PROVISION OF HARD STANDING WITH COVERED EQPT PARKING WITH RCC ROOF FOR NEAR BLDG NO P 540 UNDER GE I GOS

Amount

M & L for Site Clearance in soft/loose soil complete all as specified and directed

Excavation in trenches n exc 1.5 Mtr wide and n exc 1.5 M deep and getting out in soft/loose soil (including cutting of roads) for shafts, wells, man holes and for sewage lines and foundation etc n exc 10 Sqm on plan all as specified.

M & L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base etc complete all as specified and directed

M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams ,and similar work; vertical or to batter for rough finished surfaces of concrete surfaces complete all as specified and directed

M & L for formwork to sides of square pillars, posts, struts, piers, columns and stanchions for rough finished surfaces of concrete surfaces complete all as specified and directed

M & L for formwork to sides and soffits of floor or roof beams, beam haunchings,girders, bressummers ,lintels, cantilevers, shelves including supports, overhangs,etc. lsosplays between floors and beams, etc. for rough finished surfaces of concrete complete all as specified and directed surfaces

M & L for formwork to chajjas,troughs and similar items including edges for rough finished surfaces of concrete surfaces complete all as specified and directed

M & L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Horizontal or sloping) for rough finished surfaces of concrete surfaces complete all as specified and directed

M & L for formwork to edges of concrete flats, treads, breaks in floors,window cills,concrete railings,openings in concretewalls, floor and roofs n exc 20cm wide and sides of RCC/PCC bands in walls, horizontalor sloping andsimilarwork exc 10cm but n exc 20cm wide for rough finished surfaces of concrete surfaces complete all as specified and directed

M & L for TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

M & L for TMT steel bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

M & L for reinforced cement concrete (designmix) in M-30 (20mm graded aggregates) for foundations, including rafts, footings, foundation beams; plinth beams bases for columns, etc, basement slabs, under-reamed piles and mass concretecomplete all as specified and directed

M & L for reinforced cement concrete (designmix) in M-30 (20mm graded aggregates) for Columns, pillars, piers,posts and struts complete all as specified and directed

M & L for reinforced cement concrete (designmix) in M-30 (20mm graded aggregates) for beams, cantilevers,bressummers, lintels over 1.5m span complete all as specified and directed

M & L for reinforced cement concrete (designmix) in M-30 (20mm graded aggregates) for Chajjas complete all as specified and directed

M & L for reinforced cement concrete (designmix) in M-30 (20mm graded aggregates) for slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and directed

M & L for 40mm thick cement concrete 1:2:4, type B-0(using 12.50mm graded aggregates) Damp proof course to horizontal or vertical surfaces including necessary formwork.complete all as specified and directed

M & L for brick work with sub-class ‘B’ bricks old size straight or curved on plan exc 6m mean radius built in CM 1:6, complete all as specified and directed.

Returning filling in of excavated any type soil including spreading leveling watering and well ramming in layers n exc 25 cm thick complete all as specified and directed.

M & L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed:

Removing surplus excavated materials (soil) to a distance exceeding 50 metre but n.exc 250 mtr & depositing where direct at level not exceeding 250 meter above the starting point, including spreading, leveling and compacting complete all as specified and directed

M & L for hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M & L for 75 mm thick PCC 1:3:6 type C-2 (using 20 mm graded stone aggregate) as in plinth protection, surface finished even and smooth without using extra cement, laid in panels n exc 3 mtr long and joints shall be filled with the mixture of bitumen and sand in (1:3) by weight, complete all as specified and directed.

M & L for anti- termite treatment for treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.

M & L for anti- termite treatment for treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and directed.

M & L for anti- termite treatment for treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed.

M & L for anti- termite treatment for treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.

M & L for anti- termite treatment for treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and directed.

M & L for rendering 5mm thick on fair faces of brick work or on concrete surfaces of ceiling in CM 1:4 surfaces finish fair and even with using extra cement complete all as specified and directed.

M & L for newly plaster surfaces of ceiling and apply Three coat of white wash complete all as specified and directed.

M & L for rendering 10mm thick cement plaster on other than fair face of brickwork surfaces of wall in CM 1:6 surfaces finish fair and even with using extra cement complete all as specified and directed.

M & L for newly plaster surfaces of wall and apply Three coat of white wash complete all as specified and directed.

M & L for rendering 15mm thick on fair faces of brick work or on concrete surfaces of wall in CM 1:4 surfaces finish fair and even without using extra cement complete all as specified and directed.

supply only Integral waterproofing compound complete all as specified and directed.

M & L for preparation of newly prepaired surface of wall and applying two coat of cement base paint over a coat of primer of same make on walls complete all as specified and directed.

M & L for 100mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base etc. complete all as specified and directed

M & L for 40 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in floor finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

M & L for 3mm thick and 38 mm Width of Glass dividing strips, complete all as specified and directed.

M & L for Cement concrete work in pavement / hard - standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less complete all as specified and directed

M & L for Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing com?pound, Grade ‘A’ (thickness of slab100mm) complete all as specified and directed

S & F in framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forget into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, frame work of water tank and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

M & L for preparation of new or previously untreated surface of steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

M & L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming to Fe 290 Gde E-165 complete all as specified and directed.

S&F factory made UPVC white colour Slinding Window three track made of extruded profiles with wall thickness of 2.3mm (±0.2mm), Window profile with hollow section with multi chamber, frame (110mm X 52mm), sliding sash (42mm X 67mm), Sliding mesh sash (20x50mm), sliding interlock (one vertical length in each shutter) (45.5mm X 28mm), glazing bead (24.5mm X 16mm) will be mitered, cut and fusion welded at all corners, including railing of holes for fixing hardware and drainage of water etc, making arrangement for fixing of hardware, EPDM gasket 1.2 ± 0.2mm thick galvanised steel frame (30mm x 18mm) 2 Nos, sliding sash (30mm X 18mm) 2 Nos, sliding mesh sash (26mm X 10mm), profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Haradware (tough lock of zinc alloyed (white powder coated), steel roller system, stainless steel wire cloth 0.36mm nominal dia of wire and average width of apaerture 1.40mm and required accessories 5.5mm thick glazing with ordinery glass and gauge as requiredat site. Note : (A) Area not exe 2.00 sqm each . (B) The unit rate quoted by contractor includes cost of glass and all other connected accessories.

M & L for provn of roof treatment with polymeric water proofing membrane all as given below:- (a) M & L for plastering 10mm in CM 1:3 using 100% course sand on roof including WPC @ 3% by weight of cement. (b) Applying a coat of bituminous primer conforming to IS: 3384-1986 @ 0.25 Iit/sqm on prepared surface and allowed to dry. (c) Applying and laying 3mm thick APP membrane having non woven polyester matt at core and covered with high quality polymeric asphaltic protected thermo fusible HMHDPE film on both sides with over laps 10cm and 15cm at longitudinal and transverse direction respectively and sealed by flame, sealing all overlaps complete including treatment at all junctions and corners. The membrane shall be torched into groove on vertical plane and groove sealed with cement mortar 1:3. (d) M & L for applying two coats of aluminium paint on membrane @ 0.10 Kg/Sqm (each coat) complete all as specified and directed.

Material and labour for One light point controlled by one 10amps switch, one way point wiring complete with 1.5 sqmm, PVC insulated, FRLSH type, ISI marked,conforming to IS-694/1990(as amended) unsheathed, multistranded, single core, copper conductor cable 1100 volts grade using approved colour coding drawn through and including PVC concealed conduit 20/25 mm dia medium grade (MMS) and incliding all accessories such as bend,tee,elbows,reducers,bell mouth tube ends,short pieces & junction boxes with PVC covers etc in walls / roofs / floors / ceiling etc and including cutting, chasing work at any height with flush mounting GI sunken boxes having top,bottom,side/back side knockout for conduit entry from any direction made out of 1.60mm thick, 60mm deep for housing modular switches,sockets,fan regulators, Indicators,blank plate etc and incl Providing modular white cover plate with inner frame suitable as per switch modules and including PVC insulated multistranded copper conductor 1.5 sqmm FRLSH type unsheathed (Green colour),single core cable as earth wire connecting to common earth dolly for further connection to ceiling rose and earth terminal and including making good the disturbed surfaces to match with existing surface and colour shade with proper putty for smooth finishing with existing wall complete all as specified and directed for the following:- (Note:- All necessary accessories such as modular box,top cover plate,inner frame, blank plate,GI sunken boxes,screws,washers and all modular electrical fixtures are used same make/brand only)

All as per iteme No 46 above, but One fan point controlled by one switch 10 amps, and one regulator.

All as per iteme No 46 above, but One 5 pin 6 amps socket point controlled by one 10 amps switch on independent board .

All as per iteme No 46 above, but One 5 pin 10 amps socket point controlled by one 10 amps switch on same board .

All as per item No.48 & 49 above, but point wiring with 2.5 sqmm and earth conductor of size 2.5 sqmm for one 6 pin 16/20 amps socket outlet point controlled by one 16/20 amps switch on independent board.complete all as specified and directed.

All as per item No.48 & 49 above, but point wiring with 2.5 sqmm and earth conductor of size 2.5 sqmm for one 6 pin 16/20 amps socket outlet point controlled by one 16/20 amps switch on same board.

All as per item No.48 above ,but point wiring with 4.0 sqmm and earth conductor of size 4 sqmm complete all as specified and directed.

Supply & fixing modular type switch 10 Amps, single pole,1way,1 module,240V,AC, with small indicator ISI Marked complete all as specified and directed. Make :- Havells (Crabtree) or equivalent in Legrand / Schneider (Zencelo) / AAB as existing type and as approved

Supply & fixing modular type switch 16/20 Amps, single pole,1way,1 module,240V,with small indicator,AC, ISI Marked complete all as specified and directed. Make :- Havells (Crabtree) or equivalent in Legrand / Schneider (Zencelo) / AAB as existing type and as approved

Supply & fixing modular type socket shuttered type 10 Amps, 2/3 Pin combined 2 module,240V,AC ISI Marked complete all as specified and directed. Make :- Havells (Crabtree) or equivalent in Legrand / Schneider (Zencelo) / AAB as existing type and as approved

Supply & fixing modular type socket 16/20 Amps, 6 Pin combined shuttered socket 2 module,240V,AC ISI Marked complete all as specified and directed. Make :- Havells (Crabtree) or equivalent in Legrand / Schneider (Zencelo) / AAB as existing type and as approved

Supply & fixing red color lighting indication lamp switch, single pole,240volts,AC,50 Hz suitable for 1 module ISI Marked complete all as specified and directed. Make :- Havells (Crabtree) or equivalent in Legrand / Schneider (Zencelo) / AAB as existing type and as approved.

Supply & fixing modular type step fan speed regulator 120W, 2 module,230volts,AC, 360 degree rotation 1 to 8 steps, ISI Marked complete all as specified and directed. Make :- Havells (Crabtree) or equivalent in Legrand / Schneider (Zencelo) / AAB as existing type and as approved

Supply & fix angle lamp holder latest model, insulated PVC out side body and brass inside holder with back plate for batten fittings/bulbs complete all as specified and directed. Make :- Havells (Crabtree) or equivalent in Legrand / Schneider (Zencelo) / AAB as existing type and as approved

Supply & fix ceiling rose, 3 terminal ,PVC/polycarbonate body ISI marked, complete all as specified and directed Make :- Havells (Crabtree) or equivalent in Legrand / Schneider (Zencelo) / AAB as existing type and as approved

Supply & fix 20 watt LED light fitting pride essential bright linea white lighting, high quality materials and slim intergrated design,extruded aluminium housing enhances safety, PC diffuser, reliable and robust housing structure ,maximize the endurance over the life time, easy to install, efficency 100 lm/w and including providing coloured end caps, pre-wired, and PVC/Wooden round/square block -02 Nos and connected with LED fitting to ceiling rose terminal and complete all as specified and directed. Make :- Havells ordering code.LHEXAWP7IN1W020 or equivalent make in Crompton/Philips

Supply and fixing LED 20 watt,6500K, Pride plus inverter batten,decorative type light fitting white lighting, with square profile and polycarbonate channel,lithium lon battery with charging time 8 hours to 10 hours and back up time upto 4 hours high quality materials and design,extruded aluminium housing enhances safety,high quality PC diffuser, easy to install, efficency 125 lm/w and including providing pre-wired, and PVC/Wooden round or square blocks -02 Nos and connected with LED fitting to ceiling rose and complete all as specified and directed. Make :-Havells Cat No. LHEXACP7FN1W020 or equivalent make in Crompton/Philips

Supply and fix LED secruity light fitting of capacity 40 Watt LED street light fitting in aluminium PDC housing, toughened glass cover with IP65 protection with 4/5 KV inbuilt surge protector and cable connection from ceiling rose/looping box/switch board/DBs to light fitting and testing and complete all as specified and directed.Make:- Crompton cat ref No.LSTS-40-CDL-M or equivalent make in Havells / Philips as approved

Supply and fixed in repairs LED floof light light fitting of capacity 100 Watt LED, light fitting in aluminium PDC housing, toughened glass cover with IP65 protection with 4/5/10 KV inbuilt surge protector and cable connection from looping box to light fitting and testing complete all as specified and directed.Make:-Havells Cat NO.LHEECNP7PB7J100 or equivalent in approved make

S & F Energy efficient and energy saving new generation 10 watts LED bulk head light fitting IP-65 luminaire with opel diffuser pre-wired of luminaires including LED light driver and connected with LED fitting to ceiling rose terminal and complete all as specified and directed. Make :-Havells Cat No. LHFHDPE1TN1K020 or equivalent make in Crompton/Philips

Supply & fixing and sheet metal enclosure with acrylic door type, double door ,415 volts AC,TPN DB, 12 way,8+12 modules, flush mounting with 200amps copper busbar, 2 neutral/earth bars links and MCB incomer, and MCB SPN/SP/TPN as outgoing and complete for IP43&54 DBs protection and complete all as specified and as directed.Make:-Legrand Cat No.5077 30 4 way or equivalent make in ABB/Havells

Supply & fix MCB SP 6 to 32 Amps 10 KA,"C" series,AC,240Volts,50Hz , ISI marked and including removing old unsv items complete all as specified and directed.Make:- Legrand/ABB/Havells or as approved make

Supply & fix and MCB SPN 32 to 40 Amps 10 KA,"C" series,AC,240Volts,50Hz, ISI marked and including removing old unsv items complete all as specified and directed.Make:- Legrand/Hager/Havells or as approved make

Supply & fix and MCB TPN 63 Amps 10 KA,"C" series,AC,415Volts,50Hz, ISI marked and including removing old unsv items complete all as specified and directed.Make:- Legrand/Hager/Havells or as approved make

Supply and fix new exhaust fan, steel body AC single phase.230Volts of size 300 mm sweep with blades and including providing insect protection net frame , with louvers and frame incl writing MES No on exhaust fan with synthetic enamel paint complete all as specified and directedcomplete all as specified and directed.Make:-Atomberg/Havells/Crompton or as approved make

Supply and fix wall mounted air circulator fan 230Volts, single phase, oscillating type, 500 mm sweep, Hi-speed,low noise with blades and outer cover and including providing hanging hook and connected items incl writing MES No on wall fan with synthetic enamel paint complete all as specified and directedcomplete all as specified and directed.Make:-Atomberg/Havells/Crompton or as approved make

Cutting the surface wall of brick masonary and making round hole at any height suitable for fixing 200 to 450 mm sweep exhaust fan including providing nut,bolt and washers after grouting in PCC and including 3 mm dia 5 cm apreature size GI jali and proper aluminium frame to avoid insect protection fix at inner surface of wall and making good the disturbed surface area complete all as specified and directed.

Material and labour for Earthing complete with galvanised steel earth plate electrode 600mmX 600mmX 6mm thick buried directely in ground vertically ( earth pit not less than 2.25 meters deep below ground level) with top edge of plate not less than 1.5 metres below ground level, connected to and including galvanised iron wire 4 mm dia and light grade protection pipe of 15 mm dia from earth electrode up to test point or up to 7.5mtr whichever is less by means of GI bolts, nuts, check nuts and washers all as per electrical plate No 3 of SSR Pt-I and GI watering pipe of 20 mm dia medium grade,GI funnel with wire mesh,including charcoal, salt packed all around the earth electrode plate in layers, PCC earth pit chamber 1:3:6 type C1, of size 45X 45X 45 CM,RCC/(PVC hevy duty cover) cover 1:2:4 type B1 of size 45X45X6 CM, excavation/earth work in any strata and returning filling, removal of surplus soil and testing/test point for required value complete all as specified and directed.

Supply and fix GI bracket pipe of size 32 mm dia medium grade of 1.2 mtr long bent to shape suitable degree of bending as per site requirement with hot or cold bending method of process for making the one end of GI pipe bracket suitable for fixing of any type street light fitting and shall be fixed on wall surfaces and including providing suitable fabricate galvanised flat iron clamps of 30X6 mm thick -02 Nos suitable for fixing at any place/height with hole fastners,nuts,bolts & washers including grouting on wall etc complete all as specified and directed.Make of GI pipe:- Jinadal/Tata/Surya Prakash

Material and labour for XLPE insulated,LT armoured electric cable with aluminium standed conductor 1100 volts grade,cross-sectional area 25 sqmm ,4 core laid in trenches/pipes/ducts/wall/boarings with necessary cable lugs and glands,nuts,bolts and washers,saddeling on wall properly etc and testing and including removing old unsv UG cables complete all as specified and directed.

Material and labour for XLPE insulated,LT armoured electric cable with aluminium standed conductor 1100 volts grade,cross-sectional area 6 sqmm ,2 core laid in trenches/pipes/ducts/wall/boarings with necessary cable lugs and glands,nuts,bolts and washers,saddeling on wall properly etc and testing and including removing old unsv UG cables complete all as specified and directed.

Boaring holes horizontally under road without damaging the surface of road (minimum 1.0 Mtr bellow the road surface) with the help of GI tubing of any dia not exc 80mm dia for passing of UG cable all as specified and as directed.

Material and labour for PCC 1:2:4 type B1 using (20 mm graded stone aggregate) for making good cutting portion coping of pole and filling of foundation etc including necessary use and waste of form work complete all as specified and directed.Note:- Top surface of pole coping to making smooth finishing and white washing made by the contractor cost deemed into quoted rete only.

Supply and filling in and speading unwashed river sand for cushioning and covering the under ground cables in trenches and punning to provide required cover complete all as specified in SSR Part-I and as directed.

M & L for brick sub class 'B' 250mm x 115mm x 0.75mm and laid in trenches as in protection of UG cable complete all as specified and directed.

Material & labour for GI pipe 50 mm "light grade" laid in trenches floors/on , pole/road for cable protection with all fittings complete all as specified and directed.Make:- Jindal/Tata/swastik/BST

Supply and fix copper conductor cable, PVC insulated, sheathed,flexible, multistranded,ISI marked, 1100 volts grade 3 core ;1.0 sqmm and including electric connection from ceiling fan to ceiling rose complete all as specified and directed. Make:-Havells/Finolex/Polycab

M/s Ats Electricals

M/S JAGANNATH SASMAL

M/s MAA BHAIRABI ENTERPRISES

M/S SIWALIK AND CO

M/S S.K GHOSE

HARAGOURI SUPPLIERS

R K Traders