Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.8 LAccepted-AOC NH 148 B NEAR BABA GHISARAM FILLING STATION VILLAGE PALI MAHENDERGARH 123029 | MAHENDERGARH | MAHENDERGARH | HARYANA | 123029 | L1 | Accepted-AOC L1 |
Tender Value
₹1.4 L
EMD Value
₹2,805
Closing Date
16 Aug 2021, 5:00 pmClosed
R. Nagender Singh
XEN (E) Rewari
Special Repair of VIP Lounge at Airport _Bachhod_ Narnaul in Distt. Mohindergarh(Pdg. Electrical services only)
2021_HRY_179662_2
PWD/Rewari/July07
Open Tender
Electrical Works
Works
90 days
XEN (E) Rewari
Refer DNIT
2 documents required · 2 mandatory
₹500
₹2,805
3 Nov 2021
6 Aug 2021
17 Aug 2021
6 Aug 2021
16 Aug 2021
6 Aug 2021
Amount
COPPER WIRING IN EXISTING PVC/MS CONDUIT PIPE SURFACE/RECESSEDWiring only in 1.5 sqmm PVC insulated copper conductor cable for LIGHT/FAN/Call bell point in existing conduit pipe and MS boxes including cost of Bakelite cover for MS box, switch, wall socket, ceiling rose/connector etc. Group C
Wiring only in existing conduit and MS box for Twin control light point with 2 nos , 2-ways, 5 amp. switch in 1.5 sqmm FRLS PVC insulated copper conductor cable . Group C
Wiring only in existing conduit and MS Box for Light/Fan/call bell point in 1.5 sqmm FRLS PVC insulated copper conductor cable , without separate control . Group C
Wiring in existing conduit and MS box for 3-pin 5amp. Plug point by using 2no 1.5 sqmm FRLS copper wire and 1 no 1.5 Sqmm FRLS copper wire , including providing 1 no 5/6 Amp 3/5 pin socket and 1 no 5/6 Amp switch etc complete as required. Group C
Wiring in existing conduit system for 3-pin 15amp. Plug point by using 2 no 4 sqmm FRLS copper wire and 1 no 4 Sqmm FRLS copper wire for earthling, including providing 1 no 15/16 Amp 3/6 pin socket and 1 no 15/16Amp switch etc complete as required. Group C
Wiring main and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in existing MS/PVC Conduit etc as required. 1 run of Size 1.50 Sqmm(1/1.40mm)
1 run of Size 6 Sqmm(1/2.80mm)
Supply and erection of MS conduit pipe 1.6 mm thick , ISI marked surface /recessed in slab/wall/ceiling etc. including cost of MS bends, inspection box and all other material required to complete the job in all respect up to the entire satisfaction of Engineer-in-Charge of work. MS Pipe of 20 mm dia.
MS pipe of 25 mm dia.
PVC CONDUIT PIPE ONLY (SURFACE OR RECESSED) FOR ELECTRICAL Supply and erection of PVC CONDUIT ISI marked (Medium) recessed in wall/ ceiling etc. including the cost of PVC bends, inspection boxes, iron hooks and cement concrete etc. complete in all respect up to the entire satisfaction of Engineer-in-Charge of work. MS Pipe of 32 mm dia.
MS pipe of 40 mm dia.
FITTING AND ACCESSORIES. Providing and fixing Piano type accessories of approved make in existing box and Bakelite sheet including fixing and making necessary connections, complete in all respect. Electric buzzer 220/230 volts A.C. Bakelite with double coil.
Bakelite angle/straight button holder large size.
Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects. 1 & 2 Modules including combined plate for Telephone and data
3 Modules
4 Modules
6 Modules
12 Modules
Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. 5 amp 1 way switch
5 amp 2 way switch
15 amp 1 way switch
5 amp Socket
15 amp 6 pin Socket
Bell Push
step type Fan Regulator 2 modules 300 watt
Blanking plate
USB Charger, 1000mA, 5V, 1 Module ( For Non residential use only)
Erection of exhaust fan in existing opening ,complete with necessary earthling of fan including carriage from PWD store to the site of work.
Providing and fixing outdoor duty Ply of 12 mm thick frame suitable for exhaust fan up to 450 mm sweep etc complete as required
Fixing of LED Tube light/ 2*2 ft square panel fitting directly on wall /ceiling or false ceiling including making connections etc as required.
MCCB ,DISTRIBUTION BOARDS, MCB's, RCCB's, CHANGE OVER etc. Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. 4 pole MCCB 6 amp to 100 amp , 25 KA
MCCB Enclosure made of Sheet Steel suitable for mounting MCCB of following ratings. MCCB up to 125 A FP
Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. TPN DB Horizontal type Double Door 4 way ( 8 incoming and 3phase*4 outgoing)
Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- 6 amp. to 32 amp Single Pole
40 amp to 63 amp. MCB's FOUR POLE
SITC Four pole ON LOAD Manual change over switch in SS enclosure of following Ratings. 100 amp 415 volts
MISCELLANEOUS. Supply and fixing Galvanised Iron flexible pipe complete with socket nipples and check nuts etc. at both ends (Up to length of one metre):- Size 20 mm dia
Size 25 mm dia
Supply of GI pipe (B-Class) for suspension rod of ceiling fan including threading if required. 15 mm dia
Providing and fixing fan hook made from 8 mm dia MS rod 75 cm long of required shape and size
Dismantling old wiring points ( Recess wiring or partly recess partly surface system , recess Conduit and box not to be dismanUed ) including necessary repairs to wall etc. Light, fan or call bell Point including circuit/sub main wiring
Wall socket point including circuit/submain wiring
EARTHING AND LIGHTENING ARRESTOR Earthing with GL earth pipe 4.5 m long and 40 mm dia with masonry enclosures on the top etc. (but without charcoal or coke and salt) as required.
Extra for using salt and char coal/coke for pipe earth electrode as required.
Providing and laying earth connections from earth electrode with 4.00 mm dia G.I. wire in 15 mm dia G.I. pipe from earth electrode as required.
Providing and fixing 4.00 mm dia G1. Wire on surface or in recess for loop earthing as required.
Supply and erection of copper lugs including crimping etc. entire satisfaction of Engineer-in- Charge of the work. 1.5 sqmm
Supply and erection of suitable compression type brass cable glands for underground Cable :- 10 sqmm to 16s qmm Cable 2 to 4 Core
25 sqmm to 50 sqmm Cable 2 to 4 Core
Supply and erection of Single Phase weather proof M.S. box of size 20 cm x 15 cm x 10 cm with hinged cover made of 2 mm thick MS sheet, locking arrangements, housed in wall/fixed on pole , including the cost of 1 no 4 way 16 A Bakelite connector, 1 no. 6 amp SP MCB and 1 Nos. 16 amp. neutral links fixed on Bakelite sheet in the M.S. box including painting and necessary connections.
Supply, erection, testing of Ceiling fans IS marked (as per IS code 374) with suitable GI pipe complete in all respects complete as per directions of Engineer-in-charge 48" (1200mm)
Supply and erection of cable on surface/ cable tray etc as required to complete with necessary connections.
Supply and erection of 16 Amp DBOXX SRCD Protected Socket (With Steel Enclosure) for AC as required to complete with necessary connections.
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .