REPAIR/ REPLACEMENT OF INTERNAL WIRING, FITTINGS, FIXTURES AND CONNECTED ITEMS AND REPAIR TO CEILING FAN, EXHAUST FAN, GEYSER, ELECTRIC METER AND CONNECTED WORKS IN OTM ACCN AT AKHNOOR UNDER GE (SOUTH) AKHNOOR.

Amount

SCHEDULE 'A' PART-I : BOQ OF WORKS FOR E/M WORKS. Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc., complete all as specified and as directed by Engineer-In-Charge.

Point wiring (in existing conduits concealed to surface) for one light/ fan/ bell point controlled by one switch with 1.50 Sqmm, PVC insulated, unsheathed, single core, multi-stranded, copper conductor cable, 1100 Volts, using colour coding, drawn in existing conduit of any type and any dia including making good the disturbed surface matching to existing descriptions/ specifications, with and including sunken type pressed steel/ welded mild steel terminal box 1.20mm thick coated with anti corrosive paint and with bakelite laminated sheet top cover 3.0mm thick and including FRLS PVC green insulated unsheathed 1.50 Sqmm copper earth continuity wire connected to earth dolly, complete all as specified and as directed by Engineer-In-Charge.

Description all as per serial item No- 2.00 here-in-before but for one 3-pin socket outlet 5-Amps on the independent board.

Description all as serial item No- 2.00 here-in-before but for one 3- pin, 5-Amps, socket outlet on same board.

Description all as serial item No- 2.00 here-in-before but for point wiring controlled by two way switches.

Point wiring (in existing conduits concealed to surface) for 3-pin, 15 Amps, switch socket combination on independent board with 2.50 Sqmm, PVC insulated, unsheathed, single core, multi-stranded, copper conductor cable, FRLS, 1100 Volts, using colour coding, drawn in existing conduit of any type and any dia including making good the disturbed surface matching to existing descriptions/ specifications, with and including sunken type pressed steel/ welded mild steel terminal box 1.20mm thick coated with anti corrosive paint with bakelite laminated sheet top cover 3.0mm thick and including FRLS PVC green insulated unsheathed 2.50 Sqmm copper earth continuity wire connected to earth dolly, complete all as specified and as directed by Engineer-In-Charge.

Point wiring (concealed to surfaces) for one light/ fan/ bell point controlled by one switch with 1.50 Sqmm, PVC insulated, unsheathed, single core, multi-stranded, copper conductor cable, 1100 Volts, using colour coding, drawn in and including non metallic medium grade rigid PVC conduit, fire resistance, ISI marked, 20mm dia including all accessories concealed by chasing/ cutting grooves in the surface of walls/ floors/ ceilings and making good the disturbed surface matching to existing descriptions/ specifications, with and including sunken type pressed steel/ welded mild steel terminal box 1.20mm thick coated with anti corrosive paint and with bakelite laminated sheet top cover 3.0mm thick and including FRLS PVC green insulated unsheathed 1.50 Sqmm copper earth continuity wire connected to earth dolly, complete all as specified and as directed by Engineer-In-Charge.

Description all as serial item No- 7.00 here-in-before but for one 3- pin, 5-Amps, socket outlet on same board.

Description all as per serial item No- 7.00 here-in-before but for one 3-pin socket outlet 5-Amps on the independent board.

Description all as serial item No- 7.00 here-in-before but for point wiring controlled by two way switches.

Point wiring for 3-pin, 15 Amps, switch socket combination on independent board with 2.50 Sqmm, PVC insulated, unsheathed, single core, multi-stranded, copper conductor cable, FRLS, 1100 Volts, using colour coding, drawn in and including non metallic medium grade rigid PVC conduit, fire resistance, ISI marked, 20mm dia including all accessories concealed by chasing/ cutting in the surface of walls/ floors/ ceilings and making good the disturbed surface matching to existing descriptions/ specifications, with and including sunken type pressed steel/ welded mild steel terminal box 1.20mm thick coated with anti corrosive paint with bakelite laminated sheet top cover 3.0mm thick and including FRLS PVC green insulated unsheathed 2.50 Sqmm copper earth continuity wire connected to earth dolly, complete all as specified and as directed by Engineer-In-Charge.

Switch piano, flush type, single pole, one way, 5 Amps, complete all as specified and as directed by Engineer-In-Charge.

Switch piano, flush type, single pole, two way, 5 Amps, complete all as specified and as directed by Engineer-In-Charge.

Socket outlet, 5-pin, 5-Amps, flush type, complete all as specified and as directed by Engineer-In-Charge.

Switch socket combination, 2-in-1, 3-pin, 5-Amps, flush type, complete all as specified and as directed by Engineer-In-Charge.

Switch socket combination 2-in-1, 3-pin and 5 pin, 5 and 15 Amp flush type universal type, complete all as specified and as directed by Engineer-In-Charge.

Bell push switch, single pole, one way, flush type, 5-Amps, 240 volts, complete all as specified and as directed by Engineer-In-Charge.

Door bell, AC, 230 Volts, single pole, ding-dong type sound, complete all specified and as directed by Engineer-In-charge.

Electronic dimmers, 450W, 250V flush type on the exiting phenolic laminated sheet etc. as reqd, complete all specified and as directed by Engineer-In-charge.

Ceiling rose, three phase/ PVC/ polycarbonate, isolated body, complete all as specified and as directed by Engineer-In-Charge.

Lamp holder, PVC Polycarbonate type with back plate suitable for batten fittings inlcuding retrofit LED lamp of 12Watt, complete all as specified and as directed by Engineer-In-Charge.

Point wiring (in new concealed conduits to surfaces), modular type for one light/ fan/ bell point controlled by one switch with 1.50 Sqmm, PVC insulated, unsheathed, single core, multi-stranded, copper conductor cable, 1100 Volts, using colour coding, drawn in and including non metallic medium grade rigid PVC conduit, fire resistance, ISI marked, 20mm dia including all accessories concealed by chasing/ cutting grooves in the surface of walls/ floors/ ceilings and making good the disturbed surface matching to existing descriptions/ specifications, with and including sunken type pressed steel/ welded mild steel terminal box 1.20mm thick coated with anti corrosive paint and including FRLS PVC green insulated unsheathed 1.50 Sqmm copper earth continuity wire connected to earth dolly, complete all as specified and as directed by Engineer-In-Charge. Note: Cost of modular boxes, modular cover plates and different types of modules including anti-corrosive screws shall be deemed included in quoted rate.

Description all as serial item No- 22.00 here-in-before but for one 3- pin, 5-Amps, socket outlet on same board.

Description all as per serial item No- 22.00 here-in-before but for one 3-pin socket outlet 5-Amps on the independent board.

Point wiring (in new concealed conduits to surfaces), modular type, for 3-pin, 15 Amps, switch socket combination on independent board with 2.50 Sqmm, PVC insulated, unsheathed, single core, multi-stranded, copper conductor cable, FRLS, 1100 Volts, using colour coding, drawn in and including non metallic medium grade rigid PVC conduit, fire resistance, ISI marked, 20mm dia including all accessories concealed by chasing/ cutting in the surface of walls/ floors/ ceilings and making good the disturbed surface matching to existing descriptions/ specifications, with and including sunken type pressed steel/ welded mild steel terminal box 1.20mm thick coated with anti corrosive paint and including FRLS PVC green insulated unsheathed 2.50 Sqmm copper earth continuity wire connected to earth dolly, complete all as specified and as directed by Engineer-In-Charge. Note: Cost of modular boxes, modular cover plates and different types of modules including anti-corrosive screws shall be deemed included in quoted rate.

Modular stepped type (multi-steps) electronic regulator for ceiling fan 1200 mm, 240 volts, 100 Watts, single pole, including connecting, complete all as specified and as directed by Engineer-In-Charge.

Modular bell push switch, single pole, one way, 5-Amps, 240 volts, complete all as specified and as directed by Engineer-In-Charge.

Modular socket outlet, 2-in-1, 3-pin, 5-Amps, complete all as specified and as directed by Engineer-In-Charge.

Modular switch piano, single pole, one way, 5 Amps, complete all as specified and as directed by Engineer-In-Charge.

Modular Socket 6Amps/ 16Amps, 2/3-pin combined, 2-module,, complete all as specified and as directed by Engineer-In-Charge.

Modular switch piano, single pole, one way, 15 Amps, complete all as specified and as directed by Engineer-In-Charge.

Bed light fittings fancy type with back plate suitable for moutuing on wall with LED light of capacity 3W and connecting up with twin core twisted flexible copper conductor cable of suitable size, complete all as specified and as directed by Engineer-In-Charge.

LED tube light fitting, 18 watt, indoor decorative aluminium extruded T5 LED battens, including LED lamp 18 Watt and connecting up with twin core twisted flexible copper conductor cable of suitable size, complete all as specified and as directed by Engineer-In-Charge. Make: Havells cat part No- E-Lite LED Pride Plus Neo LHEXBLP5PN1W018/ Crompton cat part LCTL-18-CDL/ Bajaj product code-12410, luminaire type- BCLSB 18 NW.

LED mirror light, environmental friendly, ultra modern, energy saving, including LED lamp capacity 10 Watt, 2 feet long, connecting up with twin core twisted flexible copper conductor cable of suitable size, complete all as specified, complete all as specified and as directed by Engineer-In-Charge. Make: Havells/ Philips/ Osram/ Crompton.

Environmental friendly, ultra modern, energy saving, surface mounted, decorative hexagon bulk head back-lit LED luminaire comprising of high brightness LEDs lamp of 10 Watt, complete all as specified. Make: Havells ordering cat part No- HEXAFT10WLED857SSYMBOPC or equivalent in Bajaj/ Philips/ Wipro.

Ceiling light, size 600x600mm, with bright LEDs of 36 Watt, having superior illumination, connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-In-Charge. Make: Crompton cat part No- CCR-127-36-57-SL-NWH (Aura-I) or equivalent in Phillips/ Havells/ Wipro.

Ceiling light 18 W Slim surface mounted LED panel with premium diffuser to ensure glare free & even light distribution having Height: 27 mm for 18 W,ø 190 mm connecting up with twin core twisted flexible copper conductor cable of suitable size, complete all as specified, complete all as specified and as directed by Engineer-In-Charge. Make: Havells Cat part No LHEAAHP6IL1W018 or Equvalent makes in Philips/ Osram/ Crompton.

Decorative, wall light fixture made up of Polycarbonate, suitable for 9 W retrofit LED lamp B22 base., including LED lamp of 9 Watt, complete all as specified and as directed by Engineer-In-Charge. Make: Havells ordering cat part No-LHDL02160099 or equivalent in Bajaj/ Philips/ Wipro/ Crompton.

Decorative, 1 N x 9 W LED Lamp wall mounting, brushed nickel finish fixture with Opal Glass diffuser suitable with 9 W LED lamp B22 base including LED lamp of 9 Watt. Make: Havells ordering cat part No-LHFOAJE1TN1I060 or equivalent in Bajaj/ Philips/ Wipro/ Crompton.

Sub main wiring in repair (concealed conduits to surfaces) for circuits/ sub main wiring alongwith earth wire with two run of 4.0 Sqmm of fire resistance, PVC insulated copper conductor, single core cable, multi-stranded, FRLS, ISI marked, 1100 Volts grade and one run of 2.50 Sqmm, FRLS, PVC insulated copper conductor, single core cable, multi stranded, ISI marked, 1100 Volts grade as earth wire connected to earth terminal, drawn in and including non metallic medium grade rigid PVC conduit, fire resistance, ISI marked, 25mm dia including all accessories concealed by chasing/ cutting grooves in the surface of walls/ floors/ ceilings and making good the disturbed surface matching to existing descriptions/ specifications, complete all as specified and as directed by Engineer-In-Charge.

Sub main wiring in repair (concealed conduits to surfaces) for circuits/ submain wiring alongwith earth wire with two run of 6.0 Sqmm of fire resistance, PVC insulated copper conductor, single core cable, multi-stranded, FRLS, ISI marked, 1100 Volts grade and one run of 4.0 Sqmm, FRLS, PVC insulated copper conductor, single core cable, multi stranded, ISI marked, 1100 Volts grade as earth wire connected to earth terminal, drawn in and including non metallic medium grade rigid PVC conduit, fire resistance, ISI marked, 25mm dia including all accessories concealed by chasing/ cutting grooves in the surface of walls/ floors/ ceilings and making good the disturbed surface matching to existing descriptions/ specifications, complete all as specified and as directed by Engineer-In-Charge.

Sheet metal enclosures in repair for Single Pole and Neutral distribution boxes with double door glazed for incorporating MCBs, IP-43, 8-way with 200 amps rated busbar, 240 volts, as per IS-8623, complete all as specified and as directed.

Sheet metal enclosures in repair for Single Pole and Neutral distribution boxes with double door glazed for incorporating MCBs, IP-43, 12-way with 200 amps rated busbar, 240 volts, as per IS-8623, complete all as specified and as directed.

MCB, Triple Pole and Neutral, 63 Amps, 240 volts, 50 Hz, 'C' curve including necessary incoming and outgoing electric connection with suitable size of copper lugs, complete all as specified and as directed by Engineer-In-Charge.

MCB, Single Pole and Neutral, 40 Amps, 240 volts, 50 Hz, 'C' curve including necessary incoming and outgoing electric connection with suitable size of copper lugs, complete all as specified and as directed by Engineer-In-Charge.

MCB, single pole, 6 to 32 Amps, 240 Volts, 50 Hz, including necessary incoming and outgoing electric connection with suitable size of copper lugs, complete all as specified and as directed by Engineer-In-Charge.

Supply and fixing in replacement, 1100 Volts grade, heavy duty, multi-stranded cable, PVC insulated aluminium conductor, multi-stranded, cross sectional area 10.0 Sqmm, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1.0 metre apart Including 4.0mm suspension wire, one twin core cable flat or circular, complete all as specified and as directed by Engineer-In-Charge.

Earthing complete with galvanised steel earth plate electrode 60 cm x 60cmx6mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 meters below normal ground level. connecting to the GI wire 4 mm dia by means of bolls, nuts, check nuts and washers of galvanised iron and earth wire protected by provision of GI light grade pipe 15 mm bore including provision of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone aggregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM weight not less than 4 Kg/Sqm) and frame of angle iron 25x25x6mm with lugs 02 Nos and handle of 6mm dia MS bar made to shape, GI medium grade 20mm bore pipe for watering , perforated at bottom. 1.75 metre long placed on top edge of earth plate. charcoal and common salt filling with fixing arrangement, funnel wire mesh and earth work in soft soil returning filling in and removal of surplus soil to a distance not exceeding 50 meters all as per electrical plate 3 of SSR-2009 Part-I and connecting to earth test point all as specified or indicated including testing on completion. NOTE :- (i) Item of earthing includes cost of 7.5 m long GI wire of size 4 mm dia with protection pipe of 15mm dia GI medium grade, any variation in length shall be adjusted through deviation order based on SSR rates reduced by (-40)%. (ii) On testing after completion of earthing if the desired earth resistance is not obtained earthing will be re-done by the contractor at his own risk and cost.

Taking down carefully existing ceiling fans, of any make and size from existing positions after disconnecting electric connections, sealing cable end, dismantling/ removing blades carefully after un-screwing nuts, bolts, washers and removing fan and blades to store for repairs, overhauling, oiling, cleaning all dusts and inspaction for burnt coils including minors items as required for smooth functioning of fans and re-assembling, complete all as specified and as directed by Engineer-In-Charge. Note: Spare parts like ball bearings, gun metal bush, capacitors, canopy and rewinding/ painting shall be measured and paid separately under respective items of BOQ but cost of transportation to workshop and back to site, tools and plants shall be deemed included in quoted rate.

Spray painting of ceiling fan sweep size1200mm/ 1400mm, with synthetic enamel paint of white colour by spraying machine including filling cavities with filler, after cleaning all dusts and removing of dent from surfaces including writing of MES Nos. on bottom of fan with synthetic enamel paint of black colour, complete all as specified and as directed by Engineer-In-Charge.

Dismantling of worn out/ burnt out windings of ceiling fan 1200 mm sweep and re-winding the ceiling fan with the super enamelled copper wire of same size and same specifications including varnishing with approved quality, insulating materials and replacement of split/ safety pins, locking nut, check nuts, complete all as specified and as directed by Engineer-In-Charge.

Dismantling of worn out/ burnt out windings of ceiling fan 1400 mm sweep and re-winding the ceiling fan with the super enamelled copper wire of same size and same specifications including varnishing with approved quality, insulating materials and replacement of split/ safety pins, locking nut, check nuts, complete all as specified and as directed by Engineer-In-Charge.

Supply only Ball bearing suitable for ceiling fans of any type and size as existing, complete all as specified and as directed by Engineer-In-Charge.

Supply only Bush made out of Gun metal suitable for ceiling fans of any type and size as existing, complete all as specified and as directed by Engineer-In-Charge.

Supply only Capacitors, capacity 2.50 mfd, suitable for ceiling fans of any type and size, complete all as specified and as directed by Engineer-In-Charge.

Supply only Canopy suitable for ceiling fans of any type and size as existing, complete all as specified and as directed by Engineer-In-Charge.

Supply only Mild steel clamps with rubber reels, nuts, bolts and locking pin of any type and size suitable for ceiling fans for hanging, complete all as specified and as directed by Engineer-In-Charge.

Supply only Aluminium blade (sweep) for ceiling fan of 1200mm sweep, complete all as specified and as directed by Engineer-In-Charge.

Hanging arrangement for ceiling fan, where ever required, made of mild steel hook, 15/ 16mm bore, 600mm long, hollow pipe as down rod, including flat iron clamps, nuts bolts and washers at upper end, complete all as specified and as directed by Engineer-In-Charge.

Hanging only ceiling fans after repairing at any location as required and making connecting from ceiling rose to connector of ceiling fan including provision of cable from ceiling rose or connector to fan, complete all as specified and as directed by Engineer-In-Charge.

Replacement of Fan regulator, stepped type (multi-steps) electronic regulator for ceiling fan 1200/ 1400 mm sweep, 240 volts, 100 Watts, single pole, including connecting, testing, complete all as specified and as directed by Engineer-In-Charge.

Taking down carefully existing exhaust fans of any make and sizes from wall, cleaning externally, checking for defects and overhauling complete by opening, cleaning of bearing, stator, rotor winding, providing new fresh proper grade lubricants oil/ grease after cleaning and re-assembling after replacement of split/ safety pins, mild steel nuts and bolts, including replacement of old existing flexible cord connected from ceiling rose to fan, re-fixing the same in existing position or any other location, complete all as specified and as directed by Engineer-In-Charge. Note: Spare parts like ball bearings, gun metal bush, capacitors and rewinding/ painting shall be measured and paid separately under respective items of BOQ but cost of transportation to workshop and back to site, tools and plants shall be deemed included in quoted rate.

Dismantling of worn out/ burnt out windings of Exhaust fan of 275mm to 325mm sweep and re-winding the exhaust fan with the same size of super enamelled copper wire, varnishing with approved quality insulating varnish including replacement of split/ safety pins, rusted nut, bolt and washer, complete all as specified and as directed by Engineer-In-Charge.

Description all as per serial item No- 63.00 here-in-before but for Exhaust fan of 375mm to 450mm sweep size.

Supply only Ball bearing suitable for exhaust fans of size from 275mm to 375mm sweep, complete all as specified and as directed by Engineer-In-Charge.

Description all as per serial item No- 65.00 here-in-before but for Exhaust fan of 375mm to 450mm sweep size.

Supply only Capacitor, capacity 4.0mfd, suitable for dessert cooler, exhaust fan, complete all as specified and as directed by Engineer-In-Charge.

Supply only Capacitor, capacity 6.0mfd, suitable for dessert cooler, exhaust fan, complete all as specified and as directed by Engineer-In-Charge.

Supply only Louver shutters including nuts, bolts and washers suitable for exhaust fans of size 275mm to 375mm sweep, complete all as specified and as directed by Engineer-In-Charge.

Supply only Louver shutters including nuts, bolts and washers suitable for exhaust fans of size 375mm to 450mm sweep, complete all as specified and as directed by Engineer-In-Charge.

Spray painting of Exhaust fan of any size sweeps, with two coats synthetic enamel paint of approved colour by spray machine including filling cavities with filler, after cleaning all dusts and removing of dent from surfaces including writing of MES Nos. with synthetic enamel paint of black colour on motor of exhaust fan, complete all as specified and as directed by Engineer-In-Charge.

Supply and fixing in repair exhaust fan 230mm to 250mm sweep PVC body with louvers, 240 volts AC single phase, 50 Hz, ISI marked, including necessary work in wall/sheet, including connection cable of suitable size, nut bolt and other fixing material complete all as specified and directed by Engr-in-Charge. Make : Crompton Greaves/Havells/ Bajaj Note: Cutting of walls/wooden panel of any description and making provision of holes etc and making good to the disturbed surface to matching with the existing finish shall also be deemed to have been included in the quoted rates.

Supply and fixing in repair exhaust fan 300mm sweep PVC body with louvers, 240 volts AC single phase, 50 Hz, ISI marked, including necessary work in wall/sheet, including connection cable of suitable size, nut bolt and other fixing material complete all as specified and directed by Engr-in-Charge. Make : Crompton Greaves/Havells/ Bajaj Note: Cutting of walls/wooden panel of any description and making provision of holes etc and making good to the disturbed surface to matching with the existing finish shall also be deemed to have been included in the quoted rates.

Taking down the existing geyser, of any capacity and any make/ design (Vertical or horizontal) for repair/ servicing by disconnecting the electric and water supply connections including cleaning the inner tank of geyser and re-installing after repair/ servicing including making electric and water supply connections and making good to the disturbed portion of the wall including testing and checking for proper functioning of thermostat, heating element, indication lamps, cable connections, 15 Amps socket and plug top, inlet and outlet water pipes etc, complete all as specified and as directed by Engineer-In-Charge. Note: Spare parts shall be measured and paid separately under respective items of BOQ but cost of transportation to workshop and back to site, repairing, tools and plants shall be deemed included in quoted rate.

Supply only Indicator lamp round, flat, size and shape of existing specifications, working at 230 Volts, AC supply including making necessary connections, suitable for geysers of 25/ 35/ 50 liters capacity, complete all as specified and directed by Engineer-In-Charge.

Supply only Geyser water heating elements 1.50 KW, ISI marked, as per existing pattern fitted in the geyser, complete all as specified and as directed by Engineer-In-Charge.

Supply only Geyser water heating elements 2.00 KW, ISI marked, as per existing pattern fitted in the geyser, complete all as specified and as directed by Engineer-In-Charge.

Supply only Copper inner tank of existing shape, size and specifications including filling glass wool as insulating material, for geysers of 25 liters capacity, complete all as specified and directed by Engineer-In-Charge.

Supply only Copper inner tank of existing shape, size and specifications including filling glass wool as insulating material, for geysers of 35 liters capacity, complete all as specified and directed by Engineer-In-Charge.

Supply only Copper inner tank of existing shape, size and specifications including filling glass wool as insulating material, for geysers of 50 liters capacity, complete all as specified and directed by Engineer-In-Charge.

Supply only Glass wool of existing specifications or as per ISI specifications, best quality, for geysers of any capacity, complete all as specified and directed by Engineer-In-Charge.

Supply only Thermostat switch of existing specifications and having automatic cut off system, for geysers of 25/ 35/ 50 liters capacity, complete all as specified and directed by Engineer-In-Charge.

Supply only Safety brass valve, fusible, as per ISI specifications, suitable for geysers of 25/ 35/ 50 liters capacity, complete all as specified and directed by Engineer-In-Charge.

Supply only Internal water assembly of existing shape, size and specifications including required rubber gaskets, nuts, bolts and washers, for geysers of 25 liters capacity, complete all as specified and directed by Engineer-In-Charge.

Supply only Internal water assembly of existing shape, size and specifications including required rubber gaskets, nuts, bolts and washers, for geysers of 35 liters capacity, complete all as specified and directed by Engineer-In-Charge.

Supply only Internal water assembly of existing shape, size and specifications including required rubber gaskets, nuts, bolts and washers, for geysers of 50 liters capacity, complete all as specified and directed by Engineer-In-Charge.

Replacement of old unserviceable/ damaged PVC connections with new PVC connections 15mm size, 450mm long with brass union at both ends, for inlet water supply (cold water connection) , complete all as specified and directed by Engineer-In-Charge.

Replacement of old unserviceable/ damaged PVC connections with new PVC connections steel wire spirally reinforced, 15mm size, 450mm long with brass union at both ends, for outlet water supply (hot water connection), complete all as specified and directed by Engineer-In-Charge.

Replacement of PVC insulated FRLS cable with PVC insulated, unsheathed, multi-stranded copper conductor 1100 volt grade, size 2.50 Sqmm, three core for connection, complete all as specified and as directed by Engineer-In-charge.

Replacement of old unserviceable/ damaged plug top with new plug top, 15 Amps, 3-pin, 240 volts, complete all as specified and as directed by Engineer-In-Charge.

Spray painting of geysers with two coats of synthetic enamel paint of white colour by spraying machine including filling cavities with filler, after cleaning all dusts and removing of dent from surfaces including writing of MES Nos. with synthetic enamel paint of black colour on peripheral of geysers capacity of 25 litrs, complete all as specified and as directed by Engineer-In-Charge.

Spray painting of geysers with two coats of synthetic enamel paint of white colour by spraying machine including filling cavities with filler, after cleaning all dusts and removing of dent from surfaces including writing of MES Nos. with synthetic enamel paint of black colour on peripheral of geysers capacity of 35 litrs, complete all as specified and as directed by Engineer-In-Charge.

Spray painting of geysers with two coats of synthetic enamel paint of white colour by spraying machine including filling cavities with filler, after cleaning all dusts and removing of dent from surfaces including writing of MES Nos. with synthetic enamel paint of black colour on peripheral of geysers capacity of 50 litrs, complete all as specified and directed by Engineer-In-Charge.

Replacement of old unserviceable gun-metal with new gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe for 15mm bore pipe, complete all as specified and as directed Engineer-In-Charge.

Replacement of old unserviceable gun-metal with new gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe for 20mm bore pipe, complete all as specified and as directed Engineer-In-Charge.

Replacement of old unserviceable union with new union, galvanised iron, 15mm bore pipe, medium weight, ISI marked, complete all as specified and as directed Engineer-In-Charge.

Replacement of old unserviceable union with new union, galvanised iron, 20mm bore pipe, medium weight, ISI marked, complete all as specified and as directed Engineer-In-Charge.

Replacement of old unserviceable socket with new socket, galvanised iron, 15mm bore pipe, medium weight, ISI marked, complete all as specified and as directed Engineer-In-Charge.

Replacement of old unserviceable socket with new socket, galvanised iron, 20mm bore pipe, medium weight, ISI marked, complete all as specified and as directed Engineer-In-Charge.

Replacement of old unserviceable elbow with new elbow, galvanised iron, 15mm bore pipe, medium weight, ISI marked, complete all as specified and as directed Engineer-In-Charge.

Replacement of old unserviceable elbow with new elbow, galvanised iron, 20mm bore pipe, medium weight, ISI marked, complete all as specified and as directed Engineer-In-Charge.

Replacement of old unserviceable reducer socket with new reducer socket, galvanised iron, 20mmx15mm bore pipe, medium weight, ISI marked, complete all as specified and as directed Engineer-In-Charge.

Replacement of old unserviceable Tee equal with new Tee equal, galvanised iron, 15mm bore pipe, medium weight, ISI marked, complete all as specified and as directed Engineer-In-Charge.

Replacement of old unserviceable nipple (short length) with new nipple (short length), galvanised iron, 15mm bore pipe, medium weight, ISI marked, 100mm long, threaded at both ends, complete all as specified and as directed Engineer-In-Charge.

Replacement of old unserviceable nipple (short length) with new nipple (short length), galvanised iron, 20mm bore pipe, medium weight, ISI marked, 100mm long, threaded at both ends, complete all as specified and as directed Engineer-In-Charge.

Supply and fix ceiling fan of size 1200 mm sweep with BLDC Motor,high speed, single phase, 240Volts,AC, 50Hz,as approved colour and including down rod and connecting cable three core 0.75 sqmm round PVC sheathed from ceiling rose to fan connector and testing complete all as specified and directed.

Replacement of old unserviceable electric meter Water heater storage type (geyser), wall hanging, capacity 25 Litres, energy saving high density PUF insulation, BEE rating Five (5) Star, 230 Volts, single-phase, 50 Hz AC, rated power input not less than 1000Watt, complete all as specified. Make: Havells cat part No- Monza DX (GHWAMGSIB025)/ Bajaj cat part No-Calenta/ Jaquar cat part No- EPM-WHT-V025 (Elena Prime)

Replacement of old unserviceable electric meter with new multi-functional, single phase, temper proof meter, rating 10 to 60 Amps, accuracy class 1.0s, digital and LCD display with optional communication port with internal arrangements to take readings without power supply, conforming to IS: 1377, including transparent meter box and making necessary electric connections, complete all as specified. Make: L&T cat part No- WM101BC7DDHBOX or equivalent in Schneider/ L&T/ ABB/ Siemens.

Replacement of old unserviceable electric meter with new multi-functional, three phase, temper proof meter, 3Ph 4 W kWh Dir base mtg 240V 20- 100 A Acc 1and LCD display with optional communication port with internal arrangements to take readings without power supply, conforming to IS: 1377, including transparent meter box and making necessary electric connections, complete all as specified. Make: L&T cat part No- WR301BC8D10 or equivalent in Schneider/ ABB/ Siemens.

Supply and fixing in replacement of PVC insulated FRLS cable with multi-stranded copper conductor 1100 volt grade, size 6.0 Sqmm for connection from MCB distrubition board to Electric Meter by using clips in Meter box, complete all as specified and as directed by Engineer-In-charge. Note: Two runs of cable shall be measured as one unit of length.

Plug and socket board, metal enclosure with 2-pole and earth, including MCB 40 Amps Single Pole and Neutral and all internal wiring with copper wire, making necessary connections, complete all as specified and as directed by Engineer-In-Charge. Make: Havells cat part No- DHDPUSN020/DHDPUDP020 or equivalent in ABB/ Legrand/ L&T.

Amount of Schedule of credit of for Rs 1,55,860.00 shall be deducted from quoted amount.

M/S NARAYAN CONSTRUCTION

BINDRA ENGINEERS AND CO