Renovation of Staff Quartes Construction of RCC Precast Panel Boundary Wall of Bhodi Irrigation Colony.

Amount

Dismantling reinforced cement concrete 1;2:4 Including Slacking of dismantled materials as directed by Engineer-in-charge within a distance of 6OM

Dismantling stone work in lime or cement mortar including stacking of dismantled materials as directed by Engineer-in-charge within a distance of 6OM

Dismantling existing plaster including disposal of refuse as directed by Engineer-in-charge within a distance of 6OM

Dismantling door and window indudrng chaukhat with holdfast including stacking of materials as directed by Engineer-in-charge within a distance of 60 M.

Dismantling cement concrete or brick or granolithic fIoor including base concrete including stacking of dismantled materials witllin a distance of 60 M. as directed by the Engineer-in-charge.

Dry earth work in excavation of foundation including back filling of excavation earth

Excavating granite, quartzite or lime stone by pick axe not requiring blasting including lift up to 1.5 m and lead up to 30 m

Laying P.C.C. 1:4:8 in for Base below the Foundation

P.C.C 1:3:6 in Foundation and Grouting/fixing of Column including with all material, Labour T&P etc.

C.C 1:2:4 in Foundation for Grouting of precast columns including all materials, Labour T&P etc. Required for proper completion of work.

Coursed rubble stone masonry in Cememt mortar (1:3).

Centering & Shuttering for R.C.C work in slab of building work. ( ht.>3.0 mtr.)

Centering & Shuttering for R.C.C work in slab of building work. ( ht.upto 3.0 mtr.)

Shuttering for pre-cast RCC work.

Cutting. bending. handing and placing in position of reinforcement including cost of binding wire & including cost of reinforcement steel.

R.C.C. work 1:1.5:3 excluding reinforcement, Centering, Shuttering & staging.

M-20 Concrete for Pre-Cast Boundary wall (Compound wall) with plank (2100X300X75mm) , and Column (2440X230X230 mm)

Quantity for Installation charges including Transportation, labour, T&P cost etc.

Supply and fabrication and fixing of Mild steel/ Iron work in grill, gates, railing, door,window frames including cuting drilling welding rivetting and fixing hinges where nacessary with fixing in position including cost of all materials, labour, T&P etc. required for proper completion of work.

S/F pressed steel Chaukhat made of M.S. Sheet 18 gauge (1.25 mm.) including iron hinges of 100 X 3 MM. I.S.I. Mark drilling holes of L-drop, tower bolt and 230 x 40 X 6 mm. flat iron hold fast including supply of all materials, labor, T&P ,carriage up to site with one coat of red oxide primer.

Fabrication and fixing of mild steel / iron work in grill, including cutting. drilling, welding rewetting and fixing hings where necessary with fixing of position including cost of all material, labour, T&P etc. required for proper completion of work with one coat of red oxide primer.

Cement plastering 12mm thick (1:3) on stone masonry . Rate are for 3m. height, lead up to 60M.

2.5 cm (1") thick 1:2:4 plain cement concrete floor with cement, approved coarse sand and 2 cm (1") graded approved stone, grit laid in panels finished with 3 mm (1/8") floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified over and including 8 cm (3") thick base concrete consisting of cement, fine sand of 1.25 fineness modulus and brick ballast 4 cm (14")gauge in the proportion of 1:4:8 and removing any overlapping mortar at the joints of the panels if any and giving them a uniform finish, including supply of all materials, labour and Tools & Plants etc. required for proper completion of the work. Excluding GST .

Flooring for Apron around the building including cost of glass strip.Material and Labour T&P etc.

P/laying 300x300x8 mm Kajaria/ Somany tiles flooring over 20 mm. (arv.) thick base of cement mortar 1:4 (1 cement :4coarse sand) raid and jointed white colour cement (with pigment) slurry including cost of all material, labour, T&P rubbing and polishing complete in all respect

P/Laying 300x450x6 mm, china white glazed or colour tiles in wall laid With 1:3 cement & coarse sand mortar finished with white cement slurry, jointing & polishing complete, including supply of all material, labour, T&P etc. required for proper completion of work.

Supply and Fixing of 4.5 cm thick seasoned wood fully panelled door and window Shuliters including supply and lixing of wooden cleats and stops and including fixing & adjustment or hinges, bolts, lacks handles springs and/or other fittings but excluding painting with two coats of Black. Japan on all iron fittings if necessary screws to be supplied departmentally.

Finishing wall with white cloured two coat approved make of or Birla / J.K. wall putty including cost of all material, labour, T&P required for proper completion of work

Distempering approved brand (two coats) over one priming coat of whiting on new surface after thoroughly brushing the surface free from dropping and other foreign matter including preparing the surface even and sand papered smooth.

Finishing walls in two coat of water proofing cement paint of premium quality such as super snowcem, Durocem, Supercem of required shade on new wall surface over one coat of white cement primer to give an even shade including curing and cost of all materials.

Painting two coat of wooden primer and two coat paint on new wooden surface including thoroughly cleaning of dirt & other foreign matter and sand papering & making smooth surface.

Painting two coat of Synthetic enamel paint on new surface (excluding cost of primer) superior quality such as luxol, higloss, apcolite, superiarc. dulux, including cost of all material, labour T&P etc. required for proper completion of work.

Wiring point for light with 1.5 Sq.mm. PVC insulated multisrand copper conductor cable or earth wire drawn inside the conduit. pipe concealed in the wall complete with 8 SWG.I. earth continuity wire and piano type switch etc. complete in all-respect

Wiring point for plug with 1.50 sq mm, PVC insulated multisrand copper conductor cable or earth wire drawn inside the conduit. Conduit concealed in the wall

Wiring point for fan/fresh air fan (light duty exhaust fan) with 1.5 sq. mm. FR PVC insulated multistrand copper conductor cable or earth wire drawn inside the PVC conduit pipe earth continuity wire and piano type switch etc. complete in all respects.

Wire point for HPMV lamp with 2.5 mm 2 PVC/C/V 1R insulated single core cable in heavy gauge rigid steel conduit conduit. concealed in the wall ccomplete with 8 SWG G.I. earth continuity wire with 15 A piano type switch etc. complete in all respect.

S/F Isolator (63A , 220V) Make type Havells or any approved brand including with electrician and labor charges

S/F M.C.B (16A, 220V) Make type Havells or any approved brand including with electrician and labor charges

S/Fixing 100 mm size 'P'or 'S' trap for water Closet squatting pan including jointing the trap with the pan and pipe in cement mortar 1:1 (1 cement: 1 one sand)

P/F Indian (Orissa pan) type white glazed earthen ware 1st quality lSI marked W/C pan size 580 Indian make of approved quality including cost of all materials,

P/ Fixing 10 Its. Low revel P.V.C cistern of standard approved make complete with all accessories and fittings.

P/F mirror of size 900mmx45mm of approved make with teak wood frame and 6 mm thick hard board baking including cost of all material, labor T&P etc,

P/Fixing wash basin 550x400 with Pedestal and holes for pillar Cock with C.I. M.S. brackets painted white including cutting hole & making good the same.

P/Fixing stainless steel kitchen sink 510x310x200 with J. bracket excluding cost of other fittings.

P/F PVC over head tank 1.0KL Tank capacity in any approved brand such as sintex including all cost of material and manpower.

P/Fixing concealed CPVC 15 mm dia pipe complete with fitting & clamps, including cutting and making grooves the walls etc. complete (internal works) including cost of material.

P/Fixing concealed CPVC 25 mm dia pipe complete with fitting & clamps, including cutting and making grooves the walls etc. complete (internal works) including cost of material.

15mm dia stainless steel bib cock /No.

P/F 15mm dia stainless steel pillar cock ISI marked including cost of all material.

P/F 15mm dia PVC union ISI marked including cost of all material.

P/F 25mm dia PVC union ISI marked including cost of all material.

P/F 15mm dia albow ISI marked including cost of all material.

P/F 25mm dia albow ISI marked including cost of all material.

P/F 15mm dia socket ISI marked including cost of all material.

P/F 25 mm dia socket ISI marked including cost of all material.

P/F dia Reducing T fitting including cost of all material.

P/F 25 mm dia T fitting ISI marked including cost of all material.

P/F 15 mm dia angle cock ISI marked including cost of all material.

P/F nahani trap with jali including cost of all material.

P/F 25mm float valve in over head tank including cost of all material.

P/F water Shower with isi mark including cost of all material.

Transportation of Rig Machine And its T & P with Loading Unloading and manual sifting of clamp and eqipapages at site and return back after completion of work.

Boring and drilling with RIG machine, boring 15 cm dia up to 40 m depth in average type strata containing sand, medium dry clay mixed with kankar, or charri or both and strata having stones also. (i) 0 to 10 m

(ii) 11 to 20 m

(iii) 21 to 30 m

(iv) 31 to 40 m

(vi) 51 to 55 m

Supply and lowring of 100mm dia PVC casing pipe with isi mark incluiding all cost of material and Labour etc.

Supply and lowering of 100mm dia PVC casing slotted pipe with isi mark incluiding all cost of material and Labour etc.

Supply stone grid (4.75 mm to 10mm) including filling surrounding in bore well.

Dovelopment of bore by air compressore.

Supply and installation 32 mm dia PVC column pipe 10 Kg/cm2

Supply and installation of 1 HP water filled submersible Pump set Approved make complete with starter panel etc.

S/F of 32 mm dia 1 pair Iron Clamp

S/F of Submersible Cable 2.00 sq mm Finolex make

S/F of Elbow 32 mm dia

S/F of Nipple

S/F of Bore end Cap 100 mm

S/F of Bore Cap 100 mm

S/F of Gate valve

S/F of Nilon mesh and dori

S/F of Supporting wire

Earth work in filling in embankment including cost of all materials, labour, T&P, lead and lift required for proper completion of work.

WBM Grading - II Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheeled roller 80-100 Kn in stages to proper grade and camber, applying and brooming stone screening to fill up the interstices of coarse aggregate, watering and compacting to the required density Grading II as per MORD Specification Clause 405

WBM Grading - III Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheeled roller 80-100 Kn in stages to proper grade and camber, applying and brooming stone screening to fill up the interstices of coarse aggregate, watering and compacting to the required density Grading III as per MORD Specification Clause 405

Prime Coat (Slow Setting)- Providing and applying prime coat with bitumen emulsion of specified grade on the prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70Kg/sqm as per MORD specification.

Tack Coat- Providing and applying tack coat with bitumen (VG-10) using emulsion distributor at the rate of 0.30 kg per sqm on the prepared bituminous/granular base surface cleaned with mechanical broom as per MORD specification.

20mm thick Open-Graded Premix Carpet using Bituminous - Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of speicified size aggregates either using penetration grade bitumen or cut-back or emulsion to serve as wearing course on a previously prepared base, including mixing in a hot mix plant, transpotation to the site, laying with paver finisher to the required grade, level and alignment and rolling with a smooth wheeled roller 80-100 Kn capacity, finished to required level and grades as per MORD specification.

Seal Coat - Providing, and laying seal coat sealing the voids in a bituminous surface laid to the specified levels grade and cross fall using Type C seal coat (As per MORD Specified Clause 510)

ARJUN SINGH CONTRATOR