Repair Replacement of leakage seepage from sunken floor plastering GI Pipe and service tank etc in MAP Accn FMC Met Calf Accn ODF 29 Para 6 Para 7 Para 411 801 Bde Mess etc under AGE BR I of GE East Agra

Amount

Taking down cement plaster of any description on brick, concrete, ceiling surfaces etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connection complete all as specified and directed.

All as per item No 2.00 above but 20mm bore

Demolition of cement concrete (unreinforced) in any position and any description including removing the same at location directed by Engr-in-charge complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M&L for rendering 10 mm thick on concrete surfaces of ceiling in cement mortar 1:3 finished surface even and fair complete all as specified and directed

M&L for 10mm thick rendering in CM 1:4 on fair faces of bick wall or concrete surface & finishing the surface even and smoth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick on other than fair faces of brick work on wall in cement mortar 1:6 & finishing the surface even and smoth without using extra cement complete all as specified and directed

M&L for preparation of newly plastered surfaces of walls and applying two coat of cement base paint over a coat of chalk whitening complete all as specified and directed.

M&L for applying three coats of white wash on newly plastered surfaces of wall to match with existing including preparation of surfaces complete all as specified and directed.

M&L for two coats of oil bound distemper on wall surfaces over and including a coat of chalk whitening on newly plastered surfaces walls to match with existing incl preparation of surfaces complete all as specified and directed.

M&L for applying three coats of white wash on newly plastered surfaces of ceiling to match with existing including preparation of surfaces complete all as specified and directed. NOTE FOR ITEM NO 10.00 TO 13.00 :- Prior approval of GE will be obtained in writing on site order book before application of each stage of work i.e. application of primer/ chalk whitening, first coat & second coat & third coat as applicable.

S&F in repair 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and directed.Make:- Modi Guard/ Saint Gobin/Atul

S & F 15mm bore steel water tubing medium grade galvanized including fittings and fixed to walls, ceilings, floors or laid in floors including testing complete all as specified and directed.Make:- TATA/JINDAL/SAIL

All as per item No. 15.00 here-in-before but 20mm bore. Make:- TATA/JINDAL/SAIL

M&L for cutting chases for concealed water tubing n'exc 10 cm girth, pinning in, making good to facings where required and pointing in cement mortar 1:3 complete all as specified and directed.

S&F in repair 10 ltrs capacity PVC flushing cistern low level (white), syphonic action type with inlet ball valve and handle including brackets, rubber bush, washers and flush pipe 32 mm bore complete all as specified and directed.

S&F in repair 500 ltrs capacity rotational moulded polyethylene water storage tank three layered ISI marked, colour white or as approved by GE (cylindrical vertical with closed top) including 20 mm bore ball brass valve high pressure with polythene float and flynut complete hoisted and fixed in position all as specified & directed.Make- Sintex Code CCWS 0050-02-TLW or equivalent of make Tuff/ JS Polyplast

S&F in repair 1000 ltrs capacity rotational moulded polyethylene water storage tank three layered ISI marked, colour white or as approved by GE (cylindrical vertical with closed top) including 20 mm bore ball brass valve high pressure with polythene float and flynut complete hoisted and fixed in position all as specified & directed.Make- Sintex Code CCWS 0100-01-TLW or equivalent of make Tuff/ JS Polyplast

S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified & directed.

S & F in repair 15 mm bore Stop valves, cast copper alloy , fancy type, chromium plated with long shank and cup (Concealed type) screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified & directed.Make- Jaquar/Plumber/Marc

S&F in repair vitreous china wash down water closed pan (Pedestal pattern) with 'P' or 'S' trap including connection to trap and cistern and flush pipe (excl flusingh cistern ) and making good to disturbed surface of floor complete all as specified and directed by Engineer-in-charge.

S &F in repair plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinge device complete all as specified and directed

Supplied and fixed in repair vitreous china WHB white flat back size 550x400mm including Supplied and fixed angle iron brackets, 32 mm dia PTMT waste coupling, complete all as specified & directed.

S & F in repair 15 mm bore angle valves, cast copper alloy , fancy type, chromium plated with long shank and cup (Concealed type) screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified & directed.Make- Jaquar/Plumber/Marc

S & F in repair brass chromium plated tubular towel rail, 20 mm dia, ‘D’ type, 60cm long between flanges complete all as specified and directed.Make- Jaquar/Plumber/Marc

S & F in repair chromium plated grating 100/125mm dia complete all as specified and directed.

S & F in repair 20 mm dia Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe and fixed complete all as specified & directed.

S & F in repair 15 mm bore bib taps, cast copper alloy , fancy type, chromium plated with long shank screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified & directed.Make- Jaquar/Plumber/Marc

M&L for brick work with sub class B bricks, old size straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed

M&L for brick work with sub class ‘B’ bricks, old size straight or curved on plan exc 6 M mean radius, built in CM 1:6 complete all as specified.

M&L for non-skid coloured ceramic jointless tiles (1st quality/premium quality) 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles as in floor over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

Material & labour glazed ceramic coloured tiles of size 400x400x8-10mm thick, as in skirting/dado set and jointed in neat cement slurry and pointed in white/coloured cement to match in floor over and including 10mm thick cement screed bed of CM (1:4) complete all as specified & directed.

Material & labour non-skid coloured ceramic tiles of size 300x300x7-8mm thick, in floor set and jointed in neat cement slurry and pointed in white/coloured cement to match in floor over and including 15mm thick cement screed bed of CM (1:6) complete all as specified & directed.

Material & labour for glazed coloured ceramic tiles of size 300x200x6-7mm thick, on vertical surfaces such as skirting/dado etc, set and jointed in neat cement slurry and pointed in white/ coloured cement to match with existing work over and including 10mm thick rendering in CM 1:4 complete all as specified & directed. NOTE FOR ITEM NO 33.00 TO 36.00:- Colour & design pattern shall be as approved by GE.Make of tiles shall be best quality of Kajaria/ Johnson/Somany

M&L for PCC 1:2:4 type B-0 (using 12.50mm graded stone agg) 25 mm thick for Sub base flooring complete all as specified & directed.

Material & labour for 40mm thick PCC floor with 1:2:4 type B1, (using 20 mm graded stone aggregate) finished even and smooth with using extra cement complete all as specified.

Supply only 38 mm wide and 3 mm thick glass dividing strips as laid in floor complete all as specified.

Material and labour for 50 mm thick cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in path / plinth protection , surface finished even & smooth without using extra cement including forming construction (dummy) joints 12 mm wide & filled with mixture of hot bitumen & sand in the ratio of 1:3 laid in interval of not exc 3 m including change of direction etc complete all as specified and directed.

M & L Granite of 20 mm thick (of any type) work(table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointingin white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl screed bed or bedding in layer of mortar CM (1:4 )10 mm thick etc complete all as specified.

Supply and fix in repairs PVC waste pipes of 40/32mm bore suitable for wash hand basins/sinks complete all as specified & directed.

S&F in repair wall mixture cast copper alloy chromium plated screwed for 15mm dia pipes complete all as specified & directed. Make- Jaquar/Plumber/Marc

Supply & fix in repairs CP Central hole basin mixture screwed for 15 mm dia pipes including PVC connection etc complete all as specified & directed.(Make- Jaquar/Plumber/Marc)

Supply & fix in repairs 15 mm bore bib tap standard of PTMT any colour high pressure screwed for iron pipe complete all as specified and directed. ( Make Prayag/Polytuff/Sintex

S&F in repairs 20 mm dia ball brass valves, high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule complete

S&F in repairs 25 mm dia ball brass valves, high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule complete

Supply & fix in repairs Vitreous China Squatting pan “ORISSA PATTERN” size- 580x440mm white with integral foot rest complete including provn of lime concrete bedding complete all as specified and directed

Supply & fix in repairs sink with drain board made of stainless steel 1mm thick for kitchen with plug, washer and waste pipe including fixing cantilever brackets and connecting union to pipes overall size 915mmx420mm, bowl size 410mmx330mmx160mm complete all as specified and directed.

Supply & fix in repairs PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls of 75 mm bore with necessary fittings complete all as specified and directed .

Supply & fix in repairs pillar taps, fancy type cast copper alloy with capstan heads, chromium plated, screwed down, high pressure with or without lettered “hot” or “cold” with long screwed shanks and fly nut screwed for iron pipe of 15mm bore, complete all as specified & directed.Make- Jaquar/Plumber/Marc

S&F (in repairs) PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls of 110mm bore with necessary fittings complete all as specified & directed

Supply and fix PVC bends 110 mm bore, any radius complete all as specified & directed.

S & F 75 mm bore bends (any radius ) diminishing pieces or tapers (larger bore measured ) etc complete all as specified & directed.

S & F stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75mm bore pipe etc complete all as specified & directed.

S & F stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100mm bore pipe etc complete all as specified & directed.

Supply & fix in repair mild steel helical door spring 300 mm long with roller and roller plates complete all as specified & directed.

S & F in repair mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed in steel frame/wooden and fixed with stainless wire staples all as specified

Material & Labour for external teak wood lipping 6 mm thick & 10 to 20 mm wide fixed with nails on block boards etc as in cupboard shelve kitchen cupboard etc complete all as specified and directed.

S&F in repair 19/20 mm thick block boards, grade 2 quality, interior grade, commercial type fixed with nails to timber frame work as in cupboard shelves, kitchen, cupboards etc complete all as specified and directed.

S&F in repair pre-laminated particle board 19mm thick, interior grade, pre-laminated one side with decorative choice laminations and other side balancing white laminations, fixed with nails/screws to timber frame work as in cupboard/shelves all as specified and directed.

Supply & fix in repair 150 mm size floor door stopper of aluminium alloy body and tongue, anodized including rubber shoed fixed wooden or aluminium frame (door/shutter) complete all as specified & directed.

Supply and fix in repair projecting type hinges for steel window / ventilator complete all as specified and directed.

Supply and fix in repair mild steel handle for steel window /ventilator complete all as specified and directed.

Material & labour for Grit wash(washed stone Grit plaster) shall be provided as per following specifications:- (a) applying Under layer 15mm thick rendering in CM 1:4 on brick or concrete surfaces incl mixed with WPC as per manufacturer's instructions and the surface shall be further roughened by furrowing with a scratching tool. (b) grooves of size 20x15 mm shall be provided to form a design pattern with tapered wooden battens fixed with nails and remove carefully after finishing. (c) applying 15 mm thick grit wash with 15% colour and 85% white 6 to 12mm marble stone chipping incl 35 % white cement and 65% grey cement and mixed with 50% white marble powder of approved quality. (d) before application of top coat,the surface of the under coat shall be cleaned and a coat of cement slurry @ 2 Kg/sqm shall be applied. (e) Finished surface of top coat after initial set shall be scrubbed and washed with suitable brushes and water mixed with H2SO4 @5%. Scrubbing and washing shall be continue till the stone chipping are sufficiently exposed to its natural colour. (f) A sample shall be got approved from GE,before starting the work. (e) Marble stone chipping of size 6 mm to 12 mm of approved colours and marble powder of approved quality.

Material and labour for running welding in repairs, thickness of metal to be welded not exceeding 6mm complete all as specified and directed.

S & F in repair 25 mm PVC coated mettalic fancy type of approved finish curtain including brackets and fancy type, end knobs, rings etc complete all as specified and directed. Make- Monalisa/Marvel

S&F in repairs Brass chromium plated over head shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete as directed and specified.

S & F in repairs Flushing jet for pedestal pattern WC incl. flexible pipe and Brass Chcomium Plated nuts and blots and water pipe of ize 1150 mm long between dia & fixed complete all as specified and directed

S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm vide with chromium plated bracket guard and railing 60cm long complete all as specified and directed

S&F in repair 75mm bore PVC floor traps plain with grating including jointing with solvent cement complete all as specified & directed.

SHRI SAINATH ENGINEERS

SHRI RADHAYSHYAM JHA

m/s shanti consruction co

JWALA ELECTRIC CONTRACTORS

M/s Salim Mohomad

MNR ASSOCIATES