COMPREHENSIVE REPAIR/ MAINT WORK FOR MD JCOs/ ORs ACCNS AT VIJAY LINES, MK LINES, NSL, KL, OSL AND QUEENS LINE, JK ROAD AREA UNDER AGE B/R-I UNDER GE(N) AHMEDNAGAR.

Amount

Demolition of brick work or stone/ boulder masonry/PCC block, built in cement mortar or cement lime mortar including all quoins, pillars etc.

M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6, all as specified and directed.

M&L for Plain Cement Concrete Type B0 1:2:4 (using 12.5 mm graded granite stone aggregate) in copings, kneelers, including weathering, slightly rounded or chamfered angles and throating, all as specified and directed.

M&L for special treatment to sunken portion with 10mm thick plaster in CM 1:4 with WPC liquid conplast x 421 IC of FOSROC or equivalent and applying one coat Each of Nittoproof 120 of FOSROC or equivalent on plastered surface rendering again 10mm thick in CM 1:4 mixed with complast - 421 filling the sunken floor with PCC 1:5:10 using brick bat area of floor upto 1.5 Sqm including 40 mm dia 0.60 m pipe etc complete all as specified and directed by Engineer-in-Charge. Note : Work has to be carried out strictly by the authonticated applicator of the manufacturer and as per manufacturers specification as approved by GE.

Taking down cement plaster on brick or concrete surfaces on wall/ceilling/stone/block etc including racking out joint, hacking for key,scrubbing down with water etc all as specified and as directed

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4, finished even and smooth without using extra cement, all as specified and directed.

M&L for rendering 10 mm thick in CM 1:6 over brick surfaces, finished even and smooth without using extra cement all as specified and as directed.

M&L for rendering 5 mm thick in CM 1:3 on ceillng, finished even and smooth all as specified and as directed.

M&L for applying two coats of OBD over a coat of primer on newly plastered wall surfaces over two coat of wall care putty preparation of surfaces all as specified and as directed.

M&L for preparing newly plastered surfaces of ceilings and applying three coats of white wash., all as specified and directed.

M&L for preparing new plastered surfaces and applying Two coats of cement base paint over a coat of alkali resistant primer on surfaces of walls. all as specified and directed.

Supply only integral water proofing compound.

M&L for preparing old surfaces of walls by brooming down or by steel wire brushing and applying one coat of white wash including scafolding at any height complete all as specified and directed by Enggineer-in-charge.

M&L for preparing old surfaces of ceilings by brooming down or by steel wire brushing and applying one coat of white wash including scafolding at any height complete all as specified and directed by Enggineer-in-charge.

M&L for preparing old painted surfaces by washing, rubbing down and stopping of distempered and painted surfaces and applying a coat of distemper oil emulsion on surfaces of walls including scafolding at any height complete all as specified and directed by Enggineer-in-charge.

M&L for preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint including scafolding at any height complete all as specified and directed by Enggineer-in-charge.

M&L for preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint (Ordinary tint) including scafolding at any height complete all as specified and directed by Enggineer-in-charge.

M&L for preparing old painted surfaces by washing, rubbing down and stopping of painted surfaces and applying a coat of cement base paint on surfaces of walls including scafolding at any height complete all as specified and directed by Enggineer-in-charge.

Demolition floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and removal of debries to a distance not exceeding 100m all as specified and as directed.

S&F Vitrified Ceramic tiles 8 to 10 mm thick (square/ rectangular) polished, of size 600 x 600, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:6, all as specified and directed.

S&F ceramic tiles 8 to 10mm thick (square/rectangular) polished, area of each tiles exceeding 0.18 sqm but not exceeding 0.36sqm,in vertical surfaces such as skitings, dado set and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10 mm thick in CM 1:4 on fair faces of brick or concrete surfaces of wall as in backing of skirting and dado all as specified and as directed.

S&F Non-skid Coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) size of each tiles 400x400 mm in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:6, all as specified and directed.

M&L for Glazed ceramic coloured tiles in vertical surface 350*250*7 /450x350x7mm to 8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match in backing of skirting and dado including rendering 10 mm thick in CM 1:4 on fair faces of brick or concrete surfaces of wall as in backing of skirting and dado all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar in floors aprons etc., all as specified and directed.

M&L for machine cut kota stone flooring 18-20 mm thick over Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc as directed by Er-In-Charge.

M&L for machine cut kota stone slab 18-20 mm thick in riser of steps,skirting,dado and pillar laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab over and including rendering 10 mm thick in CM 1:4 on fair faces of brick or concrete surfaces of wall as in backing of skirting and dado all as specified and as directed.

M&L for machine cut cudappah stone 18-20 mm thick over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L Rounding to edges of stone slabs one edge ,such as in steps cooking platform and other similar situations, all as specified and directed.

M&L 20mm thick granite (of any type ) work (table rubbed and polished ) in steps, jambs, pillars, window -cills, cooking platforms and like in cement (1:4) including pointing in wihte cement (1:2) using marble dust with admixture of pigment ot match with shade of granite., all as specified and directed.

Demolition of Cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) including floor finishes, all as specified and directed.

Material and labour for 75 mm thick plain cement concrete 1:4:8 type D2, using 40 mm graded stone aggregate as in sub base all as specified and directed.

M&L for rough dressed shahabad stone, 25 mm to 40 mm thick laid over and including 15 mm thick screed bed in cement and sand mortar (1:6), laid and jointed and pointed in cement and sand mortar (1:3) etc complete all as specified and directed by Engineer-in-Charge.

M&L for hardcore of gauge not exceeding 63 mm of broken granite stone, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface., all as specified and directed.

M&L for Providing and laying rubber moulded glossy finish 60 mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed.

M&L for Providing and laying at or near ground level factory made coloured kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete

M&L for 75 mm thick cement concrete type C-2, 1:3:6 (Using 20 mm graded aggregate) finishing cement concrete surface even and smooth without using extra cement as in plinth protection complete all as specified and directed.

Taking down of chowkat with shutter without taking off shutters from the frame exceeding 1.5sqm each but not exceeding 4 sqm all as specified and as directed.

Taking down of shutters of any description not exceeding 1 sqm each all as specified and as directed.

Taking down of chowkat with shutter without taking off shutters from the frame, not exceeding 1.5sqm each all as specified and as directed.

Taking down of shutters of any description exceeding 1 sqm each and not exceeding 2 sqm each all as specified and as directed.

M&L for re-fixining same opening of shutters of any description exceeding 1 sqm each and not exceeding 2 sqm each all as specified and as directed.

S&F IInd class hard wood plain solid, straight ,chowkats and frame, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints all as specified and as directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with mild steel Squartube with singal side prelam PVC sheet used instead of plain colour PVC sheed & edges will be painted to match with prelam sheet & fixed in position as per manufacturer's instruction all as specified, as shown on drawing on page No 180 of SSR Part-II 2020

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, with particle board coare supplying & fixing in frame at site as per specification & drawing on sl. page no. 181 of SSR part II 2020

S&F Aluminium framed windows any pattern, fixed/side hung/silding ( three track) using powder coated alluminium sections, of approved make with or with out sash bars suitable for 4mm thick glazing including necessary jointed cleats, glazing all as specified and including Powder Coating (minimum thickness of 50 micron) Note-: (glazing shall be measured and paid separatly)

S&F 30mm thick flush door shutter soild core construction with block board core and plywood face panels commercial type on both sides, all as specified and directed.

S&F second class hardwood glazed and skeleton shutters 35mm thick open rebated and prepared to receive glass gauge etc with sash bar divided into squares edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass or gauze etc sizes of members of shutters as specified in SSR part-I section 8 clause 8.20 (a) fitted to chowkats .

Hacking out old broken glasses any thickness, size, quality or description from wooden frames glazed with putty or fixed with bead all as specified and as directed.

Ditto all as per item No 48 above but from metal frame including punching out or drilling out old glazing pins/spring clips and providing and fixing new all as specified and as directed.

S&F sheet glass ordinary quality 4 mm thick with oil putty not exceeding 0.5 sqm in each pane all as specified and as directed.

Ditto all as per item No 50 above but pin head type.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples all as specified and as directed.

Ditto all as per item No. 52 above but fixed in repair to steel/wooden shutters

S&F butt hinges stainless steel 75mm long all as specified and as directed.

S & F in repairs Continuous (Piano) hinges, stainless bright finished or electro galvanized, width of flaps (When open) 30 mm, all as specified and directed.

S&F aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy 300 mm long and fixed all as specified and as directed.

S&F Floor door stopper of aluminium alloy body double and tongue anodised with rubber shoe and fixed of size 150 mm all as specified and as directed.

S&F aluminium anodised barred tower bolt of extruded section 150mm long and fixed all as specified and as directed.

S&F extruded aluminium alloy handle fabricated type anodised 150 mm long, all as specified and directed.

Ditto all as per item No 59 above but 100mm long.

S&F hasp and staple, safety type aluminium anodised with hinge pin including bolt to hing plate and fixed with screw 125 mm long all as specified and as directed.

M&L for mild steel frame work such as grills with ends of bar shouldered, welded or forged into spikes conforming to Fe 410-0 or Fe 310-0 and taking down old one, all as specified and directed.

M&L for preparing new surfaces of wood of any description over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of pink primer all as specified and as directed.

Ditto all as per item No 63 above but on steel surfaces over red oxide primer. all as specified and directed.

S&F 300 mm long, mild steel ordinary rat rail springs including roller and roller plate complete and taking down old one all as specified and as directed.

S & F of stainless steel curtain rods of dia 20mm and thickness of 1mm including brackets etc as in repairs., all as specified and directed.

M&L for welding in repairs n exc 2.5cm in length n exc 6mm thick all as specified .

M&L for welding in repairs to broken hinges of doors and windows to metal frame all as specified and as directed.

M&L for 18/19 mm thick Ply wood, grade BWR, type BB fixed with screws to timber frame work in partitions and fixed in repairs., all as specified and directed.

S&F Block board, grade 1 quality, exterior grade, commercial type with one side decorative face 18/19mm thick, all as specified and directed.

S&F Pressed steel frames for doors with one or more rebates of size 125 x 60mm including necessary fixing lugs, hinges, lock strike plate, etc., complete, all as specified and directed.

Dismantling boarding, any description, fixed in wall or ceiling, any position with nails,all as specified and directed.

S&F for powder coated aluminum alloy interlocking snap grid 600mm x 600mm consists of Main Tee runners of size 38mm x 25mm x 1.5mm and cross Tee of size 25mm x 25mm x 1.5mm, spaced between the main Tee at 600mm centre to centre to form a grid of 600mm x 600mm and wall angle 25mm x 25mm x 2mm fixed to wall perimetrs at 450mm centres and shall conform to IS 733, IS 1285 with and including hangers of 3mm dia. G.I. (upto 1200mm length and 1200mm centres) adjusting level fixed to roof steel members by means of ceilling cleats made out of G.I. flat 40X3 mm size 60mm long etc complete all as specified and directed .

M&L for 4mm thick non asbestos fibre cement building boards of make 'E Board classic designer board (Cascade or Occenic) of M/S Everest industries Ltd or equivalent as approved, fixed or laid/ inserted to timber/GI/Aluminium framework complete all as specified and directed .

S&F Ceiling Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing.

S&F in repair vitreous china wash basin, white back, size 500 X 400 mm x 190 mm , errecting on existing CI brackets including taking down old one alll as specified and as directed. Note: If the mentioned size is not available in the market , the next immediate higher size shall be provided by the contractor . Make of parryware Code :Flair C0476 or others equvelent in jaquar and Hindware

S&F in in repair vitreous china squatting pan of orrisa pattern, size 580X 440x300 mm white, with integral foot rest 'P' or 'S' trap, including taking down old one complete all as specified and as directed.Make of parryware Code :white C0117 or others equvelent in jaquar and Hindware

S&F in repair 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and taking down old one complete all as specified and as directed

S&F Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern including all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) complete in all respect all as specified.in repairs including seat cover with brass screws and excluding flush pipe and flushing cystren. Make of parryware Code :Flair white C0209 or others equvelent in jaquar and Hindware

S&F in repair PVC water closet seat and cover, black or white, closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device including taking down old one all as specified and as directed. Make of parryware Code :Flair white E8094 Regular or others equvelent in jaquar and Hindware

S & F in repair Soap dish, vitreous China white of approximate size 160 x 160 x 90 mm. Make of parryware Code :T6403A1 or others equvelent in jaquar and Hindware

S&F decorative Towel Ring of chromium plated fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms). Make of parryware Code :T6002A1 or others equvelent in jaquar and Hindware

S&F in repair tubular towel rail, chromium plated 20mm dia, C type, 60cm long between flanges. Make of parryware Code :T6001A1 or others equvelent in jaquar and Hindware

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified

S&F in repairs Angle stop valve of PTMT any colour high pressure screwd for iron pipe and fixed , complete all as specified

S&F in repairs two way Angle cock 15mm bore fancy type chromium (concealed type) all as specified and as directed. Make of essco Code :ORB-105067 or others equvelent in parryware and Hindware

S&F 40mm low density polyethene pipe (LDPE) of pressure rating 6 KgF/Sq.cm fixed complete in wall, floor etc including taking down old one all as specified and as directed.

S&F in repairs 40 mm dia., Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed., all as specified and directed.

S&F GI tubes,40mm dia 'Medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors as in spout in sunken floor, all as specified and directed.

Taking up or down steel tubing 15mm dia and connections, including cleaning for re- fixing or removal to store, all as specified and directed.

Taking up or down steel tubing 20mm dia and connections, including cleaning for re- fixing or removal to store, all as specified and directed.

S&F for 15mm dia tubes, medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floor, all as specified and directed.

S&F for 20mm dia tubes, medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floor, all as specified and directed.

Disconnecting existing tanks, exc 500 n.exc 1000 Ltrs capacity setting aside for repairs, cleaning etc. and hoisting if required reconnectiong and re-fixing in position. all as specified and directed.

Dismantling existing PVC water tanks of capacity exc 500 litres & n.exc 1000 litres all as directed and removed from site. NOTE:- Dismantled water tank shall become the contractors property as per Sch of credit.

S&F 500 litres rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed .

All as per Item No. 97 above but of capacity 1000 ltrs.

S&F Ball brass valve 20 mm dia high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule, all as specified and directed.

S&F 15mm dia Chromium plated fancy type Bib taps cast copper alloy with crutch or butterfly handles screwed down screwed for iron pipe fixed in repair all as specified and directed. Make of essco Code :ORB-105037 or others equvelent in parryware and Hindware

S&F in repairs Brass CP mixer 3 in 1 for mixing hot & cold water screwed down for iron pipe and fixed, all as specified and directed.

S&F bib tap 15mm dia standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm- 125gms).

S&F pillar taps 15mm dia of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-110gms)

S&F nipple 20mm dia suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm- 45gms /25mm- 65gms)

S&F in repairs waste coupling of PTMT 40mm (half or full threaded) sutable for kitchen sink. (Minimum weight 32mm-45 gms / 40mm - 60 gms)

S&F grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms)

S&F in repair Chromium plated shower roses 125 mm dia size with or without swevel joints and size including fixing to steel pipe or union. Make ofessco Code :EOS-542A or others equvelent in parryware and Hindware

S&F shower arm 15 mm size, 195mm long with bend of 45 degree with flange of PTMT any colour.(Minimum weight 40gms

S&F PVC connections 15mm size with PTMT nuts of length 450mm, all as specified and directed.

S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls., all as specified and directed.

S & F 110 mm bore PVC (SWR) bends of any radius.

S & F 110 mm bore PVC (SWR) branch piece single (Single `Y') equal or unequal with access door.

S&F PVC (SWR) pipes single socketed, 75mm dia in any length with rubber ring joints, laid in trenches or in floors, all as specified and directed.

S&F PVC (SWR) bends any radius 75mm bore.

S&F PVC (SWR) multi floor trap 75mm dia with grating including jointing with solvent cement, all as specified and directed.

S&F in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement, all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size mini 815mm x 455mm bowl size 355mm x 355mm x 185mm, all as specified and directed.

Supply and fix syphon kit for low level flushing cistern, all as specified and directed.

M&L for Forming V grooves in plaster n exc 10mm deep and n exc 10mm on face, all as specified and directed.

M&l for GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting and waste, all as specified and directed.

M&l for cutting of existing cracks on wall up to 10 mm deep and n exc 10 mm face and clean the groove properly and fill crack with filler materials with gunating machine up to last edge of crack in two coat and apply tow coat of wall care putty and 2 coat of oil bound distemper., all as specified and directed.

Cleaning and removing all scale and dirt etc. from tanks and from mouths of circulationg pipe, etc. of exc. 500 n.exc. 1000 Ltrs capacity.

Cleaning and removing all scale and dirt etc. from tanks and from mouths of circulationg pipe, etc. of exc. 1000 n.exc. 2000 Ltrs capacity.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, all as specified and directed.

Dismantling of asbestos cement (corrugated semi corrugated) sheets in roof covering all as directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for all as specified and directed.

S&F Rolled Mild Steel Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc confirming to Fe 410 - W (Gde E-250)quality-A,

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed.

Supply and fix Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Taking down carefully existing unserviceable bitumen felt(any number of layers) including plaster of any thickness, wire brushing and cleaning of the surface of roof terraces including flashing and junctions of parapets kerb wall, PCC fillets, benching etc and removing of the rubbish to a distance not exceeding 500 m from the building and depositing where complete all as specified and directed

Demolition of plain cement concrete (unreinforced) in ground floor including concrete at junctions of parapets and roof terraces, flashing kerbs walls, PCC fillets, benching coving of chajjah top/junctions etc complete all as specified

Material and labour for providing plain cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) for roof, kerb, or mud stops, rounded or chamfered on edges etc complete all as specified and as directed.

M&L for rendering 10mm thick CM (1:4) on roof slab top mixed with water proofing liquid finished even and fair without using extra cement complete all as specified.

M&L for cleaning the newly plastered surfaces of concrete (roof etc) with wire brushes and applying water proofing treatment as under :- (i) Applying one coat of oil bound bituminous primer @ 0.25 kg/Sq. M (ii) Providing and laying 3mm thick APP modified water proofing membrane weighing not less than 3.5 Kg/Sqm reinforced with non woven polyester mat weighing not less than 160 gm/Sqm all as specified procured from any one of the approved manufactures (iii) Apply one coat of solar reflective bituminous aluminium paint @ 0.15 kg/Sqm over membrane over non assesble roof surfaces complete all as per manufactures instructions and as directed.

M/S. M. F. Sharif & Co.

M/s IBEX Engineers and Contractors

M/S. YADAV ENTERPRISES

Neha Enterprises

M/s AG PATHAN

AZAD SERVICES

Priyadeep Construction