Improvement of Boundary Lighting with LED Street Lights at FSD Vyasnagar under DO Varanasi

Amount

Supply and Fixing of 9 mtrs single section Hot dip Galvanized(as per BS EN ISO 1461) octagonal Street light pole (specification not less than, top dia 70 mm, Bottom dia 155 mm & base plate 260mm*260mm, 16 mm thickness IS-2062, 4 Nos. of "y'" type 24mm dia.,750mm length, with projected length of 125mm, Foundation bolts) having 3 mm thickness, of grade S355 and a vandal resistance, water proof door opening of approximate 500mm length at an elevation of 500mm from base plate for cable connection and including of GI bracket (of minimum 1000 mm length each from pole) supporting to min 02 street lights, on RCC foundation grade- M20 with base of depth 1700 mm including 200 from Free Ground level and width of 600 mm including the cost of foundation bolts, excavation and back filling complete in all respects as required as per relevant BIS/IS standards.

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 40 mm dia (OD-40 mm & ID-35 mm nominal)

Supply of PVC insulated PVC sheathed cable of 1.1KV grade armoured Underground aluminum conductor cable as reqd confirming to IS –7098 part I with up to date amendments) of the following size.

4X10 sqmm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL/HDPE pipe as required. (Above 35 sq mm and upto 95 sq mm)

Supply , Installation, of suitable size 3mm phenolic laminated sheet having 1 nos. terminal having 5 point for 3 phase, 1 netrual & 1 earth on and 1 no. SP MCB 5/6A , interconnection etc are required.

Supply and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. (conforming to IS 12943 (1990) or equivalent with upto date amendments)

4 X 10 sq. mm (25mm)

Supply and fixing of LED Street light fitting with mandatory driver set having die cast aluminium body and lenses suitable for 90 Watt with IP66 protection having Luminous 110Lm/watt to 125Lm/watt or Luminous should not be less than 4800 and having SPD with internal surge protection upto 4KV and External surge protection upto 10Kv, Line voltage protection upto 8Hrs autorestart having minimum 2 years warranty (Conforming to IP 65/IP66 protection and IS -16103-2012) as per direction of engineer-in-charge

Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. (conforming to relevant BIS/IS codes)

Supplying and drawing of Flexible PVC round insulated copper cable of following size

3 X 1.5 SQMM

Providing, Laying and fixing following dia G.I Pipe (Medium Class) in ground Completed with G.I fitting including trenching (75 cm deep) and re-filling etc as required

Supplying and fixing of Hot press moulded SMC junction Box of size 140x140x95 with 6A SP MCB, 2/4 way strip connector including testing commissioning etc. as reqd.(NABL certified as per ISO/IEC specification)

Provoding and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel making connections etc. as required.(100A, 30 KA FPMCCB)

M/S SAUMYA ENTERPRISES

Saurabh Enterprises

GENERAL ENGINEERS

SONA ENTERPRISES

Jaydeep Agency Corporation