Multipurpose work in District Level IDSP Laboratory at Govt. Hospital, Diu

Amount

Works

Providing and fixing 35 mm thick shutters for Doors, windows and clear story windows including anodised alluminium butt hinges with necessary screws. (A) Indian Teak Wood(iii) Partly panelled and partly glazed

Providing and laying marble stone slab flooring over 20mm (average)base of cement mortar 1:6 (1-cement : 6 coarse sand) or L.M. 1:1.5(1- lime putty : 1.5 - coarse sand) laid and jointed with gray cement slurry including rubbing and polishing complete. (A) Marble slab 25mm thick

White Stone Bela mesonry block in course in Superstructure with stone of approved quality in Cement Mortar1:5 (1Cement :5- course sand) including packing the joints etc. complete.

Providing 20mm thick cement plaster in single coat on single or half brick walls for interior plastering upto floor two level and finished even and smooth in (i) Cement mortar 1:3 (1-cement:3-sand)

Providing and fixing storage units of full/ low height as per drawing. They shall consist of 18mm thk. 303 MR ply top, sides, bottom, shelves and shutters & 8mm thk 303 MR ply for back. The bottom of the storages shall be at 75mm from FFL. The shutter with box type hinges of approved make & teak lipping finished with melamine polish with approved Veneer on all the shutter edges. Division of the shutters shall be made equally according to the length of the storages. All the external surfaces including back shall be finished with Veneer with Melamine polish of approved make. 18mm thk. 303 MR Ply shelves at 16” interval (approximately / divided equally) shall be provided. All inner surfaces shall be finished with laminate including the shelves. Rate shall be inclusive of all necessary approved fittings like hinges, locks, 150mm long SS brushed finish handles, tower bolts, and any necessary hardware items. all complete in all respects and to the entire satisfaction of EIC

Applying two coats of Birla or Asian (or equivalent) acrylic lapy ( putty) & two coats of primer of approved brand and manufacture on new wall surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth.

Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surface to give an even shade including throughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth.

Pro. And fixing single layer water proof gypsum board 12.5 mm thick sections using water proof board of size 1220 mm x 1830 mm x 8.0 mm suspended by GI suspender channel of size 25 mm x 3 mm with intermediate channel og size 18 mm x 40 mm x 0.8 mm at 1220 mm center to center ceiling section of size 40 mm x 35 mm x 0.55 mm at 457 mm c/c and perimeter channel A of size 20 mm x 27 mm x 30 mm x 0.5 mm at edges & drops incl.paper tap sand sofit cleat, anchor fastener, scoch bolt connecting cleat,joining compound top coat on ceiling incl.making necy.opening for light fitting,diffuser etc. comp. as per detail drawing as directed

sky world enterprise (BID ID -9472)