COMPREHENSIVE MAINT FOR FAFA ACCN IN ZONE-II UNDER AGE B/R-III OF GE (SOUTH) MEERUT CANTT

Amount

Taking down chowkats or frames exc 1.5 sq. m but n exc 4 sq m each (without taking off shutters from the frames) Complete all as specified and directed.

Taking down Shuttersof any description exc 1 sq. m and n exc 2 sq. m each and removing to store Complete all as specified and directed.

S&F 2nd class hardwood Plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints. Complete all as specified and directed.

M&L cement concrete type B1 (1:2:4) using 20 mm graded aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, hold fast, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, Complete all as specified and directed.

S&F Fe 290 Gde -E- 165 Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening, hold fast and fixing Complete all as specified and directed.

S&F 30mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides. Complete all as specified and directed.

S&F 2nd class hardwood 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkat Complete all as specified and directed.

S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples Complete all as specified and directed.

S&F 200mm long Aluminium, anodised, barrel tower bolts of extruded section. Complete all as specified and directed.

S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed. Complete all as specified and directed.

S&F aluminium handles 150mm size, cast type, anodised Complete all as specified and directed.

S&F 150mm long overall length of cover plate Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in door. Complete all as specified and directed.

S&F 100mm butt hinges, medium weight cold rold mild steel. Complete all as specified and directed.

Taking down chowkats or frames not exc 1.5 sq. m each (without taking off shutters from the frames) Complete all as specified and directed.

S&F 2nd class hardwood 30mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkat Complete all as specified and directed.

S&F 75mm butt hinges, medium weight cold rold mild steel. Complete all as specified and directed.

S&F aluminium handles 100mm size, cast type, anodised Complete all as specified and directed.

S&F aluminium, anodised, barrel tower bolts 100mm long of extruded section. Complete all as specified and directed.

M&L applying two coats of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of pink primer Complete all as specified and directed.

S&F in repair Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples Complete all as specified and directed.

S&F in repair Aluminium (extruded section body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed Complete all as specified and directed.

S&F in repair 150mm long overall length of cover plate Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in door. Complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for Complete all as specified and directed.

S&F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165.

M&L applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome Complete all as specified and directed.

Taking up or down 15mm bore of pipe steel tubing and connections, including cleaning for re-fixing or removal to store and S & F 15 mm dia GI tubing medium grade with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in CM(1:3) to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth in brick wall Complete all as specified and directed.

Taking up or down 20mm bore of pipe steel tubing and connections, including cleaning for re-fixing or removal to store and S & F 20 mm dia GI tubing medium grade with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed.

S&F in repair Gun-metal, globe or gate valves ISI marked, 20mm bore, with iron wheel head, screwed both end for iron pipe complete all as specified and directed.

S&F in repair CP Bib taps 15 mm bore, fancy type cast copper alloy with crutch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule fancy type Complete all as specified and directed.

S&F in repair CP Pillar taps fancy type 15 mm bore, cast copper alloy, with capstan heads screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks & fly-nuts, screwed for iron pipe Complete all as specified and directed.

S&F in repair wash hand basin Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed Complete all as specified and directed.

S&F in repair Stop valves/angle valve 15 mm bore fancy type, CP with long shank & cup (conncelaed type), cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions Complete all as specified and directed.

S&Fin repair Brass CP wall mixer 3 in 1 for mixing hot & cold water screwed down for iron pipe. Complete all as specified and directed.

M&L for vitrified ceramic tiles light shade 10mm thick (square/rectangular) polished area of each tiles nexc 0.36 sqm as in floors set and joined in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and Including 15mm thick CM 1:6 screed bed or bedding layer of mortar for laying floor finishes incl dismantling of floor tiles. Complete all as specified and directed

M&L for vetrified ceramic tiles light shade 10mm thick (square/rectangular) polished area of each tiles nexc 0.36 sqm in skirting/dado set and joined in neat cement slurry and pointed in white or .coloured cement to match the shade of tile laid over and Including 10mm thick rendering in cement mortas 1:4 Including dismantling of wall tiles. Complete all as specified and directed

M&L for Coloured Non Skid ceramic tiles 7mm to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over & Including 15mm thick screed in CM(1:6) Including dismantling of tiles. Complete all as specified and directed.

M&L for Coloured Glazed ceramic tiles in vertical surfaces 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over & Including 10mm thick plaster in CM(1:4) on fair face of brick or concrete surface including dismanting of tiles. Complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers & waste; including bedding in CM 1:4 to dwarf wall or including fixing cantilever brackets & connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm Complete all as specified and directed.

S&F in repair Vitreous China wash basin, white/coloured, flat back, size 550x400mm excluding taps, waste chain & plug & porcelain stopper but including brackets Complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern & flush pipe) Including seat cover. Complete all as specified and directed.

S&F in repair Plastic water closet seat, black/white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device Complete all as specified and directed.

S&F in repair vitreous china squatting pan ' Orissa pattern' size 580 x 440 mm, white with integral foot rest (excluding flushing cistern and flush pipe) with cast iron ' P ' trap and including connecting to trap and flushing pipe, anti syphonage pipe etc complete & including making good to floor complete all as specified and directed.

Supply and fixing in repair PVC valveless, syphonic action type, flushing cistern, 10 ltr capacity, low level, white, with inlet, ball valve, float and handle including brackets and PVC bend including connection to IWC/EWC and fixing on wall with brackets Complete all as specified and directed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 600mm Complete all as specified and directed.

S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connection and fixed in position Complete all as specified and directed.

S&F in repair 125mm size brass chromium plated shower rose with or without swivel joints any size including fixing to steel pipe or union. Complete all as specified and directed.

S&F in repair 20mm dia tubular towel rail , brass, chromium plated, fancy type, min 60 cm long between flanges fixed with and including CP brass screws, rawl plug etc Complete all as specified and directed.

Supply and fixing in repair 20 mm dia stainless steel curtain rods with wall thickness 1 mm including bracket holding and knob on ends. Complete all as specified and directed.

S&F in repair 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement. Complete all as specified and directed.

S&F in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement Complete all as specified and directed.

S&F in repair toilet paper holder, brass chromium plated, fixed to walls with chromium plated brass screws. Complete all as specified and directed.

S&F in repair soap dish, chromium plated, fixed to plugs with chromium plated brass screws. Complete all as specified and directed.

S&F in repair 40mm bore unplasticised PVC pipe of pressure rating 10 kg/Sqcm fixed complete to walls, ceiling or laid in floors complete all as specified and directed.

S&F in repairs 32mm bore unplasticised PVC pipe of pressure rating 10 kg/Sqcm fixed complete to walls, ceiling or laid in floors complete all as specified and directed.

S& in repair stainless steel kitchen plate rack of thickness nexc 1 mm thick (18 gauge) and size nexc 1.00sqm. complete all as specified and directed.

Dismantling of Stone slabs & tiles of any description or thickness in floors, aprons etc. Laid, bedded & pointed in any mortar Complete all as specified and directed.

M&L 18mm to 20mm thick Granite (of any tpe) work (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms and like in CM(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over & Including 15 mm thick Screed bed in CM (1:6) Complete all as specified and directed.

S&F Sheet glass 3.0mm thick, ordinary quality & glazing with oil putty/wooden beadding in square n exc 0.5 sq.m in each pane including hacking out old broken glass (any thicknesss, size,quality or description) from metal/wooden frame inlcuding punching or drilling out old glazing pins/spring clips & providing & fixing new ones Complete all as specified and directed.

S&F Sheet glass 3.0mm thick, ordinary quality & glazing with oil putty/wooden beadding in square n exc 0.5 sq.m in each pane Complete all as specified and directed.

S&F Sheet glass 3.0mm thick, figured glass, pin head type and glazing with oil putty/wooden beadding in square n exc 0.5 sq.m in each pane Complete all as specified and directed.

S&F in repair Sheet glass 3.0mm thick, figured glass, pin head type and glazing with oil putty/wooden beadding in square n exc 0.5 sq.m in each pane including hacking out old broken glass (any thicknesss, size,quality or description) from metal/wooden frame inlcuding punching or drilling out old glazing pins/spring clips & providing & fixing new ones Complete all as specified and directed.

S&F in repair 18/19 mm thick Prelaminated particle board, interior grade, prelaminated both side deocrative choice lamination fixed with screws to timber frame work as in kitchen cabinet, almirah & shelves incl butt hinges, hasp & staple aluminium handles, aluminium tower bolt, knob as per site requirement and complete all as specified and directed.

S&F in repair auto hinges for cabinet case Complete all as specified and directed.

S&F in repair stainless steel plain basket of size 17"x20"x6". Complete all as specified and directed.

S&F in repair stainless steel partion of size 17"x20"x6". Complete all as specified and directed.

S&F in repair stainless steel cutlery of size 17"x20"x6". Complete all as specified and directed.

S&F in repair stainless steel grain trolly with stand of size 21"x17"x10". Complete all as specified and directed.

S&F in repair stainless steel plate basket of size 17"x20"x6". Complete all as specified and directed.

S&F in repair 20" long telescopic sider to facilitate drawer slide on steel ball bearing fixed with steel screws. Complete all as specified and directed.

S&F in repair 150mm size stainless steel bright finish handle for cabinet shutter. Complete all as specified and directed.

S&F in repair PVC (SWR) pipes 75mm bore double socketed in any length with rubber ring joints fixed to walls Complete all as specified and directed.

S&F in repair PVC (SWR) pipes 110mm bore double socketed in any length with rubber ring joints fixed to walls Complete all as specified and directed.

S&F in repair PVC (SWR) bends any radius 75mm dia Complete all as specified and directed.

S&F in repair PVC (SWR) bends any radius 110mm dia Complete all as specified and directed.

S&F in repair PVC (SWR) branch piece, single (single Y) equal or unequal 75mm dia Complete all as specified and directed.

S&F in repair PVC (SWR) branch piece, single (single Y) equal or unequal 110mm dia Complete all as specified and directed.

S&F in repair Stack clamps out of 25mm by 5mm flat iron & 16mm dia round iron stays. Including bolts & nuts & securing ends of stays to wall or roof for 75 mm bore pipe Complete all as specified and directed.

S&F in repair Stack clamps out of 25mm by 5mm flat iron & 16mm dia round iron stays. Including bolts & nuts & securing ends of stays to wall or roof for 100 mm bore pipe Complete all as specified and directed.

Disconnecting existing tanks, not exc 500 litres capacity, setting aside (or lowering if required) for repairs, cleaning, etc. & hositing if required reconnecting & re-fixing in position and incl Cleaning and removing all scale and dirt etc: from the tanks and from mouth of circulating pipes etc complete and finally washing the tanks with clean water and bringing the tank to a position for storing clean water and bringing the tank to a position for storing the clean water. Complete all as specified and directed. Note:- (i) The tank is to be cleaned through Alum and bleaching powder solution. (ii) The wire brush is to be used for cleaning of water tank.

Disconnecting existing tanks, Exceding 500 litres but not Exceding 1000 litres capacity, setting aside (or lowering if required) for repairs, cleaning, etc. & hositing if required reconnecting & re-fixing in position and incl Cleaning and removing all scale and dirt etc: from the tanks and from mouth of circulating pipes etc complete and finally washing the tanks with clean water and bringing the tank to a position for storing clean water. Complete all as specified and directed. Note:- (i) The tank is to be cleaned through Alum and bleaching powder solution. (ii) The wire brush is to be used for cleaning of water tank.

Dismantling of water and removing to store capacity 500 litres and S&F 500 litres rotational mouded polyethylene three layer water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I incl 20mm bore ball brass valves, high pressure with polythene float and flynut complete screwed for iron pipe/PPR pipe or brass ferrule and fixed.Complete all as specified and directed.

Dismantling of water and removing to store capacity 1000 litres and S&F 1000 litres rotational mouded polyethylene three layer water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I incl 20mm bore ball brass valves, high pressure with polythene float and flynut complete screwed for iron pipe/PPR pipe or brass ferrule and fixed.Complete all as specified and directed.

S&F in repair PVC covers of PVC/ HDPE water tank suitable for 500 & 1000 ltrs capacity including all necessary locking arrangement complete all as specified and directed.

S&F in repair 20mm bore ball brass valves, high pressure with polythene float and flynut complete screwed for iron pipe/PPR pipe or brass ferrule and fixed.Complete all as specified and directed.

Demolition of brick work or stone boulder masonry, built in cement mortar, including all quoins, arches, pillars etc but excluding ashlar, facings, dressed stone work and precast concrete incl M&L brick work with sub-class 'B' bricks, straight or curved on plan exc 6m mean raidus built in CM 1:6. Complete all as specified and directed.

S&F in repair transparent 6.30mm thick glass corner shelf of size 250mm radius, complete with CP grill, bracings/brackets and screws etc. Complete all as specified and directed.

Supply & fix in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long Complete all as specified and directed.

S&F in repair grating 75/100/125 mm dia of ,steel chromium plated with or without hole as required complete all as specified and directed.

Resecuring or easying and adjusting without taking down shutters of any description(door/window) exe 1 sq.m but n exe 2.0 sqm each Complete all as specified and directed.

Resecuring or easying and adjusting without taking down shutters of any description(door/window) not exe 1.0 sqm each Complete all as specified and directed.

Welding in repairs exc 2.5 cm & n exc 5 cm in length & thickness of metal n.exc 6 mm Complete all as specified and directed.

Taking down cement or cement lime plaster of any description including racking out joints, hacking for keys ,scrubbing down with water etc complete all as specified and directed.

Material and labour for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished fair and even as in wall complete all as specified and directed.

Material and labour for rendering 15 mm thick using ready mix plaster bags on brick work or concrete surfaces, finished surface even and smooth as in wall complete all as specified and directed.

M&L Rendering 5 mm thick in cement mortar (1:3), on fair faces of concrete surfaces, finished even and smooth, over and including fixing of chicken wiremesh with nails and set with cement slurry and paste before plastering on ceiling complete all as specified & directed.

Preparation of New plastered or unplastered surfaces of ceiling and applying two coat of white wash complete all as specified and directed.

M&L for preparing new plastered or un-plastered surfaces of walls & applying of wall putty 1.5 to 2 mm thick on existing prepared surface for smooth finishing and applying two coats of oil emulsion distemper over a coat of suitable primering as a base course as per manufacturer's instructions with using roller complete all as specified and directed.

M&L for preparing new plastered or un-plastered surfaces of walls & applying 1.5 to 2 mm thick wall putty on existing prepared surface for smooth finishing and applying two coats of weather proof exterior emulsion paint silicon based over a coat of water based suitable primering as a base course as per manufacturer's instructions with using roller complete all as specified and directed.

M&L for prepration of old surfaces (Plastered or unplasterd surfaces) of ceiling and applying one coat of white (Lime) wash on ceiling complete all as specified.

M&L for preparation, removing/scrapping down existing surface where ever necessary of old plastered or unplastered surfaces of walls/ceiling/soffits etc and applying two coat (finished coat) of oil bound distemper (OBD) white or tinted to achieve desired surface finish as directed, including removing existing nails, if any, any Nos and filling the disturbed /uneven surface, holes/voids with wall care putty/POP/white cement where ever necessary to achive the smooth surface complete all as specified and as directed.

M&L for preparation of plastered/unplastered wall surfaces and applying two coat of exterior acrylic emulsion paint (finished coat), including removing existing nails, if any, any Nos and filling the disturbed /uneven surface, holes/voids with wall care putty/POP/white cement where ever necessary to achive the smooth surface, complete all as specified and as directed.

Dismantling /Taking down and removing existing roof treatment over roof slab including taking down existing PCC padding or plaster and hacking the top of RCC slab complete and Roughening surfaces of old concrete floor / roof by picking, sweeping clean and washing down with water to removedust,etc and disposal of rubbish off the premises complete all as specified and directed

M&L 20 mm thick screed bed in CM 1:4 on roof surfaces mixing with water proofing compound @ 200ml/per bag of cement content or as per manufacurer's Instructions Complete all as specified and dirtected. (Note:- water proofing compound shall be paid separately).

Supply only liquid water proofing compound. Complete all as specified and directed.

M&L for cleaning of concrete or plastered surfaces of roof and providing water proofing treatment with polymeric standard water proofing membrane, complete all as specified and described as under :- (a) Preparation of surface and applying one tack coat of polymeric modified bitumen 85/25 @ 1.2 Kg/Sqm over a priming coat of cold bituminous primer @ 0.30 kg / sqm. (b) Supply & providing APP modified polymeric water proofing membrane 3 mm thick of weight not less than 3.60 kg / sqm reinforced with polyester non-woven fabric (weight not less than 160 gms/Sqm) centre core including coating the surface with the compatible primer and torch application of membrane with minimum 10 cm overlaps in sides and 150mm overlaps in end as required thereof, complete all as specified and directed. (c) Applying one more coat of polymeric modified bitumen 85/25 @ 1.2 Kg/Sqm over which one coat of aluminium bituminous paint @ 0.20 Kg/Sqm shall be applied. Note:- The work of water proofing treatment shall be got executed throughh expert team of manufacturers or authorised applicator of manufacturer.

M&L for prepration of old wooden surfaces of any description not otherwise described over 10 cm width or grith and applying one coat of synthetic enamel paint Complete all as specified and directed.

M&L for prepration of old steel/iron surfaces of any description not otherwise described over 10 cm width or grith and applying one coat of synthetic enamel paint complete all as specified.

Demolition of cement Concrete of any description and in any position not otherwise specifically provided for Complete all as specified and directed.

M&L cement concrete type B-1 1:2:4 (using 20mm graded aggregate) as in roof kerbs, chajjas kerbs, bldg projection kerbs or mud stops, rounded or chamfered on edges upto any height of bldg. Complete all as specified and directed.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) Complete all as specified and directed.

M&L 75mm thick PCC 1:3:6 type C-2 (using 40mm graded agg) as in sub-base. Complete all as specified and directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;

Providing, cement concrete type B-1, 1:2:4 (20mm graded agg) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, Complete all as specified and directed.

M&L Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigments. Complete all as specified and directed.

M&L75mm thick Cement concrete type C- 2, 1:3:6 (40mm graded aggregate) as in plinth protection. Complete all as specified and directed.

Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound type A. Complete all as specified and directed.

M&L for cutting and completely removing of bushes, small trees, vegetation (Peepal, small plants etc) growth alongwith its roots on building wall/roof/chhajja/parapet wall/water tank staging area etc or like of any dia and girth at any height by necessary demolition of brick, concrete, plaster portion if required and filling holes on and making good disturbed surfaces to match with existing surface with cement mortar 1:4 with and including WPC and PCC 1:2:4 as per site requirement, complete all as specified and directed.

M&L Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigments and incl 15mm thick CM 1:6 screed bed or bedding layer of mortar for laying floor finishes incl dismantling of floor tiles. Complete all as specified and directed

ATHARV CONSTRUCTION (BID ID -3411658)