Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.5 LAccepted-AOC MAIN ROAD KANDOLI NAGROTA JAMMU J K 181221 | JAMMU | JAMMU AND KASHMIR | 181221 | L1 | Accepted-AOC Being lowest bidder after deducting the sch of credit of Rs. 109560.00 | |
| 2 | L2₹21.3 L+₹2.8 L (15.0%)Rejected-Finance CHHURTA JHAJJAR KOTLI JAMMU J K 181222 | 181222 | L2 | Rejected-Finance 2ND LOWEST BIDDER AFTER DEDUCTING SCH OF CREDIT RS 109560/- | |
| 3 | L3₹22.3 L+₹3.8 L (20.5%)Rejected-Finance | L3 | Rejected-Finance 3RD LOWEST BIDDER AFTER DEDUCTING SCH OF CREDIT RS 109560/- | |
| 4 | L4₹25.0 L+₹6.5 L (35.0%)Rejected-Finance NEAR PUNJAB NATIONAL BANK KANDOLI NAGROTA JAMMU J K 181221 | JAMMU | JAMMU | JAMMU AND KASHMIR | 181221 | L4 | Rejected-Finance 4TH LOWEST BIDDER AFTER DEDUCTING SCH OF CREDIT RS 109560/- | |
| 5 | L5₹25.8 L+₹7.3 L (39.8%)Rejected-Finance NEAR INDUSTRIAL ESTATE THANDA PADDAR UDHAMPUR J K 182101 | UDHAMPUR | JAMMU AND KASHMIR | 182101 | L5 | Rejected-Finance 5TH LOWEST BIDDER AFTER DEDUCTING SCH OF CREDIT RS 109560/- |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
4 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(Army) Dhar Road
GE(Army) Dhar Road
COMPREHENSIVE REPAIRS TO EM INSTALLATION AND OTHER MISC BR WORKS AT DEPOT AND ADM AREA AT JINDRAH UNDER GE ARMY DHAR ROAD
2023_MES_601450_1
8069/NIT-43/2023-24
Open Tender
Civil Works
Item Rate
270 days
GE(Army) Dhar Road
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
Yes
GE(Army) Dhar Road
₹50,000
Yes
1 Sept 2023
6 Jun 2023
6 Jul 2023
7 Jun 2023
4 Jul 2023
20 Jun 2023
Amount
Taking down shutters of any description exc 1 sqm and not exc 2 sqm each complete all as specified and directed
Taking down chowkhats or frame not exc 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed
Taking down chowkhats or frame exc 1.5 sqm but not exc 4.00 sqm each with shutters (without taking off shutters from the frame) and removing to or from site complete all as specified.
S & F pressed steel frames 125 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.
S & F 35 mm thick factory made plain shutters second class hardwood rails and style, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.
S&F 35mm thick well seasoned second class hardwood glazed and skeleton shutter open rebated and prepared to receive glass/gauge without sash bars edge of framing plain chamfered or round, fitted with cut and mitred bends for securing glass gauge etc provided with styles and rails etc size of member of shutters with antifungal and antitermite preservation as per IS as specified in SSR part-I Sec-8 clause 8.24(a) fitted to chowkhats complete all as specified.
S & F Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with mild steel square tube, supplying and fixing in opening as per specification and drawing complete all as specified and directed.
S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawings on page 146 of SSR Part - II 2004 complete all as specified and directed.
M & L preparing surfaces of wood and wood based materials, steel and iron work, new or old, treating small articles such as stop, covers, gully grating, holdfasts, ends of posts, back of chowkats, etc., area not exc 0.1 sqm and treated with tar or coal tar black paint, each complete all as specified and directed
M&L Providing Cement concrete Type C1 1 : 3 : 6 (20mm graded aggregate) as in hold fasts, lintels, upto 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses copings kerbs etc slightly rounded or chamfered angles and throating complete all as specified and directed.
S & F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed
S & F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed
S & F steel ventilator with top hung shutter including hinges, steel peg stay complete all as specified and directed
S & F mild steel framed work such as grills, grating, etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, frame work of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips complete all as specified and directed
S & F transparent fibre sheet glass 4 mm thick plain ordinary quality and fixing with white silicon using silicon fixing gun in square not exc. 0.5 sqm in each pane complete all as specified and directed
S & F figured glass, 4 mm thick pin head type and glazing with oil putty in square not exc. 0.5 sqm in each pane complete all as specified and directed
S & F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed tinned tacks, or galvanised wire staples complete all as specified and directed.
S & F in repairs galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed tinned tacks, or galvanised wire staples complete all as specified and directed.
M & L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one priming coat of pink primer complete all as specified & directed.
M & L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a priming coat of red oxide zinc chrome primer complete all as specified and directed.
S & F 150 mm aluminium handles, cast type, anodised complete all as specified and directed.
S & F 100 mm aluminium handles, cast type, anodised complete all as specified and directed.
S & F 200 mm aluminium anodised, barrel, tower bolts of extruded section fixed complete all as specified and directed.
S & F 100 mm aluminium anodised, barrel, tower bolts of extruded section fixed complete all as specified and directed.
S & F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections complete all as specified and directed.
S & F 100 mm butt hinges, medium weight cold rolled mild steel, complete all as specified and directed.
S & F 75 mm butt hinges, medium weight cold rolled mild steel, complete all as specified and directed.
S & F 20 mm bore dia of pipe ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Min weight 210 gms) of approved make complete all as specified and directed
S & F in repair 20 mm bore dia of pipe ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Min weight 210 gms) of approved make complete all as specified and directed
S & F in repairs bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule for 15 mm bore pipe complete all as specified & directed.
S & F in repairs stop valve, 15 mm bore dia cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified & directed.
S & F in repairs 15 mm dia pillar taps, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed
M & L for taking up or down steel tubing and connections 15 mm bore incl cleaning for refixing or removal to store complete all as specified and directed.
M & L for taking up or down steel tubing and connections 20 mm bore incl cleaning for refixing or removal to store complete all as specified and directed.
S & F steel water tubes 15 mm bore, medium grade, galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
S & F steel water tubes 20 mm bore, medium grade, galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
S & F in repairs 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed.
S & F in repairs vitreous china squatting pan, Orissa pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe), including connection to trap, and to flushing pipe, anti syphonage pipe, etc., complete including making good to floor complete all as specified and directed.
S & F in repairs vitreous china urinal, bowl type flat back, size 465 x 355 x 265 mm white (minimum), includind poviding and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal tpo plugs with and including 60 mm long brass screws , pointing around urinal back in cement with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed
S & F in repairs 125 mm brass chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.
S & F in repair brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified and directed.
S & F in repairs vitreous china wash basin, white, flat back, size 550 x 400 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets incl 32 mm waste fittings, brass, chromium plated for glazed ware sinks, basins etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.
S & F PVC connection 15 mm size with PTMT nuts of length 450 mm long complete all as specified and directed.
S & F in repairs sinks with drainage board made of stainless steel 1.0 mm thick kitchen with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.
S & F in repair Grating doom 100 mm dia of PTMT (Min weight 25 gms) complete all as specified and directed
S & F Grating doom 125 mm dia with waste hole of PTMT (Min weight 40 gms) complete all as specified and directed
S & F curtain Harrison rails, mild steel, chromium plated 18-20 mm dia with fixing brackets, stops, rollers etc,. complete all as specified and directed.
S & F in repair 32 mm waste fittings, brass, chromium plated for glazed ware sinks, basins etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.
S & F 32 mm PVC flush pipes of polyethylene of low or high density for low level cistern to padestal pan including all joints complete all as specified and as directed
M & L for dismantling of water tank of capacity exc 250 and not exc. 500 litres and removing to store and supply and fixing of 500 Litres rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top & FDA approved, tripple layer body, 100% UA stablised, rust proof) hoisted and fixed in position all as specified in SSR Part-I, complete, all as specified and as directed. Note : Water storage tank shall be White and screwed lid
M & L for dismantling of water tank of capacity exc 500 and not exc. 1000 litres and removing to store and supply and fixing of 1000 Litres rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top & FDA approved, tripple layer body, 100% UA stablised, rust proof) hoisted and fixed in position all as specified in SSR Part-I, complete, all as specified and as directed. Note : Water storage tank shall be White with screwed lid
Excavating in trenches, not exc 1.5 m wide and not exc 1.5 m in depth for foundation etc., or for shafts, wells, cesspits, manholes, pier holes etc., not exc 10 sqm on plan and not exc 1.5 m in depth and getting out in any type of soil complete all as specified and directed
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in any type of soil complete all as specified and directed
Removing excavated material (soils) not exc. 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed
M & L for cement concrete 1: 4 :8 type D 2 using 40 mm graded stone aggregate as in foundation filling and mass concrete etc complete all as specified and directed.
Demolition of cement concrete (reinforced) (reinforcement cut as required to facilitate demolition) as in roofs, floors (other than ground floors), beams, staircase, landing, chajjas and similar suspended work not exc 15 cm thick complete all as specified and directed
M & L for providing precast cement concrete type B1, 1 : 2 : 4 (20 mm graded aggregate) as in landing, cover slabs (for man holes etc) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in cement mortar 1:6 complete all as specified and directed
Use and waste form work to sides and soffits of floor or roof beams, beams haunching, girders, bressummers, lintels, cantilevers, shelves including supports, over hangs, etc. also splays between floors and beams etc for flat rough finished surfaces of concrete complete all as specified and directed.
Use of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete walls, floor and roofs not exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but not exc 20 cm wide for rough finished surfaces of concrete complete all as specified and directed
M & L mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
M & L mild steel TMT bars 6 mm to 8 mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
M & L for providing RCC 1 : 2 : 4 Type B1 (20 mm graded aggregate) for slabs supported on walls, beams and column in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed
Demolition and breaking up drain pipes 150 mm internal dia of pipe (Salt glazed ware, AC or reinforced concrete) set in cement mortar complete all as as specified and directed.
M & L for 150 mm bore of pipe in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C2 complete all as specified and directed
M & L for 150 mm internal dia of salt glazed stoneware drain pipes laid in trenches and jointed complete all as specified and directed
Demoiltion/Dismantling and breaking up cast iron pipes of 75/100mm dia set in cement mortar and taking out of trenches and removing materials from site of work complete all as specified and directed
S & F 100 mm bore of cast iron pipe bends (any radius), diminishing pieces or tapers fitted with oval access doors complete all as specified and directed.
S & F 75 mm bore of cast iron pipe bends (any radius), diminishing pieces or tapers fitted with oval access doors complete all as specified and directed.
S & F 100 mm sand cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed.
S & F 75 mm sand cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed.
S & F 75 mm bore of pipe cast iron cowls complete all as specified and directed
Demoiltion/Dismantling and breaking up PVC drain pipes of 75/100mm dia set in cement mortar and taking out of trenches and removing materials from site of work complete all as specified and directed
S & F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to trenches/floor complete all as specified and directed.
S & F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
S & F 110 mm bore PVC (SWR) pipes bends provided with access door any radius complete all as specified and directed.
S & F 75 mm bore PVC (SWR) pipes bends provided with access door any radius complete all as specified and directed.
Cutting into existing manholes for connecting new drains, making good to 150 mm dia pipe and rendering, cutting out existing beching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required complete all as specified and directed
S&F in repair 32mm dia PVC waste pipe for WHB complete all as specified and directed.
Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including racking out joints , hacking for key, scrubbing down with water, etc. complete all as specified and directed.
M & L rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. (Note: WPC shall be measured and paid separately under appropriate item as supply only)
Supply only integral water proofing compound complete all as specified and directed.
M & L rendering 10 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
M & L rendering 5 mm thick in cement mortar 1:3 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement as in ceilings etc. complete all as specified and directed.
M & L for preparation of new plastered or unplastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.
M & L for preparation of new plastered surfaces on walls, priming plastered and other surfaces with alkali resistant priming paint and applying two coats with distemper oil emulsion, white or tinted complete all as specified and directed.
M & L for preparation of new plastered surfaces of wall and applying two coats of cement base paint(camouflage pattern) distemper and priming plastered and other surfaces with chalk whiting, preparatory to distempering complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed
M & L for machine cut kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing incl screed bed or bedding layer of mortar 20 mm thick for laying floor finishes in CM 1:4 complete all as specified and directed.
M & L for machine cut kota stone slab 18-20 mm thick in riser of steps, skirting, dodo and pillar laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing incl screed plaster of 10 mm thick on fair faces of brick work in CM 1:4 complete all as specified and directed.
M & L marble work 18 to 20 mm thick (table rubbed and polished) as border strips of 150mm thick in floors etc. in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of Makrana White including screed bed of 20 mm thick in cement mortar 1:4 complete all as specified and directed.
M & L for glazed ceramic coloured tiles in vertical surface 300 x 200 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:3 for receiving tiles complete all as specified and directed.
M&L for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over screed bed or bedding layer of mortar 20 mm thick of cement plaster (1:6) complete all as specified & directed.
Demolition of cement concrete (unreinforced) in ground floor, paving not exc. 15 cm thickness (below or above ground level) complete all as specified and directed
Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stoneswork and precast concrete articles complete all as specified and directed
M & L for cement concrete 1: 4 :8 type D 2 using 40 mm graded stone aggregate as in foundation filling and mass concrete etc complete all as specified and directed.
M & L brick work with sub class 'B' bricks, straight or curved on plan exc. 6 mtr mean radius built in cement mortar 1:6 complete all as specified and directed.
M & L brick work with sub class 'B' bricks, straight or curved on plan exc. 6 mtr mean radius built in cement mortar 1:6 but (except bricks) complete all as specified and directed.
M & L for walling of random rubble stone masonary uncoursed well bonded , bedded and solidely hearted built in cement mortor 1:4 etc complete all as specified and directed.
M & L for walling of random rubble stone masonary uncoursed well bonded , bedded and solidely hearted built in cement mortor 1:4 except stone etc complete all as specified and directed.
Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses. Hammer dressing witrh maximum depression on face from straight edge held against the dressed surface not exc 20 mm in lime or sand stone complete all as specified and directed
Racking out joints/pointing to random rubble or polygonal rubble uncoursed or brought up to courses built in cement or cement lime mortar complete all as specified and directed.
M & L for raised pointing to random or polygonal rubble, uncoursed or brought upto courses in cement mortar 1:4 complete all as specified and directed.
M & L for providing precast cement concrete type C1, 1 : 3 : 6 (20 mm graded aggregate) as in bonders (for stone walling) etc., with plain fair faces including chamfered, weatherings throating etc., and setting in cement mortar 1:6 with joints to match complete all as specified and directed
M&L Providing Cement concrete 1 : 2 : 4 Type B1 (20mm graded aggregate) as in roof kerbs or mud stops,in lintels upto 1.5 m span, copings slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed.
M & L for cement concrete 1:3:6 type C2 using 40 mm graded aggregate as in surface channels and drains complete all as specified and directed
Extra over rendering or plastering for work in isolated widths or in widths not forming part of general plastering such as in drain or channels, bands, sunk panels, cornices, skirting, drip moulds and similar work exc 15 cm but not exc 30 cm in widths or girth, including cutting to edges, all mitres and stopped ends etc., complete all as specified and directed
Surface dressing not exc 15 cm deep in any type of soil complete all as specified and directed
75mm thick PCC 1:3:6, type C-2 using 40mm graded stone aggregates as in sub base of floor, finished even and fair, complete all as specified and directed.
M&L for 25mm thick sand filling under floors or in foundations including watering and consolidation as cushioning for laying of paver blocks complete all as specified and directed. Note :- Punned thickness of sand shall be measured and paid.
M & L for machine pressed precast concrete with grey cement and pigment interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade complete all as specified and directed.
M&L for machine pressed gloosy finish cement concrete chequered tiles of size 300x300x25mm, jointed and pointed in neat cement slurry with grey cement and pigments to match the colour of fills complete all as specified and directed.
M & L for screed bed or bedding layer of mortar 20 mm thick for laying floor finishes in cement mortar (1:6) complete all as specified and directed.
Dismantling wall and ceiling boards (fibre, pulp, gypsum, POP, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.
4mm thick Asbestos Cement plain building boards fixed to MS work/timber framework with screws complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed
S & F rolled mild steel work in tubular trusses, purlins etc. including special shaped etc complete using ERW or induction butt welded tubes conforming to Gde St-240 and painted one shop coat of zinc chromate primer paint (including preparation of surface) at contractor's workshop before fabrication complete all as specified and directed.
Dismantling of AC/CGI sheets( plain,corrugated, semi corrugated, etc.) sheets in roof coverings complete all as as specified and directed.
S & F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed
S & F pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws (for Ridge) complete all as specified and directed
M & L for 100 mm thick PCC 1:2:4 type B 1 using 20 mm graded aggregate as in flooring, including finishing surface even and smooth without using extra cement in alternate bays complete all as specified and directed
M & L for 75 mm thick cement concrete 1:3:6 type C 2 (40 mm graded aggregate ) as in plinth protection, finished even and smooth without using extra cement including forming joint to full depth at every 3.0 mtr interval and every change of direction and filled with mixture of bitumen and sand (1:3) by weight complete all as specified and directed
M&L for complete removal of existing treatment and preparing plastered or unplastered old surface of wall by applying one coat of primer on plastered and other surfaces with alkali resistant priming paint incl applying 3 mm thick wall care putty on priming and applying two coats with distemper oil emulsion, white or tinted complete all as specified and directed.complete all as specified and directed
M & L for preparation of old plastered surfaces of wall and applying one coat with distemper oil emulsion, white or tinted complete all as specified and directed.
M & L for preparation of old plastered surfaces of wall and distempering with one coat of cement base paint white or tinted complete all as specified and directed.
M & L for preparation of old plastered surfaces of wall and applying one coat of white washing complete all as specified and directed.
M & L for preparation of old plastered surfaces of ceiling and applying one coat of white washing complete all as specified and directed.
MandeepConstructionCo
MADAN LAL SHARMA AND SONS
M/s Khajuria Construction Co.
K S BUILDERS
SUBASH CHANDER
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .