Providing and fixing Open / Green Gym item in Naglone Village under Kuchana Housing Complex of Majri Area

Amount

Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement:1½coarse sand (zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M - 30 grade made of C&D waste by block making machine with vibratory compaction laid in required pattern and including over 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

Providing and fixing Shoulder Wheel with center pipe shall be minimum 100mm NB dia of thickness not less than 3.00mm, support frame shall be minimum of 32mm NB dia of thickness not less than 3mm are 'B' class heavy grade of with hot dipped galvanised with minimum of 80 to 90 microns zinc dipped joint with robotic welded, the rings are hinged over 32NB support frame with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. Pole caps are made of HDPE material,etc. all complete job as per the instruction of Engineer in charge.

Providing and fixing Eliptical Croos trainer with center pipe shall be of minimum 80mm NB dia of thickness not less than 3.00mm, support frame shall be minimum of 32mm NB dia of thickness not less than 3mm are'B' class heavy grade of with hot dipped galvanised with minimum of 80 to 90 microns zinc dipped joint with robotic welded. The pedal frame are hinged over 80NB prime stand pipe with the help of specially heavy duty bearings should be reputed make and press fittted for smooth rotation, and does not require re-lubrication i.e., maintenance -free ball bearing, pole Caps are made of HDPE material etc. all complete job as per the instruction of Engineer in charge.

Providing and fixing Tripple Twister with center pipe shall be of minimum 100mm NB dia of thickness not less than 3.00mm, support frame shall be minimum of 32mm NB dia of thickness not less than 3mm are 'B' class heavy grade of with hot dipped galvanised with minimum of 80 to 90 microns zinc dipped joint with robotic welded. The twister plate is hinged over 80NB standing pipe with the help of specially heavy duty bearings should be reputed make and press fitted for smoooth rotation, and does not require re-lubrication i.e., maintenance- free ball bearing.Pole Caps are made of HDPE material etc . all complete job as per the instruction of Engineer in charge.

Providing and fixing Double Air walker with center pipe shall be of minimum 73mm NB dia of thickness not less than 3.00mm, support frame shall be minimum of 32mm are 'B' class heavy grade of with hot dipped galvanised with minimum of 80 to 90 microns zins dipped joint with robotic welded. The two pedestal frames are hinged over 75NB prime stand pipes with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance -free ball bearing. The foundation pipe with anchoring shall be 750mm deep with minimum of 100mm NB dia suppoted with M.S. Angle, pole Caps are made of HDPE material ,etc. all complete job as per the instruction of Engineer in charge.

Providing and fixing surf Board *with center pipe shall be of minimum 75mm NB dia of thickness not less than 3.00mm, Support frame shall be minimum of 32mm NB dia of thickness not less than 3mm are 'B' class heavy grade of with hot dipped galvanised with minimum of 80 to 90 microns zinc dipped joint with robotic welded *The two pedestal frames are hinged over 75NB prime stand pipes with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing.,etc. all complete job as per the instruction of Engineer in charge.

Providing and fixing Knee Chair *with center pipe shall be of minimum 75mm NB dia of thickness not less than 3.00mm, Support frame shall be minimum of 32mm NB dia of thickness not less than 3mm are 'B' class heavy grade of with hot dipped galvanised with minimum of 80 to 90 microns zinc dipped joint with robotic welded *The two pedestal frames are hinged over 75NB prime stand pipes with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing.,etc. all complete job as per the instruction of Engineer in charge.

Total impact of GST for the purpose of CTC

TWINKLE ENTERPRISES

DD Fibrotech

Md. Aslam Beg

Shiladevi Asit Yadav

Prashant Warambhey

Mangesh Bramhadev Mandhare

M Q CONSTRUCTION