Renewal Work of Canal Service Road at Bah Main Canal from Km. 0.000 to Km. 0.765

Providing, laying, spreading and compacting stone aggregates 22.4-53 mm of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 KN in stages to proper grade and camber, applying and brooming, stone sceening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per Technical Specification Clause 405. Direction as per Engineer In-Charge.

Providing and applying primer coat with bitumen emulsion (SS-2) on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.75 kg/sqm using mechanical means as per Technical Specification Clause 502 .Direction as per Engineer In-Charge.

Providing and applying tack coat with Bitumen VG-10 using bitumen distributor at the rate of 0.35 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.Direction as per Engineer In-Charge.

Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates and using VG-10 bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of Type C as per Technical Specification Clause 508.Direction as per Engineer In-Charge.

Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per Technical Specification Clause 510Direction as per Engineer In-Charge

Providing & Laying of Hot Applied Thermoplastic Compound 2.50 mm thick with Reflectorising Glass Beads 250 gm per Sqm Area thickness of 2.50 mm is exclusive of surface applied glass beads as per IRC:35-2015 The finished surface to be level,uniform and free from streaks & holes. (as per MORTH -803 (8.13)

Brick edging on both side of the road of M-150 bricks 8cm (3")wide and 12 cm (4-1/2") deep laid with mud mortar including all labour and supply of brick finished to required template & ramming the excavated earth as directed by Engineer-In-Charge.

Providing and fixing of signboard with all letter writing complete.Direction as per Engineer In-Charge

Earth work in embankment by Power Tranported earth with a lead beyond 200m. and upto 1.00 km. Including excavation, loading , unloading & manual compaction, dressing and all lift complete.