REPAIR, RECANNING, POLISHING PAINTING AND REPLACEMENT OF VARIOUS PARTS OF WOODEN FURNITURE OF MD ACCN AT UMROI MIL STN UNDER GE UMROI

Amount

Repair of Almirah mess utencils includes following items (refer Drg No.FD-93), work will be carried out at verious places in station, if required or as directed by Engineer in charge:

Supply & Fix of top made of commercial block board 18/19mm BWR grade over paste sunmica 1mm thick fixed in position of Almirah Mess utencils including removing of existing unserviceable Top all as specified and shown on drg or as directed by Engr-in-Charge.

Supply & Fix new sides made of commercial block board18/19mm BWR grade fixed in position of Almirah Mess utencils including removing of old existing unserviceable sides complete all as specified and shown on drg or as directed by Engr in Charge.

Material & Labour for removing of old existing unserviceable ply wood from back side of Almirah Mess utencils complete and replacing the same with new 6mm thick commercial ply wood BWR grade fixed in the same position of Almirah Mess utencils complete all as specified and shown on drawing or as directed by Engr in Charge.

Supply & Fix new door shutter (Single leaf ) made of commercial ply 18/19mm BWR grade fixed in position of Almirah Mess utencils including removing of old existing unserviceable door shutter and complete all as specified and shown on drg or as directed by Engr in Charge.

Material & Labour for removing of old existing unserviceable shelves of Almirah Mess utencils and replacing the same with new shelves as per existing size and shape complete all as specified and shown on drg or as directed by Engr in Charge.

Supply & Fix new aluminium alloy handles fixed in the position of size 100mm including removing of old existing unserviceable aluminium alloy handle complete all as specified and shown on drg or as directed by Engr in Charge.

Supply & Fix new hasp & stapples including removing of old existing unserviceable hasp and staples and complete all as specified and shown on drg or.as directed by Engr in Charge

Material & Labour for removing & scrubbing of old polish by sand/emery paper and prepairing all the surfaces as smooth and repolish the same with high gloss french polish all as specified & shown on drg or as directed by Engr-in-Charge.

Repair of Bed Ply Wood Top includes following items (refer Drg No. FD-246): work will be carried out at verious places in station, if required or as directed by Engineer in charge:

Supply & Fix of new long rail made out of 1st Class hard teak wood well seasoned free from cracks & dead knots incl tightening the whole frame including removing of existing unserviceable long rail all as specified & shown on drg or as directed by Engr-in-Charge.

Supply & Fix new plywood 4mm thick one side teak face other side commercial ISI mark BWR grade including covered with 12mm thick half cut beading both side of head board of Bed hard including removing of existing unserviceable ply wood from existing head board of Bed hard all as specified and shown on drg or as directed by Engr-in-Charge..

Supply & Fix new plywood 4mm thick one side teak face other side commercial ISI mark BWR grade including with 12mm thick half cut covered with beading both side of foot board of Bed hard including removing of existing unserviceable ply wood from existing foot board of Bed hard all as specified and shown on drg or as directed by Engr-in-Charge..

Supply & Fix new plywood top 12mm thick commercial BWR grade ISI marked confirming to IS-303 including removing of existing unserviceable plywood top all as specified and shown on drg or as directed by Engr-in-Charge..

Supply & Fix of new bottom rail made out of 2nd Class hard teak wood well seasoned free from cracks & dead knots including removing of existing unserviceable bottom rail all as specified & shown on drg or as directed by Engr-in-Charge.

Supply & Fix of new legs of head board made out of 1st Class hard teak wood well seasoned free from cracks & dead knots including removing of existing unserviceable legs of head board all as specified & shown on drg or as directed by Engr-in-Charge.

Supply & Fix of new legs of foot board made out of 1st Class hard teak wood well seasoned free from cracks & dead knots including removing of existing unserviceable legs of foot board all as specified & shown on drg or as directed by Engr-in-Charge.

Supply & Fix of new corner cleats made out of 1st Class hard teak wood well seasoned free from cracks & dead knots including removing of existing unserviceable corner cleats and all as specified & shown on drg or as directed by Engr-in-Charge.

Material & Labour for removing & scrubbing of old polish by sand/emery paper and prepairing new and old surfaces of bed ply wood top as smooth and repolish the same with high gloss french polish all as specified & shown on drg or as directed by Engr-in-Charge.

Repair of Bin soiled lilen includes following items (refer Drg No. FD-212/FD-244): Work will be carried out at verious places in station, if required or as directed by Engineer in charge:

Supply & Fix of top made of 6mm thick plywood with teak veneer fixed in position of Bin soiled linen including removing of existing unserviceable Top all as specified and shown on drg or as directed by Engr-in-Charge.

Material & Labour for removing of old existing unserviceable ply wood from front side of Bin soiled linen complete and replacing the same with new 6 mm thick ply wood with teak veeneer fixed in the same position of Bin soiled linen complete all as specified and shown on drawing or as directed by Engr in Charge.

Material & Labour for removing of old existing unserviceable ply wood from back side of Bin soiled linen complete and replacing the same with new 6 mm thick ply wood with teak veeneer fixed in the same position of Bin soiled linen complete all as specified and shown on drawing or as directed by Engr in Charge.

Removing of existing unserviceable cane both side from Bin soiled linen and reweaving the same with new cane plastic 2mm half round in godrej pattern and providing 4mm wide border complete all as specified & shown on drg or as directed by Engr-in-Charge.

Material & Labour for removing & scrubbing of old polish by sand/emery paper and prepairing new and old surfaces of Bin Soiled Linen as smooth and repolish the same with high gloss french polish all as specified & shown on drg or as directed by Engr-in-Charge.

Repair of Chair Dining Offrs includes following items (refer Drg No. FD/MAP/II/04): work will be carried out at verious places in station, if required or as directed by Engineer in charge:

Supply & Fix of new rail made out of 1st Class hard teak wood well seasoned free from cracks & dead knots incl tightening the whole frame and removing existing unserviceable rail all as specified & shown on drg or as directed by Engr-in-Charge.

Supply & Fix of new front legs made out of 1st Class hard teak wood well seasoned free from cracks & dead knots and removing existing unserviceable front legs all as specified & shown on drg or as directed by Engr-in-Charge.

Supply & Fix of new rear legs made out of 1st Class hard teak wood well seasoned free from cracks & dead knots and removing existing unserviceable rear legs all as specified & shown on drg or as directed by Engr-in-Charge.

Supply & Fix of new stiffener made out of 1st Class hard teak wood well seasoned free from cracks & dead knots and removing existing unserviceable stiffener all as specified & shown on drg or as directed by Engr-in-Charge.

Supply & Fix of new back rest made out of 1st Class hard teak wood well seasoned free from cracks & dead knots and removing existing unserviceable back rest all as specified & shown on drg or as directed by Engr-in-Charge.

Removing of old existing unserviceable cushion foam with cover existing size and Supply & Fix new cushion foam sheet 75mm thick and having 40 density duly covered with tapestry cloth not less than Rs.350/- per meter febric fitted on 12mm thick commercial plywood BWR grade of existing size all as specified and shown on drg or.as directed by Engr in Charge. Make :- Sleepwell/Kurlon/Godrej/ISI Marked

Replacement of unserviceable shoe with new PVC/hard rubber shoe complete all as specified & shown on drg or as directed by Engr-in-Charge.

Material & Labour for removing & scrubbing of old polish by sand/emery paper and prepairing old and new surfaces of chair dining as smooth and repolish the same with high gloss french polish all as specified & shown on drg or as directed by Engr-in-Charge.

Repair of Hat Stand with Mirror includes following items (refer Drg No.FD 233/FD-361/FD-362): work will be carried out at verious places in station, if required or as directed by Engineer in charge:

Material & Labour for removing of old existing UNSV ply wood from hat stand complete and replacing the same with new 6 mm thick teak face ply wood BWR grade fixed in the same position of Hat stand complete all as specified and shown on drawing or as directed by Engr in Charge.

Material & Labour for removing of old existing UNSV peg set of hat stand and replacing the same with new peg set in the same position of hat stand complete all as specified and shown on drawing or as directed by Engr in Charge.

Material & Labour for removing of old existing UNSV MS key plate of hat stand and replacing the same with new MS Key plate fixed in the same position of Hat stand complete all as specified and shown on drawing or as directed by Engr in Charge..

Material & Labour for removing of old existing UNSV defaced looking mirror of Hat stand complete and replacing the same with new looking mirror fixed in the same position of Hat stand complete all as specified and shown on drawing or as directed by Engr in Charge..

Material & Labour for removing & scrubbing of old polish by sand/emery paper and prepairing all the surfaces as smooth and repolish the same with high gloss french polish all as specified & shown on drg or as directed by Engr-in-Charge.

Repair of Side board includes following items (refer Drg No. FD-241/FD-371/FD-1112): work will be carried out at verious places in station, if required or as directed by Engineer in charge:

Supply & Fix of new top of Side board made out of block board 18/19mm thick over paste sunmica 1mm thick including removing of existing unserviceable Top all as specified and shown on drg or as directed by Engr-in-Charge..

Supply & Fix of new sides of side board made out of block board 18/19 mm thick over paste 4mm thick teak face veneer including removing of existing unserviceable side all as specified and shown on drg or as directed by Engr-in-Charge..

Supply & Fix of new back of side board made of commercial ply wood 6 mm thick conforming to IS: 303 BWR grade including Removing of existing unserviceable back Ply wood all as specified and shown on drg or as directed by Engr-in-Charge.

Supply & Fix of new drawer complete made out of 1st Class hard teak wood well seasoned free from cracks & dead knots incl lower ply of drawer including removing of existing unserviceable drawer complete all as specified & shown on drg or as directed by Engr-in-Charge.

Supply and fix in replacement of chromium plated knobe complete all as specified & shown on drg or as directed by Engr-in-Charge..

Supply & Fix of new door shutter made out of Pre laminated Particle board 18/19 mm thick one side teak face other side white exterior grade incl 4 mm thick beading all round including removing of existing unserviceable door shutter of Side board all as specified and shown on drg or as directed by Engr-in-Charge..

Material & Labour for Bottom frame including legs made out of 1st class hard teak wood free from crack & dead knots where reqd and removing existing all as specified and shown on drg or as directed by Engr-in-Charge.

Material & Labour for removing & scrubbing of old polish by sand/emery paper and prepairing old and new surfaces of side board as smooth and repolish the same with high gloss french polish all as specified & shown on drg or as directed by Engr-in-Charge.

Repair of Sofa Set 5 Seater/4 seater includes following items (refer Drg No. FD-281 And FD-373), work will be carried out at verious places in station, if required or as directed by Engineer in charge:

Removing old existing unserviceable cushion cover 21" x 22" x 4" and Supply & Fix new cushion cover made out of approved quality tapestry cloth not less than Rs.350/- per meter duly stitched with fine standard thread and providing best quality chain with runner on one side all as specified and shown on drg or as directed by Engr in Charge.

Removing of old existing unserviceable cushion foam with cover 21" x 22" x 4'' and Supply & Fix new cushion foam sheet 100 mm thick and having 40 density duly covered with tapestry cloth not less than Rs.350/- per meter duly stitched with fine standard thread and providing best quality chain with runner on one side all as specified and shown on drg or.as directed by Engr in Charge .Make :- Sleepwell/Kurlon/Godrej/ISI Marked

Supply & Fix of long rail made out of 1st Class hard teak wood well seasoned free from cracks & dead knots incl tightening the whole frame and removing of old unserviceable long rail all as specified & shown on drg or as directed by Engr-in-Charge.

Supply & Fix of new legs made out of 1st Class hard teak wood well seasoned free from cracks & dead knots incl tightening the whole frame and removing old unserviceable legs all as specified & shown on drg or as directed by Engr-in-Charge.

Supply & Fix of new batten strips made out of 1st Class hard teak wood well seasoned free from cracks & dead knots incl tightening the whole frame and removing old unserviceable batten strips all as specified & shown on drg or as directed by Engr-in-Charge.

Supply & Fix of new arm rest made out of 1st Class hard teak wood well seasoned free from cracks & dead knots incl tightening the whole frame and removing old existing arm rest all as specified & shown on drg or as directed by Engr-in-Charge.

Material & Labour for removing & scrubbing of old polish of sofa set 5 seater by sand/emery paper and prepairing all the surfaces as smooth and repolish the same with high gloss french polish all as specified & shown on drg or as directed by Engr-in-Charge.

Material & Labour for removing & scrubbing of old polish of sofa set 4 seater by sand/emery paper and prepairing all the surfaces as smooth and repolish the same with high gloss french polish all as specified & shown on drg or as directed by Engr-in-Charge.

Repair of Table Dressing Ladies with Mirror includes following items (refer Drg No.FD-32/FD-251): work will be carried out at verious places in station, if required or as directed by Engineer in charge:

Supply and fix looking mirror of existing size with frame of hardwood and back with commercial 6 mm thick plywood conforming to IS: 303 BWR grade on the back of mirror including removal of old mirror all as specified and shown on drg or as directed by Engr in Charge.

Supply & Fix new drawer made out of 1st Class hard teak wood well seasoned providing the lower ply 6mm thick including chromium plated knob including removing of existing unserviceable drawer complete all as specified and shown on drg or as directed by Engr-in-Charge.

Supply & Fix of new top of table dressing ladies made of block board 18/19mm thick over paste of laminated sunmica shee 1mm thick including removing of existing unserviceable Top all as specified and shown on drg or as directed by Engr-in-Charge.

Supply & Fix new chromium plated knob including removing of existing unserviceable chromium plated knob complete all as specified and shown on drg or as directed by Engr-in-Charge.

Supply & Fix of new bottom frame including legs of table dressing ladies of existing unserviceable bottom frame including legs all as specified and shown on drg or as directed by Engr-in-Charge.

Material & Labour for removing & scrubbing of old polish by sand/emery paper and prepairing old and new surfaces of table dressing as smooth and repolish the same with high gloss french polish all as specified & shown on drg or as directed by Engr-in-Charge.

Repair of Table Dressing Gents includes following items (refer Drg No.FD-230/FD-379): work will be carried out at verious places in station, if required or as directed by Engineer in charge:

Removing of existing unserviceable/ defacted looking mirror of existing size and providing new looking mirror of same size duly framed with hard teak wood and including replacement of ply wood with new commercial 6 mm thick plywood conforming to IS: 303 BWR grade on the back of mirror all as specified and shown on drg or.as directed by Engr in Charge.

Supply & Fix new top of table dressing gents made of commercial ply wood 12 mm thick conforming to IS: 303 BWR grade including over paste of laminated sunmica 1mm thick and removing of existing unserviceable ply & sunmica all as specified and shown on drg or.as directed by Engr in Charge.

Supply & Fix new drawer made out of plywood commercial 12mm thick over paste of laminated sunmica sheet 1mm thick including providing the lower ply 6mm thick and chromium plated knob including removing of existing unserviceable drawer complete all as specified and shown on drg or as directed by Engr-in-Charge.

Supply and fix in replacement of chromium plated knobe complete all as specified & shown on drg or as directed by Engr-in-Charge.

Supply and fix in replacement of MS key plate complete all as specified & shown on drg or as directed by Engr-in-Charge.

Material & Labour for removing & scrubbing of old polish by sand/emery paper and prepairing old and new surfaces of table dressing as smooth and repolish the same with high gloss french polish all as specified & shown on drg or as directed by Engr-in-Charge.

Repair of Stool Dressing includes following items (refer Drg. No. FD-27/FD-252/FD-282): work will be carried out at verious places in station, if required or as directed by Engineer in charge:

Supply & Fix in repair of legs made out of 1st class hard teak wood well seasoned free from cracks & dead knots incl tightening the whole frame and removing of existing unserviceable legs all as specified & shown on drg or as directed by Engr-in-Charge.

Supply & Fix short rail made out of 1st Class hard teak wood well seasoned free from cracks & dead knots and removing of existing unserviceable short rail all as specified & shown on drg or as directed by Engr-in-Charge.

Supply and fix long rail made out of 1st Class hard teak wood well seasoned free from cracks & dead knots and removing of existing unserviceable long rail all as specified & shown on drg or as directed by Engr-in-Charge.

Supply & Fix stiffener made out of 1st Class hard teak wood well seasoned free from cracks & dead knots and removing of existing unserviceable stiffener all as specified & shown on drg or as directed by Engr-in-Charge.

Removing existing unserviceable cane from stool dressing CB and reweaving the same with new cane plastic 2mm half round of Shah/Premier make godrej pattern and providing 4 mm wide border complete all as specified & shown on drg or as directed by Engr-in-Charge.

Material & Labour for removing & scrubbing of old polish by sand/emery paper and prepairing old and new surfaces of Stool Dressing as smooth and repolish the same with high gloss french polish all as specified & shown on drg or as directed by Engr-in-Charge.

Repair of Table Bed side (MAP) includes following items (refer Drg. No. FD-E6/MAP/15®): Work will be carried out at verious places in station, if required or as directed by Engineer in charge:

Supply & Fix top made of Pre laminated Particle board 18/19 mm thick one side teak face other side white exterior grade incl providing 6mm thick hard teak wood beading all round including removing of existing UNSV Top all as specified and shown on drg or as directed by Engr-in-Charge.

Supply and fix in replacement of chromium plated handle if existing shape and size complete all as specified & shown on drg or as directed by Engr-in-Charge..

Supply & Fix new drawer made of commercial plywood 12mm thick BWR grade and front side pannel shall be made out of Pre-laminated Particle board 18/19 mm thick one side teak face exterior grade & bottomg side shall be applied of existing size of commercial plywood 6mm thick and also removing of existing unserviceable drawer complete all as specified and shown on drg or as directed by Engr-in-Charge.

Supply and fix in replacement of rubber shoe of existing shape and size complete all as specified & shown on drg or as directed by Engr-in-Charge..

Material & Labour for removing & scrubbing of old polish by sand/emery paper and prepairing old and new surfaces of Table bed side (MAP) as smooth and repolish the same with high gloss french polish all as specified & shown on drg or as directed by Engr-in-Charge.

Chair writing Steel includes following items (Refer Drg No. FD/E6/MAP/12): work will be carried out at verious places in station, if required or as directed by Engineer in charge:

M&L for removing existing UNSV seat and back with foam cushion incl tapestry cloth and S&F the same of chair writing steel all as specified and shown on drawing or as directed by Engr-in-charge ..

M&L for removing existing UNSV set of arm rest and S&F new arm rest set of chair writing steel all as specified and shown on drawing or as directed by Engr-in-charge ..

Material & Labour for removing paints by cutting/scrubbing from chair writing steel and contineous gas welding to the broken parts where reqd after preparing the entire frame repaint the chair with two coats of synthetic enamel paint white all as specified and shown on drawing or as directed by Engr-in-charge .

Repair of Chair Computer includes following items (Refer Drg No. FD/E6/MAP/01) : work will be carried out at verious places in station, if required or as directed by Engineer in charge:

Supply & Fix base legs of chair computer including removing existing base legs and all as specified and shown on drawing or as directed by Engr-in-charge.

Supply & Fix ball couster 50mm in base of chair computer including removing existing ball couster and all as specified and shown on drawing or as directed by Engr-in-charge.

Supply & Fix seat and back incl tapestry cloth of chair computer including removal of existing all as specified and shown on drawing or as directed by Engr-in-charge.

Supply & Fix new set of arm rest of chair computer including removing existing unserviceable set of arm rest arm rest and all as specified and shown on drawing or as directed by Engr-in-charge.

Supply & Fix new up down piston assy with cover of chair computer including removing existing unserviceable updown piston assy with cover and all as specified and shown on drawing or as directed by Engr-in-charge.

Material & Labour for removing paints by cutting/scrubbing from chair computer and contineous gas welding to the broken parts where reqd after preparing the entire frame repaint the chair with two coats of synthetic enamel paint white all as specified and shown on drawing or as directed by Engr-in-charge.

Repair of Dressing Mirror gents (MAP) includes following items (Refer Drg No. FD-E6/MAP/16), Work will be carried out at verious places in station, if required or as directed by Engineer in charge:

Supply and fix looking mirror of size 1200 x 600 x 5.5 mm thick with existing beading where as required made out of 1st Class hard teak wood well seasoned free from cracks & dead knots including removing of existing mirror including removal of old mirror all as specified and shown on drg or as directed by Engr in Charge.

Supply & Fix of new 5.5mm thick movable glass shelves including removing of existing unserviceable glass complete all as specified and shown on drg or as directed by Engr-in-Charge.

Supply & Fix new Megnatic catcher including removing of existing unserviceable megnatic catcher complete all as specified and shown on drg or as directed by Engr-in-Charge.

Supply & Fix new plywood back side 12 mm thick commercial BWR grade ISI marked confirming to IS-303 including removing of existing unserviceable plywood top all as specified and shown on drg or as directed by Engr-in-Charge..

Material & Labour for removing & scrubbing of old polish by sand/emery paper and prepairing new and old surfaces of dressing mirror gents as smooth and repolish the same with high gloss french polish all as specified & shown on drg or as directed by Engr-in-Charge.

Repair of Peg Table includes following items (refer Drg No.FD-236/FD-277/FD-384): work will be carried out at verious places in station, if required or as directed by Engineer in charge:

Supply & Fix of new top made of Pre laminated Particle board 18/19 mm thick one side teak face other side white exterior grade incl providing 6mm thick hard teak wood beading all round including removing of existing unserviceable Top all as specified and shown on drg or as directed by Engr-in-Charge.

Supply & Fix of new legs made out of 1st Class hard teak wood well seasoned free from cracks & dead knots incl tightening the whole frame including removing of existing unserviceable legs all as specified & shown on drg or as directed by Engr-in-Charge.

Supply & Fix of new long rail made out of 1st Class hard teak wood well seasoned free from cracks & dead knots incl tightening the whole frame including removing of existing unserviceable long rail all as specified & shown on drg or as directed by Engr-in-Charge.

Supply and fix in Replacement of unserviceable shoe with new PVC / hard rubber shoe complete all as specified and shown on drg or.as directed by Engr in Charge.

Material & Labour for removing & scrubbing of old polish by sand/emery paper and prepairing old and new surfaces of Peg table as smooth and repolish the same with high gloss french polish all as specified & shown on drg or as directed by Engr-in-Charge.

Repair of Table Writing includes following items (refer Drg No. FD-33/FD-249/FD-275): work will be carried out at verious places in station, if required or as directed by Engineer in charge:

Supply & Fix of new top made of Pre laminated Particle board 18/19 mm thick one side teak face other side white exterior grade incl providing 6mm thick hard teak wood beading all round including removing of existing unserviceable Top and complete all as specified and shown on drg or as directed by Engr-in-Charge.

Supply & Fix of new legs made out of 1st Class hard teak wood well seasoned free from cracks & dead knots incl tightening the whole frame including removing of existing unserviceable legs and all as specified & shown on drg or as directed by Engr-in-Charge.

Supply & Fix the side ply of box of 6mm thick one side teak face and other side commercial for table writing including removing of old existing side ply of box and all as specified and shown on drg or as directed by Engr-in-Charge.

Supply & Fix of new stiffener made out of 1st Class hard teak wood well seasoned free from cracks & dead knots including removing of existing unserviceable stiffener and all as specified & shown on drg or as directed by Engr-in-Charge.

Supply & Fix of new door shutter of box made of Pre laminated Particle board 18/19 mm thick one side teak face other side white exterior grade incl 6mm thick beading all round including removing of existing unserviceable door shutter of table writing and all as specified and shown on drg.or as directed by Engr-in-Charge.

Supply & Fix new locks 6 lever 50mm including removing of existing unserviceable locks from drawer and all as specified and shown on drg or as directed by Engr-in-Charge.

Supply and fix in replacement of chromium plated knobe complete all as specified & shown on drg or as directed by Engr-in-Charge..

Supply and fix in Replacement of unserviceable shoe with new PVC / hard rubber shoe complete all as specified and shown on drg or.as directed by Engr in Charge.

Material & Labour for removing & scrubbing of old polish by sand/emery paper and prepairing old and new surfaces of table writing as smooth and repolish the same with high gloss french polish all as specified & shown on drg or as directed by Engr-in-Charge.

Repair of Table Dining (4'x3')/6/8 Persons includes following items (refer Drg No.FD-273/FD-239/FD-1115/FD-30(M)/FD-MAP-II/03): work will be carried out at verious places in station, if required or as directed by Engineer in charge:

Supply & Fix of new top of table dining 8 person made of Pre laminated Particle board 18/19 mm thick one side teak face other side white exterior grade incl providing 6mm thick hard teak wood beading all round including removing of existing unserviceable Top all as specified and shown on drg or as directed by Engr-in-Charge.

Supply & Fix of new top of table dining 6 person made of Pre laminated Particle board 18/19 mm thick one side teak face other side white exterior grade incl providing 6mm thick hard teak wood beading all round including removing of existing unserviceable Top all as specified and shown on drg or as directed by Engr-in-Charge.

Supply & Fix of new top of table dining 4'x3' made of Pre laminated Particle board 18/19 mm thick one side teak face other side white exterior grade incl providing 6mm thick hard teak wood beading all round including removing of existing unserviceable Top all as specified and shown on drg or as directed by Engr-in-Charge.

Supply & Fix of new legs made out of 1st Class hard teak wood well seasoned free from cracks & dead knots incl tightening the whole frame including removing of existing unserviceable legs all as specified & shown on drg or as directed by Engr-in-Charge.

Supply & Fix of new long rail of table dining 8 person made out of 1st Class hard teak wood well seasoned free from cracks & dead knots incl tightening the whole frame including removing of existing unserviceable long rail all as specified & shown on drg or as directed by Engr-in-Charge.

Supply & Fix of new long rail of table dining 6 person made out of 1st Class hard teak wood well seasoned free from cracks & dead knots incl tightening the whole frame including removing of existing unserviceable long rail all as specified & shown on drg or as directed by Engr-in-Charge.

Supply & Fix of new long rail of table dining 4'x3' made out of 1st Class hard teak wood well seasoned free from cracks & dead knots incl tightening the whole frame including removing of existing unserviceable long rail all as specified & shown on drg or as directed by Engr-in-Charge.

Supply & Fix of new short rail of table dining(4'x3')/6/8 person made out of 1st Class hard teak wood well seasoned free from cracks & dead knots incl tightening the whole frame including removing of existing unserviceable short rail all as specified & shown on drg or as directed by Engr-in-Charge.

Supply & Fix of new corner cleats made out of 1st Class hard teak wood well seasoned free from cracks & dead knots including removing of existing unserviceable corner cleats all as specified & shown on drg or as directed by Engr-in-Charge.

Supply and fix in Replacement of unserviceable shoe with new PVC/hard rubber shoe complete all as specified and shown on drg or as directed by Engr in Charge.

Material & Labour for removing & scrubbing of old polish by sand/emery paper and prepairing old and new surfaces of table dinning (4'x3')/6/8 persons as smooth and repolish the same with high gloss french polish all as specified & shown on drg or as directed by Engr-in-Charge.

Repair of Table Centre includes following items (refer Drg No.FD-274 & FD-235 ): Work will be carried out at verious places in station, if required or as directed by Engineer in charge:

Supply & Fix of new top made of Pre laminated Particle board 18/19 mm thick one side teak face other side white exterior grade incl providing 6mm thick hard teak wood beading all round including removing of existing unserviceable Top all as specified and shown on drg or as directed by Engr-in-Charge.

Supply & Fix of new legs made out of 1st Class hard teak wood well seasoned free from cracks & dead knots incl tightening the whole frame including removing of existing unserviceable legs all as specified & shown on drg or as directed by Engr-in-Charge.

Supply & Fix of new long rail made out of 1st Class hard teak wood well seasoned free from cracks & dead knots incl tightening the whole frame including removing of existing unserviceable long rail all as specified & shown on drg or as directed by Engr-in-Charge.

Supply & Fix of new short rail made out of 1st Class hard teak wood well seasoned free from cracks & dead knots incl tightening the whole frame including removing of existing unserviceable short rail all as specified & shown on drg or as directed by Engr-in-Charge.

Supply and fix in Replacement of unserviceable shoe with new PVC/hard rubber shoe complete all as specified and shown on drg or as directed by Engr in Charge.

Material & Labour for removing & scrubbing of old polish by sand/emery paper and prepairing old and new surfaces of table centre as smooth and repolish the same with high gloss french polish all as specified & shown on drg or as directed by Engr-in-Charge.

Repair of Table Computer includes following items (refer Drg No.FD/E6/MAP/03): Work will be carried out at verious places in station, if required or as directed by Engineer in charge:

Supply & Fix top made of Pre laminated Particle board 18/19 mm thick one side teak face other side white exterior grade incl providing 6mm thick hard teak wood beading all round including removing of existing UNSV Top all as specified and shown on drg or as directed by Engr-in-Charge.

Supply & Fix pull out tray made out of Pre laminated Particle board 18/19 mm thick one side teak face other side white exterior grade incl providing 6mm thick hard teak wood beading all round including removing existing pullout tray on telescopic channel all as specified and shown on drg or as directed by Engr-in-Charge.

Supply and fix in replacement of chromium plated knobe complete all as specified & shown on drg or as directed by Engr-in-Charge..

Supply & Fix new drawer made of Pre laminated Particle board 18/19 mm thick one side teak face other side white exterior grade incl providing 6mm thick hard teak wood beadingand chromium plated knob including removing of existing unserviceable drawer complete all as specified and shown on drg or as directed by Engr-in-Charge.

Supply & Fix drawer on telescopic channel made out of Pre laminated Particle board 18/19 mm thick one side teak face other side white exterior grade incl providing 6mm thick hard teak wood beading all round including removing existing drawer on telescopic channel and all as specified and shown on drg or as directed by Engr-in-Charge.

Supply and fix in replacement of existing PVC cover for MS pipe complete all as specified & shown on drg or as directed by Engr-in-Charge..

Material & Labour for removing & scrubbing of old polish by sand/emery paper and prepairing old and new surfaces of table computer as smooth and repolish the same with high gloss french polish all as specified & shown on drg or as directed by Engr-in-Charge.

Repair of Table Dressing Ladies with Mirror & Stool (MAP) includes following items(refer Drg No.FD/MAP-II/07): work will be carried out at verious places in station, if required or as directed by Engineer in charge:

Supply and fix looking mirror of existing size with frame of hardwood and back with commercial 6 mm thick plywood conforming to IS: 303 BWR grade on the back of mirror including removal of old mirror all as specified and shown on drg or as directed by Engr in Charge.

Supply & Fix new drawer made out of pre-laminated particle board, providing in lower side ply 6mm thick and fixed with the telescopic channed including chromium plated handle of exising shape and size including removing of existing unserviceable drawer complete all as specified and shown on drg or as directed by Engr-in-Charge.

Supply & Fix of new batten frame at bottom side made out of 1st class hard wood in table dressing ladies including making of level in bottom side all as specified and shown on drg or as directed by Engr-in-Charge.

Supply and fix of existing shape and size CP handle including removing of old unserviceable Cp handle complete all as specified and shown on drg or as directed by Engr in Charge.

Supply & Fix of new decorative beading all around of table dressing ladies including removing of existing unserviceable Top all as specified and shown on drg or as directed by Engr-in-Charge.

Supply and fix of existing PVC hard shoe including removing of old unserviceable shoe complete all as specified and shown on drg or as directed by Engr in Charge.

Material & Labour for removing & scrubbing of old polish by sand/emery paper and prepairing old and new surfaces of table dressing as smooth and repolish the same with high gloss french polish all as specified & shown on drg or as directed by Engr-in-Charge.

Schedule of Credit

M/S KHAN ELECTRICAL