Repair, Painting & Electrification Work in Eklavya Centre cum GH +2 High School Mowbazidpur (North), Block -Vidyapati Nagar,Dist-Samastipur

Dismantling tiling doors windows and clerestory windows (steel or wood) shutters of area 3 sqm and below including chowkhats, architrage, holdfasts etc. complete and stacking within 50 metres lead:

Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.

Repairs to plaster of thickness 12 mm to 20 mm with cement mortar 1:4 (1cement: 4 coarse sand) in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.

Removing white or colour wash by scraping and sand paper in and preparing the surface smooth including necessary repair scratches etc. complete

20mm Cement plaster in course sand on roof in C.M 1:4(1 cement: 4 coarse sand) all complete.

Providing and laying in position cement concrete of specified grade 1:2:4(1 Cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) exluding the cost of centring and shuttering-all work upto plinth level.using 12.5/10 mm nominal size graded/single size stone aggregate instead of 20 mm nominal size graded stone aggregate in cement concrete/reinforced cement concrete 1:2:4(1 cement:2 coarse sand:4 graded stone aggregate 20 mm nominal size)

Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3mm MS gusset plates at the junction and corners.all necessary fittings complete including applying a priming coat of approved steel primer / Wood Window palla

Providing and fixing M.S. grills Fixed to steel windows by welding of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.

Providing and fixing Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coatingof grade AC 15) aluminium work for doors,windows, ventilators and partitions with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions,i.e. at top, bottom and sidesd with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / aneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.

Providing Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating for grade AC 15) For shutters of doors, windows and ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)

Providing and fixing glazing with float glass panes of 5.50 mm thickness in aluminium door, window ,ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the direction of Engineer-in-charge .(cost of aluminium snap beading shall paid in basic item):

Providing and fixing Anodised (AC 15) aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. complete

Providing and fixing Anodised (AC 15) aluminium round shape handle of outer dia 100mm with SS screws etc. complete as per direction of Engineer-in-charge

Kota stone slab flooring over 20 mm (average ) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete . Base with 1:1:1 (1lime : 1 surkhi: 1 coarse sand ) / 1:4 (1 cement: 4 coarse sand )

Cement plaster in coarse sand 12mm cement plaster of mix: 1:4 (1 cement :4 coarse sand)

Providing and fixing first quality ceramic wall tiles conforming to IS: 15622 {thickness to be specified by the manufacturer} of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12mm thick bed of Cement Mortar 1:3(1 cement : 3 Coarse sand) and joining with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigments of matching shade

Providing and laying ceramic glazed floor tiles 300 x 300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS:15622 of approved make in all colours, shades, except white ,Ivory ,Grey,Fume red Brown laid on 20mm thick bed of cement Mortar 1:4 (1 cement:4 coarse sand ) including pointing the joints woth white cement matching pigments etc complete

Distempering in interior walls with dry distemper of approved brand and manufacture (two or more coats ) and of required shade on new work , over one coat of distemper primer of approved brand and manufacture on wall surface:and including to give an even shade.

Providing two or more coats (snowcem) in exteior wall with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade

Providing two enamel paint on steel over a coat of with ready mixed paint of approved brand and manufacture in all shades to give an even shade …

Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m All kinds of soil.

Group B

Wiring for light/ power plug with 2x4 sq.mm FR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required.

2 x 2.5 sq.mm + 1 x 2.5 sq. mm earth wire

2 x 4 sq.mm + 1 x 4 sq.mm earth wire.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular socket oulet and 15/16 amps modular switch, connecvtion etc. as required

5/6 amps switch.

3 pin, 5/6 amps socket outlet.

Supplying and fixing following size/ modules, GI box along with modular base and cover plate for modular switches in recess etc as required.

12 Module (200mmX150mm)

suppling and fixing fixing 3/2 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.

Supplying and fixing batten / angle holder including connection etc as required.

40A to 63A, Single pole and neutral

6/32 Single pole

2 + 4 way, single door,

Supply and installation of regular/standard model A.C. ceiling fan of 1200 mm sweep with service value (CM/MM) minimum 4.00, Air delivery minimum 270 cum/min including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated copper conductor etc as required.

Supplying and fixing following types lamp in existing electrical fitting/ fixture etc as required. 12 watt LED lamp

Coarse Sand

Stone Chips

Time of Completion- 1 Months

S.O.R Code

Dismantling tiling doors windows and clerestory windows (steel or wood) shutters of area 3 sqm and below including chowkhats, architrage, holdfasts etc. complete and stacking within 50 metres lead:

Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.

Repairs to plaster of thickness 12 mm to 20 mm with cement mortar 1:4 (1cement: 4 coarse sand) in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.

Removing white or colour wash by scraping and sand paper in and preparing the surface smooth including necessary repair scratches etc. complete

20mm Cement plaster in course sand on roof in C.M 1:4(1 cement: 4 coarse sand) all complete.

Providing and laying in position cement concrete of specified grade 1:2:4(1 Cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) exluding the cost of centring and shuttering-all work upto plinth level.using 12.5/10 mm nominal size graded/single size stone aggregate instead of 20 mm nominal size graded stone aggregate in cement concrete/reinforced cement concrete 1:2:4(1 cement:2 coarse sand:4 graded stone aggregate 20 mm nominal size)

Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3mm MS gusset plates at the junction and corners.all necessary fittings complete including applying a priming coat of approved steel primer / Wood Window palla

Providing and fixing M.S. grills Fixed to steel windows by welding of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.

Providing and fixing Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coatingof grade AC 15) aluminium work for doors,windows, ventilators and partitions with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions,i.e. at top, bottom and sidesd with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / aneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.

Providing Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating for grade AC 15) For shutters of doors, windows and ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)

Providing and fixing glazing with float glass panes of 5.50 mm thickness in aluminium door, window ,ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the direction of Engineer-in-charge .(cost of aluminium snap beading shall paid in basic item):

Providing and fixing Anodised (AC 15) aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. complete

Providing and fixing Anodised (AC 15) aluminium round shape handle of outer dia 100mm with SS screws etc. complete as per direction of Engineer-in-charge

Kota stone slab flooring over 20 mm (average ) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete . Base with 1:1:1 (1lime : 1 surkhi: 1 coarse sand ) / 1:4 (1 cement: 4 coarse sand )

Cement plaster in coarse sand 12mm cement plaster of mix: 1:4 (1 cement :4 coarse sand)

Providing and fixing first quality ceramic wall tiles conforming to IS: 15622 {thickness to be specified by the manufacturer} of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12mm thick bed of Cement Mortar 1:3(1 cement : 3 Coarse sand) and joining with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigments of matching shade

Providing and laying ceramic glazed floor tiles 300 x 300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS:15622 of approved make in all colours, shades, except white ,Ivory ,Grey,Fume red Brown laid on 20mm thick bed of cement Mortar 1:4 (1 cement:4 coarse sand ) including pointing the joints woth white cement matching pigments etc complete

Distempering in interior walls with dry distemper of approved brand and manufacture (two or more coats ) and of required shade on new work , over one coat of distemper primer of approved brand and manufacture on wall surface:and including to give an even shade.

Providing two or more coats (snowcem) in exteior wall with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade

Providing two enamel paint on steel over a coat of with ready mixed paint of approved brand and manufacture in all shades to give an even shade …

Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m All kinds of soil.

Group B

Wiring for light/ power plug with 2x4 sq.mm FR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required.

2 x 2.5 sq.mm + 1 x 2.5 sq. mm earth wire

2 x 4 sq.mm + 1 x 4 sq.mm earth wire.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular socket oulet and 15/16 amps modular switch, connecvtion etc. as required

5/6 amps switch.

3 pin, 5/6 amps socket outlet.

Supplying and fixing following size/ modules, GI box along with modular base and cover plate for modular switches in recess etc as required.

12 Module (200mmX150mm)

suppling and fixing fixing 3/2 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.

Supplying and fixing batten / angle holder including connection etc as required.

40A to 63A, Single pole and neutral

6/32 Single pole

2 + 4 way, single door,

Supply and installation of regular/standard model A.C. ceiling fan of 1200 mm sweep with service value (CM/MM) minimum 4.00, Air delivery minimum 270 cum/min including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated copper conductor etc as required.

Supplying and fixing following types lamp in existing electrical fitting/ fixture etc as required. 12 watt LED lamp

Coarse Sand

Stone Chips