Special Repair of DTL and Pharmacy Building in Shri Krishna Govt Ayurvedic College and Hospital at Kurukshetra.

Amount

Scraping of white wash on colour wash (HSR-8.32) (a)

Providing & laying two coat of wall putty (HSR-16.81)

Providing two coats of exterior acrylic emulsion paint. HSR-16.79 (a) (L/R )

Applying priming coat with cement primer in all shades on newly plastered or concrete exterior surfaces.(HSR-16.25)

Distempering with washable oil bound Distemper (of approved manufacture) two coats over one priming coat on new work. (HSR-16.58) (L/R )

Painting two coats with synthetic enamel paint in all shades on old wood-work or metallic or plastered or concrete surfaces to give an even shade including rubbing down old paint. (HSR-16.5) (L/R )

Dismantling Brick Work,Tile Masonry or Tile Lining and Tile Terracingin cement (HSR-8.5) b

Loading Unloading of Dismentling material Stone (building or pitching),sand, bajri, shingle, spalls, brick-bats, brick ballast and stone metal(HSR-4.1+5.2)a

Terracing consisting of 19mm thick heat resistant tiles for roof insulation, 300mm x300mm laid on 20mm thick 1:3 cement coarse sand mortar including grouting with neat white cement over average 75mm thick screed of 1:8:16 including two coats of bitumen laid hot at 1.65kg per sqmt on top of RCC slab & cleaning of top surface,(HSR-13.97) excluding tiles. (The heat resistant tiles will be provided by the department)

Provinding and laying white colour polythine micron thick under tiles for havinganti rain water formula (NS)

Scraping cement plaster (HSR-8.32) c

12 mm thick cement plaster 1:4 (HSR-15.5)

Cement concrete 1:2:4 gola 10cm X 10cm quadrant along junction of roof with parapet wall finished smooth, where specially specified.(HSR-13.64)

Laying and fixing Granite stone in all shades,15mm to 18mm thick in skirting/ dado, risers of steps, pillars and wall facing, laid in any pattern as specified over base of 12mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of granite including labour for fixing cramps pins and dowels etc. (excluding the cost of granite stone)(HSR-14.95)

Laying and fixing Granite stone in all shades,15mm to 18mm thick in flooring, laid in any pattern as specified over base of 20mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of granite stone. (excluding the cost of granite stone )(HSR-14.96)

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS;733 and IS;1285 fixed with rawlplugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom, and sides with required neoprene felt etc. aluminum sections shall be smooth, rust free straight mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing/panelling C.P brass /stainless steel screws, etc. complete. Shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC/ neoprene gasket required including aluminum fitting.Note: I) Add Rs.15/-Per Kg. extra if powder coating of 50 micron is done instead of anodizing in above item No. 9&10 (HSR-17.96)(i)

Providing and fixing 12 mm thick pre-laminated particle board flat pressed three layers or graded wood particle board conforming to IS; 12823 garage 1 type II in panelling fixed in aluminum doors. Windows shutters and partition frames with c.p. brass /stainless steel screws etc. complete. (b) Pre-laminated particle board with decorative lamination on both sides. (HSR-17.97) b

Providing and fixing glazing in aluminum door, windows, ventilator shutter and partitions etc. with pvc/neoprene gasket etc. complete (cost of aluminum snap beading shall be paid in basic items).(b) With float Glass panes of 5.00 mm thickness(HSR-17.98) b

Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS;6315 marked for doors including cost of cutting floors as required , embedding in floors and cover plates with brass pivot and single piece M.S. sheet outer box(a) With Stainless Steel cover plate.(HSR-17.99) a

Providing Aluminum Jali of thickness 7mm thick with openings - 75mm X 75mm of including anodizing and fixing in frame with cost of screws etc. complete.(HSR-17.100)

Supplying and fixing glass panes including special metal sash putty of approved make (b)glass panes 4 mm thick, exceeding 40 sq dm areas.(HSR-18.30) b

Conglomerate floor 50 mm thick cement concrete topping 1:2:4(HSR-14.10)

Floating coat of 1.50 mm thick neat cement laid in one operation to the topping.(HSR-14.3)

Providing and laying 60mm thick interlocking paver blocks of all shapes and colours in design mix cement M-35 over a bed of 25mm thick fine sand complete in all respect. (HSR-10.158) (L/R )

Cement Concrete 1:4:8 with stone aggregate 20mm nominal size in foundation and plinth.(HSR-10.38)

Providing and fixing six-levers brass 10 cm mortice latch and lock, and a pair of lever handles with necessary screws, etc., complete (Indian make of reputed firm, such as Godrej or eauivalent).(HSR-17.73)

Supplying, hoisting and placing in position tubular trusses including runners, purlins, consisting of steel tubesconforming to I.S. specifications of tested quality duly welded with fillet welds 6 mm thick through-out including wind bracing. Open end of pipe sealed with 3 mm thick plate including the cost of nuts and bolts where bolts connections are specified at flange joints including one coat of ready mixed red oxide zink cromate primer of approved quality assembling and fixed in position complete in all respect.(HSR-18.14)

Providing & fixing of polycarbonate sheat 1.25 mm thick PC lite sheet ( Ultra violet resistance ) make for wall with 10 years warranty complete in all respect as per direction of Engineer-in-Charge.

Providing and fixing in position 15mm i/d C.P. brass bib cocks of best quality (as required by the engineer-in-charge). (i) Bib cock long body (HSR-30.75) (a)

Bib cock (HSR-30.75) ( C)`

Providing and fixing in position C.P. brass stop cocks (as approved by the Engineer- in-charge 15 MM STOP COCK Stop cock male and female end (HSR-30.76) (A)

Providing and fixing 15 mm C.P. brass Laboratory cock swan neck of best quality (to the approval of the Engineer-in-charge) Two way(HSR-30.78) (b)

Providing and fixing HDPE water storage tanks of Sintex, Diplast, O.K. make with covers/lids marked with IS: 12701 on roof top of buildings including cost of hoisting and placing in position, making connections with inlet and outlet pipes, providing overflow & scour provisions with suitable plug on scour pipe including cost of nipples, washers, flanges for connections in tanks complete in all respects to the satisfaction of Engineer-in- Charge. (except civil work). 1000 ltr. capacity (HSR-30.119) (e)

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE (to the approval of the Closet set VITREOUSCHINAWARE W.C.PAN WITH horizontal inlet, for sinking into floor with A PAIR OF FOOTRESTS, 100 MM H.C.I’P’ TRAP WITH or without vent a required and suitable joint for closet inlet;(HSR-30.1) (i)

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE EUROPEAN TYPE WATER CLOSET SUITE WITH CONCEALED ‘P’ or ’S’ TRAP with or without vent (as approved by the Engineer-in-Charge) and all other necessary fittings as fully described in item no.30.3 above.White(HSR-30.6) (I)

EXTRA FOR providing and fixing 32 MM dia. G.I./C.P.FLUSH PIPE complete with accessories instead of 32/MM dia. galvanised telescopic flush pipe with clips (as required by the Engineer-in-charge). 32 mm dia. G.I. flush pipe(HSR-30.15) ( a)

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE C.P.BRASS INLET CONNECTION 15 MM WITH 375 MM PIPE AND C.P. BRASS NUTS (HSR-30.83)

PROVIDING AND FIXING IN POSITION AUTOMATIC BRASS BALL VALVES IN TANKS. 20 mm internal diameter (HSR-30.110) (B) (ii)

Supply and fixing of G.I pipe 15 mm Dia (N.S)

Supply and fixing of G.I pipe 20 mm Dia (N.S)

Supply and fixing of union 15 mm (N.S)

Supply and fixing of union 20 mm (N.S)

Supply and fixing of 25mm heavy quality ISI Mark B class gate valve

Providing and fixing in position best Indian make (Ordinary) lavatory suites consisting of Lavatory in vitreous chinaware size as given below ( to the approval of the Engineer-in-Charge).All brass work chromium plated and complete in all respects including cutting and making good the walls floors and painting of fitting etc. a) White(HSR-30.41) ( a) iv

PROVIDING AND FIXING IN POSITION ON BEST INDIAN MAKE CHROMIUM PLATED BRASS 2ND TAP FOR LAVATORY SUITE (HSR-30.45)

Recovery items: The rates quoted against recovery items will not be included in the total amount rather it will be deducted while calculating financial statement of the agency. Material obtained from dismantling of existing brick work, bituminous work have been calculated taking assumption that 80% of theoretical material will be retrieved. The dismantled material can used in any of the item for the work after modification (bringing it to required specifications) after approval from employer. In case it is not possible to use this material on the work, the agency can take away this material. This material can be taken away by the agency at the price quoted by the agency but minimum price to be quoted is limited to reserve price as fixed and mentioned as under :- Note: All quantities of the above materials have been worked out on the basis of theoretical quantities laid on this road. However, agency may visit site before quoting rates and assess the extent of retrieved material. There shall be no measurement after actual dismantling and if material after dismantling is found on lesser side, no claim of agency on this score will be entertained and full recovery on the basis of quoted rate and quantity exhibited in the BOQ shall be made. The reserve rates are minimum rates to be used as base for quoting purchase rate by the agency. No rates below the reserve price will be entertained and reserve price will be considered for all purposes in case the agency quotes lesser than reserve price. Brick bats@ Rs. 500/- per cum

(i) Old bricks @ Rs. 4.50/- each Note: In case of any difference in the unit & nomenclature of any of the HSR items depicted in this DNIT and that given in HSR, the unit and nomenclature given in HSR shall be applicable.

Amandeep Burra