PROVN OF MECHANISED LAUNDRY, TOILET IN COMPLEX AND PARKING SHED AT 10 AFH UNDER GE (AF) HASIMARA

Amount

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation, etc and getting out in soft/loose soil complete all as specified and directed.

M & L for Cement concrete 1:4:8, type D-2 (using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

Demolition of brick work or stone / boulder masonry, built in cement mortar including all quoins, pillars etc stacking the serviceable bricks after removing mortar and cleaning for re-use and disposal of debris and rubbish to a distance n.exc 100m as directed by the Engr-in-Charge.

M & L for Cutting out bricks, forming toothing for, and bonding new into old work including value of new materials entering old walls and jointing and pointing in cement mortar 1:4 (measured on vertical face in contact with old wall only complete all as specified and directed.

M & L for Brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 including provision of 02 Nos 8mm TMT bars at every fourth course, complete all as specified and directed.

M & L for Brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm as in soft/loose soil complete all as specified and directed.

Removing excavated material not exc. 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed.

M & L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M & L for 75 mm thick, Cement concrete 1:4:8, type D-2 (using 40mm graded crushed stone aggregate) as in sub base of flooring etc, and finished the cement concrete surfaces even and fair without using extra cement complete all as specified and directed.

M & L for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished the surfaces even and fair without using extra cement complete all as specified and directed.

M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4, mixed with liquid water proofing compound with weight of cement as per manufacturer's instructions and finished the surface even and smooth without using extra cement complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item).

Supply only liquid water proofing compound (ISI marked) complete all as specified and directed.

M & L for use & waste Form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. for flat rough finished surfaces of concrete complete all as specified and directed.

S & F TMT steel bars 10 mm dia and over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed.

All as per item no 16 above but 5mm dia and over upto & including 10mm dia as in stirrups, spacers and binders complete all as specified and directed.

M & L for Reinforced Cement Concrete 1:1.5:3, Type A-1 (Nominal Mix) (Using 20 mm graded crushed stone aggregate) as in beams, cantilevers, bressumers, lintels over 1.5m span etc complete all as specified and directed. (Note : Reinforcement shall be measured & paid seperately)

M & L for 40 mm thick, plain cement concrete 1:2:4, type B-0 (using 12.5 mm graded crushed stone aggregate) as in damp proof course mixed with liquid water proofing compound with weight of cement as per manufacturer's instructions to horizontal or vertical surfaces including necessary formwork complete all as specified and directed.

M & L for Hardcore of gauge n exc. 63 mm, broken stone or boulders,deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M & L for 75 mm thick, plain cement concrete 1:3:6, type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection etc, finishing cement concrete surface even and smooth without using extra cement including making joints with bitumastic filing in proportion of bitumen and sand 1:2 complete all as specified and directed.

M & L for joint free non-skid, ceramic, coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm, in floors etc, including 15 mm thick screed bed in cement mortor 1:6 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

M & L for glazed, coloured, ceramic, tiles of size (350mm x 250 mm/450mm x 350mm/300mmx450mm) x 6 to 7 mm thick, on vertical surfaces such as skirting, dados etc, including 10 mm thick bedding in cement mortor 1:4 and set & jointed in neat cement slurry & pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

M & L for Granite (of any type) tiles as in floor, 18 to 20 mm thick, machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including 15 mm thick screed bed in cement mortor 1:6 & cutting, polishing complete all as specified and directed.

S & F 20 mm bore, gun metal globe or gate valve with iron wheel head screwed both ends for iron pipes and fixed complete all as specified and directed.

Supply, laying, connection and testing, 20mm bore, Steel water tubing, galvanised, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors, etc complete all as specified and directed.

Supply, laying, connection and testing, 15mm bore, Steel water tubing, galvanised, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors, etc complete all as specified and directed.

S & F 15mm bore, concealed Steel water tubing, galvanised, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors and making good surfaces with cement morter 1:3 exc 10 cm girth, complete all as specified and directed.

M & L for 15mm bore, Lagging to pipes used in internal water supply or plumbing all round with, 25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842 complete all as specified and directed.

S & F ceramic china, table top wash hand basin, size 530x350x130mm(placed over platform like granite/marble) including PVC waste pipe 32mm dia, waste coupling and cutting hole on platform as required complete all as specified and directed. (Make: Prayag Cat No 4707 or equivalent)

S & F 15mm bore, PVC connection pipe 450mm long with PTMT nuts at both ends complete all as specified and directed.

M & L for 40mm bore HDPE pressure pipe of rating 6 Kg/cm2 fixed to wall, ceiling or laid in floors etc. complete all as specified and directed.

S & F 15mm bore, bib taps, fancy type, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F 15 mm bore, two way, angular stop cock, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F 15 mm bore, angular stop cock, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F swan neck, fancy type, basin mixer, swing spout, chromium plated with waste system with connection pipe , 15mm bore and fixed complete all as specified and directed.

S & F soap dish, stainless steel, fixed in walls with plugs & screws complete all as specified and directed.

S & F toilet paper holder,stainless steel fixed to wall with screws complete all as specified and directed.

S & F 20 mm bore, brass chromium plated, tubular towel rail, D type, 60 cm long between flanges with brackets complete all as specified and directed.

S & F Towel Ring of brass chromium plated fixed to wall and including Chromium plated brass screws and wooden/plastic cleats etc complete all as specified and directed. (Make: ESSCO Cat No. AEC-1121 or equivelant of make as per list of manufacturer)

S & F 15 mm bore, health faucet ABS body with wall hook and 1 m long SS braided rubber hose pipe with all accessories complete all as specified and directed. (Make: Cera Cat No. CG-106 or equivelant of approved make)

S & F Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed.

S & F vitreous china wash down water closet pan (pedestal pattern), white, including connection to outgoing drain and flushing pipe, anti syphonic pipe with seat and cover complete but excluding flushing cistern & flush pipe including making good damaged/disturbed surfaces complete all as specified and directed.

S & F plastic water closet, Seat and Cover for pedestal pan, white / black, closed pattern with flat bottom and mild steel chromium plated or aluminium hinging device complete all as specified and directed.

S & F vitreous china bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement complete all as specified and directed.

S & F in repair Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed.

S & F Steel ventilators, with top hung shutter including hinges, steel peg stay complete complete all as specified and directed.

S & F mild steel bands, straps, supports or stays of rain water, ventilating pipes including bolts, hooks (stay) for large gates, hook and pintel hinges, clamps, hold fasts, wall ties,flat iron fillets for securing wire mesh, wind tie, fan hook and similar work including necessary drilling bolting or riveting etc conforming to Fe – 290 Gde E – 165 complete all as specified and as directed.

S & F 3 mm thick, figured glass, pin headed type, in square n.exc 0.5 Sqm in each pane complete all as specified and as directed.

M & L for Mild steel framed work such as grills, gratings, gates etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bar, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-410-0 Gde E-250 complete all as specified and directed.

S & F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S & F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with printed sheet, complete all as specified and directed.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both side Prelam PVC sheet used instead of plain colour PVC sheets. Stile and rails, feathered at edges for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of both side Prelam PVC sheet used instead of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable Prelam PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and directed.

S & F 150 mm long, aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S & F 100 mm size, extruded aluminium handles, fabricated type, anodised complete all as specified and directed.

S & F 75 mm size, butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S & F 110 mm bore, PVC (SWR) bends of any radius complete all as specified and directed.

S & F 110 mm bore, PVC (SWR), Soil waste and vent pipes in any length with or without ears, with cement joints fixed to wall, etc with all necessary fixing arrangement complete all as specified and directed.

S & F 110 mm bore, PVC (SWR), Soil, waste and vent pipes, single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and directed.

S & F 110 mm bore, PVC (SWR) vent cowl complete all as specified and directed.

S & F 110mm bore, PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S & F 75 mm bore, PVC (SWR) floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

S & F 75 mm bore, PVC (SWR), Soil waste and vent pipes in any length with or without ears, with cement joints fixed to wall/floor etc with all necessary fixing arrangement complete all as specified and directed.

S & F 75 mm bore, PVC (SWR) bends of any radius complete all as specified and directed.

S & F 75mm bore, PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S & F Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100mm bore pipe complete all as specified and directed.

S & F Pre-Painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as per manufacturer's instruction complete all as specified and directed.

S & F Pre-Painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges/vally gutter, fixed with self tapping screws as per manufacturer's instruction complete all as specified and directed.

M & L for mild steel work as in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.

S & F 4mm thick non asbestos fibre reinforced designer ceiling board (610mmx610mm) with hot drip heavy duty suspended ceiling grid system T-2430 with GI frame work for seamless ceiling comprising of GI perimeter channel, unequal flanges and web etc of suitable size suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section including Hangers 6 mm dia GI fixed to roof by means of ceilling cleats made out of GI flat per manufacturers instructions complete all as specified and directed by the Engr-in-Charge.

S & F Rolled mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed by the Engr-in-Charge.

S & F Rolled mild steel sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc. complete all as specified and directed by the Engr-in-Charge.

S & F Mild steel screw bolts, 11 to 15mm dia(machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt n exc 5cm long complete all as specified and directed

M & L for preparation of newly steel & iron surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M & L for preparing newly plastered surfaces of walls etc and applying two coats of distemper oil emulsion over a coat of alkali resistant primer complete all as specified and directed.

M & L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed.

M & L for preparing newly plastered surfaces of walls, etc and applying three coats of white wash complete all as specified and directed.

M & L for 150mm bore,Salt-glazed stoneware drain pipes laid in trenches and jointed as specified including cement concrete bedding in PCC 1:4:8 type D-2, bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; complete all as specified and directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching for 100mm dia of pipe as required complete all as specified and directed.

Supply, Install, testing and commisioning of Hydro extractor machine 15 Kg fully automatic, electric driven and Integral electric heated, Industrial washer cum extractor, suitable for running on 3 Phase 415 Volts 50 Hz, including all necessary accessories and components, mounted on self supporting Rust proof frame with not less than 2 mm thick stainless steel body and all components of rust proof materials duly compatible for climatic conditions at Hasimara .The machine shall be soft mounted and operatable to apply a minimum G force of 300G and with following features complete all as specified and directed:- Make:- Electrolux /Stefab/Fab care Fagor/Unimac. (a) Washer cylinder : - For washing, cleaning and extraction Capacity -15 kg/cycle, complete Electric driven and heated, front loading, Heavy duty, Heavy-duty hot dip galvanized section frame, heavy-duty rear gable and bearing support. Both the inner and outer wash cylinders shall be constructed entirely using 2.0 mm thick stainless steel grade 304. (b)Control - The machine shall be controlled with a fully programmable micro computer and should be able to capture features of a customised process.It shall have an LCD touch interface with customised and user operatable general wash settings. It shall be user friendly for editing/erasing preset programmes. The minimum preset programmes shall be 30 nos. (c)Detergent supply :- The machines shall be available for use with powder or liquid detergents automatically fed via integrated detergent dispensers with minimum 4.0 compartments without user intervention. (d)Out of balance detection: The out of balance shall be determined electronically and based on the out of balance, the machine shall be able to determine the maximum allowable speed for extraction 300G or more. (e)Safety features:- All machines shall be equipped with necessary safety-interlock and warnings on the loading door.(f) Auto weighing:- Automatic linen weighing system for automatic adjustment of water and soap consumptions as well as energy savings, according to the load inserted, measured automatically by the washer).(g)Drive system:- The machine shall have a motor powered by a VVVF drive.There shall be no gearboxes, clutches or drive reducers.(h) Electrical requirements: The machine shall be available in 415 Volts AC 03 phase configuration and have integrated circuit protection devices.(j) Serviceability : Major control components shall be fitted with multi-position quick-connect connectors for quick and easy servicing. (k) Door Opening – not less than 415 mm Ø (l) Extraction speed - not less than 905-980 rpm with modifiable water levels and washing speed. (m) Extraction Force - 301- 354 G or more.

Suppy, install testing and commisoning of Fully automatic Industrial Tumble Dryer 15 Kg linen Capacity Electric driven and Electric heated, with integrated heating assembly, suitable for running on 3 Phase 415 Volts 50 Hz, incl all necessary accessories and components, mounted on self supporting Rust proof frame with complete stainless steel body not less than 2.0 mm thick and all components of rust proof materials duly compatible for climatic conditions with following features complete all as specified and directed:- Make:- Electrolux /Stefab/Fab care Fagor/Unimac. (a) DRYING TUMBLER:- Capacity – 15 kg Integral Electric heated, electric vented, Heavy duty, Front Loading, Cool down Feature, Auto-timed, Auto/manually-reversible dual Motor drive, Open Pocket & Front display. The dryer should be with temperature control system and the drum suspension should have sealed self-lubricated bearings. (b) Control: – Microcomputer with adjustable parameters such as temperature, programmes and cool down time and also the feature to control the residual moisture control in the linen. Temperature and time Controller shall be Auto digital control with software for minimization of the cost and maximization of the uptime of the equipment. The process shall be through a fully programmable micro computer with LCD touch interface, which shallbe able to capture features of a customised process and the drying programme shall be user friendly for editing/erasing preset programmes. The minimum preset programmes shall be 10 nos. (c) Drum–Inner and outer drum should be made of Stainless steel AISI-304, 2 mm thick. The drum should be fitted with 4 lifters.(d) Safety features: The tumble dryer should be equipped with overheating protection and a temperature sensor that turns off the heat if the airflow is clogged.(e) Door Lock: The dryer should have a safety function or feature , which means the dryer should stops in case the door is opened during operation.(f) Transmission: The transmission should have pulley and belt or direct drive. There should be no Gearboxes ,clutches or gear reducers and the motor shall have VVVF drive.(g) Door - Made of die pressed Stainless steel AISI 304 quality n.less than 2mm thick, Toughened glass window , SS door latch/handle and interlock for safety.(h) Door Opening - 500 mm Ø (Minimum) (j) Basket Volume - 301 Ltrs.(Minimum) (k) Suction Blower- Heavy duty Centrifugal Suction Blower and dynamically balanced. (l) Lint Screen - Self cleaning lint screen, facility of cleaning should be through front door (m) Airflow Vent:- The complete airflow system should be thermally Insulated to facilitate convinient working temperatures. Rate shall include provision for ducting to vent the steam out of the laundry room with suitable MS ducting with thermal insulation as per manufacturers recommendation.(n) Electric supply–415V, 3Ø, AC, 50hz.

Suppy, install testing and commisioning Vaccum finising table utility shape for general purpose, with integral vacuum fan and steam electric iron and integral boiler,AC, 3PHASE, 380-415V with Rectangular Vaccum Ironing Table Dimensions -1200mm (width)X 750 mm(depth) with following parameters complete all as specified and directed. Make:- Electrolux /Stefab/ Fagor/Unimac.:- (a) Power Consumption not more than 6000 Watts (b) Garment Tray with Heated Surface and adjustment of surface temperature (c) Vacuum function should be integratde in the table. (d) Rectangular shape of the Ironing table for large working area. (e) White Double density polyester foam padding for better life (f) Integral steam boiler for better safety (g) Iron balancer equipped with the machine. (h) Special feature of overhead gantry to support hoses (j) Electric supply 3 Phase 380-415 V AC 50 Hz.

Suppy, install testing and commisoning Utility Dry Work Press Air operated, auto timed, auto temperature controlled, double switch operation with built in suction blower and integral built in boiler connected with external compressor (installed separately), polished stainless steel head, control placed on front with push button for raising and lowering head, with following minimum features/parameters, complete all as specified and directed(Dimensions -1500 mm (width)X 750mm(depth) :- Make:- Electrolux /Stefab/Fab care Fagor/Unimac. (a) Adjustable head pressure.(b) Rugged steel frame (c) Foot pedal, manual (d) Hand guard (e) Pressing strength adjustment (f) Repositionable pedal (g) Electric supply-3 Phase 380-415 V AC 50 Hz.

Suppying, installing, testing and commisoning Electric operated reciprocating Air compressor machine of follwing specifications complete all as specified and directed:- Make:ELGI / INGERSOLLRAND/KIRLOSKAR PNEUMATICS/ ATLAS. (a) Reciprocating .Air compressor with pressure 145 PSIG (10KG/CM>2). (b) Tank capacity – 100 ltrs (c) Electric motor not less than 2 HP wth all the safety features (d) The air compressor shall be of reputed make, with adequate life, and requiring minimum maintenance.(e) No of cyliders -1, single stage.(f) Disharge: 9.99CFM(100 LPM) (g) Designed for continuous duty with efficient cooling even under high ambient temperatures. (h) Fitted with all standard accessories like Pressure relief valve, pressure gauges oil sight glass & oil drain,valve inlet airlifter etc.

M & L for following Air /Water lines for connection from source to individual machines like washer extractor, drier, flat bed press, ironing table, compressor, spotting table, softening plant with standard size pipe lines/cables as per manufacturers recommendations for efficient functioning of the equipments complete all as specified and directed:- (a) Water pipeline from source to individual machines using CPVC pipe of required size (ISI Marked) and of approved make of as per requirement of plant with required fittings all as specified and as per directions of Enginneer In charge . (b) Air pipeline from source to individual machines using MS pipe (Heavy duty) pre painted of required size, (ISI Marked) and of approved make of as per requirement of plant with required fittings all as specified and as per directions of Enginneer In charge .

Supply, installation, testing and commissioning of steam Generator ,Electric operated,automatic with steam capacity 4kg/hr complete all specified and directed . Make:- Electrolux /Stefab/Fab care Fagor/Unimac.

M & L for Point wiring with 1.5 Sqmm (nominal area), FRLS PVC insulated, multistranded, single core, unsheathed, copper conductor cables drawn through and including PVC rigid conduit /casing capping with all fittings and accessories (like Tee, bend etc.) complete fixed to walls/ceiling etc. with and including 1.5 Sqmm (nominal area) FRLS PVC insulated, unsheathed, stranded, single core, copper cable green in colour as in earth continuity wire connecting to common earth point including concealed pressed steel terminal box of required size factory made with top cover of ISI marked plastic laminated sheet of required colour for mounting switches, sockets, regulators etc complete for one light/fan point controlled by one, one way switches including cutting chases and making good the disturbed surface to match with the existing complete all as specified and directed by the Engr-in-Charge.

S & F switch piano, 5 Amp single pole, flush type one way 230 volts complete all as specified and as directed.

S & F Ceiling rose, 3 terminal, PVC/polycarbonate, isolated body complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. Make: HPL /Crompton / Wipro/Havells/Jaquar Note: An amount of Rs. 200.00 on account of credit schedule for schedule 'A' part - II shall be deducted from the total amount of BOQ to arrive at the contract sum. .

M/S I P GROUP

M/S. VINITA CONSTRUCTION

MAJUMDER ENTERPRISE

M/S MANODEEP CONSTRUCTION

M/S BIJAY KUMAR SHIVA

SHRI D P AGARWAL

M/S BISHAL ENTERPRISES

Mazumder Construction