WBPWDTE/AE/BESD-I/e-NIQ 05 of 2025-26

Amount

Supply and Drawing 1.1 KV single core stranded 'FRLS' PVC insulated & unsheathed copper wire (make-Finolex/Havells/KEI/ Gloster/ Mescab )of following sizes in thick heavy gauge polythene pipe and necy. connection as required incl. cutting channel of (40mmx40mm) /(43mmx43mm)size on masonary wall with S&F heavy gauge 19mm/25mm dia 3mm thick polythene pipe by means of iron hooks and mending good damages to building works PageNo. E-2 Item No.-3-4 & Page No. E-9 Item No. 1 2 x 4 sqmm + 1 x 2.5sqmm (for AC )

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Make: Legrand/Crabtree/Wipro/Goldmedal), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc as per G.S. PageNo. E-17 Item No.-5 (a)

Supply & Fixing 240 V,25 A, 3 pin Modular type plug top with indicator (Make: Legrand /Crabtree /Wipro / Goldmedal) & necy. Connections.

Supply and delivery of Non-inverter wall mounted SPLIT room air conditioner having the following major specification:- (a) Minimum Cooling capacity required: 18000 BTU / Hr. or Higher (b) Minimum Star rating- 3 Star or higher (c) Rated voltage-230V +/-5%, Frequency-50H2 (d) Compressor type- Rotary. (e) Mini. Room Discharge air flow rate - 620 CFM or higher (f) Condenser type -Copper condenser coil (g) Minimum Tonnage required: 1.5T or higher (h) Refrigarent- R32/R4 10A (i) Cordless Remote Arrangement with all modernize provision of Temperature setting, Fan Speed option ( Low/Medium/High), Auto swing, Air Direction Setting, Timer facility, Turbo operation setting, Air Condition Arrangement and others. inclu. delivery charges, (Make: Mitsubishi Electric Model- MS/MU- AGZ18VF/O- General Model- ASGA18BMWA-B/ Mitsubishi Heavy Industries).

Installation, Testing & commissioning of 1.5/2.0 Tr. Split type AC both indoor/ outdoor unit incl. S& F of 40 X 40 X 5 mm MS angle iron frame for installation of ODU and sealing of the holes in wall created during the copper pipe connection between IDU & ODU by proper sand-- cement plastering and painting (both inside and outside) to match up with the original finish mending good the damages to complete the instn as per direction of EIC.

Supply, Installation & commissioning of hard/ soft copper (0.6mm) refrigeration pipeline (Make- Ryoku/Rajco/Mandev) with 9 nm nitrile rubber tube Insulation on following sizes of suction line 8 Liquid Line copper pipe with proper insulation tape (Make-Accoflex, Armacell/ K-Flex, complete with fittings, elbows, bends, supporting arrangement on walls 5/8'' OD

S& Laying 4 core 2.5 sqmm PVC insulated & unarmoured copper wire (make-- Finolex/Havells/KEI) for 1.5/2 Tr. Split AC machine (extra length for distance of ODU & IDU exceed 3 mtr.)

S & F of flexible PVC high quality water carrying pipe of proper size for draining water from already installed AC to any available (nearest) drain water pipe or near to ground level and the pipe must be properly saddled with the wall incl. proper insertion of the flexible pipe to drain water pipe and sealing the entry with required materials like PVC tape, High quality sealing the entry with required materials like PVC tape, high quality sealing gum etc. as reqd. All these arrangement for fixing must be arranged by the agency itself as per direction of EIC.

Supply & Fixing 6 nos 240 V, 20A, plug socket with separate 20 APiano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F required size MS (16SWG) switch board and bakelite /perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required

Supply and Delivery of Timer DB 1) 230V, Upto 16 A capacity 24 Hrs Analog Blectromechanical Time Switch(Make:- Lauritz Knudsen (L&T) Cat No: -AUTSO3ANA0O/ Legrand/SEIMENS) 2) 2 Pole Power Contrcator (Make:- Lauritz Knudsen (L8T) MNX 22-2P Cat No-CS90238/ Legrand/ seimens), 3) 20A SP MCB. (Make:-ABB/Seimens/Lauritz Knudsen (L&T)/Legrand) 4) 32A DP Isolator. (Make:- Legrand/Lauritz Knudsen (L&T)/Seimens) 5) Toggle Switch. (Make:- Lauritz Knudsen(L8T)/ Legrand 11.00 NS or equivalent make) 5) (2+12 Way) SPNDB [Make:- Legrand/Seimens/Lauritz Knudsen(L&T) 6) Bakelite basc with FP bolt type stud / Terminal block incl S& F Neutral Bar cte with this box for termination of power. 7) The complete arrangement must be wiring by 2.5 Sq mm PVC insulated Cu wire with suitable length indl socketing /lugs etc as per requirement & direction of EIC (Make - Legrand / Lauritz Knudsen(L&T)/ Seimens )

Karmakar electrical Repairing Works (BID ID -6696027)

UJJWAL MUKHERJEE (BID ID -6683269)