Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.9 LAccepted-AOC B 22 152 STREET NO 1 14 BABA FARID NAGAR BATHINDA 151001 | BATHINDA | PUNJAB | 151001 | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹37.7 L+₹5.9 L (18.7%)Rejected-Finance | L2 | Rejected-Finance High Rate Quoted | |
| 3 | L3₹41.2 L+₹9.5 L (29.8%)Rejected-Finance OPPOSITE RADIO STATION TOWER TILAK NAGAR SAGAR ROAD BIKANER 334001 RAJASTHAN | BIKANER | RAJASTHAN | 334001 | L3 | Rejected-Finance High Rate Quoted |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
12 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Col Shery Goel, CWE Bikaner
HQ CWE Bikaner, Bikaner Mil Stn
Repair to sewage line and cleaning of septic tanks, soakage well, chamber repair and cover under AGE B/R-I and ASCON Node for Zone A under AGE B/R-I at Mil Stn Bikaner under GE (N) Bikaner
2023_MES_628247_1
CA No CWE BKN-Token No. 49/2023-2024
Open Tender
Civil Works
Item Rate
270 days
GE N BIKANER
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Yes
GE (N) Bikaner
₹90,000
Yes
24 Jan 2024
14 Nov 2023
19 Dec 2023
14 Nov 2023
12 Dec 2023
28 Nov 2023
14 Nov 2023 - 18 Nov 2023
Amount
Note : The scope of work is day to day maintenance nature/ requirement of works. Contractor shall attend the office of AGE B/R on daily basis and receive / collect the complaints /requirements of work and shall rectify the repair / maintenance work within time given below. (i) Sewage repair - 24 hours (ii) Minor Plumbing / Sanitary complaints - 48 Hours (iii) Major Sewage/ Plumbing / Sanitary complaints - 15 Days The contractor/his rep will collect the complaint from complaint cell every day at 9.00 AM and rectify the complaints. If the contractor fails to rectify the complaints with materials / items to be replacement if required as mentioned in the complaint time, he will be charged 50% quoted rates by the contractor and the same will be recovered from his RAR.
Demolition of reinforced cement concrete of any description and in any position (reinforcement cut as required to facilitate demolition) not otherwise specifically provided for in this schedule, complete all as specified & as directed.
Demolition of unreinforced cement concrete of any description and in any position (not otherwise specifically provided for in this Schedule, complete all as specified & as directed.
Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.
Brick bats filling the manhole/ soakage well area to used for filling obtained from serial item No. 4.00 here-in-before complete all as specified and as directed.
Taking down cement plaster or cement lime plaster, terrazo etc on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc, complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as specified and as directed.
Dismantling of stone slabs in roofs, suspended floors, chajjas, landings, etc., any description, any thickness, jointed in any mortar, complete all as specified & as directed.
Excavating in trenches, not exc 1.5 metre wide and not exc 1.5 metre in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. laying cables, pipes, etc. not exc 10 Sqm on plan & not exc 1.5m in depth and getting out in soft/loose soil complete all as specified and as directed.
Excavating in trenches, not exc 1.5 metre wide and exc 1.5 metre but not exc 3.0 metre in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. laying cables, pipes, etc. not exc 10 Sqm on plan & not exc 1.5m in depth and getting out in soft/loose soil complete all as specified and as directed.
Excavation over area, not exc 1.5 metre in depth and getting out in soft/loose soil complete all as specified and as directed.
Excavation over area, exc 1.5 metre but not exc 3.0 metre in depth and getting out in soft/loose soil complete all as specified and as directed.
Excavation over area, exc 3.0 metre but not exc 4.5 metre in depth and getting out in soft/loose soil complete all as specified and as directed.
Excavation over area, exc 4.5 metre but not exc 6.0 metre in depth and getting out in soft/loose soil complete all as specified and as directed.
Excavation over area, exc 6.0 metre but not exc 7.5 metre in depth and getting out in soft/loose soil complete all as specified and as directed.
Excavation over area, exc 7.5 metre but not exc 9.0 metre in depth and getting out in soft/loose soil complete all as specified and as directed.
Returning, filling in, including spreading, leveling watering and well ramming in layers not exc 25 cm thick in soft/loose soil complete all as specified and as directed.
Removing excavated soil/material to a distance not exc 50 metre and depositing where directed at a level not exc 1.50 metre above the starting point complete all as specified and as directed.
Removing excavated soil/material to a distance exc 500 metre and depositing where directed at a level not exc 1.50 metre above the starting point complete all as specified and as directed.
M&L for hardcore of broken stone or boulders, gauge not exc. 63mm, deposited, spread and leveled in layers not exc 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.
M&L for PCC 1:5:10 type E2 using 40 mm graded crushed stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed.
M&L for PCC 1:4:8 type D2 using 40 mm graded crushed stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed.
M&L for PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate as in foundations, filling and mass concrete, surface channel and drains complete all as specified and as directed.
M&L for cement concrete (1:2:4) type B1 using 20 mm graded crushed stone aggregate as in surface channels and drains and benching including finishing the top of benching even and smooth using extra cement complete all as specified and as directed.
M&L for cement concrete 1:2:4 type B1, using 20mm graded crushed stone aggregate as in copings, including weathering, slightly rounded, chamfered angle and throating as directed including use and waste of form work (straight or curved) all exposed surface of concrete finished fair complete all as specified & as directed.
M&L for precast RCC 1:2:4 type B1 using 20mm graded crushed stone aggregate as in landings, cover slabs (for man holes, drains etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces including placing in position and set in CM (1:6) complete all as specified & as directed. Note :- Reinforcement shall be measured and paid for separately under respective item of this Schedule.
Supply only liquid water proofing compound (ISI marked) complete all as specified & as directed.
M&L for brick work with old size burnt clay sub-class ‘B’ bricks, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar 1:4 complete all as specified and as directed. Note : Brick work under this item shall be carried out in sewage disposal work (i.e. manholes) and area drainage work (i.e. drains).
M&L for honey comb brick work with old size burnt clay sub-class ‘B’ bricks, for soak well wall built in cement mortar 1:3 complete all as specified and as directed.
M&L for Jodhpur stone roof slabs, self faced 7.5cm to 10cm thick, 25cm to 35cm wide, hoisted and set, jointed and grouted in cement mortar 1:3 complete all as specified & as directed.
M&L for mild steel TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified & as directed.
M&L for 50mm thick PCC (1:3:6) type C1 using 20mm graded crushed stone aggregate as in flooring, leveling course, etc, over stone patti/RCC roof slab, surface finished fair and even, complete all as specified and as directed.
M&L for non skid ceramic tiles (coloured) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and as directed.
M&L for glazed ceramic tiles (coloured) 7mm thick, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm (i.e 450mm x 300mm or as directed), on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick rendering (as screed bed) in cement & sand mortar 1:4 complete all as specified and as directed.
M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick masonry or concrete surfaces of walls, mixed with integral liquid water proofing compound as per manufacturer’s instructions, finished even & smooth without using extra cement, complete all as specified and directed. Note : Supply only integral liquid water proofing compound shall be measured and paid for separately.
M&L for preparation of newly plastered / unplastered surfaces of walls & applying three coats of white wash complete all as specified.
S&F in repairs vitreous china wash down water closet pan (Pedestal pattern), white, including connection to drain (or outgoing pipe) and to flushing pipe, anti-sypohonage pipe etc., with plastic WC seat cover (white) closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device, Jet spray (brass chromium plated of butterfly shape) with 1.00m PTMT tube suitable for 15 mm bore GI pipe with PTMT nut & nipple, complete all as specified & as directed.
S&F in repairs PVC valveless symphonic action type low level flushing cistern (ISI marked) of 10 litre capacity including 32 mm dia PVC flush pipe connected to water closet with inlet, ball valve, float and handle complete all as specified & as directed.
S&F in repairs vitreous china squatting pan (Orissa pattern) water closet (white) of size 550x440mm with integral foot rests, ‘P’ or ‘S’ trap, including connection to trap and flushing pipe, antisyphonage pipe etc, complete all as specified and as directed.
S&F in repairs PVC plastic water closet seat cover, any colour, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified & as directed.
S&F in repairs PVC connection 450 mm long suitable for 15 mm bore GI pipe including PTMT nuts on both sides complete all as specified & as directed.
Supply and fixing 100mm bore cast iron, sand cast, soil, waste & vent pipe (ISI marked), in any length with or without ears fixed with cement joints, laid in trenches or floors, including taking down old unserviceable pipe, complete all as specified and as directed.
Supply and fixing 75mm bore cast iron, sand cast, soil, waste & vent pipe (ISI marked), in any length with or without ears fixed with cement joints, laid in trenches or floors, including taking down old unserviceable pipe, complete all as specified and as directed.
Supply and fixing 100mm bore cast iron, sand cast, soil, waste & vent pipe (ISI marked), in any length with or without ears fixed with cement joints, fixed to walls, including taking down old unserviceable pipe, complete all as specified and as directed.
Supply and fixing 75mm bore cast iron, sand cast, soil, waste & vent pipe (ISI marked), in any length with or without ears fixed with cement joints, fixed to walls, including taking down old unserviceable pipe, complete all as specified and as directed.
Supply and fixing 50mm bore cast iron, sand cast, soil, waste & vent pipe (ISI marked), in any length with or without ears fixed with cement joints, fixed to walls, including taking down old unserviceable pipe, complete all as specified and as directed.
S&F in repairs 100mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) with oval access door complete all as specified & as directed.
S&F in repairs 75mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) with oval access door complete all as specified & as directed.
S&F in repairs cast iron lid to oval access door fitted to 100mm bore cast iron fitting including nuts & bolts as required complete all as specified & as directed.
S&F in repairs cast iron lid to oval access door fitted to 75mm bore cast iron fitting including nuts & bolts as required complete all as specified & as directed.
S&F in repairs 100mm bore cast iron branch piece, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door complete all as specified & as directed.
S&F in repairs 75mm bore cast iron branch piece, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door complete all as specified & as directed.
S&F in repair 100mm bore cast iron branch piece, double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door complete all as specified & as directed.
S&F in repair 75mm bore cast iron branch piece, double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door complete all as specified & as directed.
S&F in repair cast iron vent cowl for 100mm bore CI pipe complete all as specified.
S&F in repair cast iron vent cowl for 75mm bore CI pipe complete all as specified.
S&F in repair cast iron vent cowl for 50mm bore CI pipe complete all as specified.
S&F in repair cast iron sockets (double) collars for 100mm bore CI pipe complete all as specified.
S&F in repair cast iron sockets (double) collars for 75mm bore CI pipe complete all as specified.
S&F in repair 100mm bore cast iron sanitary connection socket to fit WC out let complete all as specified and directed.
S&F stack clamp made out of MS flat 50mm x 5mm and 16 mm dia round iron stays, including bolts & nuts, securing ends of stays to walls or roof for 100mm bore pipe including two coats of synthetic enamel paint over a coat of red oxide primer including preparation of surfaces complete all as specified & as directed.
S&F stack clamp made out of MS flat 50mm x 5mm and 16 mm dia round iron stays, including bolts & nuts, securing ends of stays to walls or roof for 75mm bore pipe including two coats of synthetic enamel paint over a coat of red oxide primer including preparation of surfaces complete all as specified & as directed.
S&F stack clamp made out of MS flat 50mm x 5mm and 16 mm dia round iron stays, including bolts & nuts, securing ends of stays to walls or roof for 50mm bore pipe including two coats of synthetic enamel paint over a coat of red oxide primer including preparation of surfaces complete all as specified & as directed.
S&F as in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. Note :- Excavation & earthwork shall be measured & paid for separately.
S&F as in repair 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. Note :- Excavation & earthwork shall be measured & paid for separately.
S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints / solvent cement joints fixed to walls including taking down old unserviceable pipe complete all as specified & as directed.
S&F 90mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints / solvent cement joints fixed to walls including taking down old unserviceable pipe complete all as specified & as directed.
S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints / solvent cement joints fixed to walls including taking down old unserviceable pipe complete all as specified & as directed.
S&F in repair 110mm bore PVC (SWR) double junction (single 'T' ) equal or unequal provided with solvent cement complete all as specified and directed.
S&F in repair PVC (SWR) floor trap dia of outlet 75mm, with PTMT grating including jointing with solvent cement complete all as specified and directed.
S&F 110mm bore PVC (SWR) bend any redius joint with solvent cement complete all as specified & as directed.
S&F 75mm bore PVC (SWR) bend any redius, joint with solvent cement complete all as specified & as directed.
S&F PVC (SWR) reducers 75-110mm bore joint with solvent cement complete all as specified & as directed.
M&L for salt glazed stone ware gully trap square or round mouthed type 'P' of size 150 x 150 mm with CI grating, setting & jointing with cement with grouting surrounding gully trap with PCC 1:3:6, type C1 block 30x30x45cm together with necessary form work, excavation & earth work in soft/loose soil, complete all as specified and as directed.
M&L for DWCPE pipe 180mm (OD)/163mm (ID) dia, laid in trenches, complete with necessary fittings, laid and jointed on concrete bed complete including earth work, removal, returning filling, jointing and testing, including laid PCC 1:3:6 type C2 using 40mm graded stone aggregates including packing under haunching against sides of pipe laid all as per IS 16098 : 2013 fixed in repair complete all as specified & as directed.
M&L for DWCPE pipe 200mm (OD)/175mm (ID) dia, laid in trenches, complete with necessary fittings, laid and jointed on concrete bed complete including earth work, removal, returning filling, jointing and testing, including laid PCC 1:3:6 type C2 using 40mm graded stone aggregates including packing under haunching against sides of pipe laid all as per IS 16098 : 2013 fixed in repair complete all as specified & as directed.
M&L for 200mm bore reinforced concrete pipe, class NP2, laid and jointed complete with collars, laid and jointed on concrete bed complete including testing, after demolition and breaking up drain pipes set in cement mortar complete all as specified & as directed. Note :- Excavation & earthwork shall be measured and paid separately.
M&L for 150mm bore reinforced concrete pipe, class NP2, laid and jointed complete with collars, laid and jointed on concrete bed complete including testing, after demolition and breaking up drain pipes set in cement mortar complete all as specified & as directed. Note :- Excavation & earthwork shall be measured and paid separately.
S&F salt glazed stone ware drain pipes of 150mm bore, Class ‘SP 2’, ISI marked, laid to slope in trenches, jointed in CM (1:1) and tested complete all as specified and directed. Note :- Excavation & earthwork shall be measured and paid separately.
S&F salt glazed stone ware drain pipes of 200mm bore, Class ‘SP 2’, ISI marked, laid to slope in trenches, jointed in CM (1:1) and tested complete all as specified and directed. Note :- Excavation & earthwork shall be measured and paid separately.
M&L for PCC 1:4:8 type D2 using 40 mm graded crushed stone aggregate in bedding to drain pipes, including packing under and haunching against the sides of pipes after they are laid and tested for 200mm bore pipe complete all as specified and as directed.
M&L for PCC 1:4:8 type D2 using 40 mm graded crushed stone aggregate in bedding to drain pipes, including packing under and haunching against the sides of pipes after they are laid and tested for 150mm bore pipe complete all as specified and as directed.
M&L for SFRC manhole covers with square frame of size 12"x12" thickness 2.50" and cover size 9.25"x9.25" thickness 1.10" with 7.5"x7.5" clear opening fixed including dismentling of old manhole cover slab complete all as specified and directed.
M&L for SFRC manhole covers with round frame of size 31.5" thickness 6.50" and cover size 25.6" thickness 3.50" with 20" clear opening fixed including dismentling of old manhole cover slab complete all as specified and directed.
Cleaning/removing blockage of EWC, IWC, Gully Trap, including P or S Traps of any description, by rodding, by pressure pumps of any description or by other mechanical equipments in any position or locations at Military station Bikaner under AGE B/R-I area complete satisfaction of Engr-in-Charge.
Cleaning/removing blockage of floor trap, nahni trap, wash basins, sinks etc including waste pipe or waste coupling etc. by manually or mechanically at Military station Bikaner under AGE B/R-I area complete satisfaction of Engr-in-Charge.
Cleaning/removing blockage sludge of sewer line (SGSW/ RCC/ CI) of dia 100/ 150/ 200/ 300mm etc of any description or in any position by roding, by pressure pump of any type or by using any mechanical equipments, manually or by puncher of sewage`line and repair the same if required including taking off and refixing manhole covers including removing all sludge in or outside MD land complete all as specified and directed.
Cleaning/removing blockage of manholes of any size or depth upto 1.0 metre in foul condition by manually or mechanically by roding or any other mechanical equipments till the entire satisfaction of Engr -in- Charge. All solid/semi solid sludge is to be deposited out side the defence land or depositing where directed by Engr-in-Charge including taking off and re-fixing manhole covers complete all as specified & directed at all Military Station Bikaner
Cleaning/removing blockage of manholes of any size or depth upto 1.0 metre to 1.50 metre in foul condition by manually or mechanically by roding or any other mechanical equipments till the entire satisfaction of Engr -in- Charge. All solid/semi solid sludge is to be deposited out side the defence land or depositing where directed by Engr-in-Charge including taking off and re-fixing manhole covers complete all as specified & directed at all Military Station Bikaner
Cleaning/removing blockage of manholes of any size or depth upto 1.5 metre to 3.00 metre in foul condition by manually or mechanically by roding or any other mechanical equipments till the entire satisfaction of Engr -in- Charge. All solid/semi solid sludge is to be deposited out side the defence land or depositing where directed by Engr-in-Charge including taking off and re-fixing manhole covers complete all as specified & directed at all Military Station Bikaner
Cleaning/removing blockage of manholes of any size or depth 3.00 metre above in foul condition by manually or mechanically by roding or any other mechanical equipments till the entire satisfaction of Engr -in- Charge. All solid/semi solid sludge is to be deposited out side the defence land or depositing where directed by Engr-in-Charge including taking off and re-fixing manhole covers complete all as specified & directed at all Military Station Bikaner
De-watering from septic tanks/soakage wells by honey sucker machine and also removing of all wastes, solid or liquid/sludge in foul condition including taking and placing in same position the cover slab of any description to the location as specified and directed by Engr-in-Charge. Note : The rate includes for carrying and empting of sewage water out side defence land or as directed by Eng-in-charge without any extra cost to the Govt.
De-sluding by removing of solid/semi solid sludge from existing septic tanks/soak wells of any depth and capacity in foul conditions including taking and placing in position the cover slabs of any description including cement sand mortar 1:4 if required. Removal of sludge/solid contents will be remove to any place out side defence land or depositing where directed by Engr-in-Charge all as specified and directed. at all Military Station Bikaner. Note : The sludge shall have to be disposed off in trenches duly excavated and covered after sprinkling of chemicals and cover with excavated soil and removal of extra soil without any extra cost to govt.
Cleaning/removing blockage of EWC, IWC, Gully Trap, including P or S Traps of any description, by rodding, by pressure pumps of any description or by other mechanical equipments in any position or locations at all ASCON Nodes viz Udasar, Jamsar, Lakhusar, Amarpura, Marh, Bajju till complete satisfaction of Engr-in-Charge.
Cleaning/removing blockage of floor trap, nahni trap, wash basins, sinks etc including waste pipe or waste coupling etc. by manually or mechanically equipment in any position or locations at all ASCON Nodes viz Udasar, Jamsar, Lakhusar, Amarpura, Marh, Bajju till complete satisfaction of Engr-in-Charge.
Cleaning/removing blockage sludge of sewer line (SGSW/ RCC/ CI) of dia 100/ 150/ 200/ 300mm etc of any description or in any position by roding, by pressure pump of any type or by using any mechanical equipments, manually or by puncher of sewage`line and repair the same if required including taking off and refixing manhole covers including removing all sludge in or outside MD land at all ASCON Nodes viz Udasar, Jamsar, Lakhusar, Amarpura, Marh, Bajju till complete satisfaction of Engr-in-Charge.
Cleaning/removing blockage of manholes of any size or depth in foul condition by manually or mechanically by roding or any other mechanical equipments till the entire satisfaction of Engr -in- Charge. All solid/semi solid sludge is to be deposited out side the defence land or depositing where directed by Engr-in-Charge including taking off and re-fixing manhole covers at all ASCON Nodes viz Udasar, Jamsar, Lakhusar, Amarpura, Marh, Bajju till complete satisfaction of Engr-in-Charge.
De-watering from septic tanks/soakage wells by honey sucker machine and also removing of all wastes, solid or liquid/sludge in foul condition including taking and placing in same position the cover slab of any description to the location as at all ASCON Nodes viz Udasar, Jamsar, Lakhusar, Amarpura, Marh, Bajju till complete satisfaction of Engr-in-Charge. Note : The rate includes for carrying and empting of sewage water out side defence land or as directed by Eng-in-charge without any extra cost to the Govt.
De-sluding by removing of solid/semi solid sludge from existing septic tanks/soak wells of any depth and capacity in foul conditions including taking and placing in position the cover slabs of any description including cement sand mortar 1:4 if required . Removal ofwill be remove to any place out side defence land or depositing where directed by Engr-in-Charge all as specified and directed. at all nods Viz Udasar, Jamsar, Lakhusar, Amarpura, Marh, Bajju. Note : The sludge shall have to be disposed off in trenches duly excavated and covered after sprinkling of chemicals and cover with excavated soil and removal of extra soil without any extra cost to govt.
vikas builders
M S GROUP
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .