SPL REPAIR TO T 5 OF TB III IN MEG AND CENTRE UNDER GE NORTH BANGALORE

Amount

Demolition of cement concrete and paving not exc 15 cm thick including tiling in ground/first floor etc complete all as directed .

75 mm thick cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate as in plinth protection including forming groove 10 mm wide & 30 mm deep & filled with bituminous filler complete all as directed .

40 mm thick cement concrete 1:2:4 type B-1, (using 20 mm graded stone aggregate), as in sub base to floor complete all as directed

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, Brushing neat cement slurry with 3.0kg of cement per sq. metre etc.complete all as directed

Non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, etc. over and including 15mm thick screed bed in CM 1:6.complete all as directed. Make: Blanco Nieve/Crema of Kajaria or eqivalent of Rak/Johnson/Somany

Glazed ceramic tiles in vertical surfaces 350 x 250x 7 mm thick / 450 x 350 x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in CM 1:4 complete all as directed.

Taking down cement plaster on brick/stone/concrete surface including wall tiling etc and hacking out joints hacking for key scrubbing down with water etc.complete all as directed .

Rendering 15mm thick in CM 1:4 on other than fair faces of brick work or concrete block walling surfaces finished even and smooth without using extra cement complete all as directed.

Rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete block walling surfaces finished even and smooth without using extra cement complete all as directed.

Rendering 5 mm thick on surface of concrete ceiling in CM 1:3 finished even and smooth with out using extra cement complete all as directed.

Preparation of new plastered surface on ceiling and applying three coats of white wash complete all as directed.

Demolition of brick work /stone masonry built in cement mortar of any description all as directed.

Precast cement block masonry with solid blocks grade C-5 ,exc 10cm in width and setting in cement mortar 1:4 complete all as directed.

Taking down chowkat (without taking of shutter from the frame) not exc 1.5 sqm each including making good the disturbed surface in PCC 1:2:4 type B0 or CM 1:3 complete all as directed.

All as per item No.14 above but exc 1.5 sqm and n exc 4 sqm each

Pressed steel frames of size 125 x 60mm for doors with one or more rebates(02 rebates) including necessary fixing lugs, hinges, lock strike plate etc, complete all as directed.

Factory made 35 mm thick 2nd class hard wood shutters of plain framed, paneled shutter (two panel) with lock rail and panel of 9mm thick commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stiles as per IS: 1003 (part-I), kiln seasoned and chemically pressure treated complete all as directed.

35mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 (a);and fitted to chowkats complete all as directed.

Butt hinges MS 100 mm cold rolled mild steel powder coated complete all as directed

200 mm size aluminium anodised, barrel tower bolts of extruded section and fixed complete all as directed.

300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as directed.

150mm size aluminium handles, cast type, anodised, complete all as directed.

Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.18 mm fixed with MS screw & bolts in repairs complete all as directed.

4mm thick sheet glass ordinary quality and glazing with putty/beading in squares not exc 0.50 Sqm in each pane complete all as directed.

4mm thick sheet glass ordinary quality but frosted on one side and glazing with putty/beading in squares not exc 0.50 Sqm in each pane complete all as directed.

Cement concrete type B0 1:2:4(using12.5 mm graded stone aggregate) for filling of pressed steel frame complete all as directed.

Cutting holes in brick walls (depth of embedded portion of hold fast exc half brick and n exc one brick) in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B1(using 20mm graded stone aggregate) as required complete all as directed.

Drapery rod of high strength aluminium rod powder coated (Coating Minimum 40 micron) of outer dia 28mm and inner dia 24.5mm with 2 nos brackets(projected type/wall to wall),finials and rings (8 rings per Meter) complete all as directed. Make: Sleek line type-II of Mac or Soffio-II of Vista Levolor or equivalent

Dismantling asbestos cement (corrugated, semi corrugated, etc) sheets in roof coverings, complete all as directed.

Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as directed.

Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding, valley gutter ridge, fixed with self tapping screws complete all as directed.

Dismantling structural steel work including doors gates but excluding framed truss complete all as directed.

Fixing only rolled mild steel as in roof trusses (framed/unframed) purlins, rafter, trusses, rails and wind tie etc (Tee, Angle, channel or flat sections) including distance pieces etc of grade Fe 410-W complete all as directed.

Rolled mild steel as in roof trusses (framed/unframed) purlins, rafter, trusses, rails and wind tie etc (Tee, Angle, channel or flat sections) including distance pieces etc of grade Fe 410-W complete all as directed.

Dismantling of ceiling boards any description fixed in any thickness and in any position with screws/ nails including cover fillets/ battens complete all as directed.

False ceiling with snap grid and panel board complete all as specified and as directed.

Preparation of new steel surface and applying two coats of synthetic enamel paint over a coat of red oxide primer over 10cm width or girth complete all as directed.

Preparation of old steel surfaces over 10cm width or girth and applying a coat of synthetic enamel paint complete all as directed.

Preparation of new wood surfaces and applying two coats of synthetic enamel paint over a coat of pink primer over 10cm width or girth complete all as directed.

Preparing newly plastered surfaces and applying two coat of oil bound distemper over a coat of alkali resistant primer on walls including in narrow width bands cornice spinsters etc complete all as directed.

Preparing newly plastered surfaces and applying two coat of cement based paint over a coat of primer on walls including in narrow width bands cornice spinsters etc complete all as directed.

Preparing old plastered surfaces including brooming down with steel wire brushing, scrapping down soots, moulds, moss and efforescence, salts, treating oil and greasy spots etc and applying two coats of white wash on ceiling surfaces complete all as directed.

Excavation in trenches in hard/dense soil not exc 1.5 mtr wide and not exc 1.5mtr in depth ; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5m in depth complete all as directed.

Cement concrete 1:4:8 type D2, (using 40 mm graded stone aggregate), as in foundations, filling and mass concrete complete all as directed.

RCC M 25 (Design mix) as in Footing and plinth beam etc complete all as directed.

RCC M 25 (Design mix) as in columns, pillars, piers, posts, struts and the like complete all as directed.

RCC M-25 (Design mix) as in slabs supported on walls, beams, and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as directed.

RCC M 25 (Design mix) as Beams, cantilevers, bressummers, lintels over 1.5m span complete all as directed.

RCC M 25(Design mix) as in chajjas complete all as directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work, vertical or to batter for rough finished flat surfaces of complete all as directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions, square, rectangular or polygonal for rough finished flat surfaces of concrete complete all as directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as directed.

Formwork to soffits of suspended slab such as roof slab, floor slab, landing and similar work n.exc 200mm thich(horizontal or slopping) complete all as directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thickness complete all as directed.

Removing excavated material to a distance exc 1.5 km but n.exc 50 mtr and depositing where directed complete all as directed.

Machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab over and including 20mm thick screed bed of CM 1:4 including rubbing and polishing complete all as directed.

Demolition stone slab and tiles of any description or thickness in floors laid bedded and pointed in any mortar complete all as directed.

Machine cut kota stone slab 18-20mm thick in riser of steps, skirting, dado and pillar laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab laid over and including cement 10 mm thick rendering CM 1:4 including rubbing and polishing complete all as directed.

Rounding to edges of stone slabs one edge, such as in steps cooking platform, and other similar situations including rubbing and polishing complete all as directed.

Matt finished ceramic tiles 9-10 mm thick 60cmx60cm (Rectified Digital Floor Tiles) in floor set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10 mm thick screed bed in CM(1:6) complete all as directed Make: Satin series of Kajaria or eqivalent of Somany/Rak/Johnson

Same as above but in skirting set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10 mm thick screed bed in CM(1:4) complete all as directed

Gun metal globe or gate valve 20mm bore with iron wheel head, screwed both ends for iron pipe and fixed complete all as directed.

Bib tap cast copper alloy chromium plated fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15mm bore (ISI marked) fixed in repairs, complete all as directed. Make: PIS-08H of Prayag or eqivalent of Essco/Seiko/Hindware

Angle valve 15mm bore, cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions and fixed in repairs, complete all as directed. Make: PIS-10H of Prayag or eqivalent of Essco/Seiko/Hindware

PVC connection 15mm size with PTMT nuts on both ends of length 600mm complete all as directed.

Solid PVC door frame of size 50mm x 47mm made out of 5mm plaint colour PVC sheet reinforced with MS square tube, and fitted in opening complete all as directed.

Factory made solid PVC moulded door shutter with particle board core 28 to 30mm thick (style) with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, fixing in frame at site complete all as directed.

150 mm size aluminium anodised, barrel tower bolts of extruded section and fixed complete all as directed.

Aluminium anodised Butt hinges 100 mm long complete all as directed

Vitreous china wash down water closet pan (pedestal pattern) white (excluding fixing bolts, flushing cistern and flush pipe ) and trap , including connection to drain (or out going pipe) and to flushing pipe , anti syphonage pipe ,etc and plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device as in repairs complete all as directed.

Vitreous china bowl urinal flat back of size of 465x355x265 mm including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, flush pipe and waste pipe as in repairs complete all as directed.

Vitreous china squatting pan Orissa pattern size 580x440mm white with integral foot rest including P or S trap and concrete for necessary fixing complete in repairs, complete all as directed.

10 ltr capacity PVC valve less symphonic action type flushing cistern low level white with inlet ball valve, float and handle/push including brackets and PVC flushing pipe 32mm bore, fixed in repairs, complete all as directed. Make: Cat no-502 of Prayag or eqivalent of Hindware/Parryware/Cera

Rotational moulded polyethylene water storage tanks (three layer) (cylindrical vertical with closed top) hoisted and fixed in positions all as specified in SSR Part-I, capacity of tank 2000 liters fixed in repairs, complete all as directed.

Rotational moulded polyethylene water storage tanks (three layer) (cylindrical vertical with closed top) hoisted and fixed in positions all as specified in SSR Part-I, capacity of tank 1000 liters fixed in repairs, complete all as directed.

Ball brass valves, high pressure, with polythene float and fly nut complete screwed for iron pipe or brass ferrule, 20mm bore, fixed in repairs, complete all as directed.

Aluminium ventilator as per Drg TD-542 of HQ CE Chennai Zone complete all as specified and directed.

Soap dish fancy type of PTMT complete all as directed. Make:- Prayag/Shakti/Polytuf

PVC (SWR) multi floor trap 75 mm dia, plain with grating including jointing with solvent cement complete all as directed.

Demolition and breaking up drain pipes of dia 100/150 mm (Salt glazed ware, AC UPVC or Reinforced concrete) set in cement mortar complete all as directed.

110mm bore PVC SWR pipe single socket in any length with rubber ring joints laid in trenches or in floors complete all as directed.

75mm PVC SWR pipe single socketed in any length with rubber ring joints laid in trenches or in floors complete all as directed.

18 to 20mm thick Plywood, grade MR, type BB fixed with screws to timber frame work complete all as directed.

0.9mm thick Decorative laminate type 1, of surface finish, colour and pattern as approved, fixed with approved adhesive as per maker's instructions complete all as directed.

40mm continuos (piano) hinges ,mild steel bright finish or electrogalvanised complete all as directed.

100mm Hasp and staple mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as directed.

vitreous china wash basin white flat back size550x400mm excluding chain and plug and porcelain stopper but including CI bracket. PTMT waste coupling and PVC waste pipe 75 cm long and 15mm dia PVC connection Pillars taps fancy type cast copper alloy fancy type, Stop valve fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm dia as in repairs complete all as directed.

75mm bore PVC (SWR) bends with access door complete all as directed.

110mm bore PVC (SWR) bends with access door complete all as directed.

110 mm bore PVC (SWR) junction single (single T) equal or unequal with access door complete all as directed.

PVC (SWR) floor trap, with grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4) complete all as directed.

Taking up or down steel tubing 15mm bore and connections complete all as directed.

Taking up or down steel tubing 20 mm bore and connections complete all as directed.

20 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as directed.

25 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as directed.

PTMT health faucet for pedestal pattern water closet with CP flexible pipe length 1.2cm complete all as directed. Make: BEA-84 of Prayag or eqivalent of Essco/Parryware/Hindware

Demolition of RCC of any Description and in any position not otherwise specifically provided for complete all as directed.

TMT bars 10mm dia and over cut to length bent to shape required, including, cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as directed.

All as per item No. 99 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as directed.

15 mm thick screed bed in cement mortar 1:4 with using water proofing compound as per manufacture's instructions over the roof slab complete all as directed. Note :- Waterproofing compound shall be measured and paid separately.

Supply only integral water proofing compound complete all as directed

APP modified prefabricated water proofing membrane mineral finish, 3 mm thick and weighing not less than 3.60 kg/sqm reinforced with non woven polyester matt black finished over compatible primer at 0.40 Ltr/Sqm and torch applications of membrane with 75 mm overlap and 100mm end lap after necessary preparation of surface complete as per manufacturers instructions and applying a coat of solar reflective bituminous Aluminium paint @ 0.10 Kg/Sqm. Complete all as directed.

Steel window with box type frame(80x60x12.5mm profile sheet for frame) with box type shutter inside glazed shutter and outside gauged shutter with steel handle, telescopic pegs stay complete with glazing bars and 08 nos of 10x10 mm square guard bars in equal spacing, dovetailed or welded as per TD Drg no 539 of HQ CE Chennai Zone including one coat of red oxide primer complete all as directed. Note: PCC in frame, glass pane and wire mesh shall be measured and paid seperately

Chequered cement concrete tiles 30 cmX30 cmX25 mm thick set jointed and pointed in neat cement slurry in floor with grey cement and pigments and over and including15mm thick screed bed in CM 1:6 complete all as directed.

Pre-cast cement concrete type B-1 1:2:4 (using 20mm graded stone aggregate) as in cover slabs (for manholes etc) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and set in CM 1:4 complete all as directed.

Taking down carefully aluminium/ copper wiring/power point wiring (light, fan, socket or power) complete including fittings such as switches ceiling roses, regulators, sockets light fittings, fans etc and making good the disturbed surface of walls, ceiling etc including painting with same colour of the back ground complete all as directed.

Wiring complete with 1.5 Sqmm single core FRLS PVC insulated unsheathed cable 1100 volts grade multi stranded with copper conforming to IS 694 drawn through and including non metallic rigid PVC conduit including accessories concealed in walls including MS terminal boxes fabricated with 1.6mm thick MS sheet concealed in walls with plastic laminated sheet top cover 3mm thick fixed with cadmium plated iron screws for housing the switches, switch sockets outlets, fan regulators etc including 1.5 Sqmm FRLS PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as directed for following:-

one light point controlled by one switch.

One fan point controlled by one 5 Amps switches/regulator.

One 3 pin socket point 5 Amps on independent board.

One 3 pin socket out let 5 Amps on same board.

One Light point controlled by two 2 -way switches

Wiring complete with 2.5 Sqmm single core FRLS PVC insulated unsheathed cable 1100 volts grade multi stranded with copper conforming to IS 694 drawn through and including non metallic rigid PVC conduit including accessories concealed in walls including MS terminal boxes fabricated with 1.6mm thick MS sheet concealed in walls with plastic laminated sheet top cover 3mm thick fixed with cadmium plated iron screws for housing the switches, switch sockets outlets, including 2.5 Sqmm FRLS PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as directed.

Note for Item No 108 & 109 :- (i) The earth wire for the points in the same circuit can be looped from point to point (ii) Earth wire shall be taken inside the conduit (iii) Cost of terminal box and laminated sheet in the item rate quoted for point wiring.

Wall mounted LED batten 1x20W 4 feet extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver light fitting, complete with all accessories internally pre-wired & including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as directed. Make:-Polycab cat part No L000103076 or equivalent model of Havells/Wipro/Bajaj/Jaquar

Angle holder PVC/polycarbonate with back plate suitable for batten fittings complete all as directed.

Switch piano , flush type single pole, 5 Amps one way complete all as directed.

Switch socket combination 2 in 1, 3 pin 5 and 15 Amps flush type universal complete all as directed.

Switch socket combination 2 in 1, 3 pin 5 Amps flush type universal complete all as directed .

MCB single pole 240 volts 5 to 40 Amps (Curve-C) complete all as directed. Note : Rating of MCB shall be decided by Engr-in-charge.

MCB SPN 6-40 Amp (Curve-C) (ISI marked), complete all as directed. Note : Rating of MCB shall be decided by Engr-in-charge.

RCBO Four pole 100 mA, 415 volts 63 Amps for earth leakage ,over load & short circuit protection complete all as directed

Ceiling rose surface type Bakelite of size 65 x 50 mm, 2 to 3 terminals complete all as directed

Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of earth plate at a depth not less than 1.5 mtr connected to galvanized earth lead wire 4 mm dia as earth lead up to 7.5 mtr long by means of nuts, bolts, thimbles, check nuts and washers etc made of galvanized iron connected to earthing test point all as shown in electrical plate No 3 of SSR Part-I 2010 and as specified or indicated and testing on completion including earth work and excavation in any type of soil PCC (1:3:6) type C1 chamber, pre cost slab 40mm thick in cement concrete (1:2:4) type B1 with 8 mm dia MS bars reinforced at 10 cm centre to centre both ways including funnel with watering pipe wire mesh and lugs, including test point complete all as directed.

Removing of unserviceable ceiling fan/ Exhaust fan and cleaning servicing, changing of bearing, rubber bush nut bolts and writing of MES/SL no, painting and refixing complete all as directed. Note: Supply only Ball bearing shall be measured and paid seperately.

Supply only ball bearing suitable for ceiling fan 1200mm sweep complete all as directed. Make: SKF or equivalent

Stepped type electronic fan regulator flush type, complete all as directed

Sub main wiring 1100 volts grade multistranded PVC insulated FRLS copper conductors two runs of single core 6 sqmm along with 6 sqmm PVC insulated FRLS single core multistranded copper conductor cable as earth continuity conductor run along in concealed PVC conduit including taking down old submain wiring complete all as directed.

False ceiling fitting LED 12 watts ,6500 k ,230 Volts, 154 mm dia recess mounted round panel with aluminium die cast housing type including Electric connection as in repair compiete all as directed. Make:-Polycab cat part No LD00125033 or equivalent model of Havells/Wipro/Bajaj/Jaguar

MCB DB SPN 8 way double door with Acrylic Window 240 volts with 200 Amps rated bus bar for housing MCBs compete all as directed.

MCB DB TPN 4 way double door 415 volts with 200 Amps rated bus bar for housing MCBs compete all as directed.

Switch piano flush type single pole two way 5Amps compete all as directed.

1x 45W LED bldg Security light made up of pressure die cast housing with toughened glass and including high power LED's with secondary optics IP 66 protection and impact resistance Make:-Polycab cat part No.PUB0506028 or equivalent model of Havells/Wipro/Bajaj/Jaguar

Removing the existing old GI bracket and provision of new GI bracket made out of 25 mm dia GI tubing light grade of approx length 1.5 m size fabricated to a shape including necessary fixing clamps, bolts, nuts & washers all as specified and as directed.

Sand cushioning to under ground cable in layers (8 cm before laying the cable and 15 cm after laying the cable in trenches for cable protection complete all as directed. Note : Punned / completed thickness shall be measure for payment purpose.

Sub class B,with designation 75, burnt clay bricks for cable protection complete all as directed.

Supply, laying, commissioning and testing XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured power cable (Heavy duty) with aluminium conductor, 1100 volts grade, cross sectional area 25 sqmm, 4 core laid in trenches/ wall/ceiling complete all as directed.

Sree Balaji Enterprises

N RAJEGOWDA and CO

Meghana and Gowda Enterprises

AFSON ENGINEERS & CONTRACTORS

Gnani Builders

Vinayaka Enterprises

M.S.Trading Company

George Electricals