Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.8 LAccepted-AOC SRIKONA POTAPOLA CHHAKA CHANDIPUR ROAD BALASORE ODISHA 756025 | BALASORE | BALASORE | ODISHA | 756025 | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹44.2 L+₹3.1 L (7.49%)Rejected-Finance PADHUANPADA PROOF ROAD BALASORE ODISHA 756001 | BALESHWAR | ODISHA | 756001 | L2 | Rejected-Finance Not being lowest | |
| 3 | L3₹44.3 L+₹3.2 L (7.78%)Rejected-Finance SHOPING COMPLEX CHANDIPUR BALASORE 756025 | BALESHWAR | ODISHA | 756025 | L3 | Rejected-Finance Not being lowest | |
| 4 | L4₹44.5 L+₹3.4 L (8.25%)Rejected-Finance | L4 | Rejected-Finance Not being lowest | |
| 5 | L5₹44.8 L+₹3.7 L (9.12%)Rejected-Finance | L5 | Rejected-Finance Not being lowest |
Tender Value
₹41.2 L
EMD Value
₹82,400
Closing Date
20 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER
GE I R and D Chandipur Post Chandipur PIN 756025
ADDITION ALTERATION TO 06 NOS ENTRANCE GATE WALL AND RAISING OF APPROCHES AT OT ROAD COLONY BALASORE
2023_MES_592387_1
8809/CDP
Open Tender
Civil Works
Item Rate
180 days
Balasore
As per tender documents
8 documents required · 8 mandatory
₹500
GE I R AND D Chandipur
₹82,400
Yes
30 Jun 2023
29 Apr 2023
22 May 2023
29 Apr 2023
20 May 2023
13 May 2023
Amount
NOTE (Applicable for all items) :- The bidders/contractors are advised to read tender document & all corrigendum / amendments and General conditions of contracts before entrying/quoting the rates.
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
M&L for PCC of 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size derived from natural sources) all as directed by Engineer-in-Charge.
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as directed; for the grades of Concrete of M-25 grade with minimum cement content of 330 kg /cum
Providing and laying for RCC drain cover of M-25 grade design mix concrete in position excluding the cost of centering, shuttering, finishing and reinforcement complete all as directed.
M&L for Precast reinforced cement concrete type B0, 1:2:4 (12.5 mm graded aggregate) in door and windows frames, any size, single or double rebated, including ar?rangement for fixing of hinges and fixtures as required
M&L for Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases for columns complete all as directed.
M&L for Centering and shuttering including strutting, propping etc. and removal of form work for Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc. complete all as directed.
M&L for Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform complete all as directed.
Steel reinforcement of Thermo-Mechanically Treated bars of grade Fe-500D or more. for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete all as directed.
M&L for Moorum/red bajri filling in foundation or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as directed.
Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achievethe desired density, complete all as specified and as directed.
Providing and applying On W.B.M / W.M.M. @ 0.40 kg/sqm tack coat using bitumen emulsion conforming to IS:8887, using emulsion pressure distributer including preparing the surface & cleaning with mechanical broom.
Providing and laying bituminous macadam using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site by tippers, laid over a previously prepared surface with mechanical paver finisher to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, for 50 to 100 mm average compacted thickness with bitumen of grade VG-30 @ 4% (percentage by weight of total mix) prepared in Batch Type Hot Mix Plant complete all as specified and as directed.
Providing and applying On bituminous surface @ 0.25 kg/sqm tack coat using bitumen emulsion conforming to IS:8887, using emulsion pressure distributer including preparing the surface & cleaning with mechanical broom.
Providing and laying semi- dense Bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with mechanical paver finisher to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density for 40 mm compacted thickness with bitumen of grade VG-30 @ 5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of Aggregate) prepared in Batch Type Hot Mix Plant complete all as specified and as directed.
Providing and laying semi- dense Bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with mechanical paver finisher to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density for 30 mm compacted thickness with bitumen of grade VG-30 @ 5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of Aggregate) prepared in Batch Type Hot Mix Plant complete all as specified and as directed.
S&F for New work 2.5mm thick thermoplastic Painting road surface marking with adequate nos of coats to give uniform finish with ready mixed road marking paint conforming to IS : 164, on bituminous surface in white/yellow shade, including cleaning the surface of all dirt, scales, oil, grease and foreign material etc. complete.
Providing and laying 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern,factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as directed.
Dismantling stone slab/wall flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead, all complete as directed.
Stone tile (polished) work Granite of any colour and shadefor wall lining over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement complete.
Demolishing brick work In cement mortar manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as directed.
M&L Brick work with non modular fly ash bricks with Cement mortar 1:6 (1 cement : 6 coarse sand) complete all as specified and directed.
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead complete all as directed.
M&L for 15 mm thick cement plaster in CM 1:6 on brick wall and finished the surface even and smooth without using extra cement complete all as directed
M&L for finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two coat of weather coat paint applied @1.67 ltr/10 sqm over and including priming one coat of exterior primer applied @ 2.20 kg/ 10 sqm) including preparation of surface.
Supply and fix 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls including necessary brackets clamps or laid in trenches complete all as specified and as directed.
Supply and fix 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls including necessary brackets clamps or laid in trenches complete all as specified and as directed.
Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead complete all as directed.
Providind and fixing of Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, grill, ladder, railings, brackets, gates and similar works complete all as directed.
Excavating holes more than 0.10 cum & upto 0.5 cum including getting out the excavated soil, then returning the soil as required in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering etc, disposing of surplus excavated soil, as directed within a lead of 50 m and lift upto 1.5 m All kinds of soil complete all as directed.
M&L plaing cement concrete 1:3:6 (1 cement : 3 coarses and derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) in post hole, struts, bed blocks, anchor blocks etc. complete all as specified and directed.
M&L Painting New Steel work with Synthetic Enamel Paint (Grade-I) to give an even shade. Two coat applied @ 0.90 ltr/10 sqm over an under one coat of red oxide primer applied @ 0.80 ltr/10 sqm of approved brand and complete incl preparation of surface all as specified and directed.
M&L for Painting on steel surface paint with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade One or more coats on old work complete all as directed.
S&F PVC Sheet 1.80 mm thick including necessary fixing to MS frame work for external wall View Cutter all as specified and directed.
Taking down of existing Gate and re-fixing in existing opening including embedding Gates in floors or walls cutting masonry for holdfasts, embedding (Each gate 06 Nos hold fasts) in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as required complete, including disposl of rubbish to the dumping ground, complete all as directed.
Providing Retro-reflective regulatory sign board of size n.exc 1.50 Sqm area made out of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated lens type retro -reflective sheeting as approved by Engineer-in?charge. Letter, symbols, borders etc. will be as per IRC - 67 with required colour scheme on the boards and with the high intensity grade A. The aluminium sheet to be riveted to M.S. frame of angle iron of size 40x40x4 mm. The boards will be fixed to 1 No. 50x50 mm square post made of M.S. angle 50x50x4 mm, 4 m long welded to the frame with adequate anti-theft arrangement .Sheet work to be painted with two or more coats of synthetic enamel paint over an under coat (primer) and back side of aluminium sheet to be painted with two or more coats of epoxy paint including appropriate priming coat complete in all respects as directed.
MS SUBHAM ENGINEERING AND CO
MS VIDYANJALI
Rounaq Enterprise
jlenterprise
DS ENTERPRISES
RANA ENTERPRISES
Bidder Name
RANA ENTERPRISES
DS ENTERPRISES
Rounaq Enterprise
MS VIDYANJALI
jlenterprise
MS SUBHAM ENGINEERING AND CO
bholanath bera
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .