Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.1 LAccepted-AOC | L1 | Accepted-AOC Being L1 and reasonable | |
| 2 | L2₹30.8 L+₹1.7 L (5.77%)Rejected-Finance 34 C R AVENUE JABAKUSUM HOUSE 3RD FLOOR ROOM NO 312 KOLKATA 700 012 | KOLKATA | WEST BENGAL | 700012 | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹32.5 L+₹3.3 L (11.4%)Rejected-Finance ROOM NO 262 PART II NEAR SANKER MANDIR GANESH MURTHI NAGAR COLABA MUMBAI 05 | MUMBAI | L3 | Rejected-Finance Being L3 |
Tender Value
₹32 L
EMD Value
₹64,000
Closing Date
21 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (P) KOLKATA
BALLYGUNGE MAIDAN CAMP, GURUSADAYA DUTTA ROAD, KOLKATA-19
PROVN OF 01 X GUARD REST ROOM WITH ATTACHED TOILET FACILITY NEAR GATE NO. 3 AT NMS UNDER GE (P) KOLKATA.
2023_MES_610661_1
8038/E8
Open Tender
Civil Works
Item Rate
180 days
NABAGRAM
CLASS D
CATEGORY a i
8 documents required · 8 mandatory
₹500
GE (P) KOLKATA
₹64,000
Yes
6 Nov 2023
25 Jul 2023
26 Aug 2023
25 Jul 2023
21 Aug 2023
8 Aug 2023
Amount
Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out soft and loose soil all as specified and directed.
Excavation in trenches, n.exc 1.5m wide and n.exc 1.5m in depth, for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc, n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out in any type of soil all as specified and directed.
Material and labour for Sand filling under floors or in foundations including watering and consolidation all as specified and directed.
Material and labour for Cement concrete type D2, 1:4:8 (40 mm graded aggregate) as in foundation filling and mass concrete complete all as specified and directed.
Material and labour for brick work with sub class B bricks straight or curved on plan exc 6mtr mean radious built in cement mortar 1:6 complete all as specified and directed.
Material and labour for half brick thick brick work with sub class 'B' bricks straight or curved on plan to any radious in built in cement mortar 1:4 complete all as specified and directed.
Material and labour for RCC M-25 (Design mix) (using 20mm graded crushed stone aggregate) as in foundation, plinth beams base for columns etc complete all as specified and directed.
Material and labour for RCC M-25 (Design mix) (using 20mm graded crushed stone aggregate) as in columns, pillers post etc complete all as specified and directed.
Material and labour for RCC M-25 (Design mix) (using 20mm graded crushed stone aggregate) as in beam cantilever beam etc complete all as specified and directed.
Material and labour for RCC M-25 (Design mix) (using 20mm graded crushed stone aggregate) as in slab supported on wall, beam and columns etc complete all as specified and directed.
Form work to sides of concrete foundation, footings, bases of columns, and soffits of foundation and plinth beams, and simillar work (flat) fair finished surfaces of concrete complete all as specified and directed.
Form work to edges of concrete flats, treads, breaks in floors, window cills, concrete rallings, floor and roofs n.exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work ex 10 cm but n.exc 20 cm wide for rough finished surfaces of concrete complete all as specified and directed.
Form work to soffit of suspended slab such as roof slab for rough finished surfaces of concrete complete all as specified and directed.
Form work to side and soffit of plinth or roof beam etc for rough finished surfaces of concrete complete all as specified and directed.
Form work to side of piller, post struts etc for rough finished surfaces of concrete complete all as specified and directed.
Material and labour for TMT mild steel bars 10 mm dia and over, cut to length, bent to shape reqd, including cranking, bending spirally for hooking for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and directed.
All as per item No 16.00 here in before but 5 mm dia and over as in stirrups, spacers and binders.
Material and labour for hardcore of broken bricks boulders of guage exc 63mm but n.exc 100 mm, eposited, spread and levelled in layers n.exc 15 cm thick, watered and rolled/ rammed to a true surface complete all as specified and directed.
Material and labour for 75 mm thick PCC 1:3:6, type C-2 using 40 mm graded crushed stone aggregate as in plinth protection, sub base of floor complete all as specified and directed.
Material and labour for 25 mm thick PCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in rough floor finish surface complete all as specified and directed.
Material and labour machine cut kota stone flooring 15-18 mm thick over cement screed bed 20 mm thick in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting as required, rubbing, polishing to granite finish complete all as specified and directed.
Material and labour for machine cut kota stone slab 15-18 mm thick as in riser of steps, skirting, dado and pillar laid over rendering of 10 mm thick in cement morter 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting as required, rubbing and polishing to granite finish complete all as specified and directed.
Material and labour for Glazed ceramic coloured tiles (Premier quality) of size 350 mm x 250 mm x 7 mm thick or 450 mm x 350 mm x 7 mm thick on vertical surfaces such as skirting , dado and risers to steps etc, set and jointed in neat cement slurry and pointed in white cement with pigment to match the surface over 10 mm thick rendering in CM 1:4 all as specified and directed.
Material and labour non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangulament ) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors set and jointed in neat cement slurry and pointed in white / coloured cement with pigment to match over 15 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.
Material and labour for Rendering 15 mm thick cement plaster in cement mortar (1:6) on fair face of brick work or concrete surfaces of wall and to be finished even and smooth without using extra cement complete all as specified and directed.
Material and labour for Rendering 15 mm thick cement plaster in cement mortar (1:4) in two layers using water proofing compound on other than fair face of brick work or concrete surfaces of wall and to be finished even and smooth without using extra cement complete all as specified and directed.
Material and labour for rendering 5 mm thick on fair faces of concrete surface with cement mortar 1:3 and to be finished even and smooth (without using extra cement) as on ceilling complete all as specified and directed.
Supply only water proofing compound.
Material and labour for two coat of cement based paint including preparation to new surfaces of walls including cement primer complete all as specified and directed.
Material and labour for two coat of oil bound distemper over chalk whiting on plastered surfaces including preparation to newly plastered surfaces of walls complete all as specified and directed.
Material and labour for three coats of white wash on ceilling including preparation to newly plastered surfaces of walls complete all as specified and directed.
Returning filling in any type of soil including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.
Removing of excavated soil n.exc 50 m and depositing, where directed at a level n.exc 15 m above the starting point complete all as specified and directed.
Material and labour for water proofing treatment to RCC roof slab including parapet as under : (a) Applying bituminous primer @ 0.30 ltrs/Sqm over cleaned and dry roof surface including paraper. (b) laying one layer of APP based polymeric membrance, 3 mm thick, weight not less than 3.60 Kg/Sqm, reinforced with non woven polyster fiber reinforcement (weight not less than 150 gm/Sqm), sealed by torch application with a minimum overlap of 100 mm and 75 mm at end and side of polymeric membrane. (c) A layer of hot blown bitumen grade 85/25 @ 1.2 KgSqm & a layer of bituminious aluminium paint as final finish @ 0.20 Kg/Sqm shall be applied on top surfaces of APP membrane. APP based membrane shall be 'Supper thermoley" manufactured by M/s STP Ltd or "Moply FP" manufactured by M/s Texsa India Ltd or equivalent of M/s IWL (I) Ltd.
Material and labour factory made coloured precast chequered cement concrete designer tile (interlocking tile) top layer glazed made with white cement & pigment and the base in grey cement of thickness 22 to 25 mm thickness in different colour and pattern (compressive strength not less than 250 Kg/Sqm) as approved by GE, set in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over 15 mm thick screed bed or bedding layer of cement mortar 1:4 complete all as specified and as directed.
Supply and fixing solid block kerb stone pre cast PCC (1:2:4) type B1 using 20 mm graded stone aggregate, laying at or near ground level to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.
Pressed steel frames factory made for doors out of 1.25mm thick PBI sheet conform to IS-4351 with one or more rebates including necessary Flat Iron lugs, hinges, lock strike plate etc complete, size of frame 105 x 60mm including bottom of each chowkat to be welded with 2 Nos 25x25x3mm thick angle iron projecting 10cm on either side, tarring ends and back of chowkhats and lugs including back filling of PCC 1:3:6 for chowkhats including one shop coat of red oxide primer complete all as specified and directed.
Supply and fixing for factory made (with partical board core) solid PVC moulded door shutter 28 to 30 mm thick (Style) with 2, 4 or 6 raised panel designed with 2 mm thick 3D wood grain moulded PVC sheet polyurethane painted on the front face and 2 mm plain white colour PVC sheet on back face fixing in frame complete all as specified and directed.
Supply and fixing Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain coloured PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification and drawing complete all as specified and directed.
Material and labour for 35 mm thick 2nd class hard wood plain framed panelled shutter (two panels) of factory made with lock rail and panel of 12 mm thick veneered particle board with commercial vace veneering on both faces including wooden beads on both sides, one coat of pink primer. The size of rail and stile as per IS-1003 part-I kiln seasoned and chemically pressure treated complete all as specified and directed.
Supply and fixing 35 mm thick 1st class hard wood factory made glazed and skeleton shutters open rebated and prepared to receive glass, gauge etc without sash bar but with lock rail fitted with cut and mitered beads for securing glass, edges of framing plain, chamfered or rounded etc supplied and fitted to chowkats complete all as specified and directed.
Supply and fixing steel window with side hung shutters incl projecting type hinges with steel handle, and steel jpeg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.
Supply and fixing Steel ventilator (Primer coated) with top hung shutter including projecting hinges, steel peg stay, single rebated comprises glazed Skelton shutter complete including cutting holes, hold fast of 150 mm long of 12 mm x 3 mm FI made to shape 4 No, handle of Z section 20 mm x 25 mm x 100 mm long 1 No in leaf, MS tower bolt 150 mm long 2 No per leaf, complete all as specified and directed. Note:The rates include for painting with one shop coat of zinc chromate primer
Supply and fixing Mild steel works of flat iron, square bar, round bars etc. as in framed work such as grills, guard bars, gratings etc incl bending, cutting and welding as necessary of confirming to Gde Fe 290-0 including one shop coat of red oxide primer all complete all as specified and directed.
Material and labour for PCC 1:2:4 type B1 using (20 mm graded aggregae) as in block for hold fasts, benching, coping apex stones, bed plates and the like including weathering slightly rounded or chamfered angles and throating complete all as specified and directed. Note : Form work required for these items included in the unit rate of this item.
Supply and fixing 3 mm thick sheet glass ordinary quality glazing with steel pins, oil putty to steel windows and, beads nails etc to wooden surfaces as in square exc 0.50 sqm in each pane, complete all as specified and directed.
Supply and fixing 3 mm thick frosted on one side sheet glass ordinary quality glazing with steel pins, oil putty to steel windows and, beads nails etc to wooden surfaces as in square exc 0.50 sqm in each pane, complete all as specified and directed.
Supply and fixing galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of apeture 1.00 mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.
Material and labour for preparation of new steel surface of any description over 10 cm width or girth and applying two coats of synthetic enamel paints over one coat of red oxied primer complete all as specified and directed.
Material and labour for preparation of new wood or wood based surface and applying two coats of synthetic enamel paints over one coat of pink primer complete all as specified and directed.
Supply and fixing mild steel helical/ordinary rat tail rod pattern door spring 300 mm including roller and roller plate complete fixed with welding complete all as specified and directed.
Supply and fixing Alluminium anodised barrel tower bolts 150 mm long, of extruded section complete all as specified and directed.
Supply and fixing Alluminium bow handle cast type anodised of size 150 mm, complete all as specified and directed.
Supply and fixing Alluminium alloy anodised sliding door bolt 200 mm long, with hasp staple (bolt type) and fixing clip of sheet cast or extruded section and fixing bolt and sliding bolts of extruded section complete all as specified and directed.
Supply and fixing 125 mm aluminium bow handle cast type anodised complete all as specified and directed.
Supply and fixing 100 mm long hasp and staple, aluminium anodized with bolt to hing plate and fixed with screws complete all as specified and directed.
Material and labour for preparation of newly plastered surfaces and applying three coats of white wash on wall complete all as specified and directed.
Supply and fixing pressed steel frame made out of MS sheet 1.25 mm thick of size 105 x 60 mm for doors/ windows with one or more rebates including necessary fixing lugs, hinges, hold fast, lock strike plate etc including one shop coat of red oxide primer complete all as specified and directed.
Supply and fixing Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet 20 mm width struck inside with solvent cement for style and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap inserts for top and bottom rail panelling of plain, colour PVC sheet to be fitted in the MS frame welded / sealed to the styles and rail with suitable PVC sheets beading and jointed together with solvent cement in frame at site as per specification and drawing in SSR part-II complete all as specified and directed.
Supply and fixing for Vitreous China Water closet squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including PCC bedding in 1:2:4 and connecting to trap and flush pipe complete all as specified and directed.
Supply and fixing for PVC (SWR) 'P' trap of 110/110 mm bore complete all as specified and directed.
Supply and fixing for PVC valveless syphonic action type, low level white flushing cistern of 10 ltrs capacity with inlet ball valve, float valve including connecting of PVC flush pipe complete and fixing with wall through brackets and handle all as specified.
Supply and fixing PVC connection 15 mm x 450 mm including brass check nut at both ends screwed for iron pipe of 15 mm bore complete all as specified and directed.
Supply and fixing in pillar tap 15 mm dia cast copperally fancy type with capstan heads chromium plated screwed down high pressure with or without lettered Hot or cold with long screwed screwed screwed shanks and fly nuts screwed for iron pipe fixed complete all as specified and directed.
Supply and fixing for vitreous china white wash basin, flat back of size 550 x 400 mm incl 32 mm dia PVC waste pipe, CP brass wast coupling 32 mm dia, pair of MS angle brackets or MS fastener/ bolts for fixing arrangements, 450 mm long PVC connection with PVC nut and washer complete all as specified and directed.
Supply and fixing bib tap cast copper alloy with crutch or butterfly handle, chromium plated fancy type screwed for iron pipe, suitable for 15 mm bore complete all as specified and directed.
Supply and fixing stop valve / angle valve cast copper chromium plated screwed down, high pressure with capstan head suitable for 15 mm bore, screwed both ends for iron pipe complete all as specified and directed.
Supply and fixing Vitreous China bowl type urinals flat back of size 465 x 355 x 265 mm white,with grating and union for discharge pipe complete including providing and fixing plugs, beading urinal against wall in cement mortar 1:2, securing urinal to plug with and including 60 mm long brass screws pointing around urinal back in cement mortar complete all as specified and directed.
Supply and fixing 15 mm dia glavanized pipes medium grade with all fittings and fixed complete wall and ceilling or laid in floors complete all as specified and directed.
Supply and fixing 20 mm dia glavanized pipes medium grade with all fitting and fixed complete to wall and ceilling or laid in floors complete all as specified and directed.
Cutting chases for concealed water tubing or concealed conduit & making good in CM 1:3 of girth n.exc 10 cm in brick wall complete all as specified and directed.
Supply and fixing for PVC SWR pipes 110 mm bore single socketed in any length with rubber ring joint fixed to wall or laid in trenches or in floors with steel clamps complete all as specified and directed.
Supply and fixing PVC SWR pipes 75 mm bore single socketed in any length with rubber ring joint fixed to wall or laid in trenches or in floors with steel clamps complete all as specified and directed.
Supply and fixing PVC SWR bends of 110 mm bore complete all as specified and directed.
Supply and fixing PVC SWR bends of 75 mm bore complete all as specified and directed.
Supply and fixing PVC (SWR) floor trap plain including jointing with solvent cement 75 mm dia complete all as specified and directed.
Supply and fixing PVC (SWR) reducer of 110 mm dia complete all as specified and directed.
Supply and fixing PVC (SWR) vent cowl 75 mm bore complete all as specified and directed.
Supply and fixing rotational moulded polyethylene water storage tank of capacity 1000 ltr (cylinder vertical with close top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed.
Supply and fixing stop valve cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe 20 mm bore complete all as specified and directed.
Supply and fixing 20 mm dia bore ball valves high pressure PTMT with epoxy coated alluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gms) complete all as specified and directed.
Supply and fixing towel rail 20 mm dia D type 60 cm long chromium plated brass screws and wooden / plastic cleats complete all as specified and directed.
Supply and fixing soap dish fixed with and including chromium plated brass screws and wooden / plastic cleats complete all as specified and directed.
Supply and fixing Aluminium hat peg sets (solid body) of size 125 mm to 175 mm (06 Nos peg in each set) fixed over wooden board or planks of 2nd class hardwood of size 20 x 40 cm and thickness 20 mm, including fixing arrengement with brick wall through chromium plated brass screws and wooden / plastic cleats complete all as specified and directed
Supply and fixing Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 of size 100 mm for PVC door complete all as specified and directed.
Supply and fixing extruded aluminium anodised alloy handles, fabricated type of size 150 mm for door complete all as specified and directed.
Supply and fixing aluminium anodized handle fabricated type 150 mm long complete all as specified and directed.
Supply and fixing aluminium anodized sliding door bolt 250 mm long with haps and staples (bolt type) and fixing clips of sheet cast of extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and directed.
Construction of septic tank for 10 users of size internal dimension 1.50 x 0.60 m, and depth of water level 1.20 m and free boarding 0.45 m, single chamber ( 0.23 m thick brick masonary wall construction) with top of RCC slab at 0.15 m above the ground level including necessary excavation and earth work in any type of soil and disposal of surplus soil to a distance not exceeding 50 metres including supplying and fixing of vent pipe, pre cast RCC covers with angle iron welded frame over inspection pit of size 0.45 x 0.45 m at both side of saptic tank complete all as specified and shown in Drg No CEPB/TD-79 (R) sheet 1/1 dated 27 Oct 1995 complete all as specified and directed.
Construction of soakage well 1.2 mtr dia and 3.00 mtr deep (Brick construction), foundation in PCC 1:3:6 type C-2, with top of slab RCC (Nominal mix) type B1, 1:2:4 (20 mm graded aggregate) at ground level including necessary excavation and earth work in any type of soil, walls of honey comb and solid brick in cement mortar 1:4 and disposal of surplus soil to a distance not exceeding 50 metres, vent pipe, supplying and fixing manhole covers with angle iron welded frame complete all as specified and shown in Drg No CE/TD-1202/03 dated 09 Oct 2003 revised on 21 Oct 2003 sheet 1/2 and CE/TD-1202/03 dated 09 Oct 2003 sheet 2/2 complete all as specified and directed.
Material and labour for SGSW drain pipe of 150 mm dia laid in trenches and jointed including concrete bed of PCC 1:3:6, type C2 (40 mm graded aggregate) to drain pipe including packing under and haunching against the side of pipe after they are laid complete all as speciied and directed.
Material and labour for cutting of existing GI Pipe in position of any bore uo to 50mm for and including insertion of new Tee or Ferrule for taking up new 25 mm connection, complete all as specified and directed.
Suppy and laying GI tube 25 mm dia medium grade with all fitting laid in trenches / floor / wall etc complete all as specified and directed.
Supply and fixing stop valves, 25 mm dia cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
Material and labour for point wiring concealed in PVC conduit with 1.5 sqmm size single core multi stranded copper conductor unsheathed PVC insulated 1100V grade cable for one light point controlled by one switch and with continuous earth wire as one number cable 1.5 sq mm copper conductor PVC insulated (FRLS) insulated , unsheathed copper cable multi strand conductor 1100 volts grade for continuity earth wire connected to common earth dolly and to be connected to MS box of min 1.6 mm thick having 4 Nos nuts to 4 corners with 6 mm thick prelaminated plastic sheet for housing switches, sockets outlet and regulators etc. complete all as specified and as directed.
Material and labour for point wiring concealed in PVC conduit with 1.5 sqmm size single core multi stranded copper conductor unsheathed PVC insulated 1100V grade cable for one ceiling /Exhaust fan point controlled by one switch and with continuous earth wire as one number cable 1.5 sq mm copper conductor PVC insulated (FRLS) insulated , unsheathed copper cable multi strand conductor 1100 volts grade for continuity earth wire connected to common earth dolly and to be connected to MS box of min 1.6 mm thick having 4 Nos nuts to 4 corners with 6 mm thick prelaminated plastic sheet for housing switches, sockets outlet and regulators etc. complete all as specified and as directed.
Material and labour for point wiring concealed in PVC conduit with 1.5 sqmm size single core multi stranded copper conductor unsheathed PVC insulated 1100V grade cable for One 3 pin switch socket outlet, 5 amps, independent, and with continuous earth wire as one number cable 1.5 sq mm copper conductor PVC insulated (FRLS) insulated , unsheathed copper cable multi strand conductor 1100 volts grade for continuity earth wire connected to common earth dolly and to be connected to MS box of min 1.6 mm thick having 4 Nos nuts to 4 corners with 6 mm thick prelaminated plastic sheet for housing switches, sockets outlet and regulators etc. complete all as specified and as directed.
Material and labour for point wiring concealed in PVC conduit with 4.0 sqmm size single core multi stranded copper conductor unsheathed PVC insulated 1100V grade cable for One 3 pin switch socket outlet, 15 amps, independent, and with continuous earth wire as one number cable 4.0 sq mm copper conductor PVC insulated (FRLS) insulated , unsheathed copper cable multi strand conductor 1100 volts grade for continuity earth wire connected to common earth dolly and to be connected to MS box of min 1.6 mm thick having 4 Nos nuts to 4 corners with 6 mm thick prelaminated plastic sheet for housing switches, sockets outlet and regulators etc. complete all as specified and as directed.
Supply and fixing switch socket combination 3 pin 5 A complete all as specified as directed.
Supply and fixing switch socket combination 3 pin 16 A complete all as specified as directed.
Supply and fixing switch piano, flush type single pole one way 5 Amps complete all as directed.
Material and labour for ceiling rose surface type bakelite 65X50 mm two or three terminals complete all as specified and directed.
Supply and fixing electronic dimmers, 450W, 250V flush type on the exiting phenolic laminated sheet etc. complete all as specified and directed.
Supply and fixing LED lights fitting 1x 16W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
Supply and fixing LED bld security light fitting 30/35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.
Supply and fixing exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and directed.
Supply and fixing MCB DB Single pole and neutral 8 way double door with 200 amps rated bus bar 230 V complete all as specified and directed.
Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 40-63 Amp and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.
Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SP 5-32 Amp and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.
Earthing complete with GI earth plate electronic 600 x 600x 6mm buried directly in ground vertically to a depth of not less than 2.25 m below ground level with the top edge of earth plate at a depth of not less than 1.5 mtr below ground level connected to GI earth lead 4 mm dia by means of nuts bolts washers etc made out of galvanized iron and GI wire connected to main switch/DB board including necessary excavation and earth work PCC (1 3 6) type C1 using 20mm graded stone aggregate earth chamber 40mm thick RCC cover type B1 (1 2 4 ) B1 using 20mm graded stone aggregate 20mm dia GI medium grade protection pipe upto main switch board etc complete all as shown in electrical plate No 3 of MES Schedule Part I complete all as specified and directed.
Suppy and laying XLPE insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volt grade, cross sectional area 35 Sqmm 3.5 core complete all as specified and directed.
Material and labour for sand cushioning/sand covering for under ground cable protection with clean dray sand all as specified and directed.
Material and labour for bricks clay well burnt Sub-class 'B' locally available laid flat in trenches over sand cushioning for cable protection complete all as specified and directed.
Material and labour boring of horizontal holes /trenchless hole for 50 mm bore pipe under the road below 1.50 mtr from the road/hard surface by trencheless technology using ultrasonic technique and including necessary machine without damaging the existing road and getting out in any type of soil and disposal of soil to a distance not exceeding 50 m from the site of work complete all as specified and directed. Note: Pipe Shall be measured and paid seperately.
Supply and fixing galvanised iron tubing 40 mm bore, light grade with all fittings & fixture as in cable protection laid in trenches/floor or on the Pole etc. complete all as specified and directed.
Tirupati Buildcon Pvt. Ltd.
Abida Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .