RESTORATION OF HARITAGE DISTRICT LOCAL BOARD BUILDING AT ZILHA PARISHAD SATARA (PHASE II Furniture Work)

Providing and fixing Manalore tiled roofing with class "AA" tiles including securing the last course of tiles near the eaves with steel flat 40 milimetre X 3 milimetre and 1.22 milimetre wire, fixing country teak wood sloping battens of 25 milimetre X 12 milimetre teak wood horizontal battens of 50 milimetre X 25 milimetre over the slopping battens, all iron work and coal tarring the battens, excetra complete. (excluding ridge and hip tiles) (For Ground Floor) Item / Page No : 2 / 233 Specification No : Bd.R.2 Spec. Page No : 450

Providing and fixing plain zinc sheeting of 0.80 milimetre thick (22 B.W.G) over the ridge hip or valley to galvanized iron sheet roofing including all fastening and bolt, galvanised iron screw and bolts and lead and bitumen washers, excetra complete. (Weight 6.8 killogram per square metre) (For Ground Floor) Item / Page No : 5 / 233 Specification No : Bd.R.5 Spec. Page No : 452-453

Providing and fixing Indian teak wood plank ceilling 20 milimetre thick plain underside tounged and groved including iron screws, scaffolding, if necessary, including one primer coat on under side and one coat of coal tar on upper side, excetra complete. (For Ground Floor) Item / Page No : 5 / 230 Specification No : Bd.Q.3 Spec. Page No : 421

Providing and applying malamine polish of required finish to the wood work by spray machine including knotting and preparing the even surface by scrapping, applying french polishing, scaffolding, if required, excetra complete. (For Ground Floor) Item / Page No : 9 / 222 Additional Specifications : The work shall be done as per instructions of Engineer in charge.

Providing and fixing country cut teak wood windows with double leaf 25 milimetre thick planked shutters without ventilators as per detailed drawings including stainless steel fixuters and fastenings and finishing the wood work with oil painting three coats, excetra complete. (For Ground Floor) Item / Page No : 17 / 247 Specification No : Bd.T.43 Spec. Page No : 503

Providing and laying Cast in situ / Ready Mix cement concrete M-15 of trap / granite / quartzite / gneiss metal for steps including steel centering, plywood / steel formwork, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing, excetra complete. The cement mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin, excetra (Wooden centering will not be allowed.) with fully automatic micro processor based Programmable Logic Controller without Supervisory Control and Data Aquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra complete. With With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) (For Ground Floor) (using ARTIFICIAL SAND). Item / Page No : 4 / 175 Specification No : Bd.E.2, B-7 Spec. Page No : 288, 38-40 Additional Specifications : 1. With additional specifications for controlled concrete. 2. If artificial / VSI crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in Circular by Chief Engineer, Public Works Region, Pune bearing No CEP/D-2/Buildings-2/5940/2017 dated 17/10/2017 and Annexure-I attached to it and also Circular by Chief Engineer, Public Works Region, Nagpur bearing No 36 dated 15/01/2019 and Annexure-I attached to it will be appicable.

Providing and laying vitrified stone effect finish having size 590 milimetre to 605 milimetre X 590 milimetre to 605 milimetre of 8 milimetre to 10 milimetre thickness on existing flooring with bonding chemical and confirming to Indian Standard 15622-2006 (Group BIa) of approved make, shade and pattern for flooring in required position laid on a bed of bonding chemical, filling joints, curing and cleaning, excetra complete. (For Ground Floor) Item / Page No : 65 / 220 Specification No : Bd.M.12 Spec. Page No : 385

Providing and constructing brick masonry inspection chamber 60 centimetre X 45 centimetre X 90 centimetre including 1:4:8 cement concrete foundation, 1:2:4 cement concrete channels, half round glazed stoneware pipes, brick masonary, plastering from inside and farme fixed in cement concrete Cover medium duty 140 kilogram with frame excetra complete. (using ARTIFICIAL SAND). Item / Page No : 12 / 275 Specification No : Bd.V.43 Spec. Page No : 574 Additional Specifications : If artificial / VSI crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in Circular by Chief Engineer, Public Works Region, Pune bearing No CEP/D-2/Buildings-2/5940/2017 dated 17/10/2017 and Annexure-I attached to it and also Circular by Chief Engineer, Public Works Region, Nagpur bearing No 36 dated 15/01/2019 and Annexure-I attached to it will be appicable.

Providing and fixing chromium plated bib cock with wall flange of approved make including necessary sockets / union nut, excetra complete. (For Ground Floor) Item / Page No : 83 / 283 Additional Specifications : The work shall be carried out as per instructions of Engineer in charge.

Providing and fixing european type wall hung white water closet of approved make with push valve consealed type with cover plate 32 milimetre size of approved make including soil pipe, vent pipe upto outside face of wall, 100 milimetre diameter galvanised iron plug, bend, inlet pipe all fittings, cutting and making good walls, floors, excetra complete. (For Ground Floor) Item / Page No : 86 / 283 Additional Specifications : The work shall be done as per instructions of Engineer in charge.

Providing and fixing coloured glazed earthenware full stall type urinal with polyvinyl chloride flushing cistern of 5 litres capacity with fitting inlet pipes and stop tap brackets for fixing the cistern 32 milimetre diameter polyvinyl chloride flush pipe with fittings and flushing arrangement including lead soil pipe, lead trap soil pipe connection upto the outside face of the wall. (For Ground Floor) Item / Page No : 59 / 271 Specification No : Bd.V.23 Spec. Page No : 562

Providing and fixing coloured glazed with bottle trap earthenware Wash Hand Basin of 55 centimetre X 40 centimetre size including cold water piller taps, brackets, rubber plugs and brass chain, stop tap, chromium plate bottle trap and necessary pipe connections including unplasticized polyvinyl chloride waste pipe and trap upto the outside face of the wall, making good the damaged surface, testing excetra complete. Item / Page No : 72 / 273 Specification No : Bd.V.30 Spec. Page No : 616

Providing and fixing 8 centimetre cast iron nahani trap including cast iron grating, bend and piece of cast iron pipe upto the outside face of the wall complete. (For Ground Floor) Item / Page No : 79 / 273 Specification No : Bd.V.32 Spec. Page No : 567

Providing, laying and fixing polyvinyl chloride pipe of 50 milimetre diameter with fittings such as bends, tees, reducers, clamps, excetra including necessary excavation, trench filling, excetra complete.Including removing existing pipe line if necessary and conveying and stacking thesame in PWD chowky or as directed excetra complete. Item / Page No : 26 / 276 Additional Specifications : The work shall be done as per instructions of Engineer in charge.

Providing, laying and fixing polyvinyl chloride pipe of 75 milimetre diameter with fittings such as bends, tees, reducers, clamps, excetra inclduding necessary excavation, trench filling, excetra complete.Including removing existing pipe line if necessary and conveying and stacking thesame in PWD chowky or as directed excetra complete. Item / Page No : 27 / 276 Additional Specifications : The work shall be done as per instructions of Engineer in charge.

Providing and laying in trenches 25 milimetre diameter chlorinated poly vinyl chloride pipe including necessary excavation, fittings, refilling trenches, excetra complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed excetra complete. Item / Page No : 63 / 281 Specification No : Bd.V.5 Spec. Page No : 551 Additional Specifications : The work shall be done as per instructions of Engineer in charge.

Providing and fixing on walls / celling / floor 25 milimetre diameter unplasticized polyvinyl chloride pipe with necessary fittings, remaking good the demolished portion, excetra complete.Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed excetra complete. (For Ground Floor) Item / Page No : 91 / 284 Specification No : Bd.V.5 Spec. Page No : 551 Additional Specifications : The work shall be done as per instructions of Engineer in charge.

Providing and fixing black Kadappa stone as shelves 25 milimetre thick machine polished, extending the polish upto 20 centimetre width on lower side, rounding corners, laying in position, jointing with cement mortar bedding in cement mortar 1:4 proportion, curing, excetra complete. (For Ground Floor) Item / Page No : 23 / 215 Specification No : Bd.M.29 Spec. Page No : 391

Providing second class burnt brick masonry with conventional / Indian Standard type bricks in cement mortar 1:6 in foundations and plinth of inner walls / in plinth of external walls including bailling out water manually, striking joints, on unexposed faces, racking out joints on exposed faces and watering, excetra complete. (using ARTIFICIAL SAND). Item / Page No : 1 / 197 Specification No : Bd.G.1 Spec. Page No : 313 Additional Specifications : If artificial / VSI crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in Circular by Chief Engineer, Public Works Region, Pune bearing No CEP/D-2/Buildings-2/5940/2017 dated 17/10/2017 and Annexure-I attached to it and also Circular by Chief Engineer, Public Works Region, Nagpur bearing No 36 dated 15/01/2019 and Annexure-I attached to it will be appicable.

Providing second class Burnt Brick masonry with conventional / Indian Standard type bricks in cement mortar 1:6 superstructure including striking joints, racking out joints, watering and scaffolding, excetra complete. (For Ground Floor) (using ARTIFICIAL SAND). Item / Page No : 5 / 197 Specification No : Bd.G.5 Spec. Page No : 315 Additional Specifications : If artificial / VSI crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in Circular by Chief Engineer, Public Works Region, Pune bearing No CEP/D-2/Buildings-2/5940/2017 dated 17/10/2017 and Annexure-I attached to it and also Circular by Chief Engineer, Public Works Region, Nagpur bearing No 36 dated 15/01/2019 and Annexure-I attached to it will be appicable.

Providing internal cement plaster 12 milimetre thick in single coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing, excetra complete. (For Ground Floor) (using ARTIFICIAL SAND). Item / Page No : 5 / 209 Specification No : Bd.L.2 Spec. Page No : 368 Additional Specifications : If artificial / VSI crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in Circular by Chief Engineer, Public Works Region, Pune bearing No CEP/D-2/Buildings-2/5940/2017 dated 17/10/2017 and Annexure-I attached to it and also Circular by Chief Engineer, Public Works Region, Nagpur bearing No 36 dated 15/01/2019 and Annexure-I attached to it will be appicable.

Providing sand faced plaster externally in cement mortar using approved screened sand in all positions including base coat of 15 milimetre thick in cement mortar 1:4 using waterproofing compound at one killogramme per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment of 6 to 8 milimetre thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days, scaffolding, excetra complete. (For Ground Floor) (using ARTIFICIAL SAND). Item / Page No : 11 / 209 Specification No : Bd.L.7 Spec. Page No : 369 Additional Specifications : If artificial / VSI crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in Circular by Chief Engineer, Public Works Region, Pune bearing No CEP/D-2/Buildings-2/5940/2017 dated 17/10/2017 and Annexure-I attached to it and also Circular by Chief Engineer, Public Works Region, Nagpur bearing No 36 dated 15/01/2019 and Annexure-I attached to it will be appicable.

Providing and laying matt finish ceramic tiles of having sizes 30 centimetre X 30 centimetre and confirming to Indian Standard 15622 : 2006 (Group DII-A) and 7 milimetre to 8 milimetre thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white / colour cement slurry, cleaning, curing, excetra complete. (For Ground Floor) (using ARTIFICIAL SAND). Item / Page No : 24 / 215 Specification No : Bd.M.12 Spec. Page No : 385 Additional Specifications : If artificial / VSI crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in Circular by Chief Engineer, Public Works Region, Pune bearing No CEP/D-2/Buildings-2/5940/2017 dated 17/10/2017 and Annexure-I attached to it and also Circular by Chief Engineer, Public Works Region, Nagpur bearing No 36 dated 15/01/2019 and Annexure-I attached to it will be appicable.

Providing and laying ceramic tiles of having sizes 30 centimetre X 60 centimetre and confirming to corrosponding Indian Standard for dado and skirting in required position with ready made adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white / colour cement slurry, cleanding, curing, excetra complete. (For Ground Floor) (using ARTIFICIAL SAND). Item / Page No : 27 / 215 Specification No : Bd.M.13 Spec. Page No : 386 Additional Specifications : If artificial / VSI crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in Circular by Chief Engineer, Public Works Region, Pune bearing No CEP/D-2/Buildings-2/5940/2017 dated 17/10/2017 and Annexure-I attached to it and also Circular by Chief Engineer, Public Works Region, Nagpur bearing No 36 dated 15/01/2019 and Annexure-I attached to it will be appicable.

Providing and applying two coats Apex Ultima Puranature Anti- Pollution Or equivalent approved brand, paint should decomposes organic substances and inorganic gases(NOx, VOC’s, CO, SOx, formaldehydes, excetra) in presence of natural or artificial light. It contains Graphene and nanoparticles of titanium oxide. and Absorbs CO2 (4.8 kg/15 l). plaster crack should be filled by Acrylic base Crack seal/Textured Crack filler, Paint has to applied on one coat of Apex Ultima Puranature Anti-Pollution Primer or Equivalent. Warranty Should be given by the Manufaturer The work should be done by the Manufacturer Recommended applicator and he should be able to furnish stage wise onsite technical reports from the concerned company technologist. Item / Page No : 79 / 346 Additional Specifications : Work shall be carried out as per the instructions of Engineer In-Charge.

Providing and fixing of free standing table of size 1350 milimetre X 750 milimetre X 750 milimetre Top to be made of 25 milimetre prelaminated particle board with polyvinyl chloride edge band, bent leg to be chrome finish as per drawing. Item / Page No : 29 / 357 Additional Specifications : The work shall be done as per instructions of Engineer in charge.

Providing and fixing table of size 1200 milimetre X 600 milimetre X 750 milimetre Top made from 25 milimetre prelaminated particle board. All edges are covered by 2 milimetre thick polyvinyl chloride edge bands glued by hot melt glue applied by auto edge banding machine. Legs C Shape made from cold rolled close annealed sheet with powder coat finish. Modesty panel made from 18 milimetre both side prelaminated particle boards. All edges are covered by 0.8 milimetre polyvinyl chloride edge bands glued by hot melt glue applied by auto edge banding machine. Keyboard tray (without mouse tray) metal powder coated - black colour, central processing unit Trolley metal powder coated - black colour, 3 drawer pedestal unit having overall size 392 milimetre long X 450 milimetre depth X 680 milimetre height with central lock and key. Drawers and body are complete metal with powder coat finish, facia in 18 milimetre prelaminated particle board. Item / Page No : 28 / 357 Additional Specifications : The work shall be done as per instructions of Engineer in charge.

Providing and fixing decorative teak plywood veneer linning 4 milimetre thick with backing of teak wood frame work of battens 12 milimetre X 25 milimetre at 30 centimetre center to center fixed to walls and pillars with 12 Milimeter thick plywood building without skirting and cornice as per drawings including necessary iron work and finishing the exposed wood work with french polish, excetra complete. (For Ground Floor) Item / Page No : 13 / 231 Specification No : Bd.Q.18 Spec. Page No : 431

Providing and fixing in position, mild steel fabrication work using angles, square tubes, C-channels, excetra for various partition frame as per design and instructions and complete in all aspects including all materials, labour, finishing, excetra complete. Item / Page No : 16 / 354 Additional Specifications : The work shall be done as per instructions of Engineer in charge.

Providing and fixing in position, acoustical panelling made from 12 milimetre waterproof plywood and 1.5 milimetre laminate on, 50 milimetre X 50 milimetre sal-wood frame of 600 milimetre X 600 milimetre center to center having wooden supports from wall of required length, in front of 1000 grams per square metre synthetic wool 50 milimetre thick with chicken mesh on wall side, including cost of required cut-outs, decorative mouldings / finishing items / paint and scaffolding, as per architectural and acoustical design and instructions and complete in all aspects including all materials, labour, finishing, excetra complete. Item / Page No : 4 / 352 Additional Specifications : The work shall be done as per instructions of Engineer in charge.

Providing and fixing in position, partition made from 12 milimetre thick gypsum from both sides on 50 milimetre X 50 milimetre Sal-wood frame of 600 milimetre X 600 milimetre c/c, having of 800 grams per square metre synthetic wool 50 milimetre thick in between, including cost of required cut-outs and scaffolding, as per architectural and acoustical design and instructions and complete in all aspects including all materials, labour, finishing, excetra complete. Item / Page No : 12 / 354 Additional Specifications : The work shall be done as per instructions of Engineer in charge.

Providing and fixing in position, acoustical panelling made from 12 milimetre thick Agro wood strips of 50, 75 and 100 milimetre width on 50 milimetre X 50 milimetre sal-wood frame of 600 milimetre X 600 milimetre center to center having supports from wall of required length, in front of 1000 grams per square metre synthetic wool 50 milimetre thick with approved coloured fabric on strips side and chicken mesh on wall side, including cost of required cut-outs, decorative mouldings / finishing items / paint and scaffolding, as per architectural and acoustical design and instructions and complete in all aspects including all materials, labour, finishing, excetra complete. Item / Page No : 10 / 353 Additional Specifications : The work shall be done as per instructions of Engineer in charge.

Providing and fixing conference main table of size 1800 milimetre long X 900 milimetre depth X 750 milimetre height, made up of 18 + 18 milimetre thick MDF top with polyvinyl chloride membrane finish and waterfall edge profile. Aluminium anodizied finish beeding of 4 milimetre thich is running all over the table top edge. Gable ends is aerofoiled shape with front edges in polyvinyl chloride membrane finish and rest in prelaminated MDF with batton structure. Gable ends should be hollow from inside for the provision of passing electrical and data wiring. Modesty panel to be made of 18 milimetre thick prelaminated particle board with polyvinyl chloride edge band. Access flap for wire manager 1 No. Item / Page No : 32 / 358 Additional Specifications : The work shall be done as per instructions of Engineer in charge.

Providing and arrangemnt of high back chair, synchronized mechanism with multiple locking, adjustable armrest, gaslift for seat height adjustment, standard 5-prong P/Nylon base with leatherite upholstery. Item / Page No : 40 / 359 Additional Specifications : The work shall be done as per instructions of Engineer in charge.

Standard Consistancy, Fineness, Specific Gravity, Setting Time (Initial and Final), Compressive Strength, Soundness Test for Cement 1 Test per 50.00 Metric Ton

Fineness Modulus (Sieve Analysis), Silt and Clay Content Test for Artificial Sand 1 Test per Source

Sieve Analysis Test for Metal below 40 milimetre 1 Test per 200.00 Cubic Metre

Water Absorption, Specific Gravity, Impact Value, Crushing Value Test for Metal below 40 milimetre 1 Test per Source

Compressive Strength of Cement Concrete Cube 1 Test for quantity upto 5 cubic metre, 2 Tests for quantity above 5 cubic metre and upto 15 cubic metre, 3 Tests for quantity above 15 cubic metre and upto 30 cubic metre, 4 Tests for quantity above 30 cubic metre and upto 50 cubic metre. For quantity 50 cubic metre and above - 4 Tests + 1 Test for each additional 50 cubic metre

Water Absorption, Compressive Strength, Efflorescence Test for Burnt Bricks 1 Test per 50000.00 Number

Compressive Strength of Cement Mortar 1 Test per Day

Water Absorption, Modulus of Rupture Test for Ceramic / Vitrified Tiles 1 Test per 2000.00 Number

Providing and Supplying 2 Seater sofa having size of W 1650 x D 750 x 710 with Arms made up in teakwood frame & battan. The seat foam is having density 45 kg/m3 and 150 mm thickness. & back rest of 100 mm thickness. with D-decor fabric ofRs.1,200/- per meter all sides of sofa shall cover with designer cloth, legs of sofa shall be of 8 No. in teak wood along with melamine polish as per design and drawing, as approved by the project architect and work must be done as directed by Engineer Incharge etc complete.

Providing and Supplying 3 Seater sofa having size of W 2200 x D 750 x 710 with arms made up in teakwood frame & battan. The seat foam is having density 45 kg/m3 and 150 mm thickness. & back rest of 100 mm thickness. with D-decor fabric of Rs.1,200/- per meter all sides of sofa shall cover with designer cloth, legs of sofa shall be of 8 No. in teak wood along with melamine polish as per design and drawing, as approved by the project architect and work must be done as directed by EngineerIncharge etc complete.

Providing and fixing L type Sofa as per dimension made up of 18/12 mm thick P plywood and wooden batten, 18 mm metal frame work PU seat foam of having density 45 kg/m3 and 100 mm thickness. PU backrest foam having density 32 kg/m3 (Fabric - Brand Name - majestic Enterprises Goregaon (W) imported fabric and fox leather import by Europe country artificial leather (Rexin) Rate - 810 per mtr etceteraComplete. All Samples must be approved by the project architect and work must be done as directed by Engineer Incharge etc complete.

Providing and Supplying arm chair having size of 750L X 750 W X 900 H made up of teak wood size of 60 mm x 60 mm along with 18 mm thick plywood for seat & back purpose, along with foam & D-décor designer cloth of Rs 1,500/- per meter for all sides for cover the chair expose wood part shall be melamine polish. the chair shall have teak wood 4 wooden legs with melamine polish. All Samples must be approved by the project archietect and work must be done as directed by Engineer Incharge etc complete.

Providing and Supplying Study Table having size of 600L X 600 W X 750 H made up in wooden frame with 4 Legs all sides of chair shall be covered with foam & D-décor designer cloth of Rs. 1500/- per meter . All Samples must be approved by the project archietect and work must be done as directed by Engineer Incharge etc complete.

Centre table - centre table 900mm x 750 mm x 450mm for m.s. ante chamber Providing and Fixing Of Tea Table 900mmx750mmx450mm with 12 mm thick colour eitched Tempered Glass with Bevelled Drawing Made out of 18 mm thick waterproofing Ply. The Outer Laces To Be Finished With High Quality 4mm Thick Veneer

Centre table - centre table 1200mm x 1000 mm x 450mm for m.s. ante chamber Providing and Fixing Of Tea Table 1200mmx1000mmx450mm with 12 mm thick colour eitched Tempered Glass with Bevelled Drawing Made out of 18 mm thick waterproofing Ply. The Outer Laces To Be Finished With High Quality 4mm Thick Veneer