Misc Meintenance in Toilet at G.F Shakti Bhawan Extension Lucknow

Amount

Cement concrete with 2cm gauge approved hard stone ballast, coarse sand (F.M. 1.8 to 2.5) and cement in proportion of 4:2:1 including supply of all materials, labour,side shuttering if required and T& P etc. required for proper completion of work.

Concreting of 40 mm thick RCC trench covers in mild steel frame work with RCC 1:1.5:3 in Cement,Chopan coarse sand (F.M. 1.8 to 2.5) and 2cm gauge graded hard stone ballast with 3mm thick floating coat of neat cement finish on top of cover complete with all labour, materials and placing the same in proper position at required location of cable trench within the substation area.

First class brick work in 1:6 cement and coarse sand (F.M.1.8 to 2.5) mortar in foundation and plinth including supply of all materials, labour & T&P etc. required for proper completion of work.

First class brick work in 1:6 cement and coarse sand (F.M.1.8 to 2.5) mortar in S. S including supply of all materials, labour & T&P etc. required for proper completion of work.

First class brick work in 1:4 cement and coarse sand (F.M.1.8 to 2.5)mortar in super structure in steps, parapet and facia including nacessary cutting moulding of bricks and including supply of all materials labour & T & P required for proper completion of the work including placing & fixing of reinforcement in position with 24 B.W.G. binding wire with centering shuttering complete but excluding cost of reinforcement and its bending which shall be measured separately.

Supply and fixing Anodized Aluminium Door fittings like 2 no 150 mm handles,2 no 250 mm tower bolt, 1 no stopper and 1 no 12 mm belan including all materials, labour & T&P etc. required for proper completion of work.

12 mm thick plaster with cement mortar consisting of one part of cement & three part of coarse sand (1:3), minimum thickness not to be less then 10 mm including supply of all material labour and T&P etc for proper completion of work.

12 mm thick plaster with cement mortar consisting of one part of cement & six part of coarse sand(1:6),minimum thickness not to be less then 10 mm including supply of all material, labour and T&P etc for proper completion of work.

2.5 cm thick 1:2:4 plain cement concrete floor with cement, approved coarse sand & 2cm graded approved stone ballast laid in panels finished with 3mm floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified and including 7.5 cm thick base concrete consisting of cement, coarse sand and 4cm gauge I class brick ballast in the proportion of 1:6:12 and removing any overlapping mortar at the joints of the panels if any and giving them a uniform finish including supply of all materials, labour and T&P etc, required for proper completion of the work.

Same as in item no 09 but for without base CC

Supply and Laying 8 mm thick glazed floor tiles of Somany, Johnson or equivalent make, of size 300x300 mm, laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete, including supply of all materials, labour and T&P etc. required for proper completion of the work.

Supply and Laying 6 mm thick glazed tiles of size 300x450 mm in skirting / dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete,including supply of all materials, labour and T&P etc. completion required for proper completion of the work.

Providing and laying floor of 8 mm thick vitrified tiles in flooring or skirting of approved brand (Bell, Johnson or equi. make) size of 600x600 mm of approved shade, colour and pattern , laid over base cement mortar 1:4 mix including finishing the joints with white cement mixed with pigment to match the shade of tile including cost of all material, labour and T&P required for proper completion of the work.

One priming coat and one coat oil bound distemper on new work including supply of all materials,labour and T&P etc. required for proper completion of the work.

As in item 14 but for every coat after the first coat.

As in item 14 but for every coat on previously old oil bound distemper surface.

Applying BIRLA PUTTY or equivalent putty on previousaly bila putty smoothen surface over one cost of water base cement primer of ICI or equivalent brand for smoothining and leveling of the surface as per requirement and direction of E/I including cost of all material , labour and T&P required for proper completion of work.

Dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed by the Engineer-in-charge within a distance of 60 metres.

Dismantling cement concrete or brick or granolithic/Tile floors including base concrete and including stacking of dismantled materials as directed by the Engineer In-charge within a distance of 60 metres.

Repair to 2.5 cm (1") cement concrete floor in patches including up to 10 cm.(4") depth renewing 8 cm.(3") base concrete consisting of one part cement, 4 parts aproved coarse sand and 8 parts of 4 cm.(1.5") gauge brick ballast as in C.C.floor consisting of one part cement 2 parts approved coarse sand and 4 parts approved stone grit including supply of all materials.labour and T&P etc. required for proper completion of the work.

Disposal of rubbish / debris out side the UPPCL area as per direction of Er/in- charge including cartage, labour and materials, T&P etc. required for proper completion of the work. (No. deduction for voids shall be made) .

Providing and fixing 15 mm dia B-class Jindal,JTC, ISI marked G.I. pipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete.

Same as above item No-22 but for 20 mm dia.

Providing and fixing full way 20mm dia G.M. gate valve with wheel, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work.

Providing and fixing CP BRASS BIB COCK15 mm dia. HEAVY QUALITY ( 400gm) ( L & K and equi.) fittings, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work.

Providing and fixing of 110 mm dia PVC pipe 6 Kg/ Sq.cm for with special such as Tee, bend, socket, elbow etc including supply of all labour,material,T & P etc complete required for proper completion of work.

Providing and fixing first quality but of Anglo Indian type W.C.Pan Hindustan, Cera make. size 580 mm.with out "P" trap including supply of all materials,labour and T&P etc.complete.

Providing and fixing first quality white glazed "Orissa" pattern W.C.Pan Hindustan, Cera make. size 580 mm.(Hindustan,Cera Make) with out "P" trap including supply of all materials,labour and T&P etc.complete.

Supply and fixing PVC Nahani Trap India make of heavy approved quality complete with CI grating, including supply of all materials,labour and T&P etc. required for proper completion of the work.

Providing and fixing 100 mm dia PVC "P" or "S" trap including cement concrete and all materials, labour cartage T&P etc.required for proper completion of the work.(For W.C.)

Providing and laying 110mm SWR, PVC ( Finolex or equivalent ) pipe including cost of excavation, C.C etc including its jointing and connection, all materials, labour and T&P etc. required for proper completion of the work.

Providing and fixing 110 mm SWR, PVC ( Finolex or equivalent ) Bends including cost of all materials, labour and T&P etc required for proper completion of the work.

Providing and fixing 110 mm SWR, PVC ( Finolex or equivalent ) Trap including cost of all materials, labour and T&P etc required for proper completion of the work.

Providing and fixing 110 mm SWR, PVC ( Finolex or equivalent ) Socket including cost of all materials, labour and T&P etc required for proper completion of the work.

Providing and fixing 110 mm SWR, PVC ( Finolex or equivalent ) plain Tee including cost of all materials, labour and T&P etc required for proper completion of the work.

Providing and fixing 110 mm SWR, PVC ( Finolex or equivalent ) Door Tee including cost of all materials, labour and T&P etc required for proper completion of the work.

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

Providing and laying two coats of Pidifin 2K (Pidilite make) as per manufacturer’s Including supply of all materials, labour and T & P etc required for proper completion of work.

Supply and fixing of Jet Spray Model No- AHS-1557 of Jaquar make as approved by E/I. The work includes cost of all labour, material T&P for proper completion of work.

Supply and fixing of of waste Coupling of make Model No-ALD-705L130 of Jaquar make or equivalent. make as approved by E/I. The work includes cost of all labour, material T&P for proper completion of work

Injection grouting in cracks as required includes cost of all labour, material T&P for proper completion of work

Providing and fixing of Supreme make or equivalent make 160mm dia PVC pipe of 6 Kg pressure for ground floor to 07th Floor vertically in duct/wall including cost of scafolding, all labor material, T&P etc required for proper completion of the work.

Supply and fixing of Health Faucet Model No-ALD-CHR-565 With 1.00 Mtr Long Flexible Tube in chrome Finish and Wall Hook of Jaquar make or equivalent. make as approved by E/I. The work includes cost of all labour, material T&P for proper completion of work

Supply and fixing of Concelled cistern with wall mounting frame & instalation kit Model No CIB-31801011XW-2400WS with control plate lemon design Model No-CIS-CHR-31204190 of Jaquar make as approved by E/I. The work includes cost of all labour, material T&P for proper completion of work .

Supply and fixing of Wall Hung Model No- CNS -951S Size-536x370x370 with Normal closing seat cover with rack bolt (SS) model No-ZPS -SNS-RB-01 of Jaquar make or equivalent. make as approved by E/I. The work includes cost of all labour, material T&P for proper completion of work

Supply and fixing of Two way Bib cock with wall flange Model Noopp-15041PM of Jaquar make or equivalent. make as approved by E/I. The work includes cost of all labour, material T&P for proper completion of work

Supply and fixing of Rack bolt For WC Model No-ZPS-SNS-RB01 of Jaquar make as approved by E/I. The work includes cost of all labour, material T&P for proper completion of work .

Supply and fixing of Wax Seal Model No-ZPS-WHT-1401 of Jaquar make as approved by E/I. The work includes cost of all labour, material T&P for proper completion of work .

M/S R K CONSTRUCTIONS AND SUPPLIERS

AAKRITI ENTERPRISES