Carryout the Renovation works in TNCSC godown campuses at Pennagaram, Palacode, Harur and Dharmapuri in Dharmapuri District

Amount

CIVIL WORK

Renovation works to the loading platforms, AC sheet roof, flooring, walls and painting to the godown”s with formation of road to front side in TNCSC godown campus at Dharmapuri Taluk & District. Clearing Scrub Jungle

Dismantling, clearing away and carefully stacking materials useful for useful for any thickness of walls, Dismantling PCC,

Earthwork on Excavation for foundation in all classes of soils and sub soils and to full depth as may be directed except in rock requiring blasting including initial leads and lifts refilling the sids foundation with excavated earth in 150 mm layers well watered, rammed and consolidated including depositing surplus earth within the godown or inside compound in places shown with initial lead of 10 mts and initial lift of 2 mts. Clearing, leveling the site, shoring strutting bailing of water wherever necessary etc., complete complying with standard specifications and as directed .

Supplying and filling in foundation and basement with M Sand in layers of 150mm thick, including watering with all layers and consolidation, etc., complete complying with standard specifications

CEMENT CONCRETE 1:5:10(one cement, five M sand and ten aggregate)using 40mm gauge hard broken granite stone jelly for foundation including cost nd conveyance of all materials labour for mixing laying compacting, curing, dewatering side shuttering wherever necessary including curing etc., complete complying with standard specifications and as directed.

Cement Concrete 1:2:4 ( one cement, two crushed stone sand hard broken granite stone jelly for all RCC works excluding cost of reinforcement grill and fabricating charges, centering and shuttering but including laying vibrating with mechanical vibrator, finishing curing etc., and providing fixturers like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc., shall be finished smooth with cement mortar 1:3 (one cement and three sand) and kraft paper laid over it without claiming extra etc., complete complying with standard specifications and as directed.

Supplying, fabricating and placing in position MS grills for reinforcement for all R.C.C. works including cost of rods straighterning bending cracking typing grills with 18 gauge galvanished binding wire and placing the grills in position etc., complete and as directed. The steel rods alone will be supplied by the corporation at site of work and the cost will be.

Brick work in cement mortar 1:5 (one cement and five M sand) using best quality II class ground moulded chamber bricks 9”x4 3/8”x 2 ¾”for the following including curing etc., complete complying with standard specifications and as directed.

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footing, column pedestals, plinth beams, grade beams, staircase steps etc., which require only nominal strutting using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at not more than 75 cm centre to centre etc., complete complying with the standard specification. (payment for centering shall be given after the For Plinth beam grade beam, etc.,

For plane surfaces such as RCC floor slab, roof slab, beams lintels, bed blocks, lading slab,

RCC plane surfaces such as rectangular or square RCC columns, Sunshades, top and bottom slab of RCC boxing etc.,

Dismantling, clearing away and carefully stacking materials reuse. ACsheet roofing without roof timbers

Supplying and fixing AC sheet roofing with 6mm thick asbestos cement sheet of fully corugated (grey colour) of approved quality by drilling holes (and not by punching) with necessary J / U’ bolts and nuts of 8mm dia of suitable length and providing one set of bitumen washers of 25mm dia and 1.60mm thick for each bolt including protruding portion of bolts in roof shall be covered with bitumen compound etc. complete complying with standard specification and as directed by the departmental officers.

Labour charges for re-roofing AC sheet with necessary J / U bolts and nuts of 8mm dia of suitable length and providing one st of bitumen washers of 25mm dia and 1.60mm thick for each bolt including protruding of bolts in roof shall be covered with bitumen compound etc., complete complying with standard specification and as directed by the departmental officers.

Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the departmental officers.

Finishing the top of roof with one course of pressed tiles of size 23x23x2 cm of approved quality in cement mortar 1:3 12mm thick with water proofing compound confirming of IS at 2@ by weight of cement used and the top pointed with same mortar is mixed with red oxide to the full depth of tiles etc., complete complying with standard specification

Servicing the existing rolling shutter of size 1.80 x 2.60m such as sprint tension adjustment attending leaves repair works, locking adjustments, applying grease and kerosene washing for easy uplifting cost of labour for removing and rfixing the rolling shutter, cost of kerosene and grease etc., complete complying with standard specification and as directed.

Supplying and fabrication of M.S Angle iron section for vertical stanction and forming truss used with M.S square/Rectangular pipe and necessary M.S angles for cleat, and .for purlins with M.S square pipe has to be fabricated including cost of one coat of primer, bolt and nuts etc., complete complying with standard specification and as per the direction of corporation officers.

Supplying and laying of profile colour galvalume sheet with combination 55A1:43 4Zn:1:6SI of TCT bent type 0.47mm thick and standard width of 1.06m with yield strength of 550 MPA made from high tensile/ CR sheets of approved quality for roofing with necessary fixing arrangements like 65m abd long hexagonal head screws with EPDM rubber seal etc., complete, complying with standard specification and as directed by the departmental officer during execution of work.

Supply and fixing of 40x6mm G.I flat over the Galvalume sheet roofing which is placed on the top of purlin in the longitudinal direction to avoid the lifting of roofing due to wind, the rate inclusive of necessary G.I screw, Rubber, Aluminum washer with necessary adhesive flashing tap fixed directly over the galvalume sheet, labour charges for fixing, conveyance loading, unloading and cutting, etc. complete.,

Supplying and fixing in position 100mm x 50mm x9.4 kg channel for the face of RAT GUARD EDGING SLAB with MS bolts 16mm dis 45cm long at 2m centres forming projection to the loading platform finishing in flush with the slab with C.M 1:3 (one cement and three sand) etc., complete including painting the exposed surface of MS channel with coats of ANTI CORROSIVE METALLIC NUT BROWN COLOUR PAINT over one coat red oxide primer etc., comple ( The required quantities of MS channel will be supplied departmentally and cost

PLASTERING with cement mortor 1:5 (one cement and five M sand) 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc., complete complying with standard specification

Finishing the exposed surface of all RCC items of work such as slabs, beams, sunshade, facia, canopy slab, staircase waist slab, landing slab etc., with cement mortar 1:3 (one cement and three M sand) 10mm thick including hacking the surfaces, providing cement mortar nosing beading for sunshades, staircases, steps, landing slabs and curing etc., in all floors complying with standard specification and as directed by the departmental officers.

Renewing the broken glass panes of 4mm thick with new glass panes of 4mm thick of approved quality including fixing in position with TW beading all round the glass panes with nails etc., complete complying with standard specification and as directed by the departmental officers

Supplying and fixing inposition 15mm dia brass Screw down tap/pillar tap ( heavy duty) of approved make conforming to BIS specification and quality including cost of shellac, thread etc., complete complying with standard specification and including cutting and threading wherever necessary (taps should be got approved by Executive Engineer before use on the work)

Painting two coats of existing plastered wall surface with ready mixed plastic emulsion paint of first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.toilet compound wall godown

White washing Two coat with freshly burnt white shell lime in all floors including cost of shell lime, blue powder fevicol type gum, brushes scaffolding charges etc., etc., complete complying with standard specification and as directed by the departmental officers.

White washing one coat with freshly burnt white shell lime in all floors including cost of shell lime, blue powder fevicol type gum, brushes scaffolding charges etc., etc., complete complying with standard specification and as directed by the departmental officers.

Supplying and fixing of M.S.iron grill gate using necessary M.S.angles/m.s.flats which should be fixed to gate as per design furnished by the departmental officers including cost of one coat of primer paint, all labour charges for cutting, welding and fixing in position etc., complete complying with standard specification

Painting old iron works such as steel doors, windows, ventilators, windows bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over one coat of red oxide priming coat in all floors including cost of priming coat etc., ( The make, quality and colour of paint should be got approved by the Executive Engineer before use on works).

Supply and filling in basement with wet mix 250mm thick in layers not exceeding 250mm thick well watering ramming and consolidation including machineries for higher and running charges leader 5 cum capacity hire charges for tipper water sprinkler vibtory roller etc complete and all labour charges as directed by the departmental officers. (Average Thickenss

WBM Providing and laying WBM mm compacted thickness with grade II metal using 1.00 cum of 53-22.40 mm IRC size metal with 0.24 cum of gravel for bilndage per 10 sq.mm including cost and conveyance of all materials and stacking them at the site to departmental gauge for premeasurement labour charges for spreading metal and gravel hand packing to chamber watering with all leads for water and compaction by 80-100 kn power roller water sprinkler and all other tools and plants empolyed barricading etc., complete as per clause 404 0f most specification.

WBM Providing and laying WBM mm compacted thickness with grade III metal using 1.00 cum of 63-11.20 mm IRC size metal with 0.24 cum of gravel for bilndage per 10 sq.mm including cost and conveyance of all materials and stacking them at the site to departmental gauge for premeasurement labour charges for spreading metal and gravel hand packing to chamber watering with all leads for water and compaction by 80-100 kn power roller water sprinkler and all other tools and plants employed barricading etc., complete as per clause 404 0f most specification.

Renovation works to the loading platforms, AC sheet roof, flooring, walls and painting to the godown”s with formation of road to front side in TNCSC godown campus at Pennagaram Taluk in Dharmapuri District. Clearing Scrub Jungle

Dismantling, clearing away and carefully stacking materials useful for useful for any thickness of walls, Dismantling PCC,

Clean removal of cement plaster

Pressed tiles in roof portion

Earthwork on Excavation for foundation in all classes of soils and sub soils and to full depth as may be directed except in rock requiring blasting including initial leads and lifts refilling the sids foundation with excavated earth in 150 mm layers well watered, rammed and consolidated including depositing surplus earth within the godown or inside compound in places shown with initial lead of 10 mts and initial lift of 2 mts. Clearing, leveling the site, shoring strutting bailing of water wherever necessary etc., complete complying with standard specifications and as directed .

Supplying and filling in foundation and basement with M Sand in layers of 150mm thick, including watering with all layers and consolidation, etc., complete complying with standard specifications

CEMENT CONCRETE 1:5:10(one cement, five M sand and ten aggregate)using 40mm gauge hard broken granite stone jelly for foundation including cost nd conveyance of all materials labour for mixing laying compacting, curing, dewatering side shuttering wherever necessary including curing etc., complete complying with standard specifications and as directed.

Cement Concrete 1:2:4 ( one cement, two crushed stone sand hard broken granite stone jelly for all RCC works excluding cost of reinforcement grill and fabricating charges, centering and shuttering but including laying vibrating with mechanical vibrator, finishing curing etc., and providing fixturers like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc., shall be finished smooth with cement mortar 1:3 (one cement and three sand) and kraft paper laid over it without claiming extra etc., complete complying with standard specifications and as directed.

Supplying, fabricating and placing in position MS grills for reinforcement for all R.C.C. works including cost of rods straighterning bending cracking typing grills with 18 gauge galvanished binding wire and placing the grills in position etc., complete and as directed. The steel rods alone will be supplied by the corporation at site of work and the cost will be.

Brickwork in cement mortar using best quality II class table moulded chamber bricks 9”x4 3/8”x 2 ¾”for the following including curing etc., complete complying with standard specifications and as directed.

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footing, column pedestals, plinth beams, grade beams, staircase steps etc., which require only nominal strutting using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at not more than 75 cm centre to centre etc., complete complying with the standard specification. (payment for centering shall be given after the concrete is laid for coloumn footing coloum pedstals plinth beam grade beam etc.,

For plane surfaces such as RCC floor slab, roof slab, beams lintels, bed blocks, lading slab,

Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the departmental officers.

Finishing the top of roof with one course of pressed tiles of size 23x23x2 cm of approved quality in cement mortar 1:3 12mm thick with water proofing compound confirming of IS at 2@ by weight of cement used and the top pointed with same mortar is mixed with red oxide to the full depth of tiles etc., complete complying with standard specification

Servicing the existing rolling shutter of size 1.80 x 2.60m such as sprint tension adjustment attending leaves repair works, locking adjustments, applying grease and kerosene washing for easy uplifting cost of labour for removing and rfixing the rolling shutter, cost of kerosene and grease etc., complete complying with standard specification and as directed.

Supplying and fabrication of M.S.Angle section vertical stanction and forming truss used with M.S.square/rectangular pipe and necessary M.S.Angle for cleat –For purlins M.S.square pipe has to be fabricated as per the corporation officers M.S.Angle

Supplying and laying of profile colour galvalume sheet with combination 55A1:43 4Zn:1:6SI of TCT bent type 0.47mm thick and standard width of 1.06m with yield strength of 550 MPA made from high tensile/ CR sheets of approved quality for roofing with necessary fixing arrangements like 65m abd long hexagonal head screws with EPDM rubber seal etc., complete, complying with standard specification and as directed by the departmental officer during execution of work.

Supply and fixing of 40x6mm G.I flat over the Galvalume sheet roofing which is placed on the top of purlin in the longitudinal direction to avoid the lifting of roofing due to wind, the rate inclusive of necessary G.I screw, Rubber, Aluminum washer with necessary adhesive flashing tap fixed directly over the galvalume sheet, labour charges for fixing, conveyance loading, unloading and cutting, etc. complete.,

Supplying and fixing in position 100mm x 50mm x9.4 kg channel for the face of RAT GUARD EDGING SLAB with MS bolts 16mm dis 45cm long at 2m centres forming projection to the loading platform finishing in flush with the slab with C.M 1:3 (one cement and three sand) etc., complete including painting the exposed surface of MS channel with coats of ANTI CORROSIVE METALLIC NUT BROWN COLOUR PAINT over one coat red oxide primer etc., comple ( The required quantities of MS channel will be supplied departmentally and cost

PLASTERING with cement mortor 1:5 (one cement and five M sand) 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc., complete complying with standard specification.

Plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshade, facia, canopy slab, staircase waist slab, landing slab etc., with cement mortar 1:3 (one cement and three sand) 10mm thick including hacking the surfaces, providing cement mortar nosing beading for sunshades, staircases, steps, landing slabs and curing etc., in all floors complying with standard specification and as directed by the departmental officers.

Renewing the broken glass panes of 4mm thick with new glass panes of 4mm thick of approved quality including fixing in position with TW beading all round the glass panes with nails etc., complete complying with standard specification and as directed by the departmental officers

Supplying fabricating and fixing in position of mild steel door with single/double shutters using M.S.Angle of size 40x40x6mm for outer frames and 35x35x5mm for shouter frames fully covered with M.S.sheet of 18 gauge with M.S.Flat of size 32x6 mm for internal stiffiners and one number of aldrop, two numbers of tower bolts, holdfasts, hinges, handles etc, including providing one coat of red oxide primer. The rates shall inclusive of cost of all materials labour charges for fixing the door in position by dismantling the masonry, concrete etc., and redoing the same to the original condition duly packed with concrete etc., complete.

Painting two coats of newly plastered wall surface with ready mixed Exterior emulsion paint of first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.toilet compound wall godown

Painting one coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.toilet compound wall godown

White washing Two coat with freshly burnt white shell lime in all floors including cost of shell lime, blue powder fevicol type gum, brushes scaffolding charges etc., etc., complete complying with standard specification and as directed by the departmental officers. godown

White washing Two coat with freshly burnt white shell lime in all floors including cost of shell lime, blue powder fevicol type gum, brushes scaffolding charges etc., etc., complete complying with standard specification and as directed by the departmental officers. godown

Supplying and fixing of M.S.iron grill gate using necessary m.s.angles/m.s.flats which should be fixed to gate as per design furnished by the departmental officers including cost of one coat of primer paint, all labour charges for cutting, welding and fixing in position etc., complete complying with standard specification

Painting old iron works such as steel doors, windows, ventilators, windows bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over one coat of red oxide priming coat in all floors including cost of priming coat etc., ( The make, quality and colour of paint should be got approved by the Executive Engineer before use on works).

supply and filling in basement with wet mix 250mm thick in layers not exceeding 250mm thick well watering ramming and consolidation including machineries for higher and running charges leader 5 cum capacity hire charges for tipper water sprinkler vibtory roller etc complete and all labour charges as directed by th departmental officers. (Average Thickenss

WBM Providing and laying WBM mm compacted thickness with grade II metal using 1.00 cum of 53-22.40 mm IRC size metal with 0.24 cum of gravel for bilndage per 10 sq.mm including cost and conveyance of all materials and stacking them at the site to departmental gauge for premeasurement labour charges for spreading metal and gravel hand packing to chamber watering with all leads for water and compaction by 80-100 kn power roller water sprinkler and all other tools and plants empolyed barricading etc., complete as per clause 404 0f most specification.

WBM Providing and laying WBM mm compacted thickness with grade III metal using 1.00 cum of 63-11.20 mm IRC size metal with 0.24 cum of gravel for bilndage per 10 sq.mm including cost and conveyance of all materials and stacking them at the site to departmental gauge for premeasurement labour charges for spreading metal and gravel hand packing to chamber watering with all leads for water and compaction by 80-100 kn power roller water sprinkler and all other tools and plants employed barricading etc., complete as per clause 404 0f most specification.

Renovation works to the loading platforms, AC sheet roof, flooring, walls and painting to the godown”s with formation of road to front side in TNCSC godown campus at Palacode Taluk in Dharmapuri District. Clearing Scrub Jungle

Earthwork on Excavation for foundation in all classes of soils and sub soils and to full depth as may be directed except in rock requiring blasting including initial leads and lifts and refilling the sides of foundation with excavated earth in 150mm layers well watered, rammed and consolidated including depositing surplus earth within the godown or inside compound in places shown with an initial leads of 10 mts and initial lift of 2 mts and clearing and leveling the site etc., complete complying with standard specifications’. Toilet, compound wall

Supplying and filling in foundation and basement with M Sand in layers of 150mm thick, including watering with all layers and consolidation, etc., complete complying with standard specifications .

CEMENT CONCRETE 1:5:10(one cement, five Msand and ten aggregate)using 40mm gauge hard broken granite stone jelly for foundation including dewatering if found necessary and laid in layer of not more than 5cm thick well rammed, consolidated and curing etc, complete complying with standard specifications. Toilet compound wall, flooring

Reinforcement Cement Concrete 1:2:4 ( one cement, two M sand, four hard broken stone jelly) using 20mm of hard broken granite stone for all RCC items of works excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing curing etc., and providing fixtures like fan clamps in the RCC floor/roof slabs whrever necessary and bearing surfaces of walls beams etc., shall be finished smooth with cement mortar 1:3 (one cement and three sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specifications and as directed

Supplying, fabricating and placing in position MS grills for reinforcement for all R.C.C. works including cost of rods straighterning bending cracking typing grills with 18 gauge galvanished binding wire and placing the grills in position etc., complete and as directed. The steel rods alone will be supplied by the corporation at site of work and the cost will be.

Brickwork in cement mortar using best quality II class table moulded chamber bricks 9”x4 3/8”x 2 ¾”for the following including curing etc., complete complying with standard specifications and as directed.

RANDAM RUBBLE MASONRY in Cement mortor 1 : 5(one cement and five sand ) using hard granite stone with necessary bond stone, including cost of scaffolding, finishing, curing and also with simultaneously flush pointing etc., complete complying with standard specification and as directed.

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footing, column pedestals, plinth beams, grade beams, staircase steps etc., which require only nominal strutting using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at not more than 75 cm centre to centre etc., complete complying with the standard specification. (payment for centering shall be given after the concrete is laid for coloumn footing coloum pedstals plinth beam grade beam etc.,

For plane surfaces such as RCC floor slab, roof slab, beams lintels, bed blocks, lading slab,

RCC plane surfaces such as rectangular or square RCC columns, Sunshades, top and bottom slab of RCC boxing etc.,

Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of walls, AC sheet roofing without roof timbers.

Supplying and fixing AC sheet roofing with 6mm thick asbestos cement sheet of fully corugated (grey colour) of approved quality by drilling holes (and not by punching) with necessary J / U’ bolts and nuts of 8mm dia of suitable length and providing one set of bitumen washers of 25mm dia and 1.60mm thick for each bolt including protruding portion of bolts in roof shall be covered with bitumen compound etc. complete complying with standard specification and as directed by the departmental officers.

Labour charges for re-roofing AC sheet with necessary J / U bolts and nuts of 8mm dia of suitable length and providing one st of bitumen washers of 25mm dia and 1.60mm thick for each bolt including protruding of bolts in roof shall be covered with bitumen compound etc., complete complying with standard specification and as directed by the departmental officers.

Servicing the existing rolling shutter of size 1.80 x 2.60m such as sprint tension adjustment attending leaves repair works, locking adjustments, applying grease and kerosene washing for easy uplifting cost of labour for removing and rfixing the rolling shutter, cost of kerosene and grease etc., complete complying with standard specification and as directed.

Supplying and fabrication of M.S Angle iron section for vertical stanction and forming truss used with M.S square/Rectangular pipe and necessary M.S angles for cleat, and .for purlins with M.S square pipe has to be fabricated including cost of one coat of primer, bolt and nuts etc., complete complying with standard specification and as per the direction of corporation officers.

Supplying and laying of profile colour galvalume sheet with combination 55A1:43 4Zn:1:6SI of TCT bent type 0.47mm thick and standard width of 1.06m with yield strength of 550 MPA made from high tensile/ CR sheets of approved quality for roofing with necessary fixing arrangements like 65m abd long hexagonal head screws with EPDM rubber seal etc., complete, complying with standard specification and as directed by the departmental officer during execution of work.

Supply and fixing of 40x6mm G.I flat over the Galvalume sheet roofing which is placed on the top of purlin in the longitudinal direction to avoid the lifting of roofing due to wind, the rate inclusive of necessary G.I screw, Rubber, Aluminum washer with necessary adhesive flashing tap fixed directly over the galvalume sheet, labour charges for fixing, conveyance loading, unloading and cutting, etc. complete.,

Supplying and fixing in position 100mm x 50mm x9.4 kg channel for the face of RAT GUARD EDGING SLAB with MS bolts 16mm dis 45cm long at 2m centres forming projection to the loading platform finishing in flush with the slab with C.M 1:3 (one cement and three sand) etc., complete including painting the exposed surface of MS channel with coats of ANTI CORROSIVE METALLIC NUT BROWN COLOUR PAINT over one coat red oxide primer etc., comple ( The required quantities of MS channel will be supplied departmentally and cost

PLASTERING with cement mortor 1:5 (one cement and five M sand) 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc., complete complying with standard specification.

Plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshade, facia, canopy slab, staircase waist slab, landing slab etc., with cement mortar 1:3 (one cement and three sand) 10mm thick including hacking the surfaces, providing cement mortar nosing beading for sunshades, staircases, steps, landing slabs and curing etc., in all floors complying with standard specification and as directed by the departmental officers.

Renewing the broken glass panes of 4mm thick with new glass panes of 4mm thick of approved quality including fixing in position with TW beading all round the glass panes with nails etc., complete complying with standard specification and as directed by the departmental officers

Painting two coats of old plastered wall surface with ready mixed plastic emulsion paint of first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Painting one coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

White washing Two coat with freshly burnt white shell lime in all floors including cost of shell lime, blue powder fevicol type gum, brushes scaffolding charges etc., etc., complete complying with standard specification and as directed by the departmental officers. godown

White washing Two coat with freshly burnt white shell lime in all floors including cost of shell lime, blue powder fevicol type gum, brushes scaffolding charges etc., etc., complete complying with standard specification and as directed by the departmental officers. godown

Supplying and fixing of M.S.iron grill gate using necessary m.s.angles/m.s.flats which should be fixed to gate as per design furnished by the departmental officers including cost of one coat of primer paint, all labour charges for cutting, welding and fixing in position etc., complete complying with standard specification

Painting new iron works such as steel doors, windows, ventilators, windows bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over one coat of red oxide priming coat in all floors including cost of priming coat etc., ( The make, quality and colour of paint should be got approved by the Executive Engineer before use on works).

supply and filling in basement with wet mix 250mm thick in layers not exceeding 250mm thick well watering ramming and consolidation including machineries for higher and running charges leader 5 cum capacity hire charges for tipper water sprinkler vibtory roller etc complete and all labour charges as directed by th departmental officers. (Average Thickenss

WBM Providing and laying WBM mm compacted thickness with grade II metal using 1.00 cum of 53-22.40 mm IRC size metal with 0.24 cum of gravel for bilndage per 10 sq.mm including cost and conveyance of all materials and stacking them at the site to departmental gauge for premeasurement labour charges for spreading metal and gravel hand packing to chamber watering with all leads for water and compaction by 80-100 kn power roller water sprinkler and all other tools and plants empolyed barricading etc., complete as per clause 404 0f most specification.

WBM Providing and laying WBM mm compacted thickness with grade III metal using 1.00 cum of 63-11.20 mm IRC size metal with 0.24 cum of gravel for bilndage per 10 sq.mm including cost and conveyance of all materials and stacking them at the site to departmental gauge for premeasurement labour charges for spreading metal and gravel hand packing to chamber watering with all leads for water and compaction by 80-100 kn power roller water sprinkler and all other tools and plants employed barricading etc., complete as per clause 404 0f most specification.

Renovation works to the loading platforms, AC sheet roof, flooring, walls and painting to the godown”s with formation of road to front side in TNCSC godown campus at Harur Taluk in Dharmapuri District. Clearing Scrub Jungle

Dismanting clearing away and carefully stacking materials useful for re-use for any thickness of walls, plain cement concrete.

Earthwork on Excavation for foundation in all classes of soils and sub soils and to full depth as may be directed except in rock requiring blasting including initial leads and lifts and refilling the sides of foundation with excavated earth in 150mm layers well watered, rammed and consolidated including depositing surplus earth within the godown or inside compound in places shown with an initial leads of 10 mts and initial lift of 2 mts and clearing and leveling the site etc., complete complying with standard specifications’. Toilet, compound wall

Supplying and filling in foundation and basement with M Sand in layers of 150mm thick, including watering with all layers and consolidation, etc., complete complying with standard specifications .

CEMENT CONCRETE 1:5:10(one cement, five sand and ten aggregate)using 40mm gauge hard broken granite stone jelly for foundation including dewatering if found necessary and laid in layer of not more than 5cm thick well rammed, consolidated and curing etc, complete complying with standard specifications. Toilet compound wall, flooring

Cement Concrete 1:2:4 ( one cement, two sand, four hard broken stone jelly) using 20mm of hard broken granite stone for all RCC items of works excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing curing etc., and providing fixtures like fan clamps in the RCC floor/roof slabs whrever necessary and bearing surfaces of walls beams etc., shall be finished smooth with cement mortar 1:3 (one cement and three sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specifications and as directed

Supplying, fabricating and placing in position MS grills for reinforcement for all R.C.C. works including cost of rods straighterning bending cracking typing grills with 18 gauge galvanished binding wire and placing the grills in position etc., complete and as directed. The steel rods alone will be supplied by the corporation at site of work and the cost will be.

Brickwork in cement mortar using best quality II class table moulded chamber bricks 9”x4 3/8”x 2 ¾”for the following including curing etc., complete complying with standard specifications and as directed.

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footing, column pedestals, plinth beams, grade beams, staircase steps etc., which require only nominal strutting using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at not more than 75 cm centre to centre etc., complete complying with the standard specification. (payment for centering shall be given after the concrete is laid for coloumn footing coloum pedstals plinth beam grade beam etc.,

For plane surfaces such as RCC floor slab, roof slab, beams lintels, bed blocks, lading slab,

RCC plane surfaces such as rectangular or square RCC columns, Sunshades, top and bottom slab of RCC boxing etc.,

Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of walls, AC sheet roofing without roof timbers.

Supplying and fixing AC sheet roofing with 6mm thick asbestos cement sheet of fully corugated (grey colour) of approved quality by drilling holes (and not by punching) with necessary J / U’ bolts and nuts of 8mm dia of suitable length and providing one set of bitumen washers of 25mm dia and 1.60mm thick for each bolt including protruding portion of bolts in roof shall be covered with bitumen compound etc. complete complying with standard specification and as directed by the departmental officers.

Labour charges for re-roofing AC sheet with necessary J / U bolts and nuts of 8mm dia of suitable length and providing one st of bitumen washers of 25mm dia and 1.60mm thick for each bolt including protruding of bolts in roof shall be covered with bitumen compound etc., complete complying with standard specification and as directed by the departmental officers.

Weathering course with broken brick jelly 20mm size pure slacked lime over RCC roof slab the preparation of 32:12.5 for required depth and slope etc., complete.

Finishing the top of roof with one course of pressed tiles of size 23x23x2 cm of approved quality in cement mortar 1:3 12mm thick with water proofing compound confirming of IS at 2@ by weight of cement used and the top pointed with same mortar is mixed with red oxide to the full depth of tiles etc., complete complying with standard specification.

Servicing the existing rolling shutter of size 1.80 x 2.60m such as sprint tension adjustment attending leaves repair works, locking adjustments, applying grease and kerosene washing for easy uplifting cost of labour for removing and rfixing the rolling shutter, cost of kerosene and grease etc., complete complying with standard specification and as directed.

Supplying and fabrication of M.S Angle iron section for vertical stanction and forming truss used with M.S square/Rectangular pipe and necessary M.S angles for cleat, and .for purlins with M.S square pipe has to be fabricated including cost of one coat of primer, bolt and nuts etc., complete complying with standard specification and as per the direction of corporation officers.

Supplying and laying of profile colour galvalume sheet with combination 55A1:43 4Zn:1:6SI of TCT bent type 0.47mm thick and standard width of 1.06m with yield strength of 550 MPA made from high tensile/ CR sheets of approved quality for roofing with necessary fixing arrangements like 65m abd long hexagonal head screws with EPDM rubber seal etc., complete, complying with standard specification and as directed by the departmental officer during execution of work.

Supply and fixing of 40x6mm G.I flat over the Galvalume sheet roofing which is placed on the top of purlin in the longitudinal direction to avoid the lifting of roofing due to wind, the rate inclusive of necessary G.I screw, Rubber, Aluminum washer with necessary adhesive flashing tap fixed directly over the galvalume sheet, labour charges for fixing, conveyance loading, unloading and cutting, etc. complete.,

Supplying and fixing in position 100mm x 50mm x9.4 kg channel for the face of RAT GUARD EDGING SLAB with MS bolts 16mm dis 45cm long at 2m centres forming projection to the loading platform finishing in flush with the slab with C.M 1:3 (one cement and three sand) etc., complete including painting the exposed surface of MS channel with coats of ANTI CORROSIVE METALLIC NUT BROWN COLOUR PAINT over one coat red oxide primer etc., comple ( The required quantities of MS channel will be supplied departmentally and cost

PLASTERING with cement mortor 1:5 (one cement and five M sand) 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc., complete complying with standard specification.

Plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshade, facia, canopy slab, staircase waist slab, landing slab etc., with cement mortar 1:3 (one cement and three sand) 10mm thick including hacking the surfaces, providing cement mortar nosing beading for sunshades, staircases, steps, landing slabs and curing etc., in all floors complying with standard specification and as directed by the departmental officers.

Renewing the broken glass panes of 4mm thick with new glass panes of 4mm thick of approved quality including fixing in position with TW beading all round the glass panes with nails etc., complete complying with standard specification and as directed by the departmental officers

Painting two coats of plastered wall surface with ready mixed plastic emulsion paint of first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

White washing Two coat with freshly burnt white shell lime in all floors including cost of shell lime, blue powder fevicol type gum, brushes scaffolding charges etc., etc., complete complying with standard specification and as directed by the departmental officers. godown

Supplying and fixing of M.S.iron grill gate using necessary m.s.angles/m.s.flats which should be fixed to gate as per design furnished by the departmental officers including cost of one coat of primer paint, all labour charges for cutting, welding and fixing in position etc., complete complying with standard specification

Painting old iron works such as steel doors, windows, ventilators, windows bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over one coat of red oxide priming coat in all floors including cost of priming coat etc., ( The make, quality and colour of paint should be got approved by the Executive Engineer before use on works).

supply and filling in basement with wet mix 250mm thick in layers not exceeding 250mm thick well watering ramming and consolidation including machineries for higher and running charges leader 5 cum capacity hire charges for tipper water sprinkler vibtory roller etc complete and all labour charges as directed by th departmental officers. (Average Thickenss

Sri Sivasakthi Associates

PSK Constructions

SRI BHANNARI AMMAN BUILDERS

KJS CONSTRUCTION

Sri Balaji Constructions