The work of construction of 6 ML RCC GLR at Kacharakanahalli, Bangalore

The work of construction of 6 ML RCC GLR at Kacharakanahalli, Bangalore

Clearing and grubbing land including uprooting rank vegetable grass,bushes, shrubs, saplings and trees upto 300mm girth by manual means, in areas of light jungle, removal of stumps, disposal of unserv...

Earth work in surface excavation for stripping, seating of bund, Road way, by manual means for lowering & leveling the ground for all works other than foundation & depth in all kinds of soil not excee...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

In ordinary/soft rock without blasting upto 1.5 m depth

In ordinary/soft rock without blasting Depth exceeding 1.5 m, but not exceeding 3 m

Earth work excavation for pipeline trenches by mechanical means as per drawing and technical specification, including setting out, construction of shoring, strutting, cost of blasting materials, barri...

Earth work excavation for pipeline trenches by mechanical means as per drawing and technical specification, including setting out, construction o shoring, strutting, cost of blasting materials, barric...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Removal of Unserviceable Soil with Disposal upto a suitable

distance as directed by the Engineer incharge of work

Granular Sub-Base-Plant Mix Method

Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in u...

Providing and laying insitu vibrated plum concrete M-15 using approved, clean, hard graded aggregates and plums including cost of all materials, machinery, labour, cleaning, batching, mixing, placing ...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Supplying and laying of bi-axial extruded high module polypropylene geogrid conforming to MORT&H specification for base/sub base reinforcement having minimum tensile strength 40kN/m in the longitudina...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure worksof bridges upto 3.50 m height. The granite/trap...

Percentage Additionalities for Formwork,

Centering & Scaffolding. For foundation upto plinth

for PCC and Raft

Percentage Additionalities for Formwork,

Centering & Scaffolding. For Dam and allied works

for wall(water retaining structure)

Percentage Additionalities for Formwork,

Centering & Scaffolding. For RCC roof slabs

for GLR Top slab

Percentage Additionalities for Formwork,

Centering & Scaffolding. For RCC roof slabs

for pump room and head room slab

Percentage Additionalities for Formwork,

Centering & Scaffolding. For RCC columns/shaft (slip concreting)

for GLR & inernal staircase columns

Percentage Additionalities for Formwork,

Centering & Scaffolding. For pump room, head room and external staircase columns

Percentage Additionalities for Formwork,

Centering & Scaffolding. For RCC beams, lintels and throughs of aqueducts

for Internal staircase beams

Percentage Additionalities for Formwork,

Centering & Scaffolding. For RCC beams, lintels and throughs of aqueducts External staircase beam, pump room beam & head room beam

Percentage Additionalities for Formwork,

Centering & Scaffolding.for Staircase and other similar structures. For Internal stair case

Percentage Additionalities for Formwork,

Centering & Scaffolding.for Staircase and other similar structures. For external stair case

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to RCC structures like floor and walls of reservoirs, sewe, effluent and water treatment plants,...

Providing and applying crystalline mortar by mixing in the ratio of 4.5 : 1 (4.5 parts integral crystalline mortar : 1 parts water) for treatment of faulty construction joints, cracks, tie rod holes, ...

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...

Providing and fixing of 2track x 2panel sliding windows made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6 PHR with TPE (Thermo Plastic Elasto...

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 m...

Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. compl...

Providing and fixing PVC water stopper of suitable type of 230 mm width and 5 mm thickness for construction joints as per detailed technical specifications and as directed by Engineer-in-charge.

Polyurethane based Single Component for New Surface

Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/...

Providing and fixing 150mm dia. Cast Iron pipe for ventilatiing shaft 1m high with specials and cowl and with suitable grips in CC 1:2:4 pillar using 10mm to 20mm graded hard granite, with 15 cms. thi...

Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includ...

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement:4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, inc...

Providing and fixing 110 mm dia - 6kg/cm2 PVC rain water pipes as per IS: 4984 including all fixtures such as brackets, bends etc.as directed by the Engineer.

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a primi...

Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on sp...

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on sp...

Providing & Fixing of DI Resilient seated soft sealing sluice valve with body,bonnet of Ductile Iron of grade GGG50,Wedge fully rubber lined with EPDM & seals of NBR and the valves should be vaccum ti...

Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of Ductile Iron (DI) conforming ti IS-1865 with the latest amendments and of grade GGG 40/50, shaft...

Manufacturing, providing, trasporting, rolling, lowering, laying,

jointing and commissioning of ERW (Electric Resistance Welded)/

SAW (Submerged Arc Welded) MS pipes of Outer dia (Fe-410 grade)

Manufacturing, providing, trasporting, rolling, lowering, laying,

jointing and commissioning of ERW (Electric Resistance Welded)/

SAW (Submerged Arc Welded) MS pipes of Outer dia (Fe-410 grade)

Manufacturing, providing, trasporting, rolling, lowering, laying,

jointing and commissioning of ERW (Electric Resistance Welded)/

SAW (Submerged Arc Welded) MS pipes of Outer dia (Fe-410 grade)

Manufacturing, providing, trasporting, rolling, lowering, laying,

jointing and commissioning of ERW (Electric Resistance Welded)/

SAW (Submerged Arc Welded) MS pipes of Outer dia (Fe-410 grade)

Manufacturing, providing, trasporting, rolling, lowering, laying, jointing

& testing and commissioning of MS specials of minimum 8mm thick

such as bends, tail pieces, reduces etc. conforming to IS-732...

Manufacturing, providing, trasporting, rolling, lowering, laying, jointing

& testing and commissioning of MS specials of minimum 8mm thick

such as bends, tail pieces, reduces etc. conforming to IS-732...

Providing and fixing DI/CI puddle flanges conforming to IS 7181-1986

with latest ammendments., in position for RCC walls including hoisting

and conveying them to work spot with all lead and lifts etc....

Providing and fixing DI/CI puddle flanges conforming to IS 7181-1986

with latest ammendments., in position for RCC walls including hoisting

and conveying them to work spot with all lead and lifts etc....

Providing and fixing DI/CI puddle flanges conforming to IS 7181-1986

with latest ammendments., in position for RCC walls including hoisting

and conveying them to work spot with all lead and lifts etc....

Construction of Granular Sub-Base of required grading as

per design spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with front end loader at OMC and com...

Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant carriage of mixe...

Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.90 kg per m2 using mecha...

Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface cleaned with mechanical broom

Providing and laying Dense Graded Bituminous Macadam with 100 TPH capacity HMP batch type using crushed aggregates of specified grading, premixed with bituminous binder VG-30, @ 4.5 per cent by weight...

Providing and laying Bituminous Concrete with 100 TPH

capacity hot mix plant batch type using crushed aggregates of

specified grading, premixed with bituminous binder VG-30 @

5.2 per cent of mix and f...

Earth work excavation by manual means for drains,canals, waste weir,draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and tec...

Providing and laying in position plain cement concrete for levelling coursefor all works in foundation. The granite/trap/basalt crushed graded coarseaggregates and fine aggregates as per relevant IS C...

Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...

Form work for centering

For Foundation upto plinth

b.all other types

Form work for centering

For Cement concrete drain walls

Form work for centering

For drain Top slab

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, ty...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Removal of Unserviceable Soil with Disposal upto a suitable distance as directed by the Engineer incharge of work

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications,including setting out, shoring, strutting, barricading, caution lig...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications,including setting out, shoring, strutting, barricading, caution lig...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Percentage Additionalities for Formwork,

Centering & Scaffolding. For isolated footings

Percentage Additionalities for Formwork,

Centering & Scaffolding. For Beams

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, ty...

Providing and laying in position reinforced cement concrete of design mix M20 with OPC cement @ 320 kgs/cum with 20 mm and down size graded granite metal coarse aggregates @ 0.69 cum and fine aggregat...

Providing and erecting in position, 2400 x 600 x 60 mm size precast slab panels of M25 grade design mix reinforced cement concrete with OP cement @ 320 kgs/cum, 20mm and down size graded granite metal...

Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 m openable length ( total length 90 m), having 50 nos rounds per 6 m length, upto 3 m height of wall with e...

Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...