Construction of Toilet at Naldehra, Mashobra Range under Shimla Forest Division SH Construction of Building portion WSI and SI

Amount

Earth work in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth all lead lift and sorting out useful and unuseful material and trasnportation of unsueful material for disposing at dumping site (To be arranged by contractor) as directed by Engineer-in-charge. All kind of soils. (excavation needs to be done manually)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:5:10 (1 cement: 5 fine sand: 10 graded stone stone aggregate 40mm nominal size) complete including carriage of material within all leads and lifts as per direction of engineer-in-charge

Supplying,filling,spreading & leveling stone boulders of size range 5cm to 20cm, in recharge pit, foundations under plinths, floors etc. in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.

Supplying,filling, spreading and leveling gravels of size range 5mm to 10mm, in recharge pit/soak pit, foundations under plinths, floors etc. hand packing/compaction in required thickness, for all leads & lifts all complete as per direction of Engineer in Charge.

Filling available excavated earth (excluding rock) in trenches, plinth sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50m and lift up to 1.5m

Centering and shuttering including strutting, propping etc and removal of form for foundations, footing, bases of columns etc for mass concrete Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

Providng and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement- All work up to plinth level 1:1.5:3 (1 Cement: 1.5 Coarse sand): 3 graded stone aggregate 20mm nominal size)

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete up to plinth level. Mild steel and medium Tensile steel bars

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 5622 of approved make, in all colors and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand), joining with grey cement slurry @ 3.3 Kg/sqm including grouting the joints with white cement and matching pigments etc, complete (Shade and color of the tile as per direction of DFO Shimla)

Supplying and fixing slotted cowl (terminal guard) 100 mm dia

Providing and fixing 18 mm thick gang saw cut, mirror polished, pre moulded and prepolished, machine cut for kitchen plaforms, vanity counters, windowsills, facias and similar locations of require the size, approved shade, colour and texture laidover 20 mm thick base cement mortar 1:4 (1 Cement : 4 Coarsesand) joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc complete at all levels

supplying and fixing in position of manhole cover cost including labour, material and transportation completed as per standard drawing and standard technical specification including all other incidental charges

Constructing soak pit 1.20 X 1.20 X 1.20 m filled with bricbats/stones including S.W. drain pipe 100 mm- 110mm diameter and 1.20 m long complete as per standard design

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes having thermal stability for hot and cold water supply, including all CPVC Plain & brass threaded fittings, including fixing the pipe with clamps at 01.00m Spacing, this includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints, concealed and non concealed work complete as per direction of Engineer-in-charge 20 mm nominal outer diameter pipes (distribution)

32mm nominal outer diameter pipes (from source to water tank and from water tank to distribution pipes)

Providing and fixing ball value (brass) of approved quality, High or low pressure, with plastic floats complete

Providing and fixing float valve of approved quality, High or Low pressure, with plastic floats complete.

Providing and fixing c.p brass bib cocks approved wuality, High or Low pressure, with all fittings of approved brand cera/hindware/jaguar/or equivalent as per direction of engineer/officer in charge For wash basins

Providing and fixing c.p brass bib cocks approved quality,high or low pressure with all fittings of approved brand

Providing and fixing C.P Brass angle valve 15mm complete

Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make hindware approved shape, size and pattern including integrated white vitreous china cistern of capacity 10 ltr with dual flusing system, including all fittings with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection including P/S trap, complete in all respect as per directions of Engineer-in-Charge. Cera/hindware/jaguar/or equivalent

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32mm. Waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 550 X 400 mm cera/hindware/jaguar/or equivalent

Providing and fixing water closet squatting pan (Indian Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430 X 260 X 350 mm and 340 X 410 X 265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P brass spreaders with brass unions and G.I clamps complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required cera/hindware/jaguar/ or equivalent

Providing and fixing stone slab with table rubbed, edges rounded and polished of size 75 X50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-Charge and finished smooth Granite stone of approved shade

Providing and fixing 8 mm dia C.P./S.S Jet with flexible tube upto 1 meter long with S.S. Triangular plate to European type W.C of quality and make approved by Engineer-in-charge

Providing and fixing Polyvinyl Chloride (PVC) pipes, having thermal stability for hot and cold water supply, including all PVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This inlcludes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints, concealed and non-concealed work complete as per direction of Engineer in Charge 110 mm soil pipes from WCs, urinals to septic tank

75 mm waste from wash basin etc

50 mm other waste

Providng and fixing C.P Brass soap Dish Holder having concealed fitting arrangement, weighing not less than 106 gms

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with wooden molded frame of approved make and shade with 6mm thick hard board backing: rectangluar shape 1500 X 450 mm

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with holdfast lugs or with dash fasteners of required dia & length (holdfast lugs or dash fastner shall be paid separately) (Wood sleepers will be provided by the Department)

Providing wood work in trusses, purlins, rafters, post, post plates, wall plates, principle rafters, common rafter edge beams, ridge beams, wooden battens under slates roofing etc and the like wrought framed hoisted and fixed in position, including heavy duty metal plates, screws, nut and bolts for connection complete as per engineer in charge. (Wood sleepers will be provided by the Department)

Stone work in plain ashlar in super structure up to floor five level in cement mortar 1:6 (1 Cement : 6 coarse sand) including pointing with cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matcing the stone shade One face dressed, sand stone 0.30 meter wall outside and inside dressed stone) choice of the stone will be as per the direction of DFO SHIMLA

Slate roofing with 7.5 cm single lap single lap single layer fixed on wooden batten (wood work to be paid separately) With slates 40 X 20 cm size

Providing and fixing wire guage shutters using glavanized M.S wire guage of average width of aperture 1.4 mm in both directons with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws 30 mm

Providing and fixing paneled or paneled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding paneling which will be paid for separately, all complete as per direction of Engineer-in-charge. (wood sleeprs will be provided by the department) main Entry Door X 2 (40mm) Cubicle door X 5 (open top) (35MM)

Providing and fixing brass tower bolts for doors and windows 150 X 10mm

Providing and fixing chromium plated brass door handles for doors and windows 125 mm

Providing and fixing chromium plated brass night latch of approved quality including necassry screws etc complete

Providing and fixing chromium plated brass 100mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete

Providing and fixing wooden plank ceiling with tongued and grooved jointing and wood screws (frame work and cover fillets to be measured and paid for separately) and barge board fascia soffits complete as direction of engineer-in-charge 1st class deodar wood 20 mm (wood sleeper will be provided by the department)

Providing SS brackets of appropriate size with necessary SS bolts, nuts and washer etc for fixing wood partition boards for toilet cubicles with walls

Providing and fixing steel legs to elevate partion wood from direct floor contact

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 Cement: 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with Cement mortar 1:6 (1 Cement : 6 coarse sand )

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover sand suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank (Triple layer)

Polishing two coats with polish on new wood and wood based surfaces like wood beam eaves board ceiling etc. to give an even surface including cleaning the surface of all dirt, dust and sand papared smooth and including a coat of wood filler. Ready mixed PU Exterior water bases polish matt finish of approved brand and manufacture including epoxy primer etc complete as per direction of Engineer-in-Charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 Cement: 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size)

Vinod Kumar (BID ID -547397)

kewal kumar (BID ID -547499)

LOKENDER VAZEER (BID ID -547568)