CWE/D-30/2024-25

Amount

M&L for complete removal of existing treatment from old decorated wall/ceiling by scraping with mechanical vaccum based sanding machine (wall sanding machine with internal dust extraction system & having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 80 grit having dia of 7 ich/ 9 inches to make the surfaces free from dust, loose paint etc by using smart periodical methodology/auto roller, while authorise applicater complete in all respect as specified and directed by Engr-in-charge

M&L for applying water proof cement based putty @ 1kg/sqm of avg thickness 1mm over the plastered /old painted wall/ceiling surface even and smooth complete and sanding the putty surface with mechanical wall sander(having mechanical vaccume mechanism having RPM not less than 1500, sanding pad of 240 or above to make the surface free from dust by authrised applicater complete in all respect as specified and directed by Engr-in-charge and as per following:- step:1. mix the putty powder by adding water as per manifacturer instruction and mix it with putty mixture with mixing capacity of min 2.5kg putty/min. 2. Apply the first coat of prepare mixture with the help of fully automatic airless spray machine of putty application having flow speed of max 6lits/min with a max pressure of 3300PSI. 3. Allow 6-8 Hrs time to dry putty surface.

M&L for preparation of old treated surface and applying one coat of oil emulsion distemper on wall surface using airless spray technology with max working presssure of 3300PSI and capable to operating single spray gun with max material whole length of 30mtr. The spray machine should be reported manufacturer with pro-gaurd technology and capability of tracking pressure and paint uses and certified by paint manufacturer and accesosries for applying distemper should be able to spray in hard to reach areas penetration of distemper on the surface by smart periodical methodology/ auto roller, complete in all respect as specified and directed by Engr-in-Charge.

M&L for applying priming paint followed by two coat of internal emulsion paint, anti-fungal and anti-bacterial (Asian- Royale or equivalent of approved make as approved by GE) on wall surfaces using airless spray technology with max working presssure of 3300PSI and capable to operating single spray gun with max material whole length of 30mtr. The spray machine should be reported manufacturer with pro-gaurd technology and capability of tracking pressure and paint uses and certified by paint manufacturer and accesosries to be able to spray in hard to reach areas penetration of paint on the surface by smart periodical methodology/ auto roller, complete in all respect as specified and directed by Engr-in-Charge.

All as per ser item No.4 above but on ceiling surface.

M&L for preparation of old surfaces and applying one coat of plastic emulsion paint on walls by using smart periodical methodology complete all as specified and as directed by Engr-in-Charge

M&L for complete removal of existing treatment from old decorated walls by scraping with mechanical sander of asian paints trucare wall sander or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scarping tools where mechnical removal is not possible complete all as specified and directed by Engr-in charge and two coat of weather proofing exterior emulsion paint (Apex Ultima Luxury emulsion of Asian or equivalent of approved make as approved by GE) incl one coat of exterior primer up to 5 story bldg by using smart periodical methodology (spray machine) complete all as specified and directed. Note:- rate quoted up to G+4 bldg including scaffolding.

M&L for preparation of old painted wood or wood based surface of any description over 10cm width or girth by removing all dirt,dust,rust and grease,stopping and filling the holes and patches the requisite surface and applying one coat of synthetic enamel paint by using smart periodical methodology/ auto roller, complete in all respect as specified and directed by Engr-in-Charge.

M&L preparation of old painted steel and iron surface of any description not otherwise described over 10 cm width or girth by removing all dirt,dust,rust and grease,stopping and filling the holes and patches and painting with one coat of synthetic enamel paint by using smart periodical methodology/ auto roller, complete in all respect as specified and directed by Engr-in-Charge.

M&L for preparation of old decoracted concrete surface by brooming and removing all loose layers of old treatment, efflorescence soot and moss by wire brush and filling all nails holes and patches with cement based wall care putty and applying one coat of synthetic enamel paint on old plastered surface in different colours such as PCC Kerbstones, footpath kerb, brick, concrete work etc by smart periodical methodology/ auto roller, complete in all respect as specified and directed by Engr-in-Charge.

M&L for preperation of pathway/flooring(over interlocking/chequired tile surface) or any type of surfaces old/new or any position by brooming and removing all loose layers of old treatment, efflorescence soot and moss by wire brush and filling all nails holes and patches with cement based wall care putty and applying one coat of floor paint of superior quality complete all as specified and as directed.

M&L preparation of old treated wooden surface and polishing melamine polish on the veneer and Burma teak wood including wood filler with two or more coats of polishing complete all as specified and as directed by Engr-in-Charge

Taking down cement plaster on brick or concrete surfaces including raking out joints, hacking for key scrubbing down with water etc. and removal of debris out side of MoD Land complete in all respect as specified and directed by Engr-in-charge

M&L 15mm thick Ready mix cement plaster with bulk density 1.4 to 1.7 kg per ltr, water ratio 17 to 19% by weight with compressive strength as per IS 4031 part -VI on brick work or concrete surfaces of wall as per manufacturer instruction finished smooth and even complete all as specified and as directed

M&L 5mm thick Ready mix cement plaster with bulk density 1.4 to 1.7 kg per ltr, water ratio 17 to 19% by weight with compressive strength as per IS 4031 part -VI on brick work or concrete surfaces of ceiling as per manufacturer instruction finished smooth and even complete all as specified and as directed

M&L for preparation of newly plastered surface of wall and applying two coat of weather proofing exterior emulsion paint (Apex Ultima Luxury emulsion of Asian or equivalent of approved make as approved by GE) incl one coat of exterior primer by using smart periodical methodology (spray machine) complete in all respect as specified and directed by Engr-in-charge.

M&L for preparation of new plastered surface of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer by using smart periodical methodology (spray machine) complete all as specified and as directed by Engr-in-Charge

M&L for preparation of new plastered surface of ceiling and applying two coat of oil bound distemper by using smart periodical methodology complete in all respect as specified and directed by Engr-in-charge.

M & L for washed stone grit plaster on exterior walls in two layers, under layers 12 mm thick cement plaster 1:4 (1 cement :4 coarse sand) following the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer with 15 mm thick cement plaster 1:1/2:2 (1 white cement: 1/2 coarse sand:2 coloured marble stone chipping 10mm nominal size) including using Colour pigment & marble powder as required, in panels with groove all around as per approved pattern and water to expose the stone chippings including forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove by using smart periodical methodology (spray machine) complete all as specified and as directed.

M&L for forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens,nailed to the under layer incl removal of wooden battens, repairs ot the edges of pannel and finishing the groove complete all as per specified and as directed.

S & F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as per specified and as directed.

S & F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing. complete all as per specified and as directed.

M & L for complete removal of existing treatment from old decorated wall surface scrapping by electrically operated grinder machine from decorated wall surface by scrapping and applying a coat of cement based wall care putty on complete surface and applying a texture finish of approved shade/colour/pattern/texture over incl a coat of oil based primer complete all as per specified and as directed.

Dismantling of wall and ceiling boards(fibre, pulp, insulation,etc) or insulation boards/slabs/blankets/,any thickness,incl cover fillets

Providing & fixing false ceiling with fully perforated 12mm tk micro tegular edged or 10mm tk square edged GRG false ceiling tiles at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture,design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main- T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and Lshape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in- Charge

S&F RAJSHRI brand factory Made WPC railing combining WPC board/fancy designer type grating and WPC frame 100% Solid WPC ( Wood polymer Composite ) railing of required length and of 2' to 2.5' ht, comprising of virgin PVC resin of K Value 58-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from single Extrusion process, WPC foam sheet Single Extruded (Inner ) with having minimum density not less than 650 kg/cbm and WPC frame having min density 780kg/cbm manufactured by RAJSHRI an ISO 9001-2015 certificate company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2, Modulus of elasticity 850N/ mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Resistance. For WPC railing WPC Jali to be fixed with WPC frame of size 75 x 50mm size with necessary support vertical frame length incl demolition of existing RCC jaali with necessary full body threaded star headed counter sunk SS Screws complete all as specified and as directed of Engineer -In-Charge.

S& F Mild steel framed work such as grills,grating, gates,etc, with ends of bars shoulder and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; rallings; framwork of watertank and similar articles conforming to Fe-290 Gde E-165, complete as per directed by Engr-in-Charge.

Dismantling wall tilling incl cement mortar bedding and rubbish off the premises complete all as specified as directed by Engr-in- charge

M & L for glazed coloured ceremic tiles in vertical surface 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface incl 10mm tk in cement mortar 1:4 even and fair for receiving tiles on vertical surface complete all as specified as directed by Engr-in- charge

S & F 10mm thick toughened glass as in partition / fixed window incl diamond edging all sided , attaching , lining and by sand blasting . Incl CP "L' or "U" heavy duty clamps suitable for fixing of glass , min 4 nos per Sqm all as specified and directed by Engr-in-charge.

S & F 10mm thick toughened frosted glass door shutters of size area exc 1.50 Sqm but n.exc 3 sqm incl necessary floor spring hydraullically regulated, otherwise fixed on pivot.CP fitting and fixtures , CP handles , CP locking arrangement , necessary cutting & holes moulding and fixed in complete as specified and directed by Engr-in-charge.

Taking down of Chowkhats or frames(without taking off shutters from frame)area not exc. 1.5sq. m each incl builders hardware fitting complete all as specified and as directed

Taking down of Chowkhats or frames(without taking off shutters from frame) area exc 1.5 sq. m but n exc 4 sq. m each incl builders hardware fitting complete all as specified and as directed

S & F in repairs of 4mm th ACP( Al composite panel) cladding of approved quality and colours as approved by GE, Fixing in MS frame at any ht and incl MS frame of size n.exc 0.36 Sqm ( used in rectangular tubes of size 50.8mmx25.4mmx2.9mm th or square tubes 38mmx 38mm x2.9mm th are used in frame) and filling the joints with all weather silicon sealant incl all mouldings,cutting,etc complete all as specified and directed.

M & L for ceiling panels:- Pre- fabricated modular ceiling panels, 50mm th , with sloping panels PUF panels,between one sheets of 0.8mm & one sheet 0.5mm PPGI ( pre painted galvanized steel) having PUF density of 40kg/m3 with proper supports. Wall panels shall be fixed to the floor with channels & anchor fastners and interlocked with each other through CAM LOCK sys.Ceiling panels shall be supported with wall panels through L type flashing, CAM LOCK sys and ceiling support sys as required. Panels incl cut outs for lights, pendants, electrical switch sockets etc. Antibacterial& Antifungal paint coating supply and installation of jointless coating for wall ceiling and corner panels, filling of all joints and cavaties with metal epoxy fillar and sanded flush to provide a seamless finish incl one primer and three coats of antibacterial and anti fungal paint equivalent to a min dry film thickness of 300 micron including taking down of old unserviceable panel complete all as specified and as directed.( Paint- SKK Japan/acro/dulux)(PPGI sheet make- TATA steel/jindal/JSW ( Make- MHS/CHP/MR)

M&L for preperation of new plaster surface applying texture finish of approved shade/colour/pattern/texture, over and incl a coat of oil based primer over 3mm wall care putty complete all as specified and directed.

M&L for Removing of vegitation growth cutting of shrubs plant or tree of girth not exc 30 cm incl roots from wall and roof of bldg,mouth of rain/waste water pipe for building height upto 15 mtr including necessary scaffolding works, cutting of wall/roof etc to remove complete root of vegetations and applying chemical blue vitriol at the root of vegetation and making good the damaged portion with CM 1:3 or PCC 1:2:4 & two coats of cement base paint etc complete all as specified and directed by Engr-in-charge.

Supplying and applying Single component Acetate polymer based flexible liquid UV resistance waterproof coating(for roof) @ 1.1 Kg/Sqm in two coats by brush , roller or airles spray for maintaining thickness of 1 mm having Elongation 200%-250% & Tensile strength 2.9Mpa, Bond strength to primed concrete 4.5 MPa and Crack briding up to 2.6 mm . The system includes one coat of cross linked reactive primer @250 gm/sqm on dry prepared surface complete as per manufacturers specification. Allow the treatment to cure atleast 48 hr @30°C before laying Sun Reflective Index ( SRI Coating) for Roof Wateproofing.

Supply only integral water proofing compound

M&L for chipping of spalled and loose concrete and cleaning rust from reinforced by sand blasting scrubing down concrete surfaces with wire brushes cleaning with water allow to dry and applying a layer of Zn rich epoxy primer as an antirust on all exposed reinforcement followed by a layer of bounding coat of approved epoxy adhesive on complete exposed surfaces of concrete to be gunited all as specified and applying two layers of guniting over steel welded mesh 2 mm dia of wire and apprature 75mm,total thickness of guniting n.exc 40mm(avg thickness) in cement mortar 1.2 using OPC 53 Graded cement mixed with polycreate mixture@2% by weight of cement or as per manufacture instrs and finally applying cement plaster over guniting surface of reqd thickness to give even uniform and smooth finishes confirming to proper geometrics in cement mortar 1:3 to match the existing surfaces as in sides ,soffits of the slabs,chajja,fins,fascia,parapet,lintels,column,and beam etc complete incl necessary scaffolding,shuttering,chasing to bk work or RCC memebers at G+4 storey building incl removal of all small trees/shrubs etc.complete as per directed by Engr-in-Charge.

S & F for sheet glass(5.5mm), ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane & fixed with beadings complete as per directed by Engr-in-Charge.

S & F for sheet glass(4mm), ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane & fixed with beadings complete as per directed by Engr-in-Charge.

M&L for complete removal of existing treatment by washing/scraping/sanding and preparation of surface by filling the hole/patch/crack with putty and applying applying two coat of cement base paint by smart periodical methodology on wall in all respect as specified and directed by Engr-in-charge.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials outside MOD land not less than 5 KM (As approved by local Municipal Authorities) by mechanical means including loading, transporting and unloading the same as per NGT & NDMC norms.

Note 1:- (a) All work shall be done mechanically through authorised applicator only. (b) Authorised applicator of paint manufactures shall have valid authorisation letter from the manufacturer (minimun regional HQs) issued not earlier than 30 days from bid submission start date. (c) The contractor shall provide application,testing and certification of finishes by paint manufacturing firms. (d) Cost of above mentioned shall also included in quoted rates. (e) Rate of scaffolding upto G+4 included in the above items (f) cleaning of doors & window glasses shall be done immediately after above item is executed ,rates included in the above items. Note 2:- Site shall be handed over to as per avaibility and requirement/piecemeal, contractor shall have to no claim in this account,payment shall be made as per actual measurement of work done by the contractor

Shivam Firetech Engineers (BID ID -3169498)

M/S Parshant Associates (BID ID -3182192)

M/S SHRINARAYAN MEENA (BID ID -3182233)

A R construction (BID ID -3174666)

MAA SANTOSHI ENTERPRISES (BID ID -3174200)