Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.0 LAccepted-AOC | L1 | Accepted-AOC Lowest | |
| 2 | L2₹20.9 L+₹1.9 L (9.92%)Rejected-Finance | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹23.0 L+₹3.9 L (20.7%)Rejected-Finance 1291 1ST FLOOR SECTOR 26 PANCHKULA HARYANA 134116 | PANCHKULA | HARYANA | 134116 | L3 | Rejected-Finance Other than lowest |
Tender Value
Refer Docs
EMD Value
₹50,000
Closing Date
13 Apr 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER (AF) THOISE
GARRISON ENGINEER (AF) THOISE 19 FBSU, c/o 56 APO, PIN 937219
REPAIR TO PATH, HARDSTANDING, FENCING, COMPOUND WALL AND TRAVERSES AT AF STN THOISE UNDER GE(AF) THOISE
2023_MES_585783_2
GEAF/T-02/2023-24
Open Tender
Civil Works
Item Rate
210 days
GARRISON ENGINEER (AF) THOISE
As per tender document
7 documents required · 7 mandatory
₹500
GE AF Thoise
₹50,000
Yes
22 Aug 2023
29 Mar 2023
15 Apr 2023
29 Mar 2023
13 Apr 2023
29 Mar 2023
Amount
Demolition of cement concrete in ground floor and paving n. exc 15 cm thickness (below or above ground level), Complete all as specified and as directed by Engr-in-Charge.
Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facing, dressed stone work and pre cast concrete articles, Complete all as specified and as directed by Engr-in-Charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premis, Complete all as specified and as directed by Engr-in-Charge.
Dismantling posts & struts; (wood, steel or R.C.C) any section, including taking out embedded portion (embeded in conc) & making good distributed ground, Complete all as specified and as directed by Engr-in-Charge.
Dismantling fencing wire mesh, any type, Complete all as specified and as directed by Engr-in-Charge.
Dismantling wrought iron or mild steel work of any description not otherwise provided for, Complete all as specified and as directed by Engr-in-Charge.
M&L 100 mm thick cement concrete type C-2, 1:3:6 (using 40 mm graded crushed stone aggregate) as in plinth protection and hard standing, finishing cement concrete surface even an smooth wothout using extra cement, Complete all as specified and as directed by Engr-in-Charge.
M&L precast cement concrete type C-1, 1:3:6 (using 20mm graded crushed stone aggregate) block masonary with solid blocks exc 10 cm in with and setting in cement mortar 1:4, Complete all as specified and as directed by Engr-in-Charge.
M&L rendering 15 mm thick on fair faces of brick work or concrete surface in CM 1:4 finished even & smooth surface without using extra cement, Complete all as specified and as directed by Engr-in-Charge.
M&L for preparing new untreated plaster surface of walls and applying two coat of cement based paint etc, Complete all as specified and as directed by Engr-in-Charge.
M&L 75mm thick cement concrete type D-2, 1:4:8 (using 40 mm graded crushed stone aggregate) as in sub base for Paving tiles, paver block etc, Complete all as specified and as directed by Engr-in-Charge.
M&L for Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes as in CM 1:6, Complete all as specified and as directed by Engr-in-Charge.
M&L for 30mm thick paving tiles using white cement and pigments of size 300 x 300 with wear resistance coating of approved design and colour laid with cement slurry @ 3.00 kg per sqm, Complete all as specified and as directed by Engr-in-Charge.
Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc, laid bedded and pointed in mortar Complete all as specified and as directed by Engr-in-Charge.
M&L for 60 mm thick M-35 grade machine pressed precast concrete interlocking paver block any shape and size conforming to IS-15658-2006, with grey cement and pigment, Complete all as specified and as directed by Engr-in-Charge.
M&L for 80 mm thick M-40 grade machine pressed precast concrete interlocking paver block any shape and size conforming to IS-15658-2006, with grey cement and pigment, Complete all as specified and as directed by Engr-in-Charge.
M&L for sand cushioning / Sand filling under floors in 25mm thick (below paver blocks) in including watering and consolidation, Complete all as specified and as directed by Engr-in-Charge.
S&F for mild steel works as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc and flat iron fillets for securing wire mesh similar work Confirming to Fe-290 Gde E-165 etc, Complete all as specified and as directed by Engr-in-Charge.
S&F in repairs galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts, incl securing or tying at crossings with and provision of galvanised mild steel wire, staple or steel pins, etc, Complete all as specified and as directed by Engr-in-Charge.
S&F 4mm dia galvanised steel wire 150x100mm mesh chain link fencing including line wires, any type of standards, rails, straining bolts, etc. including provission of binding wire, Complete all as specified and as directed by Engr-in-Charge.
S&F MS bars 10 mm dia and over cut to length bent to shape required and all as specified conforming to gde Fe 410- W for securing chain link fencing, Complete all as specified and as directed by Engr-in-Charge.
M&L for plain cement concrete 1:3:6 type C2 (using 40mm graded crushed stone aggregate) as in foundations and filling around the fencing post, Complete all as specified and as directed by Engr-in-Charge.
M&L for RCC type B1, 1:2:4 (using 20mm graded aggregate) for in pre-cast fencing post, struts etc for fencing avg sectional area exceeding 100 sq cm and not exceeding 250 sq cm with or without chamfered angels and flats incl necessary form work, Complete all as specified and as directed by Engr-in-Charge.
M&L for mild steel TMT bars 6 to 8mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than .9mm dia, Complete all as specified and as directed by Engr-in-Charge.
All as per BOQ Ser item No -24.00 here in before but 5mm dia and over up to incl 10mm as in strips and spacers, Complete all as specified and as directed by Engr-in-Charge.
S & F Joist, channel, angle, or tee sections Fe-410-W (Gde-E-250 Quality-B, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated), Complete all as specified and as directed by Engr-in-Charge.
S&F for mild steel screw bolts (machine made) diameter of neck 16 to 20 mm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 15 cm and n exc 22.5 cm long, Complete all as specified and as directed by Engr-in-Charge.
M&L two coat of synthetic enamel paint over a coat of red oxide on newly steel surfaces of any description,over 10cm in width or girth including preparation of surface, Complete all as specified and as directed by Engr-in-Charge.
M/S GHULAM MOHAMMAD CHATAPA
NSK TRADER
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .