REPAIRS REPLACEMENT OF PVC FLOORING TILING WORKS ALUMINIUM WOODEN JOINERY RAILING CEILING WORK TILING PLASTERING PLUMBING AND SANITARY WORK IN SOK OFFICE INS ABHIMANYU NAD DSC COMPLEX JETTY BLDG MES BLDG NAI FODC NBCD HARD CHUKAR SQUARDEN AT NSK

Amount

Dismantling of stone slabs & tiles of any description or thickness in floor aprons, cills etc laid bedded & pointed in any mortar complete all as specified and directed.

M&L for 100mm thick PCC (1:4:8) type D-2, using 40mm graded stone aggregate as in hardstanding, surface finished even & fair without using extra cement complete all as specified and as directed.

M&L for chequered cement concrete tile 30cmX30cmX 20 to 25mm thick set jointed and pointed in neat cement siurry in floor with grey cement and pig ments over 20mm thick screed bed or bedding layer of CM (1:6) complete all as specified and as directed.

M&L for 80 mm thick pre-cast cement concrete interlocking shot blasted, heavy duty mono layer paver block (coloured), machine pressed of approved size and shape laid and compacted with using vibrator complete all as specified & directed .

Material and labour for 50 mm thick sand cushioning for laying interlocking paver block complete all as specified and directed.

S&F Granite(of any type) tile of 20mm thick Machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete including 20 mm thick screed bed in cm (1:6) for laying floor fineshes complete all as specified and directed.

M&L for 100mm thick PCC (1:2:4) type B-2, using 40mm graded stone aggregate as in hardstanding, surface finished even & fair without using extra cement complete all as specified and as directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed.

M & L for Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 20 mm thick screed bed in cm (1:6) for laying floor fineshes complete all as specified and directed.

M&L non skid coloured ceremic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, as in floors over screed bed or bedding layer of morar 15 mm in cement mortar 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and as directed.

M&L for Glazed ceramic colour tiles 300x200x5 to 7 mm thick as in skirting,dados, risers to steps,etc,set and jointed in neat cement slurry and pointed in colour cement to match tiles, over and including 10 mm thick rendering or bedding layer in cement mortar 1:4 complete all as specified and directed.

M & L for Glazed ceramic tiles in vertical surface 450mmx300mm x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15 mm thick screed bed in cm (1:4) for laying floor fineshes complete all as specified and as directed.

S&F Vitrified ceramic coloured tiles 10mm thick (Square/Rectangular) polished area of each tile not exceeding 0.36 Sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed or bedding layer 15mm thick in CM 1:6 for laying floor finishes. Complete all as specified and directed by Engineer-in-Charge

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

Demolition of brick work built in cement or cement lime mortar including rubbish off the premises complete all as specified and directed.

M&L for Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

Rendering 15 mm thick in cement mortar 1: 6 on fair faces of brick work or concrete surfaces, finished fair and even complete all as specified and directed.

S&F in repair 12 mm thick vertical toughened glass as in door shutters / partition with including stainless steel SS-304 patch fitting fixed with Anchor fastner, each glass panes shall be exceeding 1.5sqm, but not exceeding 2 sqm each, all edges of glass shall be diamond polished of make as approved by GE.

S&Fin repair 30 mm dia stainless steel handle of 60 cm long and fixed to toughned glass as per manufacturer's instructions of make- Enox or equivalent make as approved by GE.

S&F in repair stainless steel glass lock fixed to toughened glass as per manufacturer's instructions of make-Enox or equivalent make as approved by GE.

Taking down aluminium doors shutters only and dismantling all members and reassembling the same with and including new screws, new rubber gasket, new aluminium beads & cleats of existing make and also refixng the handles & mortice lock in existing postiion with and including new screws including refixing the door shutters in same opening complete all as specified and directed. Note : If broken or unserviceable glass/aluminium wire mesh/floor spring/concealed lock is replaced same will be paid separately under relevant items.

Taking down aluminium windows shutters only and dismantling all members and reassembling the same with and including new screws, new rubber gasket, new aluminium cleats of existing make and also refixng the locks & roller in existing postiion with and including new screws including refixing the window shutters in same opening complete all as specified and directed. Note : If broken or unserviceable glass/aluminium wire mesh/floor spring/concealed lock is replaced same will be paid separately under relevant items.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) not exceeding 1.5 Square Metre each , removing from the site including cutting holes required for taking out existing hold fast etc. complete all as specified and as directed.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) exceeding 1.5 sqm not exceeding 4.0 Square Metre each , removing from the site including cutting holes required for taking out existing hold fast etc.complete all as specified and as directed.

Taking down of shutters of any description n exc 1 sqm each including iron mongrey & removing from site complete all as specified and directed by Engr-in-charge.

Taking down shutter from frame exc 1 sqm but n.exc 2 sqm each including iron mongrey & removing from site complete all as specified and directed by Engr-in-charge.

S & F 2nd class hard wood plain solid straight chowkats and frame of wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

S & F 30mm thick second class hard wood plain, framed,panelled shutters(any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and as directed.

S&F in repairs mild steel tubing of 25 mm dia with PVC coating for curtain rod fancy type including fancy type PVC rings and brackets (wall to wall or flush to wall) for securing to curtain rod, fixed in repair complete all as specified and directed.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm prelam PVC sheet and edges will be painted to match with prelam sheet, reinforced with MS square tube supplying and fixing in opening as per specification & drawing

S&F Factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick (stiles) with 2, 4 or 6 raised panel design with 2mm thick moulded prelaminated PVC sheet on the front face and 2mm prelam PVC sheet on back face, supplying & fixing in the frame at site as per specification & drawing

S&F for aluminium door/window/ventilator/partition, made out of extruded powder coated aluminium sections, with sliding or openable shutters including frame & necessary jointing cleats, glazing clips, powder coated aluminium snap beading,screws etc, complete and also including powder coated aluminium fittings such as cobra hinges, butt hinges, tower bolts, hooks & eyes, peg stays and handles including connected items,with and including making good to the disturbed portion with its original specifications complete all as specified and directed.

S&F for concealed star lock powder coated for aluminium window fixed as per manufacturers instructions complete all as specified & as directed.

S&F aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repair aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal/wooden frame complete all as specified and directed.

S&F 4 mm thick sheet glass, ordinary quality , glazing with oil putty or with wooden beads, area n. exceeding 0.50 Square Metre each pane complete all as specified and as directed.

S&F for rubber beading suitable for fixing 4mm / 5mm thick glass in aluminium window / doors etc complete all as specified and as directed.

S&F for aluminium anodised grill of design DG 104 pattern made out of 10mm dia rod fixed with and including standard aluminium frame of F section of size 23.40mmx15.30mm & 1.4mm thick all as per manufactures instructions complete all as specified & directed. Make- Deco grill or equivalant

S&F aluminium (extruded section) body door closer hydraulically regulated, designation No.2, universal type, suitable for door shutter of 701 to 850 mm in width & of weight between 36 to 60 kg & fixed in repairs complete all as specified and directed.

S & F Mortice lock vertical type size 100mm 04 lever complete all as specified and as directed.

S & F in repair Mortice lock vertical type size 100mm 04 lever complete all as specified and as directed.

S & F Pre-laminated 18/19 mm thick partilcle baords, exterior grade, prelaminated both sides with decorative choice lamiantions complete all as specified and as directed.

S&F butt hinges size 100 extruded aluminium alloy with galvanised mild steel hinges pin anodised and fixed C-21 complete all as specified and as directed.

S&F Aluminium handle, cast type anodized size of handle 150 mm complete all as specified and as directed.

S&F 125mm long Extruded aluminimum alloy handles, fabricated type complete all as specified and as directed.

S&F Aluminium anodized, barrel tower bolt of extruded section, length of bolt 150 mm complete all as specified and as directed.

S & F in repairs Bib tap15mm dia standard of CP any colour screwd for iron pipes and fixed (minimum weight 15mm - 90 gms ) complete all as specified and directed.

S & F in repairs stop valve of CP any colour high presure screwd for iron pipes and fixed (minimum weight 15mm - 90 gms ) complete all as specified and directed.

Supply and fixing in repair PVC flushing cistern of 10 ltrs capacity including flush pipe PVC connection etc complete all as specified and directed.

Supply and fixing in repair 15 mm bore pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with long screws shanks and fly nuts complete all as specified and directed.

Supply and fixing in repair white vitreous china wash down water closet pan (Pedestal pattern) with and including P or S trap, plastic seat cover closed pattern, fixing bolt etc complete all as specified and directed.

S & F in repairs Vitreous China Half stall urinal White complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement complete all as specified and directed

S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, of size 580 mm x 440 mm white with integral foot rest complete including provn of cement concrete bedding and connection to trap, outgoing flushing pipe, anti syphonage pipe,CI trap 100 mm Bore of pipe etc complete all as specified and directed.

S & F in repair vitreous China wash hand basin white, flat back of size 550x400mm fixed on and including cast iron cantilever bracket, 32mm dia waste coupling including fixing of tap, waste fitting etc complete all as specified and directed.

S&F 32mm dia PVC waste pipe for WHB and urinals complete all as specified and directed.

S&F in repair 32mm dia PVC waste pipe for WHB and urinals complete all as specified and directed.

.M&L for providing 15 mm dia PVC connection 450mm longwith brass fly nut complete fixed in repairs complete all as specified and directed.

M&L for 100 mm diameter of outlet PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan necks, etc, removal to store (measured overall as fixed along the centre line over fittings and accessories).

S &F 160 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall with stock clamps complete all as specified and directed.

S &F 160 mm dia PVC (SWR) half of pipes single socketed in any length for valley gutter, rainwater, ventilating pipes etc. complete all as specified and directed.

S&F for PVC (SWR) bends any radius 160mm bore complete all as specified and as directed

S&F in repair 75mm bore PVC(SWR) bends any radius with access door complete all as directed.

S&F in repair 110mm bore PVC(SWR) bends any radius with access door complete all as directed.

S&Fin repair 75mm PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&Fin repair 110mm PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

Taking up or down steel tubing and connections 15 mm bore complete all as specified and directed.

Taking up or down steel tubing and connections 20 mm bore complete all as specified and directed.

M&L for 15 mm dia steel tube medium grade galvanized with all fittings and fixed complete in wall, ceiling or laid in floor complete all as specified and directed.

M&L for 20 mm dia steel tube medium grade, galvanised with all fitting and fixed complete to wall complete all as specified and directed.

M&L for PCC 1:3:6 type C1 using 20mm agg for fixing angle iron post etc all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed.

S & F steel work as in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS 1161 1979 grade St 240 complete all specified and directed.

S&F for rolled sections of FE 410W (Gde-E-250)as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all specified and directed.

Dismanteling to plain or corrugated CGI sheet any gauge, thickness including nainital or similar pattern as in roof covering complete all as specified and directed.

S&F 0.50mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws etc complete all as specified and directed.

S&F 0.50mm thick pre-painted galvalume aluminium zinc coating GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in valley gutter, ridge hips etc. fixed with self tapping screws etc complete all as specified and directed.

M&L Preparation of new previously untreated steel and iron surfaces of any description not other wise described over 10 centimetre width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M & L applying two coats of synthetic enamel paint on new wooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces complete all as specified and directed.

Material and labour for three coat white wash on walls including preparation of new wall surfaces complete all as specified and as directed

Material and labour for preparation of new plastered surfaces of walls and applying two coat of oil distemper over and including 1-2mm thick wall care putty, and filling cavities with wall care putty filling after completely removal of existing treatment complete all as specified and as directed.

M&L for preparation of new or previously untreated plastered surfaces of walls and applying two coats of acrylic antifungal paint exterior grade paint on one coat of primer complete all as specified and as directed.

M&L for preparation of new or previously untreated plastered surfaces of walls and applying two coats of acrylic antifungal paint exterior grade paint plain or camouflage pattern on one coat of primer complete all as specified and as directed.

Dismantling wall and ceiling boards or insulation boards, any thickness, any description, including cover fillets complete all as specified and directed.

S&F 10 to 12mm thick plaster of paris sheets fix in ceiling with and including grid made out of angles and tees of one mm thick G I sheets fixed at not more than 45 cm centre to centre in both directions. GrId secured by vertical tie of GI sheet angle at not more than 1.2m centre to centre in both directions. The veritical tie of GI sheet angle shall be fixed with M S dash through fastners of 8 mm dia. The ceiling is to be provided at different profiles like curved, flat, sunk and or raised mouding, the joints shall be filled with plaster of paris complete all as directed by Engineer-in-Charge.

S&F for false ceiling with Armstrong XL 24 mm grid system of grid size 600x600mm with 14 mm thick ceiling board of RH-90 of Armstrong. Grid shall be suspended from ceiling using 4 mm dia pre straighten GI wire with 6 mm nylone rawl plug & screws at 1200 mm intervals complete all as manufacturers instructions and as directed.

S&F for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.complete all as directed by Engineer-in-Chage

S&F for Solid PVC Wall Lining consisting of 5mm thick Plain or wooden colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing.complete all as directed by Engineer-in-Chage

Complete removal of existing water proofing treatment of any description in any position including cleaning, wire brushing, watering, removal of debris upto 1500mtr distance as directed by Engineer-in-charge complete all as specified and as directed.

M&L for brushing neat cement slurry with 3.00 Kg of cement per Sqm complete all as specified and directed.

M&L for 40mm thick PCC (1:2:4) type B-1, using 20mm graded stone aggregate as in roof pedding, sub floor surface finished even & fair without using extra cement complete all as specified and directed.

M&L for rendering 20 mm thick cement plaster in CM (1:3) on roof top surface finished even and fair including WPC by weight of 3% of total cement content complete all as specified and as directed. Note : WPC will be measured separately

M&L for cleaning the new surfaces concrete with wire brushing and applying water proofing treatment as under:- (i) Apply oil bound bitumen primer @ 0.40 Litre/Sqm manufactured by the same agency as that of APP with density of 0.87 to 0.89 Kg/Litre at 25 degree cesius on the pepared dry roof surface. (ii) Laying torch applied APP polymer modified membrane 4mm thick with non-wooven ployster mat as reinforcement weighing n.less than 4.50 Kg/Sqm with white gravel/mineral finished by thermo fusion process all as decribed under particular specification The APP membrane shall be of:- (a) M/s Taxsa India Ltd Mumbai-'MOPLY FP OR (b) M/s Chemical Adhesive (P) Ltd-'Chemistic'OR (c) M/s STP-'Super Thermolay' OR (d) M/s India Ltd, Chennai-'Hyper Plus' or (e) M/s Percept Engrs Pvt Ltd, Kochi-POLYPLUS NOTE: The contractor will be permitted to use materials procured from any one of the manufacturer mentioned above. However , the materials for the entire work shall be of from one manufacturere only.

Complete removal of existing PVC tiles /sheets, of any description in any position including cleaning, wire brushing, watering, removal of debris upto 1500mtr distance complete all as specified and as directed

S&F for PVC tiles /sheets, of 2mm thick laminated plain coloured homogenous, laid with approved rubber based adhesive in floors all as specified and directed.

Removing Chipping ,removing carefully loose and broken concrete by chiselling ,low impact hammer /picking etc upto a depth of 80 mm or of complete loose portion from soffit of slab, column, beams and similar structural members, cutting edges, clearing the dismantled portion with wire brushes etc to remove dust, dirt and other foreign particles etc and washing with clean water with pressure including necessary scaffolding etc,and removal of debris to out of MD land, complete all as specified and as directed.

M&L for Clean existing reinforcement with wire/ rotary wire brush, making the surfaces free from loose material dirt etc. complete and applying two coats of alkaline rust converting primer FEOVERT of Krishna Conchem or Roff rust cleaner of Piddilite or Dr. Fixit Rust removal or ShaliRust of STP Ltd. on the rebars, including cleaning the reinforcement, wirebrushing to remove loose rust spalls, wash the rebars with clean water within 3 min and wipe it dry.

M&L for applying two coats of Epoy based Zinc primer in a span of four hours over the treated rebars and allow to dry for six hours. The application shall be by brush. Epoxy primer for steel of make / brand - Corroseal-ZR of Krishna Conchem or Dr. Fixit Epoxy zinc primer complete all as specified and directed.

M&L for cleaning all loose laitance on the concrete substrate and applying one coat of epoxy bonding agent on exposed concrete surface to ensure bond between old concrete & new concrete by brush application. Make / brand Monobond SBR of Krishna Conchem or Dr. Fixit epoxy bonding agent or Shalicrete URP of STP Ltd.

M&L for rendering minimum 20mm to 40 mm thick polymer modified mortar in cemet mortar (1:3) with graded quartz sand with additive Monolith - PMM of Krishnaconchem or polymer mortar HB of Dr. Fixit or Shalifix RM SG 01 of STP Ltd. 15% by weight of cement in one coat with and including curing as per manufacturer's instruction complete all as specified and as directed

M&L for Providing and applying jacketing around columns with Micro concrete (Molith-MC) M40 including all lifts, shuttering, drilling holes and fixing shear anchor as per specification complete.Note: Reinforcement shall be measured and paid separately.(Rates including jacketing, formwork and micro concrete)

M&L for applying concrete protection coating on finished structural members exposed to atmosphere make or brand IPNET of Krishna Conchem or New Coat from Dr. Fixit complete all as specified and directed.

M&L for Drilling and fixing Rohibb Teflon nozzles in RCC members, including drilling holes of 12mm dia, 50 to 100mm deep holes. Works shall be carried out as under :- (i) Cleaning of holes. Clean the holes by air blower prior to fixing nozzles. (ii) Fixing of nozzles. Insert 12mm dia. Rohibb Teflon nozzles in cleaned holes. External end of nozzles to be machine to receive outlet of grouting gun.Fix it inside the holes by applying thixotropic epoxy putty to ensure complete sealing. Cure the system for min.12 hrs. (iii) Cutting of nozzles. Cut the nozzles by chisel after completion of grouting without damaging structural elements. (iv) In case crack upto 2mm wide, fix the injection nozzels directly over the cracks, at intervals of 6 to 9 inches, using a drilling machine. Fix PVC/MS nozzels in these holes with fast-setting epoxy putty & let it dry for 2 to 3 days. Also, seal the crack between the ports with epoxy putty. (v) In case where the crack is wider than 2mm upto 4 to 5mm, drill holes at the sides of the crack in a staggered fashion, at intervals of 6 inches and affix them with epoxy putty as mentioned above. (vi) Also, seal the face of the carck with a liberal application of the epoxy putty.

M&L for Injecting of site mixed cement slurry grout, mixed in specified proportion containing cement, sand water with addition of plasticizers (approved make) & migratory corrosion inhibitors, water cement ratio shall be varied between 0.5 to 1.0 for each hole, shrinkage compensating cement slurry mixed to a lump free fresh creamy consistency ,Mixing shall be done by mechanical mixer continuously stirring mechanically to keep cement particles in suspension. Injection of approved/specified grout by means of pump at a pressure of 3-5 Kg/cm2 etc complete till the grout mix flows out from the nozzle indicating complete filling of grout in the holes drilled. Make / brand of Epoxy grout - Dr. Fixit Epoxy injection or EPCO KP-HP-250 of M/s Krishna Conchem or Shaligrout EI of STP Ltd.

M&L for Injecting low viscosity (3-5cps) high molecular weight monomer by pressure and using mechanized injector gun with accessories till nozzles refuses to accept the grout, Including,Mixing of materialas:Mixing of material components(part a&b) in the required quantities as per manufacturer's instruction by weigh batching.Grouting:Fill the grouting gun with concrete penetrating corrosion inhibitor EPCO-KP-100/Protectsil CIT or Ferogard 903. Maintain desired pressure in the gun by air compressor; maintain the pressureat exit(2 to 3kg/cm2) by monitoring pressure guage at exit.Grout the material through prefixed nozzles in the structural elements@ 100ml per nozzle. Repeat the process for all the nozzles.

Replacement of steel reinforcement with TMT bars of appropriate size where 30% of cross section is reduced including dismantling of rusted steel complete all as specified and directed.

Providing and fixing additional main steel bar or stirrupsof designed diameter in various structural elements like column ,beams and foundations including drilling ,bending and fixing the bars with epoxy putty etc. complete (Steel provided on the basis of 1% of volume of concrete).

Supply only water proofing compound complete all as specified and directed.

S & F in repair Stainless steel hand railing with post as per design made out SS304 complete all as directed by Engineer-in-Chage

ECOBUILD

Shri Krishna Trading Corporation

Parmatma Enterprises

Expert Electric Service And Stores

Sagar Electricals

S.P.TRADERS

pk Enterprises