

Aluminium anodised barrel tower bolts stove enameled black with bright both 150 mm long complete all as specified and directed by Engineer-in-Charge.

Aluminium handle cost type 150mm long oval type stove enameled black complete all as specified and directed by Engineer-in-Charge.

Easning of old existing windows/doors/ventilators(i. e. opening and closing of windows) including providing projecting hinges , handles ,tower bolt, etc where requiredall as specified and directed by Engr In Charge.

M&L for providing cement concrete 1:3:6 type C-0 using 12.5mm graded crushed stone aggregates for filling in the pressed steel door frame/hold fast complete all as specified.

Dismantling of steel windows/ventilators any description and fixed in any postion including grill etc, complete all as specified and as directed.

Steel windows or ventilators,fixed type,with glazing bars,including a shop coat red oxide of zinc chrome primer, all as specified.

Factory made pressed steel frame steel windows with side hung shutters including box type hinges, steel handle, mild steel ISI marked tower bolt 100mm size (minimum 2 for each shutter) and steel peg stay, complete with glazed bars, dovetailed or welded with one shop coat of zinc chromate primer, complete all as specified and directed by Engineer-in-Charge. Note : Glass panes and guard brass shall be measured and paid for separately

All as per item no 34 above but W/O glazing bar.

Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or FE 310-0 complete all as specified and directed by Engineer-in-Charge.

2nd class hard wood small fittings such as shaped door & window stops, cleat including all necessary labours, articles not exceeding 200 cubic centimetre each complete all as specified.

Preparation of new wooden surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified.

Mild steel barrel tower bolts, stove enamelled black, with bright bolt 200 mm long.

Mild steel pressed steel handle, oval type, stove enamelled black 150 mm long complete all as specified.

Mild steel sliding door bolt plate type 300 mm long stove enamelled black with bright bolt not less 12 mm dia bolt with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, complete

Taking down cement plaster of any description on bricks, PCC block or stone walls, etc. Including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.

15 mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:4 and finished even and smooth mixed with water proofing compound complete all as specified and directed by Engineer-in-Charge.

Supply only integeral water proofing compound complete all as specified and directed by Engineer-in-Charge.

15mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement. complete all as specified and directed by Engineer-in-Charge.

Rendering 5 mm thick in cm 1:3 on ceiling finished even & smooth W/O using extra cement complete all as specified and directed by Engineer-in-Charge..

PCC 1:5:10 type E2 (40mm graded stone aggregate) in mass concrete for lean concrete of WC/ Bath. complete all as specified and directed by Engineer-in-Charge.

25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregates as in floor and finished even and smooth with using extra cement complete all as specified.

Dismantling floor , hearth or wall tiling including cement mortar bedding ( but not backing ), removing serviceable tiles to store and rubbish off the premises, all as specified.

Non-skid ceramic tiles (coloured) 7 to 8 mm thick (square/rectangular) area of each tile exeeding 0.11 sqm but n.exc 0.18 sqm on floor etc. Set and jointed in neat cement slurry and pointed in coloured cement to match including bedding layaers of CM 1:4 (15mm thick) complete all as specified and directed by Engineer-in-Charge.

Vitrified ceramic double charged light shade colured tiles 9-10mm thick (square/rectangular) polished area of each tile exceeding 0.64sqm but not exceeding 1 sqm, laid in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including laying of 10mm thick screed bed or bedding and directed by the Engineer-in-Charge

Vitrified ceramic tiles any colour 10mm thick(Square or rectangular) polished, area of each tile not exceeding 0.36 sqm in floor etc,Set and jointed in neat cement slurry and pointed in coloured cement to match including bedding layaers of CM 1:4 (20mm thick) all as per specified & directed by Engr-In-Charge.

Glazed ceramic tiles (coloured) on vertical surfaces 450x300x6 to 7 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match including rendering 10mm thick cement plaster on fair faceof brick work in cement mortar 1:4 as in backing coat for wall tile complete all as specified and directed by Engineer-in-Charge..

In repairs Vitreous china water closet (Squating Pattern) "Orissa Pattern" size 580x440mm white with 'P' or 'S' trap front or backwith integral foot with pipe (excluding flushing cistern and flush pipe) complete.

In repairs vitreous china wash down water closet pan `P` or `S` trap ( pedestal pattern ) white including fixing bolts,including connection to drain pipe ( or out going pipe) and to flushing pipe,antisyphonage pipe etc complete.

In repair 10 Ltr PVC valveless syphonic action type flushing cistern low level white with inlet including bracket and 32mm flush pipe of polythylene ball valve,float and handleof low or high density and 15mm PVC connection 450mm long s complete all as specified and directed by Engineer-in-Charge.

Steel rolling shutters, without ball bearing, as specified including tip cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated, complete push pull or manual type but gear operated type with bevel gear box and crank handle, complete all as specified.

Repair to steel rolling shutter including greasing, ball bearing, top cover, anchoring rod hasp & staple with safety lever cocks etc complete all as specified and directed by Engineer-in-Charge.

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store 15mm/20mm dia complete all as specified and directed by Engineer-in-Charge.

Refixing old steel tubing and connection in new or old position (wall, Ceiling,Floor, etc.) 15mm bore.

Tubes medium grade 15mm bore galvanised with all fittings and fixed to wall or ceiling complete all as specified and directed by Engineer-in-Charge.

All as per srl item No 61 above but 20 mm bore pipe complete all as specified and directed by Engineer-in-Charge.

In repair 15mm bib taps cast copper alloy fancy type chromium plated with crutch or butterfly handle screwed for iron pipe fixed in repair complete all as specified and directed by Engineer-in-Charge.

In repair Bib tap 15mm standard or PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm 90gms/20mm-125gms) complete all as specified and directed by Engineer-in-Charge.

S&F in repair 15mm stop valves, cast copper alloy with crutch or butterfly handle screwed down high pressure screwed for iron pipe fixed in repairs complete all as specified and directed by Engineer-in-Charge.

In repairRotational moulded polyethlene water storage tanks (cylindrical vergical with closed top) hoisted and fixed in position all as specified in SSR Part I,capacity of water tank 500 Ltr complete all as specified and directed by Engineer-in-Charge.

In repair Rotational moulded polyethlene water storage tanks (cylindrical vergical with closed top) hoisted and fixed in position all as specified in SSR Part I,capacity of water tank 1000 Ltr complete all as specified and directed by Engineer-in-Charge.

In repair for ball brass valves, 15 mm bore high pressure with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule for the following bore complete all as specified and directed.

In repair for ball brass valves, 20 mm bore high pressure with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule for the following bore complete all as specified and directed.

Preparation of old steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete spray painting all as specified.

Marble 16 to 18mm thick machine cut , bedded , jointed and pointed with grey cement slurry including cutting and polishing ( Makrana white) all as specified.

In repair PVC (SWR) pipes single socketed in any length with rubber ring, joints, fixed to walls in repairs 110mm bore complete all as specified and directed by Engineer-in-Charge.

In repair PVC (SWR) bends in any radius 110mm bore in repairs complete all as specified and directed by Engineer-in-Charge.

S&F in repair PVC (SWR) branch piece (SingleY) equal or unequal 110mm bore in repairs complete all as specified and directed by Engineer-in-Charge.

In repair PVC (SWR)pipes single socketed in any length with rubber rings, joints fixed to walls 75mm bore in repairs complete all as specified and directed by Engineer-in-Charge.

In repair PVC (SWR) bends in any radius 75mm bore in repairs complete all as specified and directed by Engineer-in-Charge.

In repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75mm bore in repairs complete all as specified and directed by Engineer-in-Charge.

Preparation of old decorated surfaces of any description by brooming down and applying one coat of white wash on walls including cormices of plastered or un-plastered surface all as specified.

Preparation of old decorated surfaces of any description by brooming down and applying one coat of white wash on ceiling plastered or un-plastered surface all as specified.

washing, rubbing down and stopping of old distempered surfaces and applying one coat of distemper oil emulsion to walls complete all as specified and directed.

Prep of old decorated surfaces and applying two coats of Distemper oil emulsion on walls over a coat of wall care putty including complete removal of existimg treatmenta all as specified.

Complete removal of existing treatment on walls surfaces and applying two coat of cement base paint (colour/white) over one coat cement primer complete all as specified and directed.

Preparing plastered or unplastered new decorated surfaces of walls and applying two coat of oil bound distemper over one coat of birla wall care putty all as specified .

Preparation new decorated surfaces of walls surfaces and applying two coat of cement base paint over one coat of wall care putty over one coat of cement primer all as specified.

Preparation of old decorated surfaces of walls by brooming down with steel wire brushes, scrapping down smoke soot moulds moss and efflorescence salts washing, rubbing down and cleaning oil greasy spots etc and apply one coat of white wash on ceiling complete all as specified and directed by Engr-in-charge.

Priming the sunken floor surface with bitumenous primer @ 0.7 litres / Sqm and applying a coat of semi hot blown 85 / 25 grade bitumen @ 1.2 Kg / Sqm and thereafter supply and laying Polymeric membrane, five layered, of weight not less than 3 Kg per Sqm with centre layer core of 90 micron high molecular density polyethylene film followed by another coat of semi hot blown 85 / 25 grade bitumen @ 1.2 Kg / Sqm blinded with fine sand in dry condition @ 0.5 Kg / Sqm, complete all as specified and as directed.

Cutting chases, pinning in, making good to facing in bricks wall where required and pointing in cement mortar 1:3 to concealed water tubing/stone slab n. exc 10cm girth complete all as specified and directed by Engineer-in-Charge.

In repair Wash hand basin vitreous china white flat back size 580 x 450 mm including pillar cock 15 mm waste chain and plug and porcelain stopper and brackets fixed in repairs including 15 mm PVC connection 450 mm long in repairs complete all as specified and directed by Engineer-in-Charge.

19/20mm thick Block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on one face Ditto complete all as specified and directed by Engineer-in-Charge.

Flush shutters, 25 mm thick ,solid core construction, with block board core and plywood face panels, commercial type on both sides, including beading all as specified.

AL handles 100mm complete all as specified and directed by Engineer-in-Charge.

AL Hasp staples of 100mm complete all as specified and directed by Engineer-in-Charge.

Providing cement concrete in roof kerb type C-1 (1:3:6) for fixing hold fast.

In repair Harrison rails , mild steel curtain rails , chromium plated with fixing brackets, stops, stops rollers etc all as specified.

In repair curtain rods 25 mm dia fancy type metal polished and fixing brackets and holders as requiredall as dericted by Engr In charge.

Demolation of mud in roof any thickness including plastering and leaping complete all as specified and directed by Engineer-in-Charge.

Rendering 15mm thick on fair face of brick work or concrete surfaces with CM (1:4) even & smooth w/o using extra cement complete all as specified and directed by Engineer-in-Charge.

Priming the roof surface with bitumenous primer @ 0.3 litres/Sqm and applying a coat of semi hot blown 85/25 grade bitumen @ 1.2 Kg/Sqm and thereafter supply and laying polymeric membrane, five layered, of weight not less than 3 Kg per Sqm with centre layer core of 90 micron high molecular density polyethylene film and bonded completely to the surface with overlap of 10cm (overlap to be thermo fused by flame) followed by another coat of semi hot blown 85/25 grade bitumen @ 0.7 Kg/Sqm blinded with fine sand in dry condition @ 0.5 Kg/Sqm all as specified and as directed.

Two coats of aluminium paint on roof padding surfaces complete all as specified and as directed.

In repairs plastic water closet seat cover ,white/ black,closed pattern with flats bottom and cover and mild steel chromium plated or aluminium hinging device,of approved make and quality etc complete.

Cast copper alloy, chromium plated hand shower (health faucet) with 8 mm dia, 1.00 metre long flexible tube and wall hook, IN REPAIR, complete all as specified and directed by Engineer-in-Charge..

Chromium plated , water jets to EWC's with flexible pipe, suitable for 15mm bore of pipe and making connections, fixed in repair complete all as specified and directed.

Toilet paper holder of cast copper alloy, chromium plated, fixed as in repair complete all as specified and directed.

In repairs stainless steel sink 1 mm thick with drain board, rawl plug washers and waste pipe including fixing MS angle iron brackets of size 25mm x 25mm x 4mm thick overall size of sink 915 mm x 460mm bowl size 410mm x 330mm x 160mm all as spd & dir

Aluminium extruded section hydraulically door closer regulated designation no-1 universal type suitable for door shutter upto 700mm in width & of weight not more than 35 kg all as specified & directed by Engr-In-Charge.

Towel Ring fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90 gms) complete all as specified and directed by Engineer-in-Charge.

Mortice lock, vertical type, size 100 mm 4 lever complete all as specified and directed by Engineer-in-Charge.

Chromium plated mixing valve, wall mixer 2 in 1 system with provision for both telephone shower and overhead shower complete with wall flange with 1m long bend pipe including three joints to steel pipe or unions. complete all as specified and directed by Engineer-in-Charge.

In repair Chromium plated shower roses with or without swivel joints, any size, including fixint to steel pipe or union complete all as specified and directed by Engineer-in-Charge.

Fixed in repair C P decorative soap dish any type fix to plugs with crumium plated brass screws complete all as specified and directed by Engineer-in-Charge..

Cast copper alloy, chromium plated central hole basin mixer without pop-up system, suitable for 15 mm bore pipe, FIXED IN REPAIR, with service pipes, complete all as specified and directed by Engineer-in-Charge.

Towel Rail 600 mm long of Brass CP fixed with and including Chromium plated brass screws and plastic cleats (Minimum weight 190 gm) IN REPAIR, complete all as specified and directed by Engineer-in-Charge.

In repairs PVC bathroom cabinets quality as approved by Engr-in Charge, of size 600mmx400mm with miirror on front door and with one towel rail for hanging towel of MS chromium plated fixed with screw and wooden gutties etc complete.

Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified.

APARANA ENTERPRISES

Alishan Builders

TULSI RAINA AND SONS