Karnataka

Retender

Works

Electrical

Providing LT Service Lines by UG Cable to Exisitng Pumpsets and BTDA Buildings along with LED Street Lighting to Type A Layout and Dismantling of Aerial Bunched Cable(AB Cable)over Type-A Layout at Navnagar,Bagalkot

Bagalkot Town Development Authority

BTDA Executive Engineer Office Div No 2 Bagalkot | Karnataka

Amount: ₹2.3 CrCloses: 22 Nov 2024Closed

Timeline

Published12 Nov 2024
Closed22 Nov 2024
Retendered12 Nov 2024

Cancellation Details

Retendered

RetenderedRetenderedReason: Retendered

Published 12 Nov 2024

Tender Value

₹2.3 Cr

EMD Value

₹3.5 L

Closing Date

22 Nov 2024, 10:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Bagalkot Town Development Authority

Contact Person

Ravi Komar

Office Number

08354297054

Work Description

Providing LT Service Lines by UG Cable to Exisitng Pumpsets and BTDA Buildings along with LED Street Lighting to Type A Layout and Dismantling of Aerial Bunched Cable(AB Cable)over Type-A Layout at Navnagar,Bagalkot

Tender Information

Tender ID

BTDA/2024-25/EL/WORK_INDENT69

Reference Number

BTDA/2024-25/EL/WORK_INDENT69

Tender Type

Open

Product Category

Electrical

Form of Contract

Two Tender Document System(Two Cover)

Location

BTDA Executive Engineer Office Div No 2 Bagalkot

Source Website

Subscribe to view

Documents Required

7 documents required · 6 mandatory · 1 optional

Technical Bid

OptionalAnnual Turnover Certificate

RequiredWORKDONE CERTIFICATE

Requiredline of credit

RequiredClass-I Electrical Registered Contractor / Electrical Inspectorate Department

RequiredA valid EPF Registration Certificate which is registered under Employees Provident Funds and Miscellaneous Provident Act, 1952.

RequiredA valid ESI Registration Certificate

RequiredA valid GST Registration Certificate which is registered under Goods and Service Tax GST

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Conditional tenders will not be accepted

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The percentage quoted should be include cost of Royalty charges on constructive materials & other taxes as per the rates prevailing Government orders at the time of execution and including cost and conveyance of all materials, curing, loading and unloading with all leads and lifts, labour,hire charges of machinery & equipment etc., complete and all incidental charges. All the items shall be executed as directed by the Engineer-in charge of work.

The tenderers are requested to abide instructions conditions contained in the Bid Documents and further orders thereon

Royalty charges will be deducted in every bill of contract as per rules

All items in the tender are including all lead and lifts, loading &unloading charges etc complete.,and as directed by the Engineer in charge of work.

The Department is not responsible for any delay in accessing eprocurement portal

The Employer reserves the right to reject any or all tenders without assigning any reason

Financial Year will be reckoned as the period between first day of April and Thirty-first day of march of Succeeding year (both days inclusive).

The estimated amount put to tender for the work is exclusive of GST. The contractor should bid based on the estimated amount put to tender.(excluding GST but including all other charges as applicable) GST shall be paid to the tendered amount separately As applicable. Further the increase in GST shall not be paid in the extended period of contract for which the contractor alone is responsible for delay

Technical Criteria

General

List of works for which tenders already submitted

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

List of Financial Resources with Certificates

Past Experience

Achieved in at least two financial years a Minimum financial turnover of Rs.461.42 Lakhs usually not less than 2 times the estimated annual payments under this contract) Calculated as per Govt circular PWD.60.CRM.2021 Dated.08/11/2021) and updated to the financial year in which the tenders are invited. Financial turnover of previous years shall be given a weight of 10% per year to bring them to the price level of the financial year in which the tenders are invited. Audited profit and loss statement certified by a practicing Chartered Accountant along with copies of IT returns filed for the two years indicated above and shall bear the UDI number shall be furnished.

Audited CA Certificate of Annual Turnover

Executed in any one financial year, for the following minimum quantities of work (Usually 80% of the peak annual rate of construction) 1)UG Cable not Less than 95 Sqmm-6 Km 2)LED Street Lights-25 W-520 Nos 3)LT Feeder Pillar Boxes-40 Nos

Work Done Certificate

Satisfactorily completed (at least 90% of the contract value), as prime contractor, at least one similar work of value not less than Rs. 115.35 Lakhs (Usually not less than 50% of the estimated value of the Contract) during last 5 years reckoned back from 2023-24. The cost will be updated to the present value by giving weightage of 10% each year, if the work is completed prior to the year 2023-24. The certificate should be obtained from the officer not below the rank of Executive Engineer of the concerned Division/Equivalent officer and countersigned by the Superintending Engineer of the concerned Circle/next higher officer. Similar Work Means:-HT/LT Line Works.

Work Done Certificate

Liquid assets and/or availability of credit facilities of not less than Rs.115.35 Lakhs (usually equivalent to the estimated cash flow for 3 months in the peak construction period) Credit lines/letter of credit/ certificates from Nationalised banks/ Scheduled Banks for meeting the fund requirement etc. and the line of letter credits letter issued by the Bank shall be got confirmed by the issuing banks, otherwise, the bids may be disqualified.

Line of Credit

Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value

Others -- AS par tender document

Capabilities of Vendor

A valid Registration Certificate of Class-I Electrical Registered Contractor / Electrical Inspectorate Department.

Others -- AS par tender document

A valid EPF Registration Certificate which is registered under Employees Provident Funds and Miscellaneous Provident Act, 1952.

Valid EPF Certificate

A valid ESI Registration Certificate which is registered under Employees State Insurance Act, 1948

Valid ESI certificate

A valid GST Registration Certificate which is registered under Goods and Service Tax GST

GST Registration

Fee & Financial Details

Tender Fee Amount

₹5,000

EMD Fee Amount

₹3.5 L

Important Dates

Last Activity

12 Nov 2024

Published

12 Nov 2024

Bid Opening

25 Nov 2024

Download Ends

16 Nov 2024

Pre-Bid Meeting

16 Nov 2024

BOQ Preview

•

Supply, Installation, Testing & commissioning of 1 Km length of 11 KV 3 core 240 sq.mm XLPE UG Cable using Conventional laying with excavtion in soil.including cost and conveyance of all materials, cu...

•

Cable termination kit Outdoor HS Type Suitable for 3x240 Sqmm Cable

•

Cable termination kit Indoor HS Type Suitable for 3x240 Sqmm Cable

•

LT Feeder Piller Box with Poreclain Rewireable Cutout and & 1 No of 630 Amps Load Break Switch with Copper Busbar as

•

per IS-13947 Part-1&2-1-8 Way (Refer Dwg No. BESCOM/GM/QS&S/41 Dtd

•

Rod Earthing-Rod type of earthing using 40 mm Dia, 3 Mtr long MS rod as ground rod, in earth pit of 300 mm width and 3300 mm depth and using 50x6 mm flat welded to ground rod as terminal & connected t...

•

(3.251 mm Dia), Std Wt: 128 Kg/KM

•

Bentonite clay slurry for earthing in 50 Kg Bag

•

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975-95 Sqmm...

•

Aluminium End Terminal (Lug)-95 Sqmm

•

11 kV, 400 Amps Double Break GOS

•

(Dwg No. BESCOM/GM/QS&S/22 Dtd 24.11.2018)

•

RCC Hume pipe, 2000 mm Long, 150 mm Dia

•

Collars for RCC Hume Pipe

•

GI Pipe, 100 mm Dia for drain crossing, cable raising etc.,

•

HDPE/PLB Pipe 40/33 mm

•

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-

•

1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975-16 Sqmm...

•

25 Sqmm, 4 Core, (13 GI Strips - 4 x 0.8 mm)

•

50 Sqmm, 4 Core, (17 GI Strips - 4 x 0.8 mm)

•

Running Single Circuit 11 kV, 3 Phase Power Line on 9 Mtr Supports with an Average Span of 30 Mtrs Using 3x95 Sqmm + 1x70 Sqmm Aerial Bunched Cables (ABC) using PSCC Pole - 9 Mtr Long, 300 Kg WL for D...

•

Supplying and fixing angle iron frame work fabricated out of

•

M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and

•

painted with 2 coats of red oxide and then two coats of

•

approved paint.-...

•

Erection of LT Feeder piller box including necessary civil works like soil excavation & concreting etc. complete-above 8 Ways

•

Transportation using 7.5/10 Tons Lorry

•

Loading of any type of material not covered specifically (cost includes crane charges if any).

•

UnLoading of any type of material not covered specifically (cost includes crane charges if any).

•

UG Cable Work-Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr, Supplying and Displaying necessary D...

•

Refilling the cable trenches with selected available earth from trench excavation including watering, consolidation in layers of 15 cm. Thickness including depositing of the surplus earth with a lead ...

•

Transporting Cable from Store to work spot including loading and unloading (including Crane and other

•

equipment charges if any)LT Cable-35 to 95 Sqmm (3.5/4 Core)

•

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as

•

directed by the departmental staff-LT Cable-35 to 95 Sqmm

•

Fixing of GOS including wiring (11 kV Double Break 400 Amps)

•

Cable termination kit Outdoor HS Type Suitable for 3x240 Sqmm Cable

•

Cable termination kit Indoor HS Type Suitable for 3x240 Sqmm Cable

•

Supply of LED Streetlight luminaire with pressure die cast

•

aluminium housing body for optimal thermal dissipation.

•

Lamp compartment comprising of anti glare clear diffuser

•

with Injection moulded polyc...

•

LED Streetlight 120 W

•

LED Floodlight 150W

•

Fixing halogen/metal halide / SVL / IL / LED floodlight fitting

•

over existing pole / wall ceiling including clamps, bolts, nuts

•

and wiring using suitable capacity wires. (Electrical PWD 2022-23 SR PgN...

•

Supplying and Fixing of........mm dia class A GI pipe bracket

•

upto 2 ms long bent at suitable angle and fixing to this

•

bracket 1x40/2x40 W fluorescent tube street light fitting of all

•

capacities to GI...

•

Supplying and drawing Flexible Multicore Cable manufactured

•

with electrolytic grade flexible copper with low conductor

•

confirming to IS 8130-1984 and (Virgin) PVC insulation

•

sheathed suitable for work...

•

Fabricating,Supplying,Erecting,Testing,Installation & Commissioning of Street Light Timer Automatic On/Off Control Box as per the Enclosed Data Sheet Thiristor based Smart street light control and M...

•

Providing And Laying Foundation For 9 Mtr Octogonal Pole As Per Standerd Specification ,Quantity,Measurements Specified In Foundation Estimate Appended as per the directions of site engineer.

•

Supplying, fixing and wiring Electronic Trivector Meter (ETV)

•

5 to 32/63 Amps three phase 4 wire whole current class-1

•

Accuracy Energy Meter.

•

Fabricating, supplying and erection of ... ms long hot dip

•

Galvanized Octagonal hot dip Pole with BSEN 10025 grade S

•

355 JO steel plate for shaft, IS 2062 for base plate with door

•

opening arrangements...

•

Supplying, and fixing of Hot dip Galvanized M.S.Bracket

•

suitable for out door luminaries and mounted on Octagonal

•

pole using necessary bolts, nuts etc., complete-Double Arm Bracket with 2000mm Standar...

•

Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr, Supplying and Displaying necessary Danger Boards a...

•

Cutting road surface

•

Asphalt cutting

•

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as

•

directed by the departmental staff-LT Cable-2.5 to 25 Sqmm

•

Straight Through Jointing Kit Suitable for

•

1.1 kV Class LTUG Cable as per IS-13573--25 Sqmm, 4 Core

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

Ind No.69 DTS (Chgd) - Copy.docx

Tender Document • 1.61 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].